Table Of Contents

Configuring Routing Protocols

Configuring Routing Protocols

---

In addition to static routing, the Cisco MWR 2941 supports the following routing protocols:

•OSPF—An Interior Gateway Protocol (IGP) designed expressly for IP networks that supports IP subnetting and tagging of externally derived routing information. OSPF also allows packet authentication and uses IP multicast when sending and receiving packets. For instructions on how to configure OSPF, see the IP Routing: OSPF Configuration Guide, Cisco IOS Release 15.0S.

•IS-IS—An Open System Interconnection (OSI) protocol that specifies how routers communicate with routers in different domains. For instructions on how to configure IS-IS, see the IP Routing: ISIS Configuration Guide, Cisco IOS Release 15.0S.

•BGP—An interdomain routing protocol designed to provide loop-free routing between separate routing domains that contain independent routing policies (autonomous systems). For instructions on how to configure BGP, see the IP Routing: BGP Configuration Guide, Cisco IOS Release 15.0S.

---

---

Note For information about Bidirectional Forwarding Detection (BFD) including sample routing configurations with BFD, see Chapter 21 "Configuring Bidirectional Forwarding Detection."

---