Feedback
Table Of Contents
Technical Specifications
The Cisco standalone video encoders (CIVS-SENC-4P and CIVS-SENC-8P) can be used to convert analog video sources into digital formats so they can be integrated into a networked IP based video surveillance system. The 4-Port model (CIVS-SENC-4P) supports four analog video inputs, while the 8-Port model (CIVS-SENC-8P) supports eight analog video inputs. Both devices can be used in a stacked configuration, or they can be rack mounted. A power supply is included with both. Table A-1 lists key features and technical specifications for both encoder models.
Table A-1 Technical Specifications
Protocols Supported
Supports two simultaneous video streams. The two streams can be compressed in H.264, MPEG-4 or MJPEG formats, in various combinations of resolution, frame-rate and bit-rate combinations.
Supports a single video stream per port. The stream can be compressed in H.264, MPEG-4 or MJPEG formats and configured with different resolution, frame-rates and bit-rates.
PTZ Interface
Provides a RS-485 interface to allow for connection to PTZ control units supporting the Pelco-D protocol, in order to control Pan-Tilt-Zoom functions in an external camera or PTZ mount.
Provides a RS-485 interface to allow for connection to PTZ control units supporting the Pelco-D protocol, in order to control Pan-Tilt-Zoom functions in an external camera or PTZ mount.
Digital Inputs/ Outputs
Has 4 Digital Outputs and 4 Digital Inputs to connect to/from external sensors.
Has 8 Digital Outputs and 8 Digital Inputs to connect to/from external sensors.
Web Interface
Supports Internet Explorer® 8.0 Web browser for remote setup and administration.
Supports Internet Explorer® 8.0 Web browser for remote setup and administration.
Video Management
The encoder connects to Cisco Video Surveillance Manager Version 6.3.2 and later.
The encoder connects to Cisco Video Surveillance Manager Version 6.3.2 and later.
Features and Benefits
•
Up to D1 Resolution per channel
•
•
•
•
•
•
•
•
•
•
AnalogVideo Input Ports
4
8
Digital Alarm Inputs
4
8
Digital Alarm Outputs
4
8
Security
Password protected administrative interface.
HTTPS access to the administrative interface.
Password protected administrative interface.
HTTPS access to the administrative interface.
Certifications/Ratings/Patents
CE, FCC Class B, C-Tick UL /cUL Listed
CE, FCC Class B, C-Tick UL /cUL Listed
Port
RJ-45 connector for 100/1000 Base-TX Auto MDI/MDI-X
RJ-45 connector for 100/1000 Base-TX Auto MDI/MDI-X
Cable Type
Cat5 or better
Cat5 or better
Power Input
12VDC/24VAC (Power supply included)
12VDC/24VAC (Power supply included)
Power Consumption
24 W (Max)
24 W (Max)
Local Storage
SD/SDHC slot
Operational Temperature
50° to 122° F (10° to 50° C)
50° to 122°F (10° to 50°C)
Operational Humidity
20% to 80%, noncondensing
20% to 80%, noncondensing
Dimensions
189 mm (L) x 153 mm (W) x 49.3 mm (H)
189 mm (L) x 153 mm (W) x 49.3 mm (H)
Weight
800g
837g
Video Encoding
H.264, MPEG-4 and MJPEG (for both PAL and NTSC)
H.264, MPEG-4 and MJPEG (for both PAL and NTSC)
Video Streams
Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream.
Single stream per port.
Audio
G.711 audio encoding (64 Kbps) µ-Law, or A-Law mode selectable. Audio input ( up to 1Vrms) 3.5 mm Phone Jack Audio output Terminal block x 4.
Supports two-way audio (Per channel) Supports audio mute.
G.711 audio encoding (64 Kbps) µ-Law, or A-Law mode selectable. Audio input ( up to 1Vrms) 3.5 mm Phone Jack Audio output Terminal block x 8.
Supports two-way audio (Per channel) Supports audio mute.
PTZ Serial Interface
RS-485 Half Duplex, supporting Pelco-D protocol
RS-485 Half Duplex, supporting Pelco-D protocol
Available Resolutions
See Table A-2.
See Table A-3.
Minimum PC Client Requirements
•
•
•
•
•
•
•
•
•
•
•
•
The following are the definitions of resolutions used in the table:
•
•
•
The following are definitions of resolutions used in the table:
•
•
•