MIB
|
Description
|
CISCO-AAA-SERVER-MIB.my
|
Provides configuration and statistics reflecting the state of authentication, authorization, and accounting (AAA) server operation within the node and AAA communications with external servers.
|
CISCO-BITS-CLOCK-MIB.my
|
Provides information on Building Integrated Timing Supply (BITS) clocking sources and operation modes. The MWTM can generate notifications to indicate when clocking sources change roles or become unavailable.
|
CISCO-CONFIG-MAN-MIB.my
|
Provides configuration management, primarily by tracking changes and saving the running configuration. This MIB represents a model of configuration data that exists in various locations:
• running—In use by the running system
•terminal—Logical or attached hardware
•local—Saved locally in NVRAM or flash
•remote—Saved to a server on the network
|
CISCO-ENTITY-FRU-CONTROL
CAPABILITY.my
|
Provides additional capabilities for various platforms that are needed by the CISCO-ENTITY-FRU-CONTROL-MIB.
|
CISCO-ENTITY-FRU-CONTROL-MIB.my
|
Monitors and configures the operational status of Field Replaceable Units (FRUs) of the system listed in the Entity-MIB (RFC 2037) entPhysicalTable. FRUs include assemblies such as power supplies, fans, processor modules, interface modules, and so forth.
|
CISCO-ENVMON-MIB.my
|
Provides environmental monitoring information on Cisco ITPs.
|
CISCO-EPM-NOTIFICATION-
MIB.my
|
Defines the trap structure that carries the identity and status information of the managed object. The MWTM can send internal events as traps defined in this MIB to third-party network management system (NMS) applications for further processing.
|
CISCO-FLASH-MIB.my
|
Provides management of Cisco Flash Devices.
|
CISCO-HSRP-EXT-MIB.my
|
Provides an extension to the CISCO-HSRP-MIB which defines Cisco's proprietary Hot Standby Routing Protocol (HSRP). The extensions cover assigning of secondary HSRP IP addresses and modifying an HSRP group's priority by tracking the operational status of interfaces.
|
CISCO-HSRP-MIB.my
|
Provides a means to monitor and configure the Cisco IOS proprietary Hot Standby Router Protocol (HSRP). Cisco HSRP protocol is defined in RFC2281.
|
CISCO-PROCESS-MIB.my
|
Shows memory and CPU utilization on Cisco nodes. CPU utilization gives a general idea of how busy the processor is. The numbers are a ratio of the current idle time divided by the longest idle time.
|
CISCO-RF-MIB.my
|
Provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1-to-1 redundancy on processor cards. Redundancy is concerned with the duplication of data elements and software functions to provide an alternative in case of failure.
|
CISCO-SMI.my
|
Defines the Structure of Management Information for the Cisco enterprise.
|
CISCO-SYSLOG-MIB.my
|
Provides a means of gathering syslog messages generated by the Cisco IOS. The MWTM can send internal events as traps defined in this MIB to third-party NMS applications for further processing.
|
CISCO-TC.my
|
Defines textual conventions used throughout Cisco enterprise MIBs.
|
ENTITY-MIB.my
|
Module that represents multiple logical entities supported by a single SNMP agent. This MIB is based on RFC 2737. For more information on entity MIBs, see RFC 2037 section 3.
|
IANAifType-MIB.my
|
Defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
|
IF-MIB.my
|
Describes generic objects for network interface sublayers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
|
IMA-MIB.my
|
Module that manages ATM Forum Inverse Multiplexing for ATM (IMA) interfaces.
|
INET-ADDRESS-MIB.my
|
Defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix.
|
PerfHist-TC-MIB.my
|
Provides Textual Conventions to be used by systems supporting 15 minute-based performance history counts.
|
RFC1213-MIB.my
|
Provides basic management information on the ITP (RFC 1213).
|
RMON-MIB.my
|
Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
|
OLD-CISCO-INTERFACES-MIB.my
|
Defines interfaces for the Cisco enterprise.
|
SNMP-FRAMEWORK-MIB.my
|
Defines the SNMP Management Architecture.
|
SNMP-TARGET-MIB.my
|
Defines the MIB objects that provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
|
SNMPv2-CONF.my
|
Defines SNMPv2 conformance.
|
SNMPv2-MIB.my
|
Defines SNMPv2 entities.
|
SNMPv2-SMI.my
|
Defines the Structure of Management Information for SNMPv2.
|
SNMPv2-TC.my
|
Defines textual conventions for SNMPv2.
|
Feedback