Cisco Active Network Abstraction Managing MPLS User Guide, 3.6.5 - Running a VPN Leak Report Command [Cisco Active Network Abstraction]

Table Of Contents

Running a VPN Leak Report Command

Syntax

Output

Examples

Get the VPN Leak Report

VPN Leak Report Results

IVPNLeakReport

IVpnLeak

Running a VPN Leak Report Command

This appendix describes running a VPN Leak report command.

Note You should understand the BQL portions of the Cisco Active Network Abstraction 3.6.5 Customization User Guide before attempting to use the information in this appendix.

A VPN leak report provides a list of all the links that exist between VPNs.

Syntax
Item

Code and Explanation
General Syntax
<command name="CreateVpnLeakReport"> 
<param name="oid"> 
<value>{[VpnLeakReport]}</value> 
</param> 
</command>
Output

The output of a script is the IMO object: "IVpnLeakReport". For a description of this object, see IVPNLeakReport.

Examples

Get the VPN Leak Report

The example below describes running the command.
<command name="CreateVpnLeakReport">
<param name="oid">
<value>{[VpnLeakReport]}</value>
</param>
</command>
VPN Leak Report Results

IVPNLeakReport

The IVPNLeakReport is the IMO object that contains the result of a VPN leak report execution. Each IMO object has a property array of IVpnLeak.

The object property is:

•Results—Contains an array of IVpnLeak and each IVpnLeak in turn contains each leak that was detected.

IVpnLeak

The IVpnLeak is the IMO object that describes a single VPN leak. Each IMO object has a property array of IVpn.

The object property is:

•VPNs—Contains an array of IVpn and each IVpn in turn contains each VPN that was part of the leak (usually two).