-
Provisioning Guide
-
Preface
-
Chapter 1 - Provisioning Overview
-
Chapter 2 - Initial Softswitch Provisioning
-
Chapter 3 - IAD Residential Subscriber Provisioning
-
Chapter 4 - ATA 18x Residential Subscriber Provisioning
-
Chapter 5 - Cable Subscriber Provisioning
-
Chapter 6 - CALEA Provisioning
-
Chapter 7 - Feature Provisioning
-
Chapter 8 - Centrex, MLHG, and Voice Mail Provisioning
-
Chapter 9 - Route Provisioning
-
Chapter 10 - Announcement Server Provisioning
-
Chapter 11 - Provisioning Channel-Associated Signaling
-
Chapter 12 - SS7 Provisioning
-
Chapter 13 - H.323 Provisioning
-
Chapter 14 - SIP Subscriber Provisioning
-
Chapter 15 - ENUM Provisioning
-
Appendix A - Cause Code to Announcement ID Mappings
-
Appendix B - Use Dial Plan Token Routing Impact
-
Appendix C - National Call Type Processing
-
Appendix D - Factory Installed Scripts
-
Appendix E - Defined Cause Codes
-
Appendix F - Admission Reject Cause Code Mapping
-
Appendix G - H323 Trunk Group Cause Code Mapping
-
Appendix H - Session Initiation Protocol Cause Code Mapping
-
Appendix I - Sample Asia Provisioning Script
-
Feedback
Table Of Contents
Vertical Service Code Provisioning
NANP Dial Plan VSC Provisioning
Non-NANP Dial Plan VSC Provisioning for Subscriber and Centrex
Configurable Default Values for Subscriber Provisioning
Provisioning the Default Value for an Optional Token
Checking the Integrity of the Configured Default Value
Provisioning a Default Value using a Command Alias
Viewing the Factory Default Value
Restoring a Factory Default Value
Add 8XX to the Office Service IDs
Active Call Information Display
Alerting Notification to Third Party Feature Server
Precedence for Provisioned Values
Anonymous Call Rejection and A/D
Alternate Activation and Deactivation Method
Office Provisioning—Call Forwarding for Unreachable Condition
Alternate Activation and Deactivation Method
Alternate Way to Activate and Deactivate CFC
Alternate Activation and Deactivation Method
Alternate Activation and Deactivation Method
Call Forwarding Variable for Basic Business Groups
Alternate Activation and Deactivation Method
Alternate Activation and Deactivation Method
Alternate Activation and Deactivation Method
Alternate Activation and Deactivation Method
Calling Line Identity Presentation, Restriction
Calling Number Delivery Blocking
Caller Identity Delivery Suppression-Delivery
Caller Identity Delivery Suppression-Suppression
Provisioning for IVR Collection of Account/Authorization Codes
Direct Call Pickup Without Barge-In
Direct Call Pickup With Barge-In (DPU)
Distinctive Alerting/Call Waiting Indication
Alternate Activation and Deactivation Method
Group Speed Call: 1-Digit and 2-Digit
Alternate Activation and Deactivation Method
Incoming Simulated Facility Group
IP Transfer Point Non-Stop Operation
NSO Configuration: D-Link for ISUP with ASP Load Sharing
NSO Configuration: D-link for TCAP with ASP Load Sharing
Local Number Portability for ANSI/North America
Local Number Portability for ITU Local BTS Database Query
NOA Routing and Dial Plan Provisioning
Allow ACQ or QoR Query on Incoming Trunk Calls
Destination and Call Type ACQ Control
Outgoing Carrier Call LNP ACQ Query Control
Multi-Lingual Support for Interactive Voice Response and Announcements
Provisioning Feature Control Options for the IVR Interactions
On-Net Routing and Local Number Portability for Inter-PacketCable Cable Management Server Routing
Provisioning an LNP Query on a Carrier Call
Provisioning Carrier Bypass (On-Net Route)—No LNP Queries
Provisioning Carrier Bypass (On-Net Route)—LNP Queries
Provisioning Carrier Bypass (On-Net Route)—Multi-Cisco BTS 10200 Softswitches
Provisioning Inter-CMS with NRS—Same Cisco BTS 10200 Softswitch Acting as CMS and MGC
Selectively Provisioning LNP Queries (Allow or Disallow) for a Particular Call Type
Alternate Activation and Deactivation Method
Provisioning Notes and Caveats
Outgoing Call Barring—Activation, Deactivation, and Interrogation
Alternate Activation and Deactivation Method
Outgoing Simulated Facility Group
Own Calling Number Announcement
Remote Activation of Call Forwarding and PIN_Change
Screen List Editing: SCF, SCR, SCA, and DRCW
Non-IVR Activation and Deactivation of SCA, SCF, SCR, and DRCW
Alternate Activation and Deactivation Method
Seasonal Suspend Provisioning for MR1 and Earlier
Provisioning Options for Inbound Call Treatment
Provisioning Options for Outbound Call Treatment
Turning Off (Deactivating) Seasonal Suspend
Troubleshooting, MR1 and Earlier
Seasonal Suspend Provisioning for MR1.1 and Later
Provisioning Options for Inbound Call Treatment
Provisioning Options for Outbound Call Treatment
Turning Off (Deactivating) Seasonal Suspend
Troubleshooting, MR1.1 and Later
Speed Call (1-Digit and 2-Digit) and Activation
Terminal and Group Make Busy Services
Usage Sensitive Three-Way Calling
Voice Mail, Voice Mail Always, and Voice Mail Access
Office Provisioning Voice Mail Activation (VM_ACT), Deactivation (VM_DEACT), and Access (VM_ACCESS)
Office Provisioning Voice Mail Always
Alternate Way of Activating and Deactivating VM and VMA
Provision an Office Service ID for a POP
Feature Provisioning
Revised: May 31, 2010, OL-12777-12This chapter describes the CLI provisioning commands necessary for offering supplementary features to a subscriber line and is limited to the Feature Server components of the Cisco BTS 10200 Softswitch. All the necessary steps required to provision the supplementary features offered by the Feature Servers are described in the recommended order; however, only the essential tokens are included in the examples.
The following sections outline the structure of this chapter, the conventions used, and the assumptions that are made. The provisioning procedures are grouped as follows:
•
Feature Provisioning—Provisioning procedures to set up a feature server on the network.
•
•
•
•
•
Note
Tip
The individual procedures for provisioning each supplementary feature are structured as follows:
•
This is a one-time procedure performed during initial softswitch configuration and, under normal circumstances, it is not required at any other point during system operation.
•
Network resources include the Call Agent, Feature Servers, media gateways, trunks, and terminations. Resource provisioning, under normal circumstances, is done one time during the initial softswitch configuration and is not required at other points during system operation.
•
•
If any of these elements do not apply in any individual procedure, they are eliminated. Each provisioning task is presented in a procedural format, with a sequence of provisioning steps.
Conventions
This section outlines additional conventions used only within this chapter. Refer to the Preface for all other conventions.
1.
•
•
•
2.
Assumptions
The following specific assumptions are made in this chapter:
•
•
•
•
–
–
•
Vertical Service Codes
Some features can be accessed and controlled by the subscriber using a handset and vertical service codes (VSCs). VSCs are provisionable by the service provider (any valid unique ASCII string up to five characters long), and the customary values are country specific.
For convenience, some VSC values are preprovisioned in the Cisco BTS 10200 Softswitch. The valid formats for VSC ASCII strings are listed in the VSC table specification in the Cisco BTS 10200 Softswitch Command Line Interface Reference Guide. The preprovisioned VSC values are listed in the Vertical Service Code appendix of the same document.
Note
Vertical Service Code Provisioning
This section supplements the feature provisioning sections for features that can be invoked with a VSC.
VSC provisioning is dependent on the type of dial plan in effect, NANP or otherwise. Currently, there are two standard configurations based on the nature of dial plan associated with a subscriber. They are identified by the NANP-DIAL-PLAN token in the dial-plan-profile table and are discussed in the following sections:
•
•
Note
Consider the following example, for which the subscriber is expected to dial a VSC followed by a DN. A SIP subscriber is provisioned with *93 for Feature1 and *938 for Feature2, and dials *938+2135551801 to invoke Feature2. The BTS 10200 receives *9382135551801 in the INVITE message. By default, it takes the first six characters, in this case *93821, and uses this string to look up the feature in the VSC table. There is no match for *93821, therefore the BTS 10200 proceeds as follows. First, it uses *9 to look for a match in the VSC table and it cannot be found. Then it uses *93, finds a match, and delivers Feature1. This is incorrect. The user's intention was to invoke Feature2 and not Feature1. The solution is for the service provider to change one of the two VSCs (either *93 or *938) in the VSC table.
NANP Dial Plan VSC Provisioning
Step 1
add/change digit-map; id=digit-map-1; DIGIT_PATTERN=[regular digit pattern]|*xx|11xx|[regular digit pattern];
Note
Step 2
add/change digit-map; id=digit-map-ctx; DIGIT_PATTERN=[regular Centrex digit pattern]|*xx|11xx|[regular Centrex digit pattern];
Note
Step 3
add/change sub-profile id=plano1; digit-map-id=digit-map=1;add/change sub-profile id=plano1; digit-map-id=digit-map-ctx;Step 4
add/change dial-plan-profile ID=dpp1; DESCRIPTION=dialing plan profile ID2; NANP_DIAL_PLAN=Y;Step 5
add/change vsc digit-string=*72;fname=CFUA;add/change cdp digit-string=*72; fname=CFUA; cdp-id=cdp1; cat-string=11111111111; nod=VSC;
Non-NANP Dial Plan VSC Provisioning for Subscriber and Centrex
Step 1
add/change digit-map id=digit-map-1; DIGIT_PATTERN=[regular digit pattern]|[*,#]xx{*,#]|[regular digit pattern];
Note
Note
*XX*
*XX#
#XX#
*#XX*
*#XX#Step 2
add/change digit-map id=digit-map-ctx; DIGIT_PATTERN=[regular Centrex digit pattern]|[*,#]xx[*,#]|*#xx[*,#]|[regular Centrex digit pattern];
Note
Step 3
add/change sub-profile id=plano1; digit-map-id=digit-map-1;add/change sub-profile id=plano1; digit-map-id=digit-map-ctx;Step 4
add/change digman id=pretrans; RULE=1; MATCH_STRING=^*; REPLACE_STRING=&;MATCH_NOA=ANY; REPLACE_NOA=VSC;add/change digman ID=pretrans; RULE=2; MATCH_STRING=^#; REPLACE_STRING=&; MATCH_NOA=ANY; REPLACE_NOA=VSC;Step 5
add/change dial-plan-profile ID=dpp1; DESCRIPTION=dialing plan profile ID2; NANP_DIAL_PLAN=N; DNIS_DIGMAN_ID=pretrans;Step 6
add/change vsc digit-string=*57*; fname=CFUA;add/change cdp digit-string=*57*; fname=CFUA; cdp-id=cdp1; cat-string=11111111111; nod=VSC;
Configurable Default Values for Subscriber Provisioning
The Configurable Default Values for Subscriber Provisioning feature provides the following capabilities:
•
•
•
•
This feature is automatically enabled after Cisco BTS 10200 Softswitch installation. After upgrading, the existing configured default values are preserved.
Note
Provisioning the Default Value for an Optional Token
The following example provisions the default value for the es_supp token in the AGGR table.
Step 1
show var_default noun=aggr; var_name=es_supp;Reply:Success: Database is void of entriesStep 2
add var_default noun=aggr; var_name=es_supp; def_vals=Y;Step 3
show var_default noun=aggr; var_name=es_supp;NOUN=aggrVAR_NAME=es_suppDEF_VALS=YReply:Success:Entry 1 of 1 returned.
Checking the Integrity of the Configured Default Value
The Configurable Default Values for Subscriber Provisioning feature checks the integrity of the configured default value to ensure the default value is consistent with the token value specified in the database. An invalid default value will be rejected when you add or change the default value.
The following example illustrates an attempt to configure the default value of a token with an invalid value.
change var_default noun=aggr; var_name=es_supp; def_vals=BAD_VALUE;Reply:Failure:<BAD_VALUE> is invalid - should be one of [Y,N]
Note
Provisioning a Default Value using a Command Alias
The Configurable Default Values for Subscriber Provisioning feature enables a command alias to be used for adding, changing, and viewing a token default value. The following example illustrates using the command alias sub when configuring the default value of the term_type token in the Subscriber table.
Step 1
add var_default noun=sub; var_name=term_type; def_vals=SIP;Reply:Success:CLI add succesfullyStep 2
show var_default noun=sub; var_name=term_type;NOUN=subscriberVAR_NAME=term_typeDEF_VALS=SIPReply:Success:Entry 1 of 1 returned.
Viewing the Factory Default Value
This feature adds the all token to the show var_default command to provide the ability to show if a token has a factory default value configured and also the currently configured default value. The following example illustrates displaying both the factory default value and the currently configured value for the term_type token in the subscriber table.
show var_default noun=subscriber; var_name=term_type; all=y;NOUN=subscriberVAR_NAME=term_typeBTS_DEFAULT=TERMDEF_VALS=TGReply:Success:Entry 1 of 1 returned.Restoring a Factory Default Value
BTS 10200 factory default values can be replaced by user provisioned defaults. You can restore the factory default value by deleting the provisioned default value. The following example restores the factory default value for the term_type token in the Subscriber table.
delete var_default noun=subscriber; var_name=term_type;Reply:Success:CLI delete successfully.Feature Provisioning
This section describes how to provision the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note
change feature fname=OCB; type1=pin-len; value1=5; type2=to; value2=2-; type3=fail-cnt; value3=4; type4=lock-out; value4=60;
Note
http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/bts4_2/sipdocs/sipadmin/9usrappa.htm
Note
--- For call-waiting features, the system supports CWD, but not CW or CIDCW
--- For three-way-calling features, the system supports TWCD, but not TWC or USTWC
8XX (Toll-Free Calling)
This section explains how to provision outbound toll-free calling for subscribers on the Cisco BTS 10200 Softswitch. Toll-free calling in North America usually involves an 8XX number.
Tip
Office Provisioning
This section explains how to create the 8XX feature and apply it to a dial plan. It also shows how to provision the translation of an 8XX number to a local DN.
Step 1
add feature fname=8XX; tdp1=COLLECTED_INFORMATION; tid1=SPECIFIC_DIGIT_STRING; ttype1=R; description=toll-free; feature_server_id=FSAIN205;Step 2
add destination dest-id=dest800; call-type=TOLL_FREE; route-type=SUB;Step 3
add dial-plan-profile ID=dp1;Step 4
Caution
Tip
add dial-plan ID=dp1; digit-string=800; dest-id=dest800;Step 5
add dn2cust-grp digit-string=8005550001; translated-dn=4695558724;
Add 8XX to the Office Service IDs
This section explains how to add the 8XX feature to the default-office-service-id (a switch-wide default service) and to the office-service-id (a POP-wide default service). If you provision an office-service-id for a POP, that office-service-id takes precedence over the default-office-service-id. However, if you do not provision an office-service-id for a POP, the system uses the default-office-service-id.
Step 1
a.
show ca-config type=DEFAULT-OFFICE-SERVICE-ID;The system displays the value of the default-office-service-id. In this example, assume that the system displayed the value as ABC.
b.
show service id=ABC;The system displays the features that are in this service table.
c.
add/change service id=ABC; fname9=8XX;Step 2
a.
show pop id=pop1;The system displays the value of the office-service-id, if it already exists for this POP. In this example, assume that the system displayed the value as XYZ.
Note
b.
show service id=XYZ;The system displays the features that are in this service table.
c.
add/change service id=XYZ; fname9=8XX;Provisioning Resources
These steps explain how to provision the resources to enable an SCP query.
Step 1
add sg id=sg_1; description=signaling gateway 1;Step 2
add sg-grp id=sg_grp1; sg1-id=sg_1; description=signaling gateway group 1;Step 3
add sgp id=itp_7507_1; sg-id=sg_1; description=ITP 7507 for sg_1;Step 4
add sctp-assoc-profile id=sctp_prof; bundle_timeout=500; max_assoc_retrans=5; max_path_retrans=5; max_rto=6000; min_rto=301; sack_timeout=101; hb_timeout=1000;
Note
Step 5
add sctp-assoc id=sctp_assoc1; sgp-id=itp_7507_1; sctp-assoc-profile-id=sctp_prof; remote_port=14001; remote_tsap_addr1=10.89.232.9; remote_tsap_addr2=10.89.233.41; dscp=NONE; ip_tos_precedence=FLASH; local_rcvwin=64000; max_init_retrans=5; max_init_rto=1000; platform_id=FSAIN205;Step 6
add dpc id=stp1; point-code=1-101-0; description=STP1 MGTS STP;Step 7
add/change sccp-nw id=1; net-ind=NATIONAL; sub-svc=NATIONAL; hop-count=10;Step 8
add subsystem-grp id=SSN_TF; platform-id=FSAIN205; tcap-version=ANS92;Step 9
add subsystem id=SSN_TF; opc_id=opc; local-ssn=254; remote-ssn=254; sccp-nw-id=1; sccp-version=ANS92; application-version=AIN01; (if Toll-Free is an IN1 service, application-version=IN1);Step 10
add routing-key id=rk_tf; opc-id=opc; sg-grp-id=sg_grp; si=SCCP; rc=201; platform-id=FSAIN205; ssn-id=SSN_TF;Step 11
add sccp-route opc_id=opc; dpc_id=stp1; ssn_id=SSN_TF; rk_id=rk_tf;Step 12
add slhr-profile id=slhr_tf;Step 13
add slhr id=slhr_tf; opc_id=opc; dpc_id=stp1; rk_id=rk_tf; ssn_id=SSN_TF; gtt-req=Y; tt=254; gtt-addr-type=CDPN; gtt-addr=3;Step 14
add ca-config type=DEFAULT-TOLL-FREE-SLHR-ID; datatype=string; value=slhr_tf;Step 15
control sctp-assoc id=sctp_assoc1; mode=forced; target-state=INS;Step 16
control subsystem-grp id=SSN_TF; mode=forced; target-state=INS;
Provisioning Notes/Caveats
If the toll free trigger is generated by trunk (SS7, CAS) calls and no calling party is received in the setup indication (IAM), ensure that the JIP field or LRN field in the POP table associated with the trunk group is set to the appropriate value. If not, the SCP query will fail.
911 Emergency
Emergency service is a public safety feature providing emergency call routing to a designated Emergency Service Bureau (ESB), normally called the public safety answering point (PSAP) in the United States.
Tip
The following section identifies the steps necessary to offer 911 Emergency Service.
Office Provisioning
Step 1
add/change feature; fname=911; tdp1=COLLECTED_INFORMATION; tid1=911_TRIGGER; ttype1=R; description=Emergency Service; feature_server_id=FSPTC235;Step 2
change ca-config type=DEFAULT-OFFICE-SERVICE-ID; datatype=string; value=469;Step 3
change ca-config type=E911-CALLED-PARTY-HOLD; datatype=boolean; value=Y;Step 4
add destination dest-id=dest911; CALL_TYPE=EMG; ROUTE_TYPE=ROUTE; ROUTE_GUIDE_ID=opr911;zero-plus=y; CLDPTY_CTRL_REL_ALWD=Y;Step 5
add service id=469; FNAME1=911;
Provisioning Resources
Step 1
add mgw_profile id=cas_911; packet-type=ip; aal1=n; aal2=n; aal5=n; pvc=n; svc=n; spvc=n; ec_supp=n; sdp-origfield-supp=n; sdp-sessname-supp=n; sdp-email-supp=n; sdp-phone-supp=n; sdp-bandwidth-supp=n; sdp-info-supp=n; sdp-time-supp=n; sdp-attrib-supp=n; mgcp-erqnt-supp=n; mgcp-hairpin-supp=n; mgcp-qloop-supp=n; mgcp-3way-hshake-supp=n; mgcp-conn-id-at-gw-supp=n; termination-prefix=NULL; port-start=1; vendor=CISCO; rbk-on-conn-supp=y; mgcp_max1_retries=3; mgcp-t-tran=1000; MGCP_EP_SPECIFIC_CAP_SUPP=y;Step 2
add mgw id=224.14:2434; tsap-addr=10.89.233.74:2434; call-agent-id=CA146; mgw_profile_id=cas_911; call-agent-control-port=2427; type=tgw;Step 3
add cas_tg_profile id=cas_911; sig-type=MF-OSS; mf-oss-type=MO-10II; oss-sig=n; test_line=n; e911=y;Step 4
add trunk_grp id=911; tg_type=CAS; dial_plan_id=dpcas; sel-policy=LRU; direction=BOTH; GLARE=SLAVE; tg_profile_id=cas_911; call-agent-id=CA146; mgcp-pkg-type=MO;Step 5
add termination prefix=cas/911/; mgw-id=224.14:2434; type=TRUNK; port-start=1; port-end=24;Step 6
add trunk cic-start=1; cic-end=4; tgn-id=911; termination-prefix=cas/911/; mgw-id=224.14:2434; termination-port-start=1; termination-port-end=4;Step 7
add route id=ops911; tgn1-id=911;Step 8
add route-guide id=ops911; policy-type=route; policy-id=ops911;Step 9
add destination dest-id=ops911; call-type=EMG; route-type=ROUTE; route-guide-id=ops911; zero-plus=y; CLDPTY_CTRL_REL_ALWD=Y;Step 10
add dial-plan id=dpcas; digit-string=911; dest-id=ops911odr; min-digits=3; max-digits=3;
Media Gateway Setup
The Cisco BTS 10200 Softswitch is connected to a MGW supporting MGCP (MS, DT, and MO) through an IP network. Some examples of media gateways are Cisco MC3810 and Cisco C3660. Contact Cisco TAC for additional details on gateways supported for CAS trunk groups.
CAS Trunk Group Control Commands
After the CAS trunk group is provisioned in the BTS 10200 and the corresponding MGCP gateway is configured for CAS, the CAS trunk group and the CAS trunk circuits can be brought into service with control commands from the EMS.
At the EMS CLI> prompt, execute the following commands:
Step 1
CLI> control mgw 224.14:2434; target_state=ins; mode=forced;CLI> status mgw id=224.14:2434;After the above commands are executed, the status should show:
REPLY=CONFIGURATION COMMAND EXECUTED -> 224.14:2434ADMIN STATUS -> ADMIN_INSOPER STATUS -> MGW_STATUS_UPStep 2
CLI> control trunk_grp id=911; target_state=ins; mode=forced;CLI> status trunk_grp id=911;After the above commands are executed, the status should show:
REPLY=CONFIGURATION COMMAND EXECUTED CAS_TRUNK_GROUP -> 911ADMIN STATUS -> ADMIN_INSOPER STATUS -> TG_INSStep 3
CLI> control trunk-termination tgn-id=911; cic=all; mode=forced; target-state=ins;CLI> status trunk-termination tgn-id=4005; cic=all;After the commands are executed, the status should show:
CONFIGURATION COMMAND EXECUTED CAS_TRUNK_GROUP -> 911 -> CIC -> 1TERM ADMIN STATUS -> ADMIN_INSTERM OPER STATUS -> TERM_STATE_EQUIPCIC STATIC STATE -> ACTVCIC DYNAMIC STATE -> IDLECONFIGURATION COMMAND EXECUTED CAS_TRUNK_GROUP -> 911 -> CIC -> 2TERM ADMIN STATUS -> ADMIN_INSTERM OPER STATUS -> TERM_STATE_EQUIPCIC STATIC STATE -> ACTVCIC DYNAMIC STATE -> IDLE...CONFIGURATION COMMAND EXECUTED CAS_TRUNK_GROUP -> 911 -> CIC -> 24TERM ADMIN STATUS -> ADMIN_INSTERM OPER STATUS -> TERM_STATE_EQUIPCIC STATIC STATE -> ACTVCIC DYNAMIC STATE -> IDLEThis status should apply to all the corresponding circuits in the CAS trunk group (for example, 1 to 24).
At this point, the CAS trunk group circuits are ready to originate and receive calls.
Centrex Provisioning
The following two steps are mandatory for Centrex provisioning:
Step 1
Step 2
MLHG provisioning is similar to subscriber provisioning as described above.
Active Call Information Display
This feature allows the display of of the call information of a currently active call. With this feature, the operator enters the appropriate input, depending on whether it is a subscriber (POTS, H323 or SIP), a Multi-line Hunt Group (MLHG) terminal, a Centrex extension, SS7, an ISDN trunk, a SIP trunk, an H323 trunk, termination, or a media gateway. The input for each type, as well as how to arrive at the call information based on the input is explained in this document. The goal is to first arrive at the Call Segment Association (CSA) index from the input. From the CSA index, all call-related information is retrieved. In some instances, more than one CSA index may be associated with the given subscriber.
CLI Provisioning
The following CLI syntax is used to provision this feature:
QUERY CALL-TRACE [MODE=<VERBOSE | BRIEF>]DN=<dn>MLHG-ID=<mlhg-id> TERMINAL=<terminal>CTXG-ID=<ctxg-id> EXT=<ext>TGN-ID=<tgn-id> TRUNK-ID=<trunk-id>SIP-CALL-ID=<sip-call-id>H323-CALL-ID=<h323-call-id>TERM=<term>MGW=<mgw>CLI examples
In the following example, the VERBOSE option is not shown (which defaults to BRIEF):
QUERY CALL-TRACE DN=4692551234 (for POTS/H323/SIP subscriber)QUERY CALL_TRACE MHLG-ID=mlhg1 TERMINAL=23 (for POTS MLHG terminal)QUERY CALL-TRACE CTXG-ID=ctxg1 EXT=1234 (for POTS centrex subscribers)QUERY CALL-TRACE TGN-ID=123 TRUNK-ID=456 (for SS7 and ISDN trunks)QUERY CALL-TRACE SIP-CALL-ID=<sip-call-id> (for SIP trunks)QUERY CALL-TRACE H323-CALL-ID=<h323-call-id> (for H323 trunks)QUERY CALL-TRACE TERM=aaln/2@x1-6-00-00-ca-30-88-79.CTlab.cisco.com (termination with FQDN)QUERY CALL-TRACE TERM=aaln/2@64.101.140.231 (termination with TSAP-ADDR)QUERY CALL-TRACE MGW=x1-6-00-00-ca-30-88-79.CTlab.cisco.com (mgw FQDN)QUERY CALL-TRACE MGW=64.101.140.231 (mgw TSAP-ADDRESS)Alerting Notification to Third Party Feature Server
The Cisco BTS 10200 Softswitch delivers alerting notification and call data to a third-party feature server (3PTYFS). The service provider can use appropriately designed and configured feature servers to make use of this notification and data to provide value-added services to subscribers; for example, delivery of caller ID on a subscriber television or computer screen.
For a complete description of this feature, refer to "Alerting Notification to Third Party Feature Servers" in the Network and Subscriber Feature Descriptions.
This document is intended for service provider technicians and engineers who are installing, provisioning, and deploying the Cisco BTS 10200 Softswitch and 3PTYFS in their network.
This section describes the steps required to provision support for Alerting Notification on Cisco BTS 10200 Softswitch. This includes provisioning the Cisco BTS 10200 Softswitch database with the TSAP address of the 3PTYFS, the feature trigger point, and the services with which the feature is offered.
Precedence for Provisioned Values
Alerting Notification can be assigned on a switch-wide, per-POP, or per-subscriber level (or all three levels). The system interprets the provisioned values this way:
•
•
•
The following are command examples to provision this feature.
Step 1
ADD FEATURE-SERVER ID=3PTYFS24; TSAP-ADDR=192.168.100.103:11024; TYPE=3PTY;EXTERNAL-FEATURE-SERVER=Y;ADD FEATURE-SERVER ID=3PTYFS23; TSAP-ADDR=SPECIALFS.cisco.com; TYPE=3PTY;EXTERNAL-FEATURE-SERVER=Y;ADD FEATURE-SERVER ID=3PTYFS22; TSAP-ADDR=INTERNALFS.cisco.com; TYPE=3PTY;EXTERNAL-FEATURE-SERVER=N;Note
•
•
•
Step 2
ADD FEATURE FNAME=ALERT_NOTIFY; TDP1=CALL_ACCEPTED; TID1=CALL_ACCEPTED_NOTIFY; TTYPE1=N; FEATURE-SERVER-ID=3PTYFS24;
Note
Step 3
SHOW CA-CONFIG TYPE=DEFAULT-OFFICE-SERVICE-ID;SHOW SERVICE ID=999;CHANGE SERVICE ID=999; FNAME8=ALERT_NOTIFY;Step 4
SHOW POP ID=CITY007;SHOW SERVICE ID=NOTIFY;ADD/CHANGE SERVICE ID=NOTIFY; FNAME1-ALERT_NOTIFY;Step 5
ADD/CHANGE SERVICE ID=silverservice; FNAME1=CFU; FNAME2=CFB; FNAME3=CFNA; FNAME4=CW; FNAME5=ALERT_NOTIFY;ADD SUBSCRIBER-SERVICE-PROFILE SUB-ID=Subscriber77; SERVICE-ID=silverservice;
Anonymous Call Rejection and A/D
The Anonymous Call Rejection (ACR) activation (ACR_ACT) and deactivation (ACR_DEACT) feature allows users to reject calls from parties that have set their privacy feature to prevent calling number delivery. When ACR is active, the called party receives no alert for incoming calls that are rejected. The incoming call is rerouted to a denial announcement indicating that private numbers are not accepted by the called party.
ACR has the following activation options:
•
•
The user lifts the handset and listens for a dial tone. The user presses *77. If ACR can be activated, the system returns a confirmation announcement. ACR is now activated and stays active until it is deactivated by *87.
To complete a call to the party with ACR, the calling party must enter the vertical service code (*82) to activate calling identity delivery and then place a call to the party with ACR. Incoming calls to the called party with ACR are checked even if the called party is offhook.
Tip
The following subsections identify the steps necessary to offer the ACR and A/D features.
Office Provisioning
Step 1
add feature FNAME=ACR_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=ACR Activation; GRP_FEATURE=N;Step 2
add feature FNAME=ACR_DEACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=ACR Deactivation; GRP_FEATURE=N;Step 3
add feature FNAME=ACR; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Anonymous Call Rejection; GRP_FEATURE=N;Step 4
add vsc DIGIT_STRING=*77; FNAME=ACR_ACTadd vsc; DIGIT_STRING=*87; FNAME=ACR_DEACT;
Subscriber Provisioning
Step 1
add service id=1; fname1=ACR; fname2=ACR_ACT; fname3=ACR_DEACT;Step 2
add subscriber-service-profile; sub-id=sub1; service-id=1;
Centrex Provisioning
Step 1
add cdp; id=cdp1; DIGIT_STRING=*77; NOD=VSC; FNAME=ACR_ACT; CAT_STRING=1111111111111111;add cdp; id=cdp1; DIGIT_STRING=*87; NOD=VSC; FNAME=ACR_DEACT; CAT_STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning, which is described above.
Alternate Activation and Deactivation Method
ACR can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate ACR:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=ACR;Use a CLI command similar to the following to deactivate ACR:
add subscriber-feature-data sub-id=sub_1; active=N; fname=ACR;Automatic Callback
Automatic Callback (AC) allows you to perform an activation procedure to set up a call to the last party you called without having to redial the telephone number. If the called party is busy, you can hang up and activate AC; the call is automatically connected when the called party becomes idle.
Tip
The following sections identify necessary steps for the automatic callback feature.
Office Provisioning
Step 1
add feature fname=AC_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=AC activation; feature_server_id=FSPTC235;Step 2
add feature fname=AC_DEACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=AC deactivation; feature_server_id=FSPTC235;Step 3
add feature fname=AC; fname1=AC_ACT; fname2=AC_DEACT; feature_server_id=FSPTC235;Step 4
add vsc; DIGIT_STRING=*66; FNAME=AC_ACT;add vsc; DIGIT_STRING=*86; FNAME=AC_DEACT;Step 5
add service id=1; fname1=AC;Step 6
change call-agent ID=CA416; STATUS=FORCED_STANDBY_ACTIVE; TSAP_ADDR_SIDEA=sim-SYS02CA.ipclab.cisco.com:9416; MGW_MONITORING_ENABLED=Y; CLLI=HERNVADTDS1;Step 7
change office-code DIGIT_STRING=703432; OFFICE_CODE_INDEX=14; DID=N; CALL_AGENT_ID=CA416; DIALABLE=Y; NDC=703; EC=432; DN_GROUP=xxxx;Step 8
show ca-config TYPE=AC-ACTIVATION-LEVEL; DATATYPE=STRING; DEFAULT_VALUE=ONE;show ca-config TYPE=ACAR-SLHR-ID; DATATYPE=STRING;The ca-config values for the AR feature are common to the AC feature. Refer to the ca-config values for the AR feature.
Step 9
change ca-config default-office-service-id=999;Step 10
change service id=999; fname1=AC_ACT;
Provisioning Resources
Step 1
add/change sg id=sg_1; description=signaling gateway 1;Step 2
add/change sg-grp id=sg_grp1; sg1-id=sg_1; description=signaling gateway group 1;Step 3
add/change sgp id=itp_7507_1; sg-id=sg_1; description=ITP 7507 for sg_1;Step 4
add sctp-assoc-profile id=sctp_prof; bundle_timeout=500; max_assoc_retrans=5; max_path_retrans=5; max_rto=6000; min_rto=301; sack_timeout=101; hb_timeout=1000;
Note
Step 5
add sctp-assoc id=sctp_assoc1; sgp-id=itp_7507_1; sctp-assoc-profile-id=sctp_prof; remote_port=14001; remote_tsap_addr1=10.89.232.9; remote_tsap_addr2=10.89.233.41; dscp=NONE; ip_tos_precedence=FLASH; local_rcvwin=64000; max_init_retrans=5; max_init_rto=1000; platform_id=FSPTC235;Step 6
add dpc id=itp1; point-code=7-101-0; description=STP1, MGTS STP;Step 7
add/change sccp-nw id=1; net-ind=NATIONAL; SUB_SVC=NATIONAL; HOP-Count=10;Step 8
add subsystem-profile id=SSN_ACAR; PLATFORM_ID=FSPTC235;Step 9
add subsystem id=SSN_ACAR; opc_id=opc; local-ssn=251; remote-ssn=251; sccp-nw-id=1; SCCP_VERSION=ANS92; TCAP_VERSION=ANS92; APPLICATION_VERSION=IN1;Step 10
add routing-key id=rk_acar; opc-id=opc; sg-grp-id=sg_grp; si=SCCP; rc=205; PLATFORM_ID=FSPTC235; ssn-id=SSN_ACAR;Step 11
add sccp-route opc_id=opc; dpc_id=itp1; ssn_id=SSN_ACAR; rk_id=rk_acar;Step 12
add slhr-profile id=slhr_acar;Step 13
add slhr id=slhr_acar; opc_id=opc; dpc_id=itp1; ssn_id=SSN_ACAR; gtt-req=Y; tt=251; GTT_ADDR_TYPE=CDPN; GTT_ADDR=3;Step 14
Add ca-config type=ACAR-SLHR-ID; datatype=string; value=slhr_acar;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;Step 2
change subscriber-feature-data sub-id=subscriber_1; fname=AC_ACT; type1=DENIED; value1=Y;Step 3
change subscriber id=subscriber_1; USAGE-SENS=Y;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step should be completed.
Step 1
add cdp id=cdp1; DIGIT_STRING=*66; NOD=VSC; FNAME=AC_ACT; CAT_STRING=1111111111111111;add cdp id=cdp1; DIGIT_STRING=*86; NOD=VSC; FNAME=AC_DEACT; CAT_STRING=1111111111111111;
Provisioning Notes/Caveats
•
•
•
Automatic Recall
Automatic Recall (AR) is an incoming call management feature that allows you to perform an activation procedure to automatically set up a call to the last incoming number.
Tip
The following subsections identify the steps necessary for provisioning the automatic recall (AR) feature.
Office Provisioning
Step 1
add feature fname=AR_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=AR activation; feature_server_id=FSPTC235;Step 2
add feature fname=AR_DEACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=AR deactivation; feature_server_id=FSPTC235;Step 3
add vsc DIGIT_STRING=*69; FNAME=AR_ACTadd vsc DIGIT_STRING=*89; FNAME=AR_DEACTStep 4
add service id=1; fname1=AR_ACT; fname2=AR_DEACT;Step 5
show ca-config type=AR%Reply : Success: Entries 1-24 of 24 returned.TYPE=AR-ACTIVATION-LEVELDATATYPE=STRINGVALUE=ONETYPE=ARAC-ACTIVATION-TO-COINDATATYPE=BOOLEANVALUE=NTYPE=ARAC-ACTIVATION-TO-ANONYMOUS-DNDATATYPE=BOOLEANVALUE=NTYPE=ARAC-ACTIVATION-TO-MLHGDATATYPE=BOOLEANVALUE=YTYPE=ARAC-ACTIVATION-TO-NON-UNIQUE-DNDATATYPE=BOOLEANVALUE=NTYPE=ARAC-INITIAL-QUERY-RESPONSE-TIMER-T5DATATYPE=INTEGERVALUE=3TYPE=ARAC-INTER-BUSY-IDLE-QUERY-DURATION-TIMER-T11DATATYPE=INTEGERVALUE=95TYPE=ARAC-MAX-6SEC-RINGING-CYCLESDATATYPE=INTEGERFROM_VALUE=2TO_VALUE=5VALUE=4TYPE=ARAC-MAX-CONCURRENT-ATTEMPTSDATATYPE=INTEGERVALUE=30TYPE=ARAC-MAX-QUEUE-SIZEDATATYPE=INTEGERFROM_VALUE=10TO_VALUE=20VALUE=15TYPE=ARAC-MAX-UNANSWERED-RING-APPLICATIONSDATATYPE=INTEGERFROM_VALUE=1TO_VALUE=12VALUE=2TYPE=ARAC-MONITORING-TIMER-T6DATATYPE=INTEGERVALUE=30TYPE=ARAC-ORIGINATING-SCAN-RATEDATATYPE=INTEGERVALUE=60TYPE=ARAC-OSPCS-OVERALL-MONITOR-TIMER-T10DATATYPE=INTEGERVALUE=3TYPE=ARAC-OUTSTANDING-NOTIFICATION-TIMER-T8DATATYPE=INTEGERVALUE=35TYPE=ARAC-PERIODIC-SCAN-RATEDATATYPE=INTEGERFROM_VALUE=5TO_VALUE=30VALUE=30TYPE=ARAC-QUEUING-SUPPORTEDDATATYPE=BOOLEANVALUE=YTYPE=ARAC-RESUME-SCANNING-THRESHOLD-TIMEDATATYPE=INTEGERVALUE=5TYPE=ARAC-RESUME-SCANNING-TIMER-T2DATATYPE=INTEGERVALUE=5TYPE=ARAC-SUB-QUERY-RESPONSE-TIMER-T9DATATYPE=INTEGERVALUE=3TYPE=ARAC-TERMINATING-SCANNING-MONITOR-TIMER-T7DATATYPE=INTEGERVALUE=30TYPE=ARAC-TERMINATING-SPCS-SCAN-ALLOWDATATYPE=BOOLEANVALUE=YTYPE=ARAC-TSPCS-OVERALL-MONITOR-TIMER-T10DATATYPE=INTEGERVALUE=3CA-Config values for the AC feature are common to the AR feature. Refer to the CA-Config values for the AC feature.
Step 6
change ca-config type=default-office-service-id; value=999;change service id=999; fname1=AR_ACT;Provisioning Resource s
Step 1
add sg id=sg_1; description=signaling gateway 1;Step 2
add sg-grp id=sg_grp1; sg1-id=sg_1; description=signaling gateway group 1;Step 3
add sgp id=itp_7507_1; sg-id=sg_1; description=ITP 7507 for sg_1;Step 4
add sctp-assoc-profile id=sctp_prof; bundle_timeout=500; max_assoc_retrans=5; max_path_retrans=5; max_rto=6000; min_rto=301; sack_timeout=101; hb_timeout=1000;
Note
Step 5
add sctp-assoc id=sctp_assoc1; sgp-id=itp_7507_1; sctp-assoc-profile-id=sctp_prof; remote_port=14001; remote_tsap_addr1=10.89.232.9; remote_tsap_addr2=10.89.233.41; dscp=NONE; ip_tos_precedence=FLASH; local_rcvwin=64000; max_init_retrans=5; max_init_rto=1000; platform_id=FSPTC235;Step 6
add dpc id=itp1; point-code=7-101-0; description=STP1, MGTS STP;Step 7
add sccp-nw id=1; net-ind=NATIONAL; SUB_SVC=NATIONAL; HOP-Count=10;Step 8
add subsystem-profile id=SSN_ACAR; PLATFORM_ID=FSPTC235;Step 9
add subsystem id=SSN_ACAR; opc_id=opc; local-ssn=251; remote-ssn=251 sccp-nw-id=1; SCCP_VERSION=ANS92; TCAP_VERSION=ANS92; APPLICATION_VERSION=IN1;Step 10
add routing-key id=rk_acar; opc-id=opc; sg-grp-id=sg_grp; si=SCCP; rc=205; PLATFORM_ID=FSPTC235; ssn-id=SSN_ACAR;Step 11
add sccp-route opc_id=opc; dpc_id=itp1; ssn_id=SSN_ACAR; rk_id=rk_acar;Step 12
add slhr-profile id=slhr_acar;Step 13
add slhr id=slhr_acar; opc_id=opc; dpc_id=itp1; rk_id=rk_acar; ssn_id=SSN_ACAR; gtt-req=Y; tt=251; GTT_ADDR_TYPE=CDPN; GTT_ADDR=3;Step 14
add ca-config type=ACAR-SLHR-ID; datatype=string; value=slhr_acar;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;Step 2
change subscriber-feature-data sub-id=subscriber_1; fname=AR_ACT; type1=DENIED; value1=Y;Step 3
change subscriber id=subscriber_1; USAGE-SENS=Y;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step must be completed.
Step 1
add cdp; id=cdp1; DIGIT_STRING=*69; NOD=VSC; FNAME=AC_ACT; CAT_STRING=1111111111111111;add cdp; id=cdp1; DIGIT_STRING=*89; NOD=VSC; FNAME=AC_DEACT; CAT_STRING=1111111111111111;
Provisioning Notes/Caveats
•
•
•
Two-Level AR Activation
AR activation is also offered as a two-level procedure. When a subscriber dials the activation code, an announcement gives the last incoming calling party number, the date and time when the call was received, and instructions to dial 1 to activate the AR call to that party.
Provisioning two-level AR activation requires the following additional steps:
Step 1
add ca-config type=AR-ACTIVATION-LEVEL; datatype=string; value=TWO;To apply at the POP basis:
add pop id=pop1; ar-activation-level=TWO;Step 2
add ca-config type=DEFAULT-IVR-ROUTE-GUIDE-ID; datatype=string; value=def_ivr_rg;Step 3
add ivr-script-profile fname=AR_ACT; ivr-access-mode=IVR; ivr-route-guide-id=ar_ivr_rg; ivr-script-pkg-type=BAU;Step 4
add language id=def;Step 5
add audio-seq id=ar_vbk_dn_seq; language-id=def; seq=ar_voice_back_dn,ar_var_dn,ar_voice_back_date,ar_var_date,ar_voice_back_time,ar_var_ti me,ar_activation_prompt; description=The last incoming number was [ dn ]. This call was received on [ date ] at [ time ]. To activate Automatic Recall, dial 1 otherwise, hang up.add audio-seq id=ar_vbk_anon_seq; language-id=def; seq=ar_voice_back_dn,ar_voice_back_anonymous_dn,ar_voice_back_date,ar_var_date,ar_voice_ba ck_time,ar_var_time,ar_activation_prompt; description=The last incoming number was an anonymous number and cannot be announced. This call was received on [ date ] at [ time ]. To activate Automatic Recall, dial 1 otherwise, hang up.add audio-seq id=ar_act_seq; language-id=def; seq=ar_activation_prompt; description=To activate Automatic Recall, dial 1 otherwise, hang up.add audio-seq id=ar_inv_digit_seq; language-id=def; seq=ar_dialing_error,ar_activation_prompt; description=We are sorry. The digits dialed are not a valid command. To activate Automatic Recall, dial 1 otherwise, hang up.add audio-seq id=ar_con_instr_seq; language-id=def; seq=ar_consult_instruction; description=We are sorry. The digits dialed are not a valid command. To activate Automatic Recall, dial 1 otherwise, hang up.Step 6
add audio-segment id=ar_voice_back_dn; type=physical; url=file://ar_voice_back_dn.wav; description=The last incoming number wasadd audio-segment id=ar_voice_back_anonymous_dn; type=physical; url=file://ar_voice_back_anynomous_dn; description=an anonymous number and cannot be announcedadd audio-segment id=ar_var_dn; type=variable; var-type=dig; var-subtype=ndn;add audio-segment id=ar_voice_back_date; type=physical; url=file://ar_voice_back_date.wav; description=This call was received onadd audio-segment id=ar_var_date; type=variable; var-type=dat; var-subtype=mdy;add audio-segment id=ar_voice_back_time; type=physical; url=file://ar_voice_back_time.wav; description=atadd audio-segment id=ar_var_time; type=variable; var-type=tme; var-subtype=t12;add audio-segment id=ar_activation_prompt; type=physical; url=file://ar_activation_prompt.wav; description=To activate Automatic Recall, dial 1 otherwise, hang up.add audio-segment id=ar_dialing_error; type=physical; url=file://ar_dialing_error.wav; description=We are sorry. The digits dialed are not a valid command.add audio-segment id=ar_consult_instruction; type=physical; url=file://ar_consult_instruction.wav; description=We are sorry. Please hang up now, consult your written instructions, and try again later.
Busy Line Verification
The Busy Line Verification (BLV) service allows you to obtain operator assistance to determine if a called line is in use.
Busy Line Interrupt (BLI) service allows the operator to interupt the called party line and relay a message. If the interrupted party hangs up, you can originate a new call unless the called party has prohibited BLI in advance. At your request, the operator also has the option to connect you directly to the called party.
Tip
The following subsections identify necessary steps for the BLV feature.
Office Provisioning
Step 1
change ca-config default-office-service-id=999;Step 2
change service id=999; fname1=BLV;Step 3
add feature fname=blv; tdp1=TERMINATION_ATTEMPT; tid1=BLV; ttype1=R; feature_server_id=fsptc235; description=Busy-line verification; grp_feature=N;
Provisioning Resources
Step 1
add cas-tg-profile id=cas_blv; no-test-trunk=y;Step 2
add termination id=S0/DS1-1/1; mgw-id=c2421.1001; mgcp-package-type=MT;
Note
Step 3
add trunk-grp id=152; qos-id=pcm;
Note
Subscriber Provisioning
Step 1
add subscriber-profile id=plano-sub-prof; qos-id=pcm;Step 2
add subscriber-feature-data sub-id=plano_sub1; fname=BLV; type1=DENIED; value1=N;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
In general, the BLV feature does not support interaction with features that are invoked by the verified party (terminating subscriber) at the time of verification. If the verified party is engaged in a call and has features invoked, the operator receives a busy tone and cannot perform an interrupt on the call.
You can provision the BLV feature to allow verification if the subscriber has Cancel Call Waiting (CCW) or 911 emergency service invoked at the time of verification. The following optional commands provision the BLV feature to allow or disallow verification when the subscriber has invoked CCW or 911 emergency service.
•
•
•
•
•
•
Call Block—Reject Caller
The call block (reject caller) feature allows the user to block incoming calls from the DN of the last received call. For the call block feature to work, the user must be subscribed to the selective call rejection (SCR) feature. Once call block is activated against a specified DN, that DN remains in the SCR list of the subscriber. A subscriber who wants to block callers (like sales calls) but does not know the caller's DN, can use this feature. Call block can be provided to POTS, Centrex, and MLHG subscribers.
Tip
The following subsections identify necessary steps for the feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CBLK; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Block - Reject Caller; GRP_FEATURE=N;Step 2
add vsc; DIGIT_STRING=*97; FNAME=CBLK;
Subscriber Provisioning
Step 1
add service id=1; fname1=CBLK;Step 2
add/change subscriber-service-profile; sub-id=sub1; service-id=1;
Centrex Provisioning
Step 1
add/change cdp; id=cdp1; DIGIT_STRING=*97; NOD=VSC; FNAME=CBLK; CAT_STRING=1111111111111111;
MLHG Provisioning
MLHG provisioning is similar to Subscriber provisioning.
Provisioning Notes/Caveats
This feature works in conjunction with the SCR feature. Therefore, for the call to be rejected by Call Block, SCR should be assigned to the subscriber and activated. Refer to Screen List Editing: SCF, SCR, SCA, and DRCW, for directions for provisioning SCR.
Block All Inbound Calls
If a subscriber has blocked all the inbound calls, the calling party hears an announcement stating that called party has chosen to deny all inbound calls. For the inbound DN, the DN2SUBSCRIBER entry is provisioned to route the call to ANNC=998, which plays an announcement stating the called party has chosen to deny inbound calls.Use the announcement ID 800 through 899 for custom announcements.
The following steps explain how to provision this feature:
Step 1
add subscriber id=sub_1; sub-profile-id=subprof_1; BILLING_DN=4692550260;Step 2
add dn2subscriber FDN=4692550260; status=ANNC; ANNC_ID=998;
Call Forward Busy
The Call Forwarding Busy service allows you to forward incoming calls to another telephone number when you are already on a call.
The following subsections identify necessary steps for the feature to be offered.
Tip
Office Provisioning—Call Forwarding for Unreachable Condition
The CFB feature can forward a call when the called-party line is unreachable or the MGW is down. This is the normal behavior when the keepalive-method token in the mgw-profile table is set to AUEP (this is the default value). If you chose to set the keepalive-method token to NONE, and you want CFB to forward a call when the called-party line is unreachable or down, you must provision an additional trigger for the CFB feature, and you must also refresh the service that contains the CFB feature. Two cases are shown in this section:
•
Caution
Fresh Installation
Step 1
add feature FNAME=CFBVA; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFB V Activation; GRP_FEATURE=N;Step 2
add feature FNAME=CFBVD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC32; DESCRIPTION=CFB V Deactivation; GRP_FEATURE=N;Step 3
add feature FNAME=CFBI; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFB Interrogation; GRP_FEATURE=N;Step 4
add feature fname=CFB; TDP1=T_BUSY; TID1=T_BUSY; TTYPE1=R; TDP2=T_EXCEPTION; TID2=T_NOT_REACHABLE; TTYPE2=R; FNAME1=CFBVA; FNAME2=CFBVD; FNAME3=CFBI; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Forwarding Busy; GRP_FEATURE=N;Step 5
add/change vsc fname=CFBVA; digit-string=*40;Step 6
add vsc fname=CFBVD; digit-string=#40#;Step 7
add vsc fname=CFBI; digit-string=*#40;Step 8
add service id=1; FNAME1=CFB; FNAME2=CFBVA; FNAME3=CFBVD; FNAME4=CFBI;Step 9
change feature fname=CFB; TYPE1=MCF; VALUE1=Y;Step 10
change feature fname=CFB; TYPE1=INTL; VALUE1=Y;change feature fname=CFBVA; TYPE1=INTL; VALUE1=Y;Step 11
change feature fname=CFBVA/CFBI; TYPE2=SDT; VALUE2=STUTTER-DIAL-TONE;Step 12
change feature fname=CFBVA; TYPE3=CC; VALUE3=ANS;Step 13
change feature fname=CFBVA/CFBVD/CFBI; TYPE4=FDT; VALUE4=DIAL-TONE;Step 14
add nod-restrict-list fname=CFB; nod=EMG;add nod-restrict-list fname=CFB; nod=FIRE;
Note
Caution
Step 15
add mgw-profile id=MTA_00777 keepalive-method=NONE;Step 16
add mgw id=mta12345; call-agent-id=CA146; mgw-profile-id=MTA_00777; tsap-addr=mta12345.cisco.com:1819; type=rgw;
Note
Upgrade or Changes to Database
Step 1
change feature TDP1=T_BUSY; TID1=T_BUSY; TTYPE1=R; TDP2=T_EXCEPTION; TID2=T_NOT_REACHABLE; TTYPE2=R; FNAME1=CFBVA; FNAME2=CFBVD; FNAME3=CFBI; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Forwarding Busy; GRP_FEATURE=N;Step 2
change service id=1; FNAME1=CFB; FNAME2=CFBVA; FNAME3=CFBVD; FNAME4=CFBI;Step 3
change mgw-profile id=MTA_00777 keepalive-method=NONE;
Note
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following steps are required.
Step 1
add/change custom-dial-plan ID=cdp1; DIGIT-STRING=*40; NOD=VSC; FNAME=CFBVA; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=#40#; NOD=VSC; FNAME=CFBVD; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=*#40; NOD=VSC; FNAME=CFBI; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
•
•
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. CFB can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CFB:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CFB; type1=FDN1;value1=4692551001;
Note
Use a CLI command similar to the following to deactivate CFB:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CFB;Call Forwarding Combination
The Call Forwarding Combination (CFC) feature allows a subscriber to combine and use various Call Forwarding features when the subscriber is either busy or does not answer their phone.
Note
The following subsections identify necessary steps for the CFC feature to be offered.
Office Provisioning
Step 1
add/change feature FNAME=CFC_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 2
add/change feature FNAME=CFC_DEACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 3
add/change feature FNAME=CFC_DN_CHG_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 4
add/change feature FNAME=CFCI_NO_DN_VRFY; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 5
add/change feature FNAME=CFCI; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 6
add/change feature FNAME=CFC; TDP1=T_BUSY; TID1=T_BUSY; TTYPE1=R; TDP2=CALL_ACCEPTED; TID2=CALL_ACCEPTED; TTYPE2=R; FEATURE_SERVER_ID=FSPTC325;TYPE1=TO; VALUE1=30; TYPE2=MCF; VALUE2=Y;Step 7
add/change vsc; fname=CFC_ACT; DIGIT_STRING=*68;add/change vsc; fname=CFC_DEACT; DIGIT_STRING=*88;add/change vsc; fname=CFC_DN_CHG_ACT; DIGIT_STRING=*201;add/change vsc; fname=CFCI_NO_DN_VRFY; DIGIT_STRING=*202add/change vsc; fname=CFCI; DIGIT_STRING=*203Step 8
change feature; fname=CFC_ACT; TYPE1=FDT; VALUE1=STUTTER_DIAL_TONE;change feature; fname=CFC_DEACT; TYPE1=FDT; VALUE1=STUTTER_DIAL_TONE;change feature; fname=CFC_DN_CHG_ACT; TYPE1=FDT; VALUE1=DIAL_TONE; TYPE2=FDT;VALUE2=STUTTER_DIAL_TONE;Step 9
add/change service id=cfc_dn_chg; FNAME1=CFC_DN_CHG_ACT; FNAME2=CFC_DEACT; FNAME3=CFC; FNAME4=CFCI_NO_DN_VRFY; FNAME5=CFCI; add/change service id=cfc; FNAME1=CFC_ ACT; FNAME2=CFC_DEACT; FNAME3=CFC; FNAME4=CFCI_NO_DN_VRFY;
Provisioning Resources
None.
Subscriber Provisioning
Step 1
add/change sub-service-profile; sub-id=[sub]; service-id=cfc_dn_chg;add/change sub-service-profile; sub-id=[sub]; service-id=cfc;Step 2
add/change sub-feature-data; sub-id=sub1; fname=CFC; TYPE1=FDN1; VALUE1=<fdn>;
Centrex Provisioning
In addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber, In addition, the following steps are required:
Step 1
add/change cdp; fname=CFC_ACT; DIGIT_STRING=*68; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; fname=CFC_DEACT; DIGIT_STRING=*88; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; fname=CFC_DN_CHG_ACT; DIGIT_STRING=*201; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; fname=CFCI_NO_DN_VRFY; DIGIT_STRING=*202; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; fname=CFCI; DIGIT_STRING=*203; nod=VSC; CAT_STRING=1111111111111111;MLHG Provisioning
MLHG provisioning is similar to subscriber provisioning.
Provisioning Notes/Caveats
While provisioning CFC, TO in the feature table denotes the time-out that should
be used for reporting No-Answer. This TO can be changed to `N' seconds by
using the following CLI command -
change feature; fname=CFC; TYPE1=TO; VALUE1=N;
•
add/change sub-feature-data; sub-id=sub_1; ACTIVE=Y; FNAME=CFC; TYPE1=FDN1; VALUE1=DN
•
•
Alternate Way to Activate and Deactivate CFC
Step 1
add/change sub-feature-data; sub-id=sub1; fname=CFC; ACTIVE=Y; TYPE1=FDN1; VALUE1=<fdn>;Step 2
add/change sub-feature-data; sub-id=sub1; fname=CFC; ACTIVE=Y;Step 3
add/change sub-feature-data; sub-id=sub1; fname=CFC; ACTIVE=N;
Call Forward No Answer
The Call Forward No Answer (CFNA) feature permits you to instruct the network to forward calls when there is no answer of the subscriber phone. A typical forwarding address is voice mail. You can activate and deactivate this feature through the DTMF interface on the handset. Once the feature is activated, it remains active until you deactivates it. While activated, any incoming calls to the subscriber phone that are not answered in six rings are forwarded to the specified number.
Note
There is an interaction when a Centrex subscriber has all three of the following features assigned and active:
•
•
•
In this case, the system does not invoke forwarding for any incoming calls. For the subscriber to have the call waiting features (CW or CIDCW) and CFNA active simultaneously, do not assign the CHD feature to the subscriber.
Tip
The following subsections identify necessary steps for the CFNA feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CFNAVA; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFNA Activation; GRP_FEATURE=N;Step 2
add feature FNAME=CFNAVD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFNA Deactivation; GRP_FEATURE=N;Step 3
add feature FNAME=CFNAI; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFNA Interrogation; GRP_FEATURE=N;Step 4
add feature FNAME=CFNA; TDP1=CALL_ACCEPTED; TID1=CALL_ACCEPTED; TTYPE1=R; FNAME1=CFNAVA; FNAME2=CFNAVD; FNAME3=CFNAI; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Forwarding No Answer; GRP_FEATURE=N;Step 5
add/change vsc fname=CFNAVA; digit-string=*72;Step 6
add/change vsc fname=CFNAVD; digit-string=#72#;Step 7
add/change vsc fname=CFNAI; digit-string=*#72;Step 8
add service id=1; FNAME1=CFNA;Step 9
change feature fname=CFNA; TYPE1=TO; VALUE1=45;Step 10
change feature fname=CFNA; TYPE1=INTL; VALUE1=Y;change feature fname=CFNAVA; TYPE1=INTL; VALUE1=Y;Step 11
change feature fname=CFNAVA/CFNAI; TYPE2=SDT; VALUE2=STUTTER-DIAL-TONE;Step 12
change feature fname=CFNAVA/CFNAVD/CFNAI; TYPE4=FDT; VALUE4=DIAL-TONE;Step 13
change feature fname=CFNVA; TYPE1=MCF; VALUE1=Y;Step 14
change feature fname=CFNAVA; TYPE3=CC; VALUE3=N;Step 15
add nod-restrict-list fname=CFNA; nod=EMG;add nod-restrict-list fname=CFNA; nod=FIRE;
Note
Caution
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following steps are required.
Step 1
add/change custom-dial-plan ID=cdp1;DIGIT-STRING=*72; NOD=VSC;FNAME=CFNAVA; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1;DIGIT-STRING=*73; NOD=VSC;FNAME=CFNAVD; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
•
change feature fname=CFNA; TYPE1=TO; VALUE1=N;•
add/change sub-feature-data sub-id=sub_1; ACTIVE=Y; FNAME=CFNA; TYPE1=FDN1; VALUE1=DN;•
•
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. CFNA can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CFNA:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CFNA; type1=FDN1;value1=4692551001;
Note
Use a CLI command similar to the following to deactivate CFNA:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CFNA;Call Forward Redirection
The Session Initiation Protocol (SIP) response code 302 requests that a call be redirected to a new IP address/telephone number. The BTS implements SIP 302 as the Call Forward Redirection (CFR) feature.
The following subsection details the necessary steps to provision the CFR feature.
Step 1
add/change feature_name fname=CFR; description=call forward redirection;add/change feature FNAME=CFR; TDP1= T_EXCEPTION; TID1= CFR_TRIGGER; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325; DESCRIPTION=call forward redirection; GRP_FEATURE=NStep 2
add service; id=cfr; fname1=CFR;change trunk-grp-service-profile; tgn-id=<SIP trunk group id>; service-id=cfr;Step 3
change softsw-tg-profile id=10; protocol-type=SIP; redirect_supported= VALID_DOMAINS_ONLY;Step 4
change feature_config FNAME=CFNA; TYPE= SIP_302_SUPP; DATATYPE =STRING; VALUE=Y;change feature_config FNAME=CFC; TYPE= SIP_302_SUPP; DATATYPE =STRING; VALUE=NOANSWERchange feature_config FNAME=VM; TYPE= SIP_302_SUPP; DATATYPE =STRING; VALUE=NOANSWERStep 5
change softsw_tg_profile ID=tb11_sip_1; send-302-on-cf=Y
Call Forwarding Unconditional
Call Forwarding Unconditional is a service that lets you forward all your incoming calls to another telephone number until you explicitly deactivate it. When CFU is activated on your telephone line, you only hear a short reminder ring at your number, after which the forwarded telephone line is offered the call.
Tip
The following subsections identify necessary steps for the feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CFUA; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFU Activation; GRP_FEATURE=N;Step 2
add feature FNAME=CFUD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFU Deactivation; GRP_FEATURE=N;Step 3
add feature FNAME=CFUI; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFU Interrogation; GRP_FEATURE=N;Step 4
add feature FNAME=CFU; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FNAME1=CFUA; FNAME2=CFUD; FNAME3=CFUI; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFU; MCF=multiple call forwarding allowed; GRP_FEATURE=N;
Note
Step 5
add/change vsc fname=CFUA; digit-string=*72;Step 6
add/change vsc fname=CFUD; digit-string=#72#;Step 7
add/change vsc fname=CFUI; digit-string=*#72;Step 8
add service id=1; FNAME1=CFU;Step 9
change feature fname=CFU; type1=RR; value1=N;Step 10
change feature fname=CFU; TYPE1=MCF; VALUE1=Y;Step 11
change feature fname=CFU; TYPE1=INTL; VALUE1=Y;change feature fname=CFUA; TYPE1=INTL; VALUE1=Y;Step 12
change feature fname=[CFUA|CFUI]; TYPE2=SDT; VALUE2=STUTTER-DIAL-TONE;Step 13
change feature fname=CFUA; TYPE3=CC; VALUE3=ANS;Step 14
change feature fname=[CFUA|CFUD|CFUI]; TYPE4=FDT; VALUE4=DIAL-TONE;Step 15
add nod-restrict-list fname=CFU; nod=EMG;add nod-restrict-list fname=CFU; nod=FIRE;
Note
Caution
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step is required.
Step 1
add/change custom-dial-plan ID=cdp1;DIGIT-STRING=*72; NOD=VSC;FNAME=CFUA; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1;DIGIT-STRING=#72#; NOD=VSC;FNAME=CFUD; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1;DIGIT-STRING=*#72; NOD=VSC;FNAME=CFUI; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
•
•
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. CFU can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CFU:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CFU; type1=FDN1;value1=4692551001;
Note
Use a CLI command similar to the following to deactivate CFU:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CFU;Call Forwarding Variable for Basic Business Groups
The following subsections identify necessary steps for provisioning the Call Forwarding Variable for Basic Business Groups (CFVBBG) feature.
Tip
Note
Office Provisioning
Step 1
add feature FNAME=CFVABBG; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFVBBG - activation; GRP_FEATURE=N;Step 2
add feature FNAME=CFVBBG; FNAME1=CFVABBG; FNAME2=CFUD; FNAME3=CFUI; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CFV BBG; GRP_FEATURE=N;Step 3
add service id=1; FNAME1=CFVBBG;Step 4
change feature fname=CFVBBG; type1=RR; value1=N;Step 5
change feature fname=CFVBBG; TYPE1=MCF; VALUE1=Y;Step 6
This should be applied to CFU and CFUA:change feature fname=CFVBBG; TYPE1=INTL; VALUE1=Y;change feature fname=CFVABBG; TYPE1=INTL; VALUE1=Y;Step 7
change feature fname=CFVABBG; TYPE2=SDT; VALUE2=STUTTER-DIAL-TONE;Step 8
change feature fname=CFVABBG; TYPE3=CC; VALUE3=N;Step 9
change feature fname=CFVABBG; TYPE4=FDT; VALUE4=DIAL-TONE;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step is required.
Step 1
add/change custom-dial-plan ID=cdp1; DIGIT-STRING=*99; NOD=VSC; FNAME=CFVABBG; CAT-STRING=1111111111111111;
Note
MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
•
•
•
•
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. CFVBBG can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CFVBBG:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CFU; type1=FDN1;value1=4692551001;
Note
Use a CLI command similar to the following to deactivate CFVBBG:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CFU;Call Hold
The Call Hold (CHD) feature allows you to temporarily shut-off an active call, use the telephone for making another call, and then return to the original call. You can alternate between two calls.
There is an interaction when a Centrex subscriber has all three of the following features assigned and active:
•
•
•
In this case, the system does not invoke forwarding for any incoming calls. For the subscriber to have the call waiting features (CW or CIDCW) and CFNA active simultaneously, do not assign the CHD feature to the subscriber.
Tip
The following subsections identify necessary steps for the feature to be offered.
Office Provisioning
Step 1
add feature fname=CHD; tdp1=O_MID_CALL; tdp2=T_MID_CALL; tid1=O_SWITCH_HOOK_FLASH_IMMEDIATE; tid2=T_SWITCH_HOOK_FLASH_IMMEDIATE; ttype1=R; ttype2=R; description=Call Hold; feature_server_id=FSPTC235;Step 2
add service id=1; fname1=CHD; description=For some Centrex subscribers;
Subscriber Provisioning
The CHD feature is applicable only to a Centrex group.
Centrex Provisioning
For the CHD feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires the following steps:
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;Step 2
add custom-dial-plan ID=cdp1; DIGIT-STRING=*52; NOD=VSC; FNAME=CHD; CAT-STRING=1111111111111111;MLHG provisioning is similar to Centrex provisioning as described above.
Call Park, Call Park Retrieve
The Call Park (CPRK) feature allows a subscriber (parking party) to park an active call against its own DN or another DN within the Call Park subscriber group (CPSG). Once a call is parked, the parking party is free to make other calls, while the parked party remains parked. The parked party can be retrieved by any of the subscribers within the CPSG; otherwise, the call will be re-offered three times to the parking party.
The Call Park/Call Park Retrieve suite of features is available only to Centrex subscribers. The set of Centrex subscribers against a Centrex group are further subdivided into sets of Call Park Subscriber Groups (CPSGs).
Tip
The following subsections identify necessary steps for the CPRK amd CPRK_RET features to be offered.
Office Provisioning
Step 1
add feature FNAME=CPRK; TDP1=O_MID_CALL; TID1=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE1=R; TDP2=T_MID_CALL; TID2=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Park; GRP_FEATURE=N;Step 2
add feature FNAME=CPRK_RET; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Park Retrieve; GRP_FEATURE=N;Step 3
add cdp id=cdp1; DIGIT_STRING=*58; NOD=VSC; FNAME=CPRK; CAT_STRING=1111111111111111;Step 4
add cdp id=cdp1; DIGIT_STRING=*59; NOD=VSC; FNAME=CPRK_RET; CAT_STRING=1111111111111111;Step 5
add cpsg ID=cpsg1; TCPRK=30; CTXG_ID=ctxg1; CPRK_FDN=414;
Note
TCPRK is the Timed Recall (Re-offer) Timer
CPRK_FDN is the Forward-To DN, in case all the re-offers are exhaustedStep 6
add ca-config TYPE=CPRK_ANN; DATATYPE=INTEGER; VALUE=901;add ca-config TYPE=CPRK_CLEAR; DATATYPE=INTEGER; VALUE=902;Step 7
add ca-config; TYPE=CPRK-TIMER; DATATYPE=INTEGER; VALUE=60;add ca-config; TYPE=CPRK-HC-T1; DATATYPE=INTEGER; VALUE=24;
Note
If the configured timer value in the Ca-config and CPSG tables are 0, then this value will be used. If this is also not configured, then a default value of 60 secs will be used.Step 8
add annc ID=901; TYPE=SYSTEM; SEND_ANSWER=N; NUM_REPEAT=1; DURATION=20; ANNOUNCEMENT_FILE=ann_id_901.au; ROUTE_GUIDE_ID=annc1; ANNOUNCEMENT_NUMBER=323;add annc ID=902; TYPE=SYSTEM; SEND_ANSWER=N; NUM_REPEAT=1; DURATION=20; ANNOUNCEMENT_FILE=ann_id_902.au; ROUTE_DE_ID=annc1; ANNOUNCEMENT_NUMBER=323;
Subscriber Provisioning
Step 1
add service id=1; fname1=CPRK; fname2=CPRK_RET;Step 2
add/change subscriber-service-profile sub-id=sub1; service-id=1;Step 3
change ext2subscriber CTXG_ID=CTXgroup1; EXT=412; SUB_ID=sub1; CPSG_ID=cpsg1;The feature is only available for a Centrex group. Refer to above provisioning.
Provisioning Notes/Caveats
A call can be parked by a Centrex subscriber only against a subscriber in the same CPSG. Similarly, only a member of the same CPSG can retrieve a parked call.
Call Transfer
The Call Transfer (CT) service lets you transfer an active call to a third party, and your line exits the call.
Tip
The following subsections identify necessary steps for the CT feature to be offered.
Office Provisioning
Step 1
add/change feature FNAME=CT; TDP1=O_MID_CALL; TID1=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE1=R; TDP2=T_MID_CALL; TID2=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Transfer Feature;Step 2
add service id=2; FNAME1=CT;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=sub-1; service-id=2;Centrex and MLHG provisioning is similar to subscriber provisioning.
Call Waiting
Call Waiting is a service that enables you to accept an incoming call, even when you are already involved in a call, and allows you to alternate between the two calls. Assuming you are already involved in a call, and a third person is trying to call you, then with the call waiting feature enabled you will be notified distinctly of the new incoming call, and you have the choice to accept the call or ignore it. This way you do not miss any incoming calls.
A separate feature of call waiting is cancel-call-waiting, which you can use easily to advise that you do not wish to get notified of a call waiting for the entire duration of the call you are about to make.
There is an interaction when a Centrex subscriber has all three of the following features assigned and active:
•
•
•
In this case, the system does not invoke forwarding for any incoming calls. For the subscriber to have the call waiting features (CW or CIDCW) and CFNA active simultaneously, do not assign the CHD feature to the subscriber.
Tip
The following subsections identify necessary steps for the CW feature to be offered.
Office Provisioning
Step 1
add feature fname=CW; tdp1=T_BUSY; tid1=T_BUSY; ttype1=R; description=Call Waiting; feature_server_id=FSPTC235;add feature FNAME=CWDA; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Waiting Activation Feature;add/change feature FNAME=CWDD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Call Waiting-Deactivation Feature;Step 2
add service id=1; FNAME1=CW;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;For the CW feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber.
The CW feature is not applicable for subscriber category MLHG.
Alternate Activation and Deactivation Method
This feature is activated by default when it is assigned to a subscriber. CW can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CW:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CW;Use a CLI command similar to the following to deactivate CW:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CW;Call Waiting Deluxe
The following subsections identify necessary steps for provisioning the Call Waiting Deluxe (CWD) feature.
Tip
Office Provisioning
Step 1
add/change feature FNAME=CWD; TDP1=T_BUSY; TID1=T_BUSY; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=China Residential Call Waiting Deluxe Feature;add/change feature FNAME=CWDA; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=China Residential Call Waiting Deluxe Activation Feature;add/change feature FNAME=CWDD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=China Residential Call Waiting Deluxe Deactivation Feature;add/change feature FNAME=CWDI; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=China Residential Call Waiting Deluxe Interrogation Feature;Step 2
add service id=1; FNAME1=CWD; FNAME2=CWDA; FNAME3=CWDD; FNAME4=CWDI;Step 3
add vsc FNAME=CWDI; DIGIT-STRING=*56;add vsc FNAME=CWDA; DIGIT-STRING=*58;add vsc FNAME=CWDD; DIGIT-STRING=*59;Step 4
change feature fname=CWD; type1=TO; value1=25;Step 5
change ca-config type=RECONNECT-TMR; datatype=INTEGER; value=20;Step 6
change ca-config type=FEATURE-RECONNECT-TMR; datatype=INTEGER; value=20;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=sub_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step must be performed.
Step 1
add custom-dial-plan ID=cdp1; DIGIT-STRING=*58*; NOD=VSC; FNAME=CWDA; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=#58#; NOD=VSC; FNAME=CWDD; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=*#58*; NOD=VSC; FNAME=CWDI; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. CWD can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CWD:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CWD;Use a CLI command similar to the following to deactivate CWD:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CWD;Caller ID with Call Waiting
Calling Identity Delivery with Call Waiting (CIDCW) enables you to receive caller ID information about a calling party while talking to another party. This feature allows call waiting and caller ID to work together. If you are talking to one party and are alerted that another call is coming in, you may want to see who is calling before deciding to put the current party on hold and take the call.
Tip
The following subsections identify the necessary steps for the CIDCW feature to be offered.
Office Provisioning
Step 1
add feature fname=CIDCW; tdp1=T_BUSY; tid1=T_BUSY; ttype1=R; description=Caller Id with Call Waiting; feature_server_id=FSPTC235;Step 2
add service id=1; FNAME1=CIDCW;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber.
MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
The CIDCW feature requires the subscriber to already have the CND or CNAM feature assigned. The CND or CNAM feature enables the subscriber to see the calling party's information while ringing on a basic call and is a prerequisite before subscribing to the CIDCW feature.
Alternate Activation and Deactivation Method
This feature is activated by default when it is assigned to a subscriber. CIDCW can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate CIDCW:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=CIDCW;Use a CLI command similar to the following to deactivate CIDCW:
add subscriber-feature-data sub-id=sub_1; active=N; fname=CIDCW;Caller Name Blocking
The following subsections identify necessary steps for the Caller Name Blocking (CNAB) feature to be offered.
Note
Tip
Office Provisioning
Step 1
add/change feature FNAME=CNAB; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CNAB;Step 2
add vsc fname=CNAB; digit-string=*95;Step 3
add service id=1; FNAME1=CNAB;Step 4
change pop id=1; cnam_option=LOCAL_OR_LIDB;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step is required.
Step 1
add custom-dial-plan ID=cdp1; DIGIT-STRING=*95; NOD=VSC; FNAME=CNAB; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Calling Line Identity Presentation, Restriction
Provisioning for the CLIP and CLIR features is identical to CND and CNDB respectively, except for the change in feature-name. (See provisioning for CND and CNDB).
Note
Tip
Calling Name Delivery
Calling Name Delivery (CNAM) is a service that delivers the name of the calling person, the telephone number, and the local date and time when the call was delivered. Your telephone receiver must be equipped or attached to a caller-ID display device for you to view this information.
Tip
Prior to Release 5.0, a CNAM query is performed when a call is terminated to a subscriber with the CNAM feature. Beginning with Release 5.0, there is a separation of the call management server (CMS) and the media gateway controller (MGC), requiring the CNAM query to be performed at the MGC before routing the call to the CMS. To fulfill this requirement, the BTS 10200 allows the CNAM feature to be assigned to a trunk group.
The following sections explain the steps to provision the CNAM feature.
Office Provisioning
Step 1
add/change feature FNAME=CNAM; TDP1=FACILITY_SELECTED_AND_AVAILABLE; TD1=TERMINATION_RESOURCE_AVAILABLE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325; DESCRIPTION=CNAM;Step 2
add service service-id=1; FNAME1=CNAM;
Provisioning Resources
Step 1
add/change sg id=sg_1; description=signaling gateway 1;Step 2
add/change sg/grp id=sg_grp1; sg1-id=sg_1; description=signaling gateway group 1;Step 3
add/change sgp id=itp_7507_1; sg-id=sg_1; description=ITP 7507 for sg_1;Step 4
add/change sctp-assoc-profile id=sctp_prof; bundle_timeout=500;max_assoc_retrans=5max_path_retrans=5max_rto=6000; min_rto=301;sack_timeout=101;hb_timeout=1000;Step 5
add change sctp-assoc id=sctp_assoc1;sgp-id=itp_7507_1;sctp-assoc-profile-id=sctp_prof;remote_port=14001;remote_tsap_addr1=10.89.232.9;remote_tsap_addr2=10.89.233.41;local_revwin=64000;max_init_retrans=5;max_init_rto=1000;platform_id=FSPTC235;Step 6
add dpc id=stp1;point-code=1-101-0;description=STP1, MGTS STP;Step 7
add/change sccp-nw id=1; net=ind=NATIONAL; SUB_SVC=NATIONAL; HOP-Count=10;Step 8
add subsystem-grp id=SSN_CNAM; PLATFORM_ID=FSPTC235; TCAP_VERSION=ANS92;Step 9
add subsystem id=SSN_CNAM; opc_id=opc; local-ssn=232; remote-ssn=232; sccp-nw-id=1; SCCP_VERSION=ANS92; APPLICATION_VERSION=IN1;Step 10
add routing-key id=rk_cnam; opc-id-opc; sg-grp-id=sg_grp; si=SCCP; rc=204; PLATFORM_ID=FSPTC235; ssn-id=SSN_CNAM;Step 11
add sccp-route opc_id=opc; dpc_id=stp1; subsystem_grp_id=SSN_CNAM; rk_id=rk_cnam;Step 12
add slhr-profile id=slhr_cnam;Step 13
add slhr id=slhr_cnam; opc_id=opc; dpc_id=stp1; rk_id=rk_cnam; ssn_id=232; gtt-req=1; tt=5; GTT_ADDR_TYPE=CLGN; GTT_ADDR=3;Step 14
Add ca-config type=DEFAULT-LIDB-SLHR-ID; type=string; value=slhr_cnam;Step 15
control sctp-assoc id=sctp_assoc1; mode=FORCED; target-state=INS;Step 16
control subsystem-grp id=SSN_CNAM; mode=FORCED; target-state=INS;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id-subscriber_1; service-id=1
Trunk Group Provisioning
Step 1
add trunk_grp_service_profile tgn_id=1;service_id=1;The trunk-grp-service-profile table associates a trunk group to services. In the above command, the service-id i= 1 corresponds to CNAM service as provisioned.
In addition to assigning the CNAM service to a trunk group, as described above, for the feature to be fully functional for SS7 and ISDN, additional provisioning is required as follows:
•
change SS7-ansi-tg-profile id=SS7pf1; SEND_GN=Y;•
change ISDN-dchan-profile id=rudp_dchan; FACIL_IE_SUPP=Y;Centrex Provisioning
Centrex provisioning for the CNAM feature is similar to a POTS subscriber.
MLHG Provisioning
MLHG provisioning for the CNAM feature is similar to subscriber provisioning.
Calling Number Delivery
Calling Number Delivery (CND) displays the telephone number of the calling person, along with the local date and time when the call was delivered to your phone line. You can then decide whether or not to accept the call.
Your telephone receiver must be equipped with or attached to a "Caller-ID" display device for you to view the information.
Tip
The following subsections identify necessary steps for the CND feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CND; TDP1=FACILITY_SELECTED_AND_AVAILABLE; TID1=TERMINATION_RESOURCE_AVAILABLE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CND;Step 2
add service id=1; FNAME1=CND;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex Office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber.
MLHG provisioning is similar to subscriber provisioning as described above.
Calling Number Delivery Blocking
The Calling Number Delivery Blocking (CNDB) service provides you with the ability to toggle the status of your number privacy. If you have number privacy, using CNDB you could make the next call number public. On the other hand, if do not have number privacy, you could make the next call number private.
•
•
Since this service is on a per call basis, enable CNDB for each calling number when you do not want the called number displayed.
Tip
The following subsections identify necessary steps to activate the CNDB feature.
Office Provisioning
Step 1
add feature FNAME=CNDB; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CNDB;Step 2
add vsc fname=CNDB; digit-string=*67;Step 3
add service id=1; FNAME1=CNDB;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning to a POTS subscriber. In addition, the following step must be performed:
Step 1
Add custom-dial-plan ID=cdp1; DIGIT-STRING=*67; NOD=VSC; FNAME=CNDB; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Caller Identity Delivery Suppression-Delivery
Calling Identity Delivery and Suppression (CIDSD) allows a subscriber to explicitly specify on a per-call basis whether both calling name and calling number will be treated as private or public. There are separate star codes for delivery or suppression. If the user enters the code for delivery, then, regardless of the subscriber's default privacy, the name and number will be treated as public. If the user enters the code for suppression, then, likewise, regardless of the default privacy, the user's name and number will be treated as private.
Tip
The following subsections identify necessary steps for the CIDSD feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CIDSD; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CIDSD;Step 2
add vsc fname=CIDSD; digit-string=*82;Step 3
add service id=1; FNAME1=CIDSD;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex Office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, perform the following step.
Step 1
Add custom-dial-plan ID=cdp1; DIGIT-STRING=*82; NOD=VSC; FNAME=CIDSD; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Caller Identity Delivery Suppression-Suppression
Tip
The following subsections identify necessary steps for the CIDSS feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CIDSS; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CIDSS;Step 2
add vsc fname=CIDSS; digit-string=*96;Step 3
add service id=1; FNAME1=CIDSS;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step must be performed.
Step 1
Add custom-dial-plan ID=cdp1; DIGIT-STRING=*96; NOD=VSC; FNAME=CIDSS; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Cancel Call Waiting
The Cancel Call Waiting (CCW) service allows you to turn off your existing call waiting service for the entire duration of the current call or the next call you plan to make.
Tip
The following subsections identify necessary steps for the CCW feature to be offered.
Office Provisioning
Step 1
add feature FNAME=CCW; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; TDP2=O_MID_CALL; TID2=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; TDP3=T_MID_CALL; TID3=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE3=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=CCW;Step 2
add vsc fname=CCW; digit-string=*70;Step 3
add service id=1; FNAME1=CCW;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=subscriber_1; service-id=1;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step must be performed.
Step 1
Add custom-dial-plan ID=cdp1; DIGIT-STRING=*70; NOD=VSC; FNAME=CCW; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Class of Service Screening
The Class of Service (COS) Screening feature is a screening process based on Class of Service.
Tip
The following subsections identify necessary steps to provision the COS feature.
Office Provisioning
Step 1
Add feature FNAME=COS; tdp1=COLLECTED-INFORMATION; tid1=COS-TRIGGER; ttype1=R; feature_server_id=FSPTC235; description=Class Of Service; grp_feature=N;Step 2
Add service id=special-srv; fname1=COS;
Note
Step 3
Add/change cos-restrict id=basic-restrict; casual-restrict-type=<applicable-values>; national-restrict-type=<applicable-values>; national-wb-list=<applicable-values>; intl-restrict-type=<applicable-values>; ii-restrict=<applicable-values>; nod-wb-list=<applicable-values>; acct-code-allow=<applicable-values>; acct-code-length=<applicable-values>; auth-code-allow=<applicable-values>; auth-code-length=<applicable-values>; auth-code-grp-id=<applicable-values>;Step 4
Auth-code-grp, Auth-code, Casual-wb-list, Intl-wb-list, Lata, Lata-map, National-wb-list;Step 5
change ca-config type=ACCT-CODE-PROMPT-DELAY; datatype=integer; value=200;change ca-config type=AUTH-CODE-PROMPT-DELAY; datatype=integer; value=250;
Note
Provisioning Resources
Step 1
Add trunk-grp-feature-data tgn-id=isdn-1; tg=isdn-trunk-1; casual-call=Y/N; cos-restrict-id=new-age-restriction;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;Step 2
add subscriber sub-id=sub1_plano.com; cos-restrict-id=new-age-restriction;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning for IVR Collection of Account/Authorization Codes
Step 1
Note
SHOW CA-CONFIG-BASE TYPE=DEFAULT-IVR-ROUTE-GUIDE-ID; DATATYPE=STRING; VALUE=def_ivr_rg;Step 2
add ivr-script-profile fname=COS; ivr-access-mode=IVR; ivr-route-guide-id=cos_ivr_rg; ivr-script-pkg-type=BAU; multiple-language-supp=N;Step 3
add language id=def;Step 4
add audio-segment; id=AUTH-PROMPT; type=PHYSICAL; url=http://cos/auth.au;Step 5
add audio-segment; id=ACCT-PROMPT; type=PHYSICAL; url=http://cos/acct.au;Step 6
add audio-seq id=cos_auth_prm_seq; language_id=def; seq=AUTH-PROMPT;Step 7
add audio-seq id=cos_acct_prm_seq; language_id=def; seq=ACCT-PROMPT;
Note
Step 8
add feature-config fname=COS; type=FDT_TIMER; datatype=INTEGER; value=100;add feature-config fname=COS; type=IDT_TIMER; datatype=INTEGER; value=40;
Subscriber Provisioning
Step 1
change COS-RESTRICT id=test; PROMPT-METHOD=IVR;Step 2
change cos-restrict id=test; ALLOW-CALLS-ON-IVR-FAILURE=Y;
Centrex Provisioning
Provisioning is similar to subscriber provisioning and basic Centrex provisioning.
Codec Negotiation
Codec negotiation is a process that is used during call transition states to change from the selected codec to a different one. Codec negotiation allows calls to be started using a certain low speed codec (for example, on-net calls) and, depending on the features used, a different codec may be needed to complete the feature call. Thus the codec is first selected and then negotiated as necessary for transition states in the call.
Note
Codec Selection
Codec selection allows calls to be established using a variety of encoding and decoding DSP devices (codec) to compress voice for transmission via the RTP. With the proper codec selection for calls, bandwidth can be conserved, allowing more calls to be carried on the same equipment and improving the economics of the VoIP solution.
Custom Dial Plan
The following subsections identify necessary steps for provisioning the Custom Dial Plan (CDP) feature.
Office Provisioning
Step 1
add feature FNAME=CDP; TDP1=COLLECTED_INFORMATION; TID1=CUSTOMIZE_DIALING_PLAN; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Custom Dial Plan Feature;Step 2
add service id=2; FNAME1=CDP;
Centrex Provisioning
Step 1
add subscriber-service-profile sub_id=sub_1; service-id=2;
MLHG Provisioning
MLHG provisioning is only applicable for MLHG-CTX and is similar to Centrex provisioning.
Provisioning Notes/Caveats
The CDP feature should be assigned to every Centrex category user.
Customer Originated Trace
The Customer Originated Trace (COT) feature allows subscribers to generate a record of an incoming harassing call. The data that will be recorded is the date and time of the trace, the calling DN, the unique/non-unique nature of the calling DN, the customer's DN, the customer's termination id, answer indication, call-waited indication, and the date/time of the call. This feature works with announcements or tones to prompt the user to generate a trace.
Tip
The following subsections identify necessary steps for the COT feature to be offered.
Office Provisioning
Step 1
add feature fname=COT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Customer Originated Trace; feature_server_id=FSPTC235;Step 2
add vsc fname=COT; digit_string=*57;Step 3
change ca-config type=DEFAULT-OFFICE-SERVICE-ID; datatype=string; value=467;Step 4
Add service id=467; FNAME1=COT;
Subscriber Provisioning
Step 1
Add service id=special-srv; fname=COT;Step 2
add subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;Step 3
add subscriber-feature-data sub-id=sub1_plano.com; type1=DENIED; value1=Y;Step 4
change subscriber id=sub1_plano.com; USAGE-SENS=Y;
Centrex Provisioning
Step 1
add cdp id=cdp1; DIGIT_STRING=*57; NOD=VSC; FNAME=COT;MLHG provisioning is similar to subscriber provisioning as described above.
Direct Call Pickup Without Barge-In
Direct Call Pickup (DPN) allows a user in a basic business group (BBG) to answer a call to a telephone from another telephone within the business group.
Directed Call Pickup has two versions, with and without barge-in capability.
Tip
The following subsections identify necessary steps for the DPN feature to be offered:
Office Provisioning
Step 1
add feature FNAME=DPN; FEATURE_SERVER_ID=FSPTC235; GRP_FEATURE=N; DESCRIPTION=Direct Call Pickup Without Barge-In Feature;Step 2
add service ID=2; FNAME1=DPN;
Centrex Provisioning
Step 1
add subscriber-service-profile SUB_ID=SUB_1; SERVICE-ID=2;Step 2
add custom-dial-plan ID=cdp1; DIGIT-STRING=*23; NOD-VSC; FNAME=DPN; CAT-STRING=1111111111111111;
MLHG Provisioning
Applicable for MLHG_CTX only; provisioning is similar to Centrex provisioning.
Direct Call Pickup With Barge-In (DPU)
The following subsections identify necessary steps to provision Direct Call Pickup with barge-in:
Office Provisioning
Step 1
add feature FNAME=DPU; FEATURE_SERVER_ID=FSPTC235; GRP_FEATURE=N; DESCRIPTION=Direct Call Pickup With Barge-In Feature;Step 2
add service ID=2; FNAME1=DPU;
Centrex Provisioning
Step 1
add subscriber-service-profile SUB_ID=SUB_1; SERVICE-ID=2;Step 2
add custom-dial-plan ID-cdp1; DIGIT-STRING=*24; NOD-VSC; FNAME-DPU; CAT-STRING=1111111111111111;
MLHG Provisioning
This feature is applicable for MLHG_CTX only. MLHG provisioning is similar to Centrex provisioning.
Distinctive Alerting/Call Waiting Indication
The Distinctive Alerting/Call Waiting Indication (DA/CWI) feature provides Centrex users special ringing and CW tones on DID calls. This feature is available only to Centrex subscribers.
Note
Tip
The following subsections identify necessary steps to offer the DA/CWI feature.
Office Provisioning
Step 1
add feature FNAME=DACWI; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; GRP_FEATURE=N; DESCRIPTION=Distinctive Alerting / Call Waiting Indication Feature;Step 2
add service id=2; FNAME1=DACWI;
Subscriber Provisioning
The DA/CWI feature applies only to a Centrex group.
Centrex Provisioning
Step 1
add subscriber-service-profile sub_id=sub-1; service-id=2;
MLHG Provisioning
This feature is only applicable to MLHG-CTX. MLHG provisioning is similar to Centrex provisioning.
Do Not Disturb
The Do Not Disturb (DND) feature, based on the Telcordia document SR-504 SPCS Capabilities and Features, (FSD-01-02-0750), routes incoming calls either to a special do not disturb announcement or to a special tone.
A single flash ring, called a reminder ring, can be played to the DND user. This feature option is provisioned in the feature table. See Office Provisioning, Step 5.
Note
Tip
The following subsections identify necessary steps to provision the DND feature.
Office Provisioning
Step 1
add feature FNAME=DND_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; FEATURE_SERVER_ID=FSPTC235; TTYPE1=R; DESCRIPTION=DND Activation; GRP_FEATURE=N;Step 2
add feature FNAME=DND_DEACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=DND Deactivation; GRP_FEATURE=N;Step 3
add feature FNAME=DND; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Do not disturb; GRP_FEATURE=N;Step 4
add vsc DIGIT_STRING=*78; FNAME=DND_ACTadd vsc DIGIT_STRING=*79; FNAME=DND_DEACT;Step 5
add/change subscriber_feature_data fname=DND; sub_id=<sub id>; type1=RR; value1=Y;
Subscriber Provisioning
Step 1
add service id=1; fname1=DND; fname2=DNDA; fname3=DNDD;Step 2
add/change subscriber-service-profile; sub-id=<sub id>; service-id=1;
Centrex Provisioning
Step 1
add/change cdp; id=cdp1; DIGIT_STRING=*78; NOD=VSC; FNAME=DND_ACT; CAT_STRING=1111111111111111add/change cdp; id=cdp1; DIGIT_STRING=*79; NOD=VSC; FNAME=DND_DEACT; CAT_STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. DND can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate DND:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=DND;Use a CLI command similar to the following to deactivate DND:
add subscriber-feature-data sub-id=sub_1; active=N; fname=DND;Group Speed Call: 1-Digit and 2-Digit
Tip
The following subsections identify necessary steps for the GSC1D and GSC2D features to be offered.
Office Provisioning
Step 1
add feature fname=GSC1D; tdp1=COLLECTED_INFORMATION; tid1=SC1D_TRIGGER; ttype1=R; description=Group One Digit Speed Call Activation; feature_server_id=FSPTC235;Step 2
add feature fname=GSC2D; tdp1=COLLECTED_INFORMATION; tid1=SC2D_TRIGGER; ttype1=R; description=Group Two Digit Speed Call Activation; feature_server_id=FSPTC235;Step 3
Add service id=499; fname1=GSC1D; fname2=GSC2D;
Subscriber Provisioning
Step 1
Add sub-service-profile sub-id=sub_1_4; service-id=499;
Centrex Provisioning
In addition to subscriber provisioning, provision the Custom Dial Plan (CDP) Table:
Step 1
add custom-dial-plan ID=cdp1; DIGIT-STRING=2; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=3; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=4; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=5; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=6; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=7; NOD=SPEED-CALL; FNAME=SC1D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=2x; NOD=SPEED-CALL; FNAME=SC2D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=3x; NOD=SPEED-CALL; FNAME=SC2D; CAT-STRING=1111111111111111;add custom-dial-plan ID=cdp1; DIGIT-STRING=4x; NOD=SPEED-CALL; FNAME=SC2D; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Alternate Provisioning Method
GSC1D can alternately be provisioned or removed by creating an entry in the SC1D table.
Use a CLI command similar to the following to provision the GSC1D code:
add sc1d sub-id=sub_1; dnx=4692551001;
Use a CLI command similar to the following to remove provisioning for the GSC1D code:
add sc1d sub-id=sub_1; dnx=NULL;
Note
Note
GSC2D can alternately be provisioned or removed by creating an entry in the SC2D table.
Use a CLI command similar to the following to provision the GSC2D code:
add sc2d sub-id=sub_1; dnx=4692551001;
Use a CLI command similar to the following to remove provisioning for the GSC2D code:
add sc2d sub-id=sub_1; dnx=NULL;
Note
Note
Hotline
The Hotline feature enables you to get connected to a pre-defined telephone user by lifting the handset. The Hotline feature can be used as a special high priority line or for a frequently called number.
Tip
The following subsections identify necessary steps for the Hotline feature to be offered.
Office Provisioning
Step 1
Add feature FNAME=HOTLINE; tdp1=O_ATTEMPT_AUTHORIZED; tid1=O_ATTEMPT_AUTHD; ttype1=R; feature_server_id=FSPTC235; description=Hotline; grp_feature=N;Step 2
Add service id=special-srv; fname1=HOTLINE;
Note
Provisioning Resources
Step 1
add/change mgw-profile id=plano-iad; mgcp-version=MGCP_1_0;
Note
Step 2
add/change mgw-profile id=plano-iad; mgcp-to-supp=Y;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;Step 2
add subscriber-feature-data sub-id=sub1_plano.com; fname=HOTLINE; type1=FDN1; value1=9726712355;
Centrex Provisioning
Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Hotline—Variable
Tip
The following subsections identify necessary steps for the Hotline—Variable (HOTV) feature to be offered.
Note
Office Provisioning
Step 1
Add feature FNAME=HOTVx; tdp1=COLLECTED-INFORMATION; tid1=VERTICAL-SERVICE-CODE; ttype1=R; feature_server_id=FSPTC235; description=Hotline-Variable Act / Deact; grp_feature=N;
Note
Step 2
add vsc fname=HOTVA; digit-string=*52*;Step 3
add vsc fname=HOTVD; digit-string=#52#;Step 4
add vsc fname=HOTVI; digit-string=*#52*;Step 5
add service id=special-srv; FNAME1=HOTV; FNAME2=HOTVA; FNAME3=HOTVD; FNAME4=HOTVI;Step 6
Add nod-restrict-list fname1=HOTV; call-type=EMG;
Note
Step 7
Add/change feature FNAME=HOTV; type1=TO; value1=6;
Note
Provisioning Resources
Step 1
add/change mgw-profile id=plano-iad; mgcp-version=MGCP_1_0;
Note
Step 2
add/change mgw-profile id=plano-iad; mgcp-to-supp=Y;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;
Centrex Provisioning
For the feature, in addition to basic Centrex Office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following steps must be performed.
Step 1
Add/change custom-dial-plan ID=cdp1;DIGIT-STRING=*52*; NOD=VSC;FNAME=HOTVA; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1;DIGIT-STRING=#52#; NOD=VSC;FNAME=HOTVD; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1; DIGIT-STRING=*#52*; NOD=VSC; FNAME=HOTVI; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. HOTV can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate HOTV:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=HOTV; type1=FDN1;value1=4692551001;
Note
Use a CLI command similar to the following to deactivate HOTV:
add subscriber-feature-data sub-id=sub_1; active=N; fname=HOTV;Incoming Simulated Facility Group
The following subsections identify necessary steps for the Incoming Simulated Facility Group (ISFG) feature to be offered.
Office Provisioning
Step 1
add feature FNAME=ISFG; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; GRP_FEATURE=N; DESCRIPTION=Incoming Simulated Facility Group Feature;Step 2
add service id=2; FNAME1=ISFG;
Centrex Provisioning
Step 1
add subscriber-service-profile sub_id=sub_1; service-id=2;Step 2
Change ctxg ID=ctxg1; SFG_CONTROL=Y; IN_SFG_COUNT=3; OUT_SFG_COUNT=3; BOTH_SFG_COUNT=4;This feature is only applicable to MLHG-CTX. MLHG provisioning is similar to Centrex provisioning as described above.
Provisioning Notes/Caveats
SFG controls will be effective only if the subscriber(s) are assigned SFG features and the Centrex-grp table has the SFG-Control flag set to Y.
IP Transfer Point Non-Stop Operation
The IP Transfer Point (ITP) Non-Stop Operation (NSO) feature enhances the current ITP high availability support on the Cisco 7500 platform. It allows an ITP running on a Cisco 7500 router to continue operation in the event of a Route/Switch Processor (RSP) failure. The NSO feature supports two Signaling Gateway Platforms (SGPs) per Signaling Gateway (SG) in a Signaling Gateway Group (SG-grp) for mated Signal Transfer Points (STPs) and also supports the Sigtran M3UA and Single User Account (SUA) Application Server Process (ASP) load-share traffic modes.
The following steps are necessary for provisioning the NSO feature.
NSO Configuration: D-Link for ISUP with ASP Load Sharing
Perform the following steps to provision an NSO D-Link configuration for ISUP with ASP load sharing.
Step 1
add sg id=sgw100; internal_redundancy_mode=SSO-NSO;description=SS7 Signaling Gateway ANSI testing;priority=1;add sg id=sgw110; internal_redundancy_mode=SSO-NSO;description=SS7 Signaling Gateway ANSI testing;priority=1;Step 2
add sg-grp id=sg-grp100; sg1-id=sgw100;sg2-id=sgw110; sg-grp-mode=Mated_STP;description=SG Group for ANSI testing;Step 3
add sgp id=sgw100-sgp1; sg-id=sgw100; description=SGP on ITP va-7507-3;add sgp id=sgw100-sgp2; sg-id=sgw100; description=SGP on ITP va-7507-3;add sgp id=sgw110-sgp1; sg-id=sgw110; description=SGP on ITP va-7507-6;add sgp id=sgw110-sgp2; sg-id=sgw110; description=SGP on ITP va-7507-6;Step 4
add opc id=opc1; point-code=250-250-3; point-code-type=ANSI_CHINA;description= Network Point Code 1;add dpc id=hollyville; point-code=250-248-4; point-code-type=ANSI_CHINA; description=ANSI SS7 network DPC;add dpc id=havenville; point-code=250-248-6; point-code-type=ANSI_CHINA; description=ANSI SS7 network DPC;Step 5
add sctp-assoc-profile id=sctp_pf100;Step 6
add sctp-assoc id=CA-assoc1; sgp-id=sgw100-sgp1;sctp_assoc-profile-id=sctp_pf100; platform-id=CA146; remote-port=2905; REMOTE_TSAP_ADDR1=10.0.1.230;add sctp-assoc id=CA-assoc2; sgp-id=sgw100-sgp2;sctp_assoc-profile-id=sctp_pf100; platform-id=CA146; remote-port=2907; REMOTE_TSAP_ADDR1=10.128.7.8;add sctp-assoc id=CA-assoc3; sgp-id=sgw110-sgp1;sctp_assoc-profile-id=sctp_pf100; platform-id=CA146; remote-port=2905; remote-tsap-addr1=10.0.5.216;add sctp-assoc id=CA-assoc4; sgp-id=sgw110-sgp2;sctp_assoc-profile-id=sctp_pf100; platform-id=CA146; remote-port=2907; remote-tsap-addr1=10.128.2.7;Step 7
add routing-key id=NewMatedSG-rk; opc-id=opc1; sg-grp-id=sg-grp100; si=ISUP; platform-id=CA146; rc=60; description=Dual processor Signaling Gateway;Step 8
add call-ctrl-route id=holly-ccr; routing-key-id=NewMatedSG-rk; dpc-id=hollyville; user-part-variant-id=ANSISS7_GR317; si=ISUP; description=Call Control Route for ANSI ISUP DPC;add call-ctrl-route id=haven-ccr; routing-key-id=NewMatedSG-rk; dpc-id=havenville; user-part-variant-id=ANSISS7_GR317; si=ISUP; description=Call Control Route for ANSI ISUP DPC;Step 9
Step 10
control sctp-assoc id=CA-assoc1;mode=forced;target-state=ins;control sctp-assoc id=CA-assoc2;mode=forced;target-state=ins;control sctp-assoc id=CA-assoc3;mode=forced;target-state=ins;control sctp-assoc id=CA-assoc4;mode=forced;target-state=ins;
NSO Configuration: D-link for TCAP with ASP Load Sharing
Perform the following steps to provision a D-link for TCAP NSO configuration with ASP load sharing.
Step 1
add sg id=sgw100; internal_redundancy_mode=SSO-NSO;description=SS7 Signaling Gateway ANSI testing;priority=1;add sg id=sgw110; internal_redundancy_mode=SSO-NSO;description=SS7 Signaling Gateway ANSI testing;priority=1;Step 2
add sg-grp id=sg-grp100; sg1-id=sgw100;sg2-id=sgw110; sg-grp-mode=Mated_STP;description=SG Group for ANSI testing;Step 3
add sgp id=sgw100-sgp1; sg-id=sgw100; description=SGP on ITP va-7507-3;add sgp id=sgw100-sgp2; sg-id=sgw100; description=SGP on ITP va-7507-3;add sgp id=sgw110-sgp1; sg-id=sgw110; description=SGP on ITP va-7507-6;add sgp id=sgw110-sgp2; sg-id=sgw110; description=SGP on ITP va-7507-6;Step 4
add opc id=opc1; point-code=250-250-3; point-code-type=ANSI_CHINA;description= Network Point Code 1;add dpc id=cap_dpc1;point-code=1-101-0;point-code-type=ANSI_CHINA;description=Capability Point Code for remote STP with GTT;add dpc id=office2; point-code=250-250-3; description= Destination point code for IMT;Step 5
add sctp-assoc id=FSAIN-assoc1; sgp-id=sgw100-sgp1; sctp_assoc-profile-id=sctp_pf100;platform-id=FSAIN205; remote-port=14001;REMOTE_TSAP_ADDR1=10.0.1.230;add sctp-assoc id=FSAIN-assoc2; sgp-id=sgw100-sgp2; sctp_assoc-profile-id=sctp_pf100; platform-id=FSAIN205; remote-port=14002; REMOTE_TSAP_ADDR1=10.128.7.8;add sctp-assoc id=FSAIN-assoc3; sgp-id=sgw100-sgp1; sctp_assoc-profile-id=sctp_pf100;platform-id=FSPTC235; remote-port=14001;REMOTE_TSAP_ADDR1=10.0.1.230;add sctp-assoc id=FSAIN-assoc4; sgp-id=sgw100-sgp2; sctp_assoc-profile-id=sctp_pf100; platform-id=FSPTC235; remote-port=14002; REMOTE_TSAP_ADDR1=10.128.7.8;add sctp-assoc id=FSPTC-assoc1; sgp-id=sgw110-sgp1; sctp_assoc-profile-id=sctp_pf100; platform-id=FSAIN205; remote-port=14001;REMOTE_TSAP_ADDR1=10.0.5.216;add sctp-assoc id=FSPTC-assoc2; sgp-id=sgw110-sgp2; sctp_assoc-profile-id=sctp_pf100; platform-id=FSAIN205;remote-port=14002;REMOTE_TSAP_ADDR1=10.128.2.7;add sctp-assoc id=FSPTC-assoc3; sgp-id=sgw110-sgp1; sctp_assoc-profile-id=sctp_pf100;platform-id=FSPTC235; remote-port=14001;REMOTE_TSAP_ADDR1=10.0.5.216;add sctp-assoc id=FSPTC-assoc4; sgp-id=sgw110-sgp2; sctp_assoc-profile-id=sctp_pf100; platform-id=FSPTC235; remote-port=14002; REMOTE_TSAP_ADDR1=10.128.2.7;Step 6
add feature fname=LNP; feature-server-id=FSAIN205; description=Local number portability; tdp1=COLLECTED_INFORMATION; tid1=LNP_TRIGGER; ttype1=R;add feature fname=8XX; tdp1=COLLECTED_INFORMATION; tid1=SPECIFIC_DIGIT_STRING; ttype1=R; description=Toll Free Number; feature_server_id=FSAIN205;add feature fname=CNAM;tdp1=FACILITY_SELECTED_AND_AVAILABLE; tid1=TERMINATION_RESOURCE_AVAILABLE; ttype1=R; description=Calling Name; feature_server_id=FSPTC235;add feature fname=AC; fname1=AC_ACT; fname2=AC_DEACT; feature_server_id=FSPTC235;add feature fname=AR; fname1=AR_ACT; fname2=AR_DEACT; feature_server_id=FSPTC235;Step 7
add sccp-nw id=6;net-ind=NATIONAL;sub-svc=NATIONAL;hop-count=3;Step 8
add subsystem-grp id=SSN_LNP1;platform_id=FSAIN205;tcap-version=ANS92; description=SS grp profile for LNP svc;add subsystem-grp id=SSN_AIN_800_1; platform-id=FSAIN205;tcap-version=ANS92; description=SSN grp profile for 800 svc;add subsystem-grp id=SSN_CNAM1; platform-id=FSPTC235;tcap-version=ANS92; description=SSN grp profile for CNAM svc;add subsystem-grp id=SSN_ACAR1; platform-id=FSPTC235;tcap-version=ANS92; description=SSN grp profile for AC/AR svc;Step 9
add subsystem id=SSN_LNP1; opc-id=opc1; local-ssn=247;remote-ssn=247; sccp-nw-id=6;sccp-version=ANS92; application-version=AIN01;add subsystem id=SSN_AIN_800_1; opc-id=opc1; local-ssn=248;remote-ssn=248; sccp-nw-id=6;sccp-version=ANS92; application-version=AIN01;add subsystem id=SSN_CNAM1; opc-id=opc1; local-ssn=232;remote-ssn=232; sccp-nw-id=6; sccp-version=ANS92; application-version=IN1;add subsystem id=SSN_ACAR1; opc-id=opc1; local-ssn=251;remote-ssn=251;sccp-nw-id=6;sccp-version=ANS92;APPLICATION_VERSION=IN1;Step 10
add routing-key id=NewMatedSG-rk1; opc-id=opc1; sg-grp-id=sg-grp100;si=sccp;subsystem-grp-id=SSN_LNP1;platform-id=FSAIN205; rc=161; description=Routing Key for SUA User Adaptation layer;add routing-key id=NewMatedSG-rk2; opc-id=opc1; sg-grp-id=sg-grp100; si=sccp;subsystem-grp-id=SSN_AIN_800_1;platform-id=FSAIN205; rc=162; description=Routing Key for SUA User Adaptation layer in FSAIN205;add routing-key id=NewMatedSG-rk3; opc-id=opc1; sg-grp-id=sg-grp100; si=sccp;subsystem-grp-id=SSN_CNAM1;platform-id=FSPTC235; rc=163; description=Routing Key for SUA User Adaptation layer in FSPTC235;add routing-key id=NewMatedSG-rk4; opc-id=opc1; sg-grp-id=sg-grp100;si=sccp;subsystem-grp-id=SSN_ACR1;platform-id=FSPTC235; rc=164;description=Routing Key for SUA User Adaptation layer in FSPTC235;Step 11
add sccp-route opc-id=opc1; dpc-id=cap_dpc1; rk-id=NewMatedSG-rk1; subsystem-grp-id=SSN_LNP1;description=SCCP route for FSAIN LNP service;add sccp-route opc-id=opc1;dpc-id=cap_dpc1;rk-id=NewMatedSG-rk2;subsystem-grp-id=SSN_AIN_800_1;descriptio n=SCCP route for 800 service in FSAIN;add sccp-route opc-id=opc1;dpc-id=cap_dpc1;rk-id=NewMatedSG-rk3;subsystem-grp-id=SSN_CNAM1;description= SCCP route for FSPTC CNAM service;add sccp-route opc-id=opc1;dpc-id=office2;rk-id=NewMatedSG-rk4;subsystem-grp-id=SSN_ACAR1;description= SCCP route for FSPTC ACAR service;add call-ctrl-route id=office2-ccr; routing-key-id=NewMatedSG-rk;dpc-id=office2;user-part-variant-id=ANSISS7_GR317; si=ISUP; description=Call Control Route for Office2 destination;Step 12
Step 13
control sctp-assoc id=FSAIN-assoc1;mode=forced;target-state=ins;control sctp-assoc id=FSAIN-assoc2;mode=forced;target-state=ins;control sctp-assoc id=FSAIN-assoc3;mode=forced;target-state=ins;control sctp-assoc id=FSAIN-assoc4;mode=forced;target-state=ins;Step 14
control sctp-assoc id=FSPTC-assoc1;mode=forced;target-state=ins;control sctp-assoc id=FSPTC-assoc2;mode=forced;target-state=ins;control sctp-assoc id=FSPTC-assoc3;mode=forced;target-state=ins;control sctp-assoc id=FSPTC-assoc4;mode=forced;target-state=ins;
Limited Call Duration
The Cisco BTS 10200 Softswitch supports the Limited Call Duration (LCD) feature, including both prepaid and postpaid services. This support includes interfaces to an authentication, authorization, and accounting (AAA) server. The LCD feature can be assigned to any Cisco BTS 10200 Softswitch subscriber with any phone type, including Media Gateway Control Protocol (MGCP)-based, Session Initiation Protocol (SIP)-based, and network-based call signaling (NCS)-based phones.
Note
Step 1
add trigger-nod-escape-list tid=LCD_TRIGGER; nod=REPAIR;Step 2
Note
add radius-profile id=rad-profile-prepd015; tsap-addr=central777.cisco.com:1819; server-type=prepaid;add radius-profile id=rad-profile-prepd777; tsap-addr=172.16.5.5:1819; server-type=prepaid;Step 3
add aaa-server-grp id=aaa-server-grp1; radius-profile-id=rad-profile-prepd015;Step 4
change pop id=londonpop3; aaa-server-grp-id=aaa-server-grp1;Step 5
add feature fname=LCD; tdp1=COLLECTED_INFORMATION; tid1=LCD_TRIGGER; ttype1=R; description=Limited Call Duration Feature; feature-server=FSPTC235; grp-feature=N;Step 6
add service id=5; fname1=LCD; description=Prepaid Service;Step 7
add sub-service-profile sub-id=nyc-sub1; service-id=5;Step 8
Note
add ca-config type=RELEASE-CALL-ON-LCD-TRIGGER-FAILURE; datatype=BOOLEAN; value=N;
Local Number Portability for ANSI/North America
Local Number Portability (LNP) enables subscribers to keep their phone numbers after changing service providers. LNP in North America performs SS7 ANSI TCAP queries to an external SCP database.
Tip
The following subsections identify necessary steps for the LNP feature to be offered in North America. See the"Local Number Portability for ITU Local BTS Database Query" section for the steps necessary for the LNP feature to be offered in the European market.
Office Provisioning
Step 1
add feature fname=LNP; tdp1=COLLECTED_INFORMATION; tid1=LNP_TRIGGER; ttype1=R; description=local number portability; feature_server_id=FSAIN205;Step 2
add/change service id=999; fname1=LNP;add ca-config type=DEFAULT-OFFICE-SERVICE-ID; DATATYPE-STRING; VALUE=999;Step 3
add ported-office-code digits-string=NPA-NXX;Step 4
change pop id=1; my-lrn=NPA-NXX-XXXX; JIP=NPA;Step 5
dn2subscriber.LNP_TRIGGERdn2subscriber.statustrunk-grp.signal-ported-numbertrunk-grp.remote-switch-lrn
Provisioning Resources
Step 1
add sg id=sg_1; description=signaling gateway 1;Step 2
add sg-grp id=sg_grp1; sg1-id=sg_1; description=signaling gateway group 1;Step 3
add sgp id=itp_7507_1; sg-id=sg_1; description=ITP 7507 for sg_1;Step 4
add sctp-assoc-profile id=sctp_prof; bundle_timeout=500; max_assoc_retrans=5; max_path_retrans=5; max_rto=6000; min_rto=301; sack_timeout=101; hb_timeout=1000;
Note
Step 5
add sctp-assoc id=sctp_assoc1; sgp-id=itp_7507_1; sctp-assoc-profile-id=sctp_prof; remote_port=14001; remote_tsap_addr1=10.89.232.9; remote_tsap_addr2=10.89.233.41; local_rcvwin=64000; max_init_retrans=5; max_init_rto=1000; platform_id=FSAIN205;Step 6
add dpc id=stp1; point-code=1-101-0; description=STP1, MGTS STP;Step 7
add sccp-nw id=1; net-ind=NATIONAL; SUB_SVC=NATIONAL; HOP-Count=10;Step 8
add subsystem-grp id=SSN_LNP; PLATFORM_ID=FSAIN205; TCAP_VERSION=ANS92;Step 9
add subsystem id=SSN_LNP; opc_id=opc; local-ssn=247; remote-ssn=247; sccp-nw-id=1; SCCP_VERSION=ANS92; APPLICATION_VERSION=AIN01;Step 10
add routing-key id=rk_lnp; opc-id=opc; sg-grp-id=sg_grp; si=SCCP; rc=202; PLATFORM_ID=FSAIN205; ssn-id=SSN_LNP;Step 11
add sccp-route opc_id=opc; dpc_id=stp1; rk_id=rk_lnp;subsystem_grp_id=SSN_LNP;Step 12
add slhr-profile id=slhr_lnp;Step 13
add slhr id=slhr_lnp; opc_id=opc; dpc_id=stp1; rk_id=rk_lnp; ssn-id=SSN_LNP; gtt-req=Y; tt=11; GTT_ADDR_TYPE=CDPN; GTT_ADDR=3;Step 14
Add ca-config type=DEFAULT-LNP-SLHR-ID; datatype=string; value=slhr_lnp;Step 15
Add ca-config type=SCP-RESPONSE-TIMER; datatype=integer; value=3;Step 16
control sctp-assoc id=sctp_assoc1; mode=FORCED; target-state=INS;Step 17
control subsystem-grp id=SSN_LNP; mode=FORCED; target-state=UIS;
Subscriber Provisioning
Step 1 below shows the LNP-TRIGGER usage during the porting transition. At the start of the porting process, the subscriber status remains assigned, and the LNP-TRIGGER indication will cause an LNP query. If the SCP database query result indicates that the porting has not occurred yet (no LRN is received), then the call is routed locally to the subscriber. Otherwise, if the SCP returns the LRN of another switch, the porting has occurred, and the call is routed onward to the recipient switch using the LRN.
Note
Step 2 shows the marking of a subscriber's DN as ported-out of this donor switch. After an LNP query, the call should be routed to the recipient switch using the Location Routing Number (LRN).
Step 1
change dn2subscriber dn=1522; office-code-index=15; lnp-trigger=Y;Step 2
change dn2subscriber dn=1522; office-code-index=15; status=ported-out;
Provisioning Notes/Caveats
•
•
•
•
Local Number Portability for ITU Local BTS Database Query
In ITU/European markets, the LNP feature performs a query of an internal Cisco BTS 10200 Softswitch database. Since an external SS7 TCAP query is not needed, SIGTRAN provisioning is not required. The following subsections identify necessary steps for the LNP feature to be offered in European markets.
Office Provisioning
Step 1
add/change feature fname=LNP; tdp1=COLLECTED_INFORMATION; tid1=LNP_TRIGGER; ttype1=R;description=local number portability;feature_server_id=FSAIN205;Step 2
add/change service id=999; fname1=LNP;add ca-config type=DEFAULT-OFFICE-SERVICE-ID; datatype=string; value=999;Step 3
a.
add lnp-profile id=lnp_rn_acq; all-call-query=Y; external-lnp-db=n; internal-lnp-db=Y; lnp-db-type=RN; rn-signaling-method=prefix-method;b.
add lnp-profile id=lnp_rn_qor; query-on-release=Y; external-lnp-db=n; internal-lnp-db=Y; lnp-db-type=RN; rn-signaling-method=prefix-method; release-cause=14;c.
add lnp-profile id=lnp_rn_acq_qor; all-call-query=Y; query-on-release=Y; external-lnp-db=n; internal-lnp-db=Y; np-db-type=RN; rn-signaling-method=prefix-method; release cause=14;d.
add lnp-profile id=lnp_rn_odbr; onward-call-routing=Y; external-lnp-db=n; internal-lnp-db=Y; lnp-db-type=RN; rn-signaling-method=prefix-method;Step 4
add/change ca-config type=DEFAULT-LNP-PROFILE-ID;DATATYPE=STRING; value=lnp_rn_acq_qor;Subscriber Provisioning
The following sequence shows the marking of a subscriber's DN as ported-out of this donor switch. After an LNP query, the call should be routed to the recipient switch using the Routing Number (RN).
Step 1
control subscriber-termination id=sub1; mode=graceful; target-state=oos;Step 2
delete subscriber id=sub1;Step 3
Note
change dn2subscriber dn=1522; office-code-index=15; status=ported-out;
NOA Routing and Dial Plan Provisioning
Although it is not customary to include basic dial plan and related provisioning in this document, it must be understood to understand the provisioning of Local LNP for ITU/Europe.
The following example shows selected commands for the following scenario:
A subscriber's dial-plan-profile has a noa-route-profile specified, pointing to a destination, which in turn points to an "RN dial-plan", used to route the call using the Routing Number (RN) prefix.
The digit translation flow for a Called Party Number with NoA=8 (ported number with routing number contatenated with directory number) is as follows (note, the objects are added in reverse order in the provisioning example):
subscriber/trunk dial-plan "dp_sub_itu" -> noa-route "noa_rt" -> destination "dummy_rn_itu" -> RN dial-plan "dp_rn_itu" -> destination "dest_rn_sub_itu"
Example commands are included in the table below:
Step 1
add digman-profile id=dm_dpp_rn; description=digman for RN dial-plan-profile after NOA Routing (ITU);Step 2
add digman id=dm_dpp_rn; rule=1; match-string=^4001; match-noa=PORTED_NUMBER_WITH_RN; replace-string=none; replace-noa=UNKNOWN;Step 3
add dial-plan-profile id=dp_rn_itu; description=RN dial plan (ITU); nanp-dial-plan=N;noa-based-routing=N;
Note
Step 4
change dial-plan-profile id=dp_rn_itu; dnis-digman-id=dm_dpp_rn;Step 5
add destination dest-id=dest_sub_itu; call-type=LOCAL; route-type=SUB; ani-digman-id=dm_dest_sub_ani; dnis-digman-id=dm_dest_rn; acq-lnp-query=PERFORM-LNP-QUERY;description=ITU Sub dest: Allow LNP query;Step 6
add destination dest-id=dest_sub_rn_itu; call-type=LOCAL; route-type=SUB; ani-digman-id=dm_dest_sub_ani; acq-lnp-query=NO-LNP-QUERY;description=ITU Sub dest after RN routing: do not allow LNP query;Step 7
add destination dest-id=dummy_rn_itu; call-type=LOCAL; route-type=DP; dial-plan-id=dp_rn_itu; description=dummy destination used for NOA Routing to point to RN dial-plan;Step 8
add dial-plan id=dp_rn_itu; digit-string=1150; noa=UNKNOWN; min-digits=8; max-digits=8; dest-id=dest_sub_rn_itu;Step 9
add dial-plan id=dp_rn_itu; digit-string=17023001; noa=UNKNOWN; min-digits=8;max-digits=8; dest-id=dest_sub_rn_itu;Step 10
add ndc digit-string=1;Step 11
add exchange-code ec=150; ndc=1; max-dn-length=8; min-dn-length=8; office-code-index=15;Step 12
add office-code call-agent-id=CA146; ndc=1; ec=150; dn-group=1xxx;Step 13
add exchange-code ec=702; ndc=1; max-dn-length=8; min-dn-length=8; office-code-index=5;Step 14
add office-code call-agent-id=CA146; ndc=1; ec=702; dn-group=3xxx;Step 15
add dial-plan-profile id=dp_sub_itu; ani-digman-id=dm_dpp_ani_itu;dnis-digman-id=dm_dpp_sub_dnis; nanp-dial-plan=N; description=Subscriber Local dial-plan (ITU);Step 16
add dial-plan id=dp_sub_itu; digit-string=1150; min-digits=8; max-digits=8; noa=UNKNOWN; dest-id=dest_sub_itu;Step 17
add noa-route-profile id=noa_rt; description=NOA Route profile (ITU) to RN dial-plan;Step 18
add noa-route id=noa_rt; noa=PORTED_NUMBER_WITH_RN; dest-id=dummy_rn_itu;Step 19
change dial-plan-profile id=dp_sub_itu; noa-based-routing=Y; noa-route-profile-id=noa_rt;Step 20
add dn2rn dn=17023001; rn=4001;Step 21
add dn2rn dn=11501522; rn=4101;Step 22
control subscriber-termination id=sub1; mode=graceful; target-state=oos;Step 23
delete subscriber id=sub1;Step 24
Note
change dn2subscriber dn=1522; office-code-index=15; status=ported-out;
Allow ACQ or QoR Query on Incoming Trunk Calls
Usually, LNP queries for ACQ or QoR occur on the originating switch, in the originating network. However, in some cases the originating switch does not perform LNP queries, for example:
•
•
•
The following example shows how to allow queries on incoming calls for a particular trunk group.
Step 1
change trunk-grp id=1; perform-lnp-query=Y;
Destination and Call Type ACQ Control
If desired, an All Calls Query (ACQ) can be selectively controlled in the destination obtained as a result of digit translation. In some cases, ACQ is desired for 100% of call originations, in which case all destinations may have ACQ-LNP-QUERY=PERFORM-LNP-QUERY, or NA. The NA value, meaning not applicable, indicates that either LNP is not applicable on this destination or that the destination should not be used as criteria on whether to perform an ACQ LNP query. LNP Profile and trunk group values will determine whether a query is performed or not.
For countries where two or more LNP queries are necessary, destinations with ACQ-LNP-QUERY=PERFORM-LNP-QUERY will allow the second query. For example, in Denmark an incoming call with NoA=112 and called party number contain a DN only requires another query, so destinations reached via NOA Routing for NOA=PORTED-NUMBER-WITHOUT-RN should allow have PERFORM-LNP-QUERY value. Likewise, in Sweden, a call with NoA=8 and a partial RN (indicating operator, but not identifying the exact recipient switch), uses a dial-plan entry with the partial RN (of this network) to select a destination with PERFORM-LNP-QUERY to force a second query for a call entering the recipient network.
ACQ-LNP-QUERY=NO-LNP-QUERY will prevent an ACQ query from being performed on this call. This may be used for certain calls for which a query should never be performed (e.g., outgoing calls to a carrier), or after an LNP query has been performed (on this switch, or another), such that NOA Routing and the RN dial-plan select destinations with NO-LNP-QUERY to prevent a second (unnecessary) query.
ACQ-LNP-QUERY=ACQ-BASED-ON-CALL-TYPE will use the call type table entry to determine whether a query will be performed (see examples below).
The destination ACQ criteria in this section only affects All Calls Query (ACQ). These values have no effect on decision criteria for ODBR or QoR queries.
The following examples demonstrate control over ACQ queries using the Destination table:
•
change destination dest-id=dest_sub_itu; ACQ-LNP-QUERY=NA;•
change destination dest-id=dest_sub_itu; ACQ-LNP-QUERY=PERFORM-LNP-QUERY;•
change destination dest-id=dest_sub_itu; ACQ-LNP-QUERY=NO-LNP-QUERY;In the following example, the destination defers to the call type entry for the LNP ACQ decision:
Step 1
change destination dest-id=dest_sub_itu; call-type=PREMIUM; ACQ-LNP-QUERY=ACQ-BASED-ON-CALL-TYPE;Step 2
•
•
add call-type-profile call-type=PREMIUM; lnp-query=N;•
add/change call-type-profile call-type=PREMIUM; lnp-query=Y;Outgoing Carrier Call LNP ACQ Query Control
Some operators may prefer to NOT perform ACQ LNP queries on subscriber originated outbound calls to a carrier, or alternatively, may desire to allow queries on all, or speficied, carrier calls. Outgoing carrier calls may be dialed explicitly by dialing a digit prefix which translates via the dial plan to a destination with route-type=carrier and a carrier ID specified. Or, for a destination with call-type of intralata or interlata, the default carrier from the calling party's subscriber table entry may be used (PIC1 or PIC2).
Regardless of the method for determining the carrier (and its associated carrier data), for an LNP ACQ query to be performed on a outbound carrier call, the destination arrived at via the dial plan translation must allow a query. If a query is allowed in the destination table (ACQ-LNP-QUERY=PERFORM-LNP-QUERY or NA, or ACQ-BASED-ON-CALL-TYPE with call-type table LNP-QUERY=Y), then the applicable carrier table is used to further determine whether a query is allowed or not.
If the carrier indicates USE-DIAL-PLAN=Y, then the carrier entry is not used as criteria for an LNP query. Otherwise, if USE-DIAL-PLAN=N, then the carrier entry LNP-QUERY=Y/N is used to determine whether or not a query is allowed on the carrier call. Note that , for an ACQ query to be allowed, ACQ must be allowed at all levels, including the LNP Profile table ALL-CALL-QUERY=Y, incoming trunk group PERFORM-LNP-QUERY=Y (if it is an incoming trunk call), destination, and carrier (if applicable, as described above).
Note
Provisioning Notes/Caveats
•
•
•
•
•
•
•
•
•
•
Multi-Line Hunt Group
Multi-line Hunt Group (MLHG) is a telecommunications channel between two points, such as a telephone company CO/switching center and a call center, PBX, or key system. Typically, a business has more stations (telephones) than lines, and hunting features allow sharing of a group of lines by many individual stations for both incoming and outgoing calls. A hunt group is a series of lines organized in such a way that if the first line is busy, the next line is hunted, and so on, until a free line is found. This arrangement is often used on a group of incoming lines.
Tip
See Centrex, MLHG, and Voicemail Provisioning, page 8-1, for directions for provisioning a MLHG.
Multiline Variety Package
This section describes the various provisioning steps along with examples that need to be followed to provision the MVP feature for a group of subscribers. The BTS 10200 uses a custom dial-plan for provisioning the MVP feature for group of subscribers. This custom dial-plan can be shared by all MVP groups (that is, by subscribers that belong to different MVP groups).
Step 1
a.
add custom_dial_plan_profile id=MVPcdp;b.
add cdp id=MVPcdp; digit_string=xxxxxxx; nod=MVP_POTS_ACCESS;c.
add cdp id=MVPcdp; digit_string=*52; nod=VSC; fname=CHDadd cdp id=MVPcdp; digit_string=*58; nod=VSC; fname=CPRKadd cdp id=MVPcdp; digit_string=*59; nod=VSC; fname=CPRK_RETd.
add cdp id=MVPcdp; digit_string=*2; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*3; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*4; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*5; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*6; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*7; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*8; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*9; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*2x; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*3x; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*4x; nod=EXTENSION;add cdp id=MVPcdp; digit_string=*0; nod=ATTENDANT-ACCESS;
Note
Step 2
add digit_map id=digit-map; description=Digit Map for MVP subscribers; digit_pattern==0T|00|[2-9]11|[2-9]xx[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|0[2-9]xx[2-9]xxxxxx|01 1xxxxxx.T|101xxxx|#|*[2-9]x|11xx|[2-9]#|[2-4]x#|[2-9]T|[2-4]xT|01[2-9]xxxxx.T|*0.
Note
Step 3
add subscriber_profile id=SubProfile; digit_map_id=digit-map;dial_plan_id=PSTN DIAL-PLAN;Step 4
add subscriber id=MainSubMVPgrp1; sub-profile-id=SubProfile;add centrex_grp id=MVPgrp1; cdp_id=MVPcdp; call_agent_id=CA146 main_sub_id=MainSubMVPgrp1;add cpsg id=MVPgrp1; ctxg_id=MVPgrp1; CPRK-FDN=12345
Note
Step 5
a.
change subscriber id=SubA; sub_profile_id=SubProfile category=CTXG_INDIVIDUAL; ctxg_id=MVPgrp1;change subscriber id=SubB; sub_profile_id=SubProfile category=CTXG_INDIVIDUAL; ctxg_id=MVPgrp1;change subscriber id=SubC; sub_profile_id=SubProfile category=CTXG_INDIVIDUAL; ctxg_id=MVPgrp1;b.
add ext2subscriber ext=*4001; sub_id=SubA; ctxg_id=MVPgrp1; cpsg_id=MVPgrp1;add ext2subscriber;ext=*4002; sub_id=SubB; ctxg_id=MVPgrp1; cpsg_id=MVPgrp1;add ext2subscriber ext=*4003; sub_id=SubC; ctxg_id=MVPgrp1; cpsg_id=MVPgrp1;Multi-Lingual Support for Interactive Voice Response and Announcements
The Multi-Lingual Support (MLS) for Interactive Voice Response (IVR) and Announcements feature allows subscribers to choose which language (English, French, Spanish) to hear.
The following subsections identify the necessary steps to provision the MLS for IVR and announcements feature.
Office Provisioning
Step 1
add feature fname=MLS; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype=R; feature_server_id=FSPTC325Step 2
add service id=mls; fname1=MLS;Step 3
add vsc digit-string=*56; fname=MLS;
Provisioning Resources
Step 1
add mgw-profile id=ms_profile; vendor=Cisco; silent-supress-supp=N; rbk-on-conn-supp=N; packet-type=IP; AAL1=N; AAL2=N; AAL5=N; PVC=N; SVC=N; SPVC=N; EC=N; SDP-ORIGFIELD-SUPP=N; SDP-SESSNAME-SUPP=N; SDP-EMAIL-SUPP=N; SDP-PHONE-SUPP=N; SDP-URI-SUPP=N; SDP-BANDWIDTH-SUPP=N; SDP-INFO-SUPP=N; SDP-TIME-SUPP=N; SDP-ATTRIB-SUPP=N; MGCP-ERQNT-SUPP=N; MGCP-HAIRPIN-SUPP=N; MGCP-3WAY-HSHAKE-SUPP=Y; MGCP-CONN-ID-AT-GW-SUPP=Y; MGCP-CMD-SEQ-SUPP=N; MGCP-VMWI-SUPP=N; TERMINATION-PREFIX=ann/; PORT-START=0; MGCP-VERSION=MGCP_1_0; MGCP-RSVP-SUPP=N;Step 2
add mgw id=ipunity_ms; tsap-addr=<ip addr of MS MGCP>; call-agent-id=CA166; mgw-profile-id=ms_profile; rgw=n; tgw=y; call-agent-control-port=0; ans=n; ivr=y; nas=n; pbx=n;Step 3
add/change annc-tg-profile; id=annc_tg_p; annc=N; ivr=Y; auto_answer=Y;Step 4
add termination prefix=annc/; port-start=0; port-end=30; type=trunk; mgw-id=ipunity_ms;Step 5
add trunk-grp id=1; call-agent-id=CA146; tg_typeannc; mgw-id=ipunity_ms; tg-profile-id=annc_tg_p; mgcp-pkg-type=AUDIO;Step 6
add trunk cic-start=1; ; cic-end=30; tgn-id=1; termination-prefix=ann/; termination-port-start=0; termination-port-end=29; mgw-id=ipunity_ms;Step 7
add route id=rt_annc; tgn1-id=1; tg-selection=LCR;Step 8
add route-guide id=rg_annc; policy-type=ROUTE; policy-id=rt annc;Step 9
add ivr-script-profile fname=MLS; ivr-access-mode=ivr; ivr-route-guide-id=ivr_rg; ivr-script-pkg-type=BAU;
Announcement Provisioning
Step 1
add language id=def;Step 2
add language id=eng; announcement-file-prefix=eng_; announcement-number-prefix=1; add language id=fra; announcement-file-prefix=fra_; announcement-number-prefix=2; add language id=spa; announcement-file-prefix=spa_; announcement-number-prefix=3;Step 3
add audio-segment; id=WELCOME; type=PHYSICAL; url=file://welcome.wav; description=Welcome;add-audio-segment; id=YouAreAbout; type=PHYSICAL; url=file://YouAreAbout.wav; description=You are about to change your language of choice;add audio-segment; id=FOR; type=PHYSICAL; url=file://for.wav; description=For;add audio-segment; id=ENGLISH; type=PHYSICAL; url=file://english.wav; description=English;add audio-segment; id=PRESS; type=PHYSICAL; url=file://Press.wav; description=Press;add audio-segment; id=SPANISH; type=PHYSICAL; url=file://spanish.wav; description=Spanish;add audio-segment; id=FRENCH; type=PHYSICAL; url=file://french.wav; description=French;add audio-segment; id=var_audio; type=VARIABLE; var-type=str; description=audio file;add audio-segment; id=YouHaveSelected; type=PHYSICAL; url=file://YouHaveSelected.wav; description=You have selected;add audio-segment; id=AsYourLanguageOfChoice; type=PHYSICAL; url=file://AsYourLanguageOfChoice.wav; description=As your language of choice;add audio-segment; id=ToConfirm; type=PHYSICAL; url=file://ToConfirmYourChoice.wav; description=To confirm your choice;add audio-segment; id=ToExit; type=PHYSICAL; url=file://ToCancelWithoutSaving.wav; description=To cancel without saving;add audio-segment; id=YourLanguageOfChoice; type=PHYSICAL; url=file://yourlanguageofchoiceisnow.wav; description=Your language of choice is now;add audio-segment; id=var_digits; type=VARIABLE; var-type=dig; var-subtype=gen; description=string;add audio-segment; id=var_sign; type=VARIABLE; var-type=str; description=sign(*,#);add audio-segment; id=var_number; type=VARIABLE; var-type=num; var-subtype=crd; description=number;add audio-segment; id=var_time; type=VARIABLE; var-type=tme; var-subtype=t24; description=time;add audio-segment; id=var_day; type=VARIABLE; var-type=wkd; description=weekday;add audio-segment; id=var_audio; type=VARIABLE; var-type=str; description=audio file;Step 4
add audio_seq id=MLS_WELCOME;language_id=def; seq=WELCOME,YouAreAbout,FOR,ENGLISH,PRESS,var_digits,FOR,SPANISH,PRESS,var_digits,FOR, FRENCH,PRESS,var_digits; description=Welcome. You are about to change your language of choice. For English press <d>. For Spanish press <d>. For French, press <d>.add audio_seq id=MLS_RECONFIRM;language_id=def; seq=YouHaveSelected,var_audio,AsYourLanguageOfChoice,ToConfirm,PRESS,var_digits,ToExit, PRESS,var_digits; description=You have selected <lang> as your language of choice. To confirm your choice, press <d>. To cancel without saving, press <d>.add audio_seq id=MLS_RELEASE;language_id=def; seq=YourLanguageChoice,var_audio; description=Your language of choice is now <lang>.Step 5
add feature-config; fname=MLS; type=RESTART-KEY; datatype=string; value=*;add feature-config; fname=MLS; type=RETURN-KEY; datatype=string; value=#;add feature-config; fname=MLS; type=FDT-TIMER; datatype=integer; value=50;add feature-config; fname=MLS; type=NUM-ATTEMPTS; datatype=integer; value=3; description=number of attempts;
Subscriber Provisioning
The following steps detail how to add a subscriber for the MLS feature.
Step 1
add subscriber id=sub_1; sub-profile-id=subprof_1; DN1=4692550260; language-id=spa;Step 2
add subscriber-service-profile sub_id=sub_1; service-id=mls;
Centrex Provisioning
For this feature, Centrex subscriber provisioning is similar to the provisioning of a POTS subscriber.
MLHG Provisioning
For this feature, MLHG provisioning is similar to subscriber provisioning.
Multiple Directory Number
The Multiple Directory Number (MDN) feature allows 5 or more directory numbers (DN) to be assigned to your single telephone line. Each individual DN is recognized using a special alerting pattern. One DN is designated as a primary DN during subscription.
Tip
Note
The following subsections identify necessary steps for the MDN feature to be offered.
Office Provisioning
Step 1
add feature FNAME=MDN; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=MDN;Step 2
add service id=1; FNAME1=MDN;
Subscriber Provisioning
Step 1
add subscriber data sub_id = subscriber_1 fdn=4692553008; ring_type = 1; cwt_type=1;Step 2
add subscriber-service-profile sub_id=subscriber_1; service-id=1;Step 3
ADD DN2SUBSCRIBER SUB_ID=SUBSCRIBER_1; FDN=4692550009; RING_TYPE=2; CWT_TYPE=2;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber.
MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
One of the three FDN values assigned in sub-feature-data must be the subscriber's primary DN.
If the number of DNs is less than the number of available ring or call waiting tones, be sure the tone for the primary DN is different from the secondary DN tone during configuration.
No Solicitation Announcement
The NSA feature allows subscribers to play a message telling callers that they do not accept solicitation (telemarketing) calls. The feature does not forcibly release the call, but the expectation is that any solicitation caller will hang up.
Tip
The following subsections identify necessary steps for the feature to be offered.
Office Provisioning
Step 1
add feature fname=NSA_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325;Step 2
add feature fname=NSA; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC325; FNAME1=NSA_ACT;Step 3
add vsc fname=NSA_ACT; DIGIT_STRING=*94;Step 4
add cdp id=cdp1; fname=NSA_ACT; DIGIT_STRING=*94; nod=VSC; CAT_STRING=1111111111111111;Step 5
add feature fname=SLE;Step 6
add service id=nsa; fname1=NSA;Step 7
add ca-config type=SLE-LIST-SIZE; datatype=INTEGER; value=25;
Provisioning Resources
This section explains how to provision the interface to the IVR server, the IVR announcement trunks, and route to the IVR server for the NSA feature.
Step 1
add mgw-profile ID=ms_profile; VENDOR=Cisco; SILENT-SUPPRESS-SUPP=N; RBK-ON-CONN-SUPP=N; PACKET-TYPE=IP; AAL1=N; AAL2=N; AAL5=N; PVC=N; SVC=N; SPVC=N; EC=N; SDP-ORIGFIELD-SUPP=N; SDP-SESSNAME-SUPP=N; SDP-EMAIL-SUPP=N; SDP-PHONE-SUPP=N; SDP-URI-SUPP=N; SDP-BANDWIDTH-SUPP=N; SDP-INFO-SUPP=N; SDP-TIME-SUPP=N; SDP-ATTRIB-SUPP=N; MGCP-ERQNT-SUPP=N; MGCP-HAIRPIN-SUPP=N; MGCP-QLOOP-SUPP=N; MGCP-3WAY-HSHAKE-SUPP=Y; MGCP-CONN-ID-AT-GW-SUPP=Y; MGCP-CMD-SEQ-SUPP=N; MGCP-VMWI-SUPP=N; TERMINATION-PREFIX=ann/; PORT-START=0; MGCP-VERSION=MGCP_1_0; MGCP-RSVP-SUPP=N;
Note
Step 2
add mgw id=ipunity_ms; tsap-addr=<ip addr of MS MGCP>; call-agent-id=CA166; mgw-profile-id=ms_profile; rgw=n; tgw=y; call-agent-control-port=0; ans=n; ivr=y; nas=n; pbx=n;Step 3
add annc-tg-profile id=annc_tg_p; annc=N; ivr=Y; auto_answer=Y;Step 4
add termination prefix=ann/; port-start=0; port-end=30; type=trunk; mgw-id=ipunity_ms;Step 5
add trunk-grp id=1; call-agent-id=CA146; tg_type=annc; mgw-id=ipunity_ms; tg-profile-id=annc_tg_p; mgcp-pkg-type=AUDIO;Step 6
add trunk cic-start=1; cic-end=30; tgn-id=1; termination-prefix=ann/; termination-port-start=0; termination-port-end=29; mgw-id=ipunity_ms;Step 7
add route id=rt_annc; tgn1-id=1; tg-selection=LCR;Step 8
add route id=rt_annc; tgn1-id=1; tg-selection=LCR;Step 9
add ivr-script-profile FNAME=NSA; IVR_ACCESS_MODE=IVR; IVR_ROUTE_GUIDE_ID=ivr_rg; IVR_SCRIPT_PKG_TYPE=BAU;add ivr-script-profile FNAME=NSA_ACT; IVR_ACCESS_MODE=IVR; IVR_ROUTE_GUIDE_ID=ivr_rg; IVR_SCRIPT_PKG_TYPE=BAU;Step 10
control trunk-termination tgn-id=20; cic=all; mode=forced; target-state=OOS;unequip trunk-termination tgn-id=20; cic=all;control trunk-grp id=20; mode=forced; target-state=OOS;control mgw id=ipunity_ms; mode=forced; target-state=OOS;Step 11
control mgw id=ipunity_ms; mode=forced; target-state=INS;control trunk-grp id=20; mode=forced; target-state=INS;equip trunk-termination tgn-id=20; cic=all;control trunk-termination tgn-id=20; cic=all; mode=forced; target-state=INS;Step 12
status mgw id=ipunity_ms;status trunk-grp id=20;status tt tgn-id=20; cic=all;
Announcement Provisioning
This section explains how to specify the audio segments and audio sequences played by the IVR server.
Step 1
add language id=def;Step 2
add audio-segment; id=NSA; type=PHYSICAL; url=file://nsa.wav; description=No Solicitation;add audio-segment; id=AGAIN; type=PHYSICAL; url=file://again.wav; description=againadd audio-segment; id=ANONYMOUS;type=PHYSICAL; url=file://anonymous.wav; description=anonymous;add audio-segment; id=ARE; type=PHYSICAL; url=file://are.wav; description=are;add audio-segment; id=DIAL; type=PHYSICAL; url=file://dial.wav; description=dial;add audio-segment; id=ENTRIES; type=PHYSICAL; url=file://entries.wav; description=entries;add audio-segment; id=ENTRY; type=PHYSICAL; url=file://entry.wav; description=entry;add audio-segment; id=EXTENSION; type=PHYSICAL; url=file://extension.wav; description=extension;add audio-segment; id=FROM; type=PHYSICAL; url=file://from.wav; description=from;add audio-segment; id=INCLUDING; type=PHYSICAL; url=file://including.wav; description=including;add audio-segment; id=IS; type=PHYSICAL; url=file://is.wav; description=is;add audio-segment; id=NEXT; type=PHYSICAL; url=file://next.wav; description=next;add audio-segment; id=NO; type=PHYSICAL; url=file://no.wav; description=no;add audio-segment; id=OFF; type=PHYSICAL; url=file://off.wav; description=off;add audio-segment; id=ON; type=PHYSICAL; url=file://on.wav; description=on;add audio-segment; id=REPEATING; type=PHYSICAL; url=file://repeating.wav; description=repeating;add audio-segment; id=THERE; type=PHYSICAL; url=file://there.wav; description=there;add audio-segment; id=TO; type=PHYSICAL; url=file://to.wav; description=to;add audio-segment; id=WILDCARD; type=PHYSICAL; url=file://wildcard.wav; description=wildcard;add audio-segment; id=YOUR; type=PHYSICAL; url=file://your.wav; description=Your;Step 3
add audio-segment; id=NSA_1; type=PHYSICAL; url=file://nsa_1.wav; description=You have reached a number that does not accept solicitations. If you are a solicitor, please add this number to your do-not-call list and hang up now. Otherwise, press;add audio-segment; id=NSA_2; type=PHYSICAL; url=file://nsa_2.wav; description=or stay on the line;add audio-segment; id=var_digits; type=VARIABLE; var-type=dig; var-subtype=gen; description=string;add audio-segment; id=var_sign; type=VARIABLE; var-type=str; description=sign(*,#);add audio-segment; id=var_number; type=VARIABLE; var-type=num; var-subtype=crd; description=number;add audio-segment; id=var_time; type=VARIABLE; var-type=tme; var-subtype=t24; description=time;add audio-segment; id=var_day; type=VARIABLE; var-type=wkd; description=weekday;add audio-segment; id=var_audio; type=VARIABLE; var-type=str; description=audio file;Step 4
add audio-segment; id=AUTH_1; type=PHYSICAL; url=file://auth_1.wav; description=Please enter your password now;add audio-segment; id=AUTH_2; type=PHYSICAL; url=file://auth_2.wav; description=We are sorry, the password you entered is incorrect. Please hang up and try your call later;add audio-segment; id=AUTH_3; type=PHYSICAL; url=file://auth_3.wav; description=You must now change your password. Please enter a new password nowadd audio-segment; id=AUTH_4; type=PHYSICAL; url=file://auth_4.wav; description=Your password has been changed toadd audio-segment; id=AUTH_5; type=PHYSICAL; url=file://auth_5.wav; description=If you are satisfied with this password please pressadd audio-segment; id=AUTH_6; type=PHYSICAL; url=file://auth_6.wav; description=now. To reenter the password, please pressadd audio-segment; id=AUTH_7; type=PHYSICAL; url=file://auth_7.wav; description=Press <d> to reset your password or dialStep 5
add audio-segment; id=SLE_1_1; type=PHYSICAL; url=file://sle_1_1.wav; description=service is currently;add audio-segment; id=SLE_1_2; type=PHYSICAL; url=file://sle_1_2.wav; description=on your list;add audio-segment; id=SLE_1_3; type=PHYSICAL; url=file://sle_1_3.wav; description=You may dial during the announcements for faster service. When you have finished, hang up;add audio-segment; id=SLE_3_1; type=PHYSICAL; url=file://sle_3_1.wav; description=To turn this service;add audio-segment; id=SLE_3_2; type=PHYSICAL; url=file://sle_3_2.wav; description=To add an entry, pressadd audio-segment; id=SLE_3_3; type=PHYSICAL; url=file://sle_3_3.wav; description=To remove one or more entries, pressadd audio-segment; id=SLE_3_4; type=PHYSICAL; url=file://sle_3_4.wav; description=To hear the entries on your list, pressadd audio-segment; id=SLE_3_5; type=PHYSICAL; url=file://sle_3_5.wav; description=To hear these instructions repeated, dialadd audio-segment; id=SLE_3_6; type=PHYSICAL; url=file://sle_3_6.wav; description=Please dial now.add audio-segment; id=SLE_7; type=PHYSICAL; url=file://sle_7.wav; description=We are sorry. The number you have dialed is incorrect;add audio-segment; id=SLE_8; type=PHYSICAL; url=file://sle_8.wav; description=We are sorry, the digits dialed are not a valid command;add audio-segment; id=SLE_11_1; type=PHYSICAL; url=file://sle_11_1.wav; description=service is now;add audio-segment; id=SLE_11_2; type=PHYSICAL; url=file://sle_11_2.wav; description=Please continue, dial;add audio-segment; id=SLE_11_3; type=PHYSICAL; url=file://sle_11_3.wav; description=for instructions or hang up;add audio-segment; id=SLE_13_1; type=PHYSICAL; url=file://sle_13_1.wav; description=To turn on this service, you must add an entry to your list. To add an entry, please press;add audio-segment; id=SLE_13_2; type=PHYSICAL; url=file://sle_13_2.wav; description=If you wish to hear this announcement repeated, please dial;add audio-segment; id=SLE_14_1; type=PHYSICAL; url=file://sle_14_1.wav; description=Dial the number to be added, then press;add audio-segment; id=SLE_14_2; type=PHYSICAL; url=file://sle_14_2.wav; description=To add the last calling party, press;add audio-segment; id=SLE_14_3; type=PHYSICAL; url=file://sle_14_3.wav; description=then press theadd audio-segment; id=SLE_14_4; type=PHYSICAL; url=file://sle_14_4.wav; description=To add an extension, pressadd audio-segment; id=SLE_14_5; type=PHYSICAL; url=file://sle_14_5.wav; description=To add a wildcard, pressadd audio-segment; id=SLE_15_1; type=PHYSICAL; url=file://sle_15_1.wav; description=Dial the number to be removed, then pressadd audio-segment; id=SLE_15_2; type=PHYSICAL; url=file://sle_15_2.wav; description=To remove all entries, dialadd audio-segment; id=SLE_15_3; type=PHYSICAL; url=file://sle_15_3.wav; description=To remove just the anonymous entries, dialadd audio-segment; id=SLE_15_4; type=PHYSICAL; url=file://sle_15_4.wav; description=To remove an extension, pressadd audio-segment; id=SLE_15_5; type=PHYSICAL; url=file://sle_15_5.wav; description=To remove a wildcard, pressadd audio-segment; id=SLE_16_1; type=PHYSICAL; url=file://sle_16_1.wav; description=We are sorry. The number of the last calling party is not available;add audio-segment; id=SLE_16_2; type=PHYSICAL; url=file://sle_16_2.wav; description=Please start again, or dial;add audio-segment; id=SLE_16_3; type=PHYSICAL; url=file://sle_16_3.wav; description=for instructions;add audio-segment; id=SLE_17; type=PHYSICAL; url=file://sle_17.wav; description=The number you have added is an anonymous entry;add audio-segment; id=SLE_18; type=PHYSICAL; url=file://sle_18.wav; description=The number you have added is;add audio-segment; id=SLE_19; type=PHYSICAL; url=file://sle_19_1.wav; description=We are sorry. Your list is full. You must remove an entry before adding another. Please try other options or dial;add audio-segment; id=SLE_20_1; type=PHYSICAL; url=file://sle_20_1.wav; description=We are sorry. Please try adding the number in a few minutes;add audio-segment; id=SLE_20_2; type=PHYSICAL; url=file://sle_20_2.wav; description=Please continue or dial;add audio-segment; id=SLE_21_1; type=PHYSICAL; url=file://sle_21_1.wav; description=We are sorry. The number you have dialed is not a valid number. Please try again later.;add audio-segment; id=SLE_22; type=PHYSICAL; url=file://sle_22.wav; description=We are sorry. There are no entries on your list. Please try other options or dialadd audio-segment; id=SLE_23; type=PHYSICAL; url=file://sle_23.wav; description=The number you have removed is an anonymous entry;add audio-segment; id=SLE_24; type=PHYSICAL; url=file://sle_24.wav; description=The number you have removed is;add audio-segment; id=SLE_25; type=PHYSICAL; url=file://sle_25.wav; description=There are no more entries on your list. Please continue, dial;add audio-segment; id=SLE_26; type=PHYSICAL; url=file://sle_26.wav; description=There are no more anonymous entries on your list. Please continue, dial;add audio-segment; id=SLE_27; type=PHYSICAL; url=file://sle_27.wav; description=on your list. Please try other options, or dial;add audio-segment; id=SLE_28_1; type=PHYSICAL; url=file://sle_28_1.wav; description=To delete an entry, dialadd audio-segment; id=SLE_28_2; type=PHYSICAL; url=file://sle_28_2.wav; description=as soon as you hear itadd audio-segment; id=SLE_29; type=PHYSICAL; url=file://sle_29.wav; description=This is the end of your list;add audio-segment; id=SLE_30; type=PHYSICAL; url=file://sle_30.wav; description=The first entry on your list is;add audio-segment; id=SLE_38; type=PHYSICAL; url=file://sle_38.wav; description=The number is already on your list as an anonymous entry;add audio-segment; id=SLE_39; type=PHYSICAL; url=file://sle_39.wav; description=This number is already on your list;add audio-segment; id=SLE_40; type=PHYSICAL; url=file://sle_40.wav; description=The number to be removed is not on your list. Please start again, dialadd audio-segment; id=SLE_41; type=PHYSICAL; url=file://sle_41.wav; description=This is the end of your list. Your list is now empty;Step 6
add audio-segment; id=SLE_TOD; type=PHYSICAL; url=file://sle_tod.wav; description=To schedule this service, press;add audio-segment; id=SLE_TOD_ON; type=PHYSICAL; url=file://sle_tod_on.wav; description=on based on the time-of-day schedule;add audio-segment; id=SLE_TOD_OFF; type=PHYSICAL; url=file://sle_tod_off.wav; description=off based on the time-of-day schedule;add audio-segment; id=TIME_MGMT_01; type=PHYSICAL; url=file://time_mgmt_01.wav; description=Now is;add audio-segment; id=TIME_MGMT_02; type=PHYSICAL; url=file://time_mgmt_02.wav; description=service is scheduled to be on;add audio-segment; id=TIME_MGMT_03; type=PHYSICAL; url=file://time_mgmt_03.wav; description=If you are satisfied with this schedule, please press;add audio-segment; id=TIME_MGMT_04; type=PHYSICAL; url=file://time_mgmt_04.wav; description=now. To set a different time-of-day-schedule, press;add audio-segment; id=TIME_MGMT_05; type=PHYSICAL; url=file://time_mgmt_05.wav; description=Please dial now;add audio-segment; id=TIME_MGMT_06; type=PHYSICAL; url=file://time_mgmt_06.wav; description=Please enter the start time in 24 hour format;add audio-segment; id=TIME_MGMT_07; type=PHYSICAL; url=file://time_mgmt_07.wav; description=Please enter the end time in 24 hour format;add audio-segment; id=TIME_MGMT_08; type=PHYSICAL; url=file://time_mgmt_08.wav; description=Please enter the start weekday, 0 stands for Sunday, 6 stands for Saturday;add audio-segment; id=TIME_MGMT_09; type=PHYSICAL; url=file://time_mgmt_09.wav; description=Please enter the end weekday, 0 stands for Sunday, 6 stands for Saturday;add audio-segment; id=TIME_MGMT_10; type=PHYSICAL; url=file://time_mgmt_10.wav; description=That is not a valid time, the time value should be between 0 to 2359, the end time must be later than the start time;add audio-segment; id=TIME_MGMT_11; type=PHYSICAL; url=file://time_mgmt_11.wav; description=That is not a valid day, the day value should be between 0 to 6;add audio-segment; id=TIME_MGMT_12; type=PHYSICAL; url=file://time_mgmt_12.wav; description=The new schedule is now applicable;Step 7
add audio_seq id=NSA_INVOCATION; language_id=def; seq=NSA_1,var_digits,NSA_2; description=You have reached a number that does not accept solicitations. If you are a solicitor, please add this number to your do-not-call list and hang up now. Otherwise, press <d> or stay on the line;Step 8
add audio_seq id=AUTH_START; language_id=def; seq=AUTH_1; description=Please enter your password now;add audio_seq id=AUTH_INVALID_PIN; language_id=def; seq=AUTH_2; description=We are sorry, the password you entered is incorrect. Please hang up and try your call later;add audio_seq id=AUTH_NEW_PIN; language_id=def; seq=AUTH_3; description=You must now change your password. Please enter a new password now;add audio_seq id=AUTH_REPLAY_PIN; language_id=def; seq=AUTH_4,var_digits,AUTH_5,var_digits,AUTH_6,var_digits; description=Your password has been changed to <ds>. If you are satisfied with this password please press <d> now. To reenter the password, please press <d>;add audio-seq id=AUTH_END; language_id=def; seq=AUTH_4,var_digits; description=Your password has been changed to <d>;Step 9
add audio_seq id=GR220_1_ALL_PUB; language_id=def; seq=YOUR,var_audio,SLE_1_1,var_audio,THERE,var_audio,var_number,var_audio,SLE_1_2,SLE_1_3; description=Your <NSA> service is currently <on/off/tod-on/tod-off>. There <is/are> <no/num> <entry/entries> on your list. You may dial during the announcements for faster service. When you have finished, hang up;add audio_seq id=GR220_1_ALL_ANM; language_id=def; seq=YOUR,var_audio,SLE_1_1,var_audio,THERE,var_audio,var_number,ANONYMOUS,var_audio,SLE_1_ 2,SLE_1_3; description=Your <NSA> service is currently <on/off/tod-on/tod-off>. There <is/are> <num> anonymous <entry/entries> on your list. You may dial during the announcements for faster service. When you have finished, hang up;add audio_seq id=GR220_1_MIXED; language_id=def; seq=YOUR,var_audio,SLE_1_1,var_audio,THERE,var_audio,var_number,var_audio,SLE_1_2,INCLUDIN G,var_number,ANONYMOUS,var_audio,SLE_1_3; description=Your <NSA> service is currently <on/off/tod-on/tod-off>. There <is/are> <no/num> <entry/entries> on your list, including <num> anonymous <entry/entries>. You may dial during the announcements for faster service. When you have finished, hang up;add audio_seq id=GR220_3; language_id=def; seq=SLE_3_1,var_audio,DIAL,var_digits,SLE_3_2,var_sign,SLE_3_3,var_sign,SLE_3_4,var_digits,SLE_3_5,var_digits,SLE_3_6; description=To turn this service <on/off>, dial <d>. To add an entry, press <sign>. To remove one or more entries, press <sign>. To hear the entries on your list, press <d>. To hear the instructions repeated, dial <d>. Please dial now;add audio_seq id=GR220_3_TOD; language_id=def; seq=SLE_3_1,var_audio,DIAL,var_digits,SLE_TOD,var_digits,SLE_3_2,var_sign,SLE_3_3,var_sign,SLE_3_4,var_digits,SLE_3_5,var_digits,SLE_3_6; description=To turn this service <on/off>, dial <d>. To schedule this service, press <d>, To add an entry, press <sign>. To remove one or more entries, press <sign>. To hear the entries on your list, press <d>. To hear the instructions repeated, dial <d>. Please dial now;add audio_seq id=GR220_7_OTHER; language_id=def;seq=SLE_7,SLE_16_2,var_digits,SLE_16_3; description=We are sorry. The number you have dialed is incorrect. Please start again or dial <d> for instructions.;add audio_seq id=GR220_7_ACTV; language_id=def;seq=SLE_7; description=We are sorry. The number you have dialed is incorrect;add audio_seq id=GR220_8; language_id=def;seq=SLE_8; description=We are sorry, the digits dialed are not a valid command;add audio_seq id=GR220_11; language_id=def;seq=YOUR,var_audio,SLE_11_1,OFF,SLE_11_2,var_digits,SLE_11_3; description=Your <NSA> service is now off. Please continue, dial <d> for instructions or hang up;add audio_seq id=GR220_12; language_id=def;seq=YOUR,var_audio,SLE_11_1,ON,SLE_11_2,var_digits,SLE_11_3; description=Your <NSA> service is now on. Please continue, dial <d> for instructions or hang up;add audio_seq id=GR220_13; language_id=def; seq=SLE_13_1,var_sign,SLE_13_2,var_digits; description=To turn on this service, you must add an entry to your list. To add an entry, please press <sign>. If you wish to hear this announcement repeated, please dial <d>;add audio_seq id=GR220_14; language_id=def; seq=SLE_14_1,var_sign,AGAIN,SLE_14_2,var_digits,SLE_14_3,var_sign,AGAIN,SLE_14_5,var_digit s,SLE_14_1,var_sign,AGAIN,SLE_3_6; description=Dial the number to be added, then press <sign> again. To add the last calling party, press <d>, then press the <sign> again. To add a wildcard, press <d>, dial the number to be added, then press <sign> again. Please dial now;add audio_seq id=GR220_14_EXT; language_id=def; seq=SLE_14_1,var_sign,AGAIN,SLE_14_2,var_digits,SLE_14_3,var_sign,AGAIN,SLE_14_4,var_digit s,SLE_14_1,var_sign,AGAIN,SLE_14_5,var_digits,SLE_14_1,var_sign,AGAIN,SLE_3_6; description=Dial the number to be added, then press <sign> again. To add the last calling party, press <d>, then press the <sign> again. To add an extension, press <d>, dial the number to be added, then press <sign> again. To add a wildcard, press <d>, dial the number to be added, then press <sign> again. Please dial now;add audio_seq id=GR220_15; language_id=def; seq=SLE_15_1,var_sign,SLE_15_2,var_digits,SLE_14_3,var_sign,AGAIN,SLE_15_3,var_digits,SLE_ 14_3,var_sign,AGAIN,SLE_15_5,var_digits,SLE_14_3,var_sign,AGAIN,SLE_3_5,var_digits,SLE_3_6 ; description=Dial the number to be removed, then press <sign>. To remove all entries, dial <dd>, then press the <sign> again. To remove just the anonymous entries, dial <dd>, then press the <sign> again. To remove a wildcard, dial <dd>, then press <sign> again. To hear these instructions repeated, dial <d>. Please dial now;add audio_seq id=GR220_15_EXT; language_id=def; seq=SLE_15_1,var_sign,SLE_15_2,var_digits,SLE_14_3,var_sign,AGAIN,SLE_15_3,var_digits,SLE_ 14_3,var_sign,AGAIN,SLE_15_4,var_digits,SLE_14_3,var_sign,AGAIN,SLE_15_5,var_digits,SLE_14 _3,var_sign,AGAIN,SLE_3_5,var_digits,SLE_3_6; description=Dial the number to be removed, then press <sign>. To remove all entries, dial <dd>, then press the <sign> again. To remove just the anonymous entries, dial <dd>, then press the <sign> again. To remove an extension, dial <dd>, then press <sign> again. To remove a wildcard, dial <dd>, then press <sign> again. To hear these instructions repeated, dial <d>. Please dial now;add audio_seq id=GR220_16_OTHER; language_id=def;seq=SLE_16_1; description=We are sorry. The number of the last calling party is not available.add audio_seq id=GR220_16_ACTV; language_id=def;seq=SLE_16_1,SLE_16_2,var_digits,SLE_16_3; description=We are sorry. The number of the last calling party is not available. Please start again or dial <d> for instructions.Add audio_seq id=GR220_17_OTHER; language_id=def; seq=SLE_17; description=The number you have added is an anonymous entry.add audio_seq id=GR220_17_ACTV; language_id=def;seq=SLE_17,SLE_11_2,var_digits,SLE_11_3; description=The number you have added is an anonymous entry. Please continue, dial <d> for instruction, or hang up.add audio_seq id=GR220_18_OTHER; language_id=def;seq=SLE_18,var_audio,var_digits; description=The number you have added is <silence/extension> <d>;add audio_seq id=GR220_18_ACTV; language_id=def;seq=SLE_18,var_audio,var_digits,SLE_11_2,var_digits,SLE_11_3; description=The number you have added is <silence/extension> <d>. Please continue, dial <d> for instructions, or hang up.;add audio_seq id=GR220_19; language_id=def;seq=SLE_19,var_digits,SLE_16_3; description=We are sorry. Your list is full. You must remove an entry before adding another. Please try other options or dial <d> for instructions;add audio_seq id=GR220_20_OTHER; language_id=def;seq=SLE_20_1; description=We are sorry. Please try adding the number in a few minutes;add audio_seq id=GR220_20_ACTV; language_id=def;seq=SLE_20_1,SLE_20_2,var_digits,SLE_16_3; description=We are sorry. Please try adding the number in a few minutes. Please continue, or dial <d> for instructions;add audio_seq id=GR220_21_OTHER; language_id=def;seq=SLE_21_1; description=We are sorry. The number you have dialed is not a valid number. Please try again later.;add audio_seq id=GR220_21_ACTV; language_id=def;seq=SLE_21_1,SLE_20_2,var_digits,SLE_16_3; description=We are sorry. The number you have dialed is not a valid number. Please try again later. Please continue, or dial <d> for instructions;add audio_seq id=GR220_22; language_id=def;seq=SLE_22,var_digits,SLE_16_3; description=We are sorry. There are no entries on your list. Please try other options or dial <d> for instructions;add audio_seq id=GR220_23; language_id=def;seq=SLE_23,SLE_11_2,var_digits,SLE_11_3; description=The number you have removed is an anonymous entry. Please continue, dial <d> for instructions, or hang up;add audio_seq id=GR220_24; language_id=def;seq=SLE_24,var_audio,var_digits; description=The number you have removed is <silence/wildcard/extension> <ds>;add audio_seq id=GR220_25; language_id=def;seq=SLE_25,var_digits,SLE_11_3; description=There are no more entries on your list. Please continue, dial <d> for instructions, or hang up;add audio_seq id=GR220_26; language_id=def;seq=SLE_26,var_digits,SLE_11_3; description=There are no more anonymous entries on your list. Please continue, dial <d> for instructions, or hang up;add audio_seq id=GR220_27; language_id=def;seq=THERE,var_audio,var_number,ANONYMOUS,var_audio,SLE_27,SLE_16_3; description=There <is/are> <one/num> anonymous <entry/entries> on your list. Please try other options, or dial <d> for instructions;add audio_seq id=GR220_28_PUB; language_id=def; seq=THERE,var_audio,var_number,var_audio,SLE_1_2,SLE_28_1,var_digits,SLE_28_2; description=There <is/are> <one/num> <entry/entries> on your list. To delete an entry, dial <dd> as soon as you hear it;add audio_seq id=GR220_28_ANM; language_id=def; seq=THERE,var_audio,var_number,var_audio,SLE_1_2,INCLUDING,var_number,ANONYMOUS,var_audio, SLE_28_1,var_digits,SLE_28_2; description=There <is/are> <one/num> <entry/entries> on your list, including <one/num> anonymous <entry/entries>. To delete an entry, dial <dd> as soon as you hear it;add audio_seq id=GR220_29; language_id=def; seq=SLE_29; description=This is the end of your list;add audio_seq id=GR220_30; language_id=def; seq=SLE_30,var_audio,var_digits; description=The first entry on your list is <silence/extension> <ds>;add audio_seq id=GR220_31; language_id=def; seq=NEXT,var_audio,var_digits; description=Next, <silence/extention> <ds>;add audio_seq id=GR220_38; language_id=def; seq=SLE_38,SLE_11_2,var_digits,SLE_11_3; description=The number is already on your list as an anonymous entry. Please continue, dial <d> for instructions, or hang up;add audio_seq id=GR220_39; language_id=def; seq=SLE_39,var_audio,var_digits,SLE_11_2,var_digits,SLE_11_3; description=This number is already on your list. <silence/extension> <ds>. Please continue, dial <d> for instructions, or hang up;add audio_seq id=GR220_40; language_id=def; seq=SLE_40,var_digits,SLE_11_3; description=The number to be removed is not on your list. Please start again, dial <d> for instructions, or hang up;add audio_seq id=GR220_41; language_id=def; seq=SLE_41; description=This is the end of your list. Your list is now empty;add audio_seq id=GR220_42; language_id=def; seq=REPEATING,var_audio,var_digits; description=Repeating, <silence/extension>, <ds>;Step 10
add audio_seq id=TOD_START; language_id=def; seq=TIME_MGMT_01,var_day,var_time,YOUR,var_audio,TIME_MGMT_02,FROM,var_day,var_time,TO,var _day,var_time,TIME_MGMT_03,var_digits,TIME_MGMT_04,var_digits,TIME_MGMT_05; description=Now is <day><time>. Your <fname> service is scheduled to be on from <day> <time> to <day> <time>. If you are satisfied with this schedule, please press <d> now. To set a different time-of-day schedule, press <d>. Please dial now.add audio_seq id=TOD_START_TIME; language_id=def; seq=TIME_MGMT_06; description=Please enter the start time in 24 hour format;add audio_seq id=TOD_STOP_TIME; language_id=def; seq=TIME_MGMT_07; description=Please enter the end time in 24 hour format;add audio_seq id=TOD_START_DAY; language_id=def; seq=TIME_MGMT_08; description=Please enter the start weekday, 0 stands for Sunday, 6 stands for Saturday;add audio_seq id=TOD_STOP_DAY; language_id=def; seq=TIME_MGMT_09; description=Please enter the end weekday, 0 stands for Sunday, 6 stands for Saturday;add audio_seq id=TOD_INVALID_TIME; language_id=def; seq=TIME_MGMT_10;description=That is not a valid time, the time value should be between 0 to 2359, the end time must be later than the start time;add audio_seq id=TOD_INVALID_DAY; language_id=def; seq=TIME_MGMT_11; description=That is not a valid day, the day value should be between 0 to 6;add audio_seq id=TOD_CONFIRM; language_id=def; seq=TIME_MGMT_12,SLE_11_2,var_digits,SLE_11_3;description=The new schedule is now applicable.Please continue, dial <d> for instructions, or hang up;
Provisioning Feature Control Options for the IVR Interactions
This section explains how to provision certain controls for the interactions between the subscriber and the IVR server.
Step 1
add feature-config; fname=NSA; type=INVOKE-DIGITS; datatype=digits; value=1;add feature-config; fname=NSA; type=REESTART-KEY; datatype=string; value="*";add feature-config; fname=NSA; type=RETURN-KEY; datatype=string; value="#";add feature-config; fname=NSA; type=FDT-TIMER; datatype=digits; value=50;add feature-config; fname=NSA; type=IDT-TIMER; datatype=digits; value=50;Step 2
add feature-config; fname=NSA_ACT; type=RESTART-KEY; datatype=string; value="*"; description=restart key;add feature-config; fname=NSA_ACT; type=RETURN-KEY; datatype=string; value="#"; description=return key;add feature-config; fname=NSA_ACT; type=NUM-ATTEMPTS; datatype=integer; value=1; description=number of attempts;add feature-config; fname=NSA_ACT; type=T-SESSION; datatype=integer; value=600; description=session timer in 1/10 second;Step 3
add feature-config; fname=NSA_ACT; type=AUTH-ENABLED; datatype=string; value="Y"; description=whether to enable authentication for NSA_ACT or not;add feature-config; fname=NSA_ACT; type=AUTH-REPLAY-PIN-OP-CONFIRM; datatype=digits; value=1;add feature-config; fname=NSA_ACT; type=AUTH-REPLAY-PIN-OP-REENTER; datatype=digits; value=2;Step 4
add feature-config; fname=NSA_ACT; type=TOD-ENABLED; datatype=string; value="Y"; description=whether to enable TOD for NSA_ACT or not;# audio-sequence LE_MS_ON/LE_MS_OFFadd feature-config; fname=NSA_ACT; type=TOD-SET-OLD; datatype=digits; value=1;add feature-config; fname=NSA_ACT; type=TOD-SET-NEW; datatype=digits; value=2;Step 5
add feature-config; fname=SLE; type=T1-TIMER; datatype=integer; value=40; description=T1 defines how long the SPCS waits for the customer to confirm an existing remote DN or indicate that the remote DN should be changed. T1 shall be settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds;add feature-config; fname=SLE; type=T2-TIMER; datatype=integer; value=40; description=T2 defines how long the SPCS waits for the customer to specify a new remote DN. T2 defines how long the SPCS waits for the customer to specify a new remote DN;add feature-config; fname=SLE; type=T3-TIMER; datatype=integer; value=40; description=T3 defines how long the SPCS waits for the customer to specify "#", "12", or "0" when a DN must be added to the list during feature activation. T3 shall be settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds;add feature-config; fname=SLE; type=T4-TIMER; datatype=integer; value=40; description=T4 defines how long the SPCS waits for the customer to specify a DN when adding or deleting an entry. T4 shall be settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds;add feature-config; fname=SLE; type=T5-TIMER; datatype=integer; value=30; description=T5 specifies the time the originating SPCS waits for a response to the initial query sent to the Screened DN.s SPCS. T5 shall be settable between 2 and 4 seconds with an interval of 1 second and a suggested value of 3 seconds.add feature-config; fname=SLE; type=T6-TIMER; datatype=integer; value=25; description=T6 defines how long the SPCS waits for the customer to specify an option after an entry on the list has been voiced back during list review. For DTMF customers, T6 shall be settable between 2 and 3 seconds with an interval of 0.5 second and a suggested value of 2.5 seconds. For dial pulse customers, it shall be settable between 3 and 4 seconds with an interval of 0.5 second and a suggested value of 3.5 seconds;add feature-config; fname=SLE; type=IDT-TIMER; datatype=integer; value=40; description=Interdigit timer, the interdigit timing shall be settable between 2 and 9 seconds with an interval of 1 second and a suggested value of 4 seconds;add feature-config; fname=SLE; type=REPEAT-INSTRUCTION; datatype=digits; value=0;add feature-config; fname=SLE; type=LIST-REVIEW; datatype=digits; value=1;add feature-config; fname=SLE; type=TOD; datatype=digits; value=2;add feature-config; fname=SLE; type=CHANGE-STATUS; datatype=digits; value=3;add feature-config; fname=SLE; type=ADD-ENTRY; datatype=string; value="#";add feature-config; fname=SLE; type=DELETE-ENTRY; datatype=string; value="*";add feature-config; fname=SLE; type=ADD-ENTRY-RETURN-KEY; datatype=string; value="*";add feature-config; fname=SLE; type=DELETE-ENTRY-RETURN-KEY; datatype=string; value="#";add feature-config; fname=SLE; type=LAST-CALLING-PARTY; datatype=digits; value=01;add feature-config; fname=SLE; type=INTERCOM-DIALING-CODE; datatype=digits; value=02;add feature-config; fname=SLE; type=WILDCARD; datatype=digits; value=03;add feature-config; fname=SLE; type=DELETE-VOICED-BACK-ENTRY; datatype=digits; value=07;add feature-config; fname=SLE; type=DELETE-ALL-ENTRIES; datatype=digits; value=08;add feature-config; fname=SLE; type=DELETE-ALL-ANONYMOUS-ENTRIES; datatype=digits; value=09;add feature-config; fname=SLE; type=LIST-EDITING-RETURN-KEY; datatype=digits; value="#*";add feature-config; fname=SLE; type=NUM-ATTEMPTS; datatype=integer; value=1; description=number of attempts, not in GR-220;add feature-config; fname=SLE; type=T-SESSION; datatype=integer; value=600; description=default session timer, not in GR-220;
Subscriber Provisioning
This section describes the steps required to provision subscribers, assign the NSA service, and perform initial setup of the PIN.
Step 1
add subscriber id=sub_1; sub-profile-id=subprof_1; DN1=4692553008;Step 2
add subscriber-service-profile sub_id=subscriber_1; service-id=nsa;add subscriber-feature-data sub-id=sub_1_1; fname=NSA_ACT; type1=PINTYPE; value1=NEWPIN;
Caution
Step 3
add subscriber-feature-data sub-id=sub_1_1; fname=NSA_ACT; type1=PINTYPE; value1=NEWPIN;Step 4
add subscriber-tod-schedule sub-id=johnsmith; fname=nsa;add subscriber-tod-schedule sub-id=johnsmith; fname=nsa; begin-dow=THU; end-dow=FRI; begin-tod=14:00; end-tod=17:00;
Centrex Provisioning
In addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber.
MLHG Provisioning
MLHG provisioning is similar to pubscriber provisioning.
Provisioning Notes/Caveats
•
On-Net Routing and Local Number Portability for Inter-PacketCable Cable Management Server Routing
The following subsections provide example scenarios for provisioning the On-Net Routing and Local Number Portability (LNP) for Inter-PacketCable Cable Management Server (CMS) Routing feature.
Note
Provisioning LNP Queries
For all Destinations resulting from dial plan translations for which an LNP query may be allowed, use the Destination NANP-LNP-QUERY default value NA. For all Carrier entries, use LNP-QUERY default value N.
Specify the NANP-LNP-QUERY value either implicitly using add destination without specifying NANP-LNP-QUERY parameter, or explicitly set it.
For example:
change destination dest-id=local_call; nanp-lnp-query=NA;Specify Carrier LNP-QUERY = N implicitly by omitting the LNP-QUERY parameter, or explicitly.
For example:
change carrier id=0333; lnp-query=N;Provisioning an LNP Query on a Carrier Call
For all destinations resulting from dial plan translations which could result in Carrier routing (e.g., Destination call-type INTERLATA, TOLL, or CARRIER), the destination NANP-LNP-QUERY should have value PERFORM-LNP-QUERY or NA. If value NA is used, then the appropriate Carrier entry should have either USE-DIAL-PLAN=Y or LNP-QUERY = Y.
For example,
Either:
add destination dest-id=dest_carrier; call-type=INTERLATA; route-type=ROUTE; route-guide-id=carrier_rg; nanp-lnp-query=PERFORM-LNP-QUERY; description=Allow LNP query on Carrier calls;Or
add destination dest-id=dest_carrier; call-type=INTERLATA; route-type=ROUTE; route-guide-id=carrier_rg; description=nanp-lnp-query has default value NA!;
add carrier id=0333; inter=Y; intra=Y; intl=Y; use-dial-plan=N; route-guide-id=dpc1-rg; cut-thru=N; status=INS; lnp-query=Y; description=Allow an LNP query on calls to this carrier;add ported-office-code digit-string=703-484;add dial-plan id=dp_nanp_sub; digit-string=703-484; min-digits=10; max-digits=10; dest-id=dest_carrier;Provisioning Carrier Bypass (On-Net Route)—No LNP Queries
The Cisco BTS 10200 Softswitch will route this call to the carrier unless the called DN is a subscriber assigned on this switch and not in a porting transition state. For this scenario, the operator wants carrier bypass for local subscribers, but does not want to incur the overhead of LNP queries for DNs which are in the process of porting in or porting out (LNP-TRIGGER=Y). The operator might know that either A) there are no transition DNs in this switch (or perhaps all are ported-out), or B) there are very few, and the operator would prefer that the Carrier do the LNP query, and route calls back to our switch for a very few calls.
The destination has call-type INTERLATA for Carrier routing, SUB-ONLY to allow carrier bypass for local subs, and NO-LNP-QUERY to force calls needing a query to go to the carrier.
For example:
add destination dest-id=carrier_or_sub; call-type=INTERLATA; route-type=SUB; bypass-carrier-routing=SUB-ONLY; nanp-lnp-query=NO-LNP-QUERY; description=Carrier route unless SUB assigned (no query);Provisioning Carrier Bypass (On-Net Route)—LNP Queries
The Cisco BTS 10200 Softswitch routes this call to the carrier unless the called DN is a subscriber assigned on this switch. This includes DNs which are in the process of either porting in or porting out. For these transition DNs requiring an "unconditional" (ATIS document terminology), which are marked with Dn2subscriber LNP-TRIGGER=Y, will get an LNP query before the routing decision is made. For the transition DNs for which there is an LNP query, the LNP query results determine whether the call is routed to the Carrier or bypasses the carrier if the subscriber is in this switch.
The Destination has call-type INTERLATA for Carrier routing, SUB-ONLY to allow carrier bypass for local subs, and UNCONDITIONAL-LNP-TRIGGER-QUERY to allow a query for DNs during the transition period.
For example:
add destination dest-id=carr_or_sub_lnp; call-type=INTERLATA; route-type=SUB; bypass-carrier-routing=SUB-ONLY; nanp-lnp-query=UNCONDITIONAL-LNP-TRIGGER-QUERY; description=Carrier unless local SUB (query DNs during porting transition);# Mark DN 703-765-4449 as a 'transition DN" in the process of porting in or porting out
change dn2subscriber office-code-index=1; dn=4449; lnp-trigger=Y;Provisioning Carrier Bypass (On-Net Route)—Multi-Cisco BTS 10200 Softswitches
The Destination NANP-LNP-QUERY PERFORM-LNP-QUERY value is used to ensure that an LNP query is done before on-net routing. Of course, this query is still conditional, depending on whether the Ported Office Code entry exists and other related criteria. The destination call-type is either INTERLATA or TOLL, and the BYPASS-CARRIER-ROUTING value is ALL-CALLS. Three routing scenarios are possible:
1.
2.
3.
For example:
add destination dest-id=carrier_or_bypass; call-type=INTERLATA; route-type=ROUTE; route-guide-id=on_net_rg; nanp-lnp-query=PERFORM-LNP-QUERY; bypass-carrier-routing=ALL-CALLS; description=LNP query, and route to carrier, or on-net;Provisioning Inter-CMS—Subscriber Origination (if no NRS), or Trunk Origination on MGC or Terminating CMS (ALL-CALLS + LNP Query)
The provisioning for this scenario is identical to Provisioning Carrier Bypass (On-Net Route)—Multi-Cisco BTS 10200 Softswitches.
Provisioning Inter-CMS with NRS—Same Cisco BTS 10200 Softswitch Acting as CMS and MGC
The key to understanding this configuration is realizing that for a subscriber origination, the subscriber dial plan will result in a Destination which does not allow an LNP query and may have an on-net route to the NRS. But for a trunk origination on the same Cisco BTS 10200 Softswitch, the incoming trunk dial plan, for the same DN, has a different destination, which will allow an LNP query, and will not bypass the Carrier for calls to the PSTN.
For example:
# Subscriber Destination and Dial Plan; 703-484 is on-net, 301-444 is off-net;
# 703-484 may have DNs ported-out (needs queries).
# 301-444 (off-net) has no ported-in DNs Cisco BTS 10200 Softswitch, and does not need dial-plan entry (always carrier routing)
add destination dest-id=cms_sub_nrs; call-type=INTERLATA; route-type=ROUTE; route-guide-id=nrs_rg; bypass-carrier-routing=ALL-CALLS; nanp-lnp-query=NO-LNP-QUERY; description=Route all sub originations to NRS with no LNP query;add dial-plan id=dp_nanp_sub; digit-string=703-484; min-digits=7; max-digits=10; dest-id=cms_sub_nrs;# Incoming Trunk Group Destination and Dial Plan:
add destination dest-id=carrier_or_bypass; call-type=INTERLATA; route-type=ROUTE; route-guide-id=on_net_rg; nanp-lnp-query=PERFORM-LNP-QUERY; bypass-carrier-routing=ALL-CALLS; description=LNP query, and route to carrier, or on-net;add destination dest-id=dest_carrier; call-type=INTERLATA; route-type=ROUTE; route-guide-id=on_net_rg; nanp-lnp-query=NO-LNP-QUERY; bypass-carrier-routing=ALL-CALLS; description=Carrier will do LNP query;add ported-office-code digit-string=703-484add dial-plan id=dp_nanp_sub; digit-string=703-484; min-digits=7; max-digits=10; dest-id=carrier_or_bypass;add dial-plan id=dp_nanp_sub; digit-string=301-444; min-digits=7; max-digits=10; dest-id=dest_carrier;Selectively Provisioning LNP Queries (Allow or Disallow) for a Particular Call Type
A Call Type Profile entry with LNP-QUERY = Y can be added to allow an LNP query for a particular call-type, for example, WEATHER. However, by changing destination LNP criteria, it is possible to allow a query for some weather calls, but not others.
For example:
### Allow a query on Weather DN 703-569-2198
add call-type-profile call-type=WEATHER; lnp-query=Y;add destination dest-id=weather_query; call-type=WEATHER; route-type=ROUTE; route-guide-id=dpc2-rg; nanp-lnp-query=NA;add dial-plan id=dp-1; digit-string=703-569-2198; min-digits=10; max-digits=10; dest-id=weather_query;add ported-office-code digit-string=703-569-2198;### Do Not Allow a query on Weather DN 703-569-2197
add destination dest-id=weather_no_query; call-type=WEATHER; route-type=ROUTE; route-guide-id=dpc2-rg; nanp-lnp-query=NO-LNP-QUERY;add dial-plan id=dp-1; digit-string=703-569-2197; min-digits=10; max-digits=10; dest-id=weather_no_query;Outgoing Call Barring
Outgoing Call Barring (OCB) is a superset of Class Of Service screening and includes all provisioning steps of COS. However, COS functionality itself in OCB is optional and need not be provisioned.
Tip
Step 5
add/change nod-restrict-list fname1=OCB; call-type=EMG;
Note
Office Provisioning
The following is an office provisioning example for OCB.
Step 1
add feature FNAME=OCB; tdp1=COLLECTED-INFORMATION; tid1=COS-TRIGGER; ttype1=R; feature_server_id=FSPTC235; description=Outgoing Call Barring; grp_feature=N;Step 2
add feature FNAME=OCBx; tdp1=COLLECTED-INFORMATION; tid1=VERTICAL-SERVICE-CODE; ttype1=R; feature_server_id=FSPTC235; description=OCB act/deact/interr; grp_feature=N;
Note
Step 3
Note
² COS screening functionality is required as a subset of OCB.
² BW-list screening functionality of OCB needs to be offered to the subscriber even if OCB is in a deactivated state.Step 4
add vsc fname=OCBA; digit-string=*54*;Step 5
add vsc fname=OCBD; digitstring=#54*;Step 6
add vsc fname=OCBI; digit-string=#54#;Step 7
add service id=ocb; FNAME1=OCB; FNAME2=OCBA; FNAME3=OCBD; FNAME4=OCBIStep 8
add feature fname=OCB; type1=pin-len; value1=5; type2=to; value2=20; type3=fail-cnt; value3=4; type4=lock-out; value4=60;Step 9
add nod-restrict-list fname=OCB; call-type=local;Step 10
add ocb-profile Id=ocb_prof; Max-k-values=5; All-calls-restrict-k-value=5; Fail-cnt=3; Pin-len=5; Lock-out=30; Time-out=30; Deactivation-option=K-VALUE-MATCH; Free-select-pin=Y;Step 11
add ocb-k-value Ocb-profile-id=ocb_prof; k-value=1; call-type=local, call-type=intl;
Note
Step 12
add ca-config Type=DEFAULT-OCB-PROFILE-ID; Datatype=STRING; Value=ocb_prof;Step 13
add pop Id=<subscriber corresponding pop id>; Ocb-profile-id=ocb_prof;
Subscriber Provisioning
The following is a subscriber provisioning example:
Step 1
add subscriber-service-profile sub-id=sub1_plano.com; service-id=ocb;Step 2
add subscriber-feature-data sub-id=sub1_plano.com; fname=OCB; type1=PASSWD; value1=1234;
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. OCB can be activated and deactivated alternately by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate OCB:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=OCB; type1=K_VALUE;value1=1; type2=PASSWD; value2=1234;
Note
Use a CLI command similar to the following to deactivate OCB:
add subscriber-feature-data sub-id=sub_1; active=N; fname=OCB;Provisioning Notes and Caveats
•
•
•
Outgoing Call Barring—Activation, Deactivation, and Interrogation
The following subsections identify necessary steps for the OCBA, OCBD, and OCBI features to be offered.
Note
Office Provisioning
Step 1
add feature FNAME=OCBx; tdp1=COLLECTED-INFORMATION; tid1=VERTICAL-SERVICE-CODE; ttype1=R; feature_server_id=FSPTC235; description=OCB act/deact/interr; grp_feature=N;Step 2
add vsc fname=OCBA; digit-string=*54*;Step 3
add vsc fname=OCBD; digit-string=#54*;Step 4
add vsc fname=OCBI; digit-string=*#54*;Step 5
add service id=1; FNAME1=OCB; FNAME2=OCBA; FNAME3=OCBD; FNAME4=OCBI;Step 6
add/change feature fname=OCB; pin-len=5; to=20; fail-cnt=4; lock-out=60
Subscriber Provisioning
Step 1
add/change subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;Step 2
add/change subscriber-feature-data sub-id=sub1_plano.com; fname=OCB; type1=PASSWD; value1=1234;
Centrex Provisioning
For the feature, in addition to basic Centrex office provisioning, the Centrex subscriber requires similar provisioning as a POTS subscriber. In addition, the following step must be performed.
Step 1
add/change custom-dial-plan ID=cdp1; DIGIT-STRING=*54*; NOD=VSC; FNAME=OCBA; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1; DIGIT-STRING=#54*; NOD=VSC; FNAME=OCBD; CAT-STRING=1111111111111111;add/change custom-dial-plan ID=cdp1; DIGIT-STRING=*#54*; NOD=VSC; FNAME=OCBI; CAT-STRING=1111111111111111;MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
•
•
Alternate Activation and Deactivation Method
This feature is deactivated by default when it is assigned to a subscriber. OCB can alternately be activated and deactivated by creating an entry in the Subscriber-feature-data table.
Use a CLI command similar to the following to activate OCB:
add subscriber-feature-data sub-id=sub_1; active=Y; fname=OCB; type1=K_VALUE;value1=1; type2=PASSWD; value2=1234;
Note
Use a CLI command similar to the following to deactivate OCB:
add subscriber-feature-data sub-id=sub_1; active=N; fname=OCB;Outgoing Simulated Facility Group
The following subsections identify necessary steps to provision the OSGF feature.
Office Provisioning
Step 1
add feature FNAME=OSFG; TDP1=ROUTE_SELECTED; TID1=ROUTE_SELECTED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; GRP_FEATURE=N; DESCRIPTION=Outgoing Simulated Facility Group Feature;Step 2
add service id=2; FNAME1=OSFG;
Centrex Provisioning
Step 1
add subscriber-service-profilesub_id=sub_1; service-id=2;Step 2
change ctxg ID=ctxg1; SFG_CONTROL=Y; IN_SFG_COUNT=3; OUT_SFG_COUNT=3; BOTH_SFG_COUNT=4;This feature is only applicable to MLHG-CTX. MLHG provisioning is similar to Centrex provisioning as described above.
Own Calling Number Announcement
This section explains the steps required to provision the Own Calling Number Announcement (OCNA) feature.
Office Provisioning
Step 1
add announcement ID=903; TYPE=system; SEND_ANSWER=N; NUM_REPEAT=1; ROUTE_GUIDE_ID=annc5_rg; ANNOUNCEMENT_TIMER=180; ANNOUNCEMENT_NUMBER=92;Step 2
ADD/CHANGE DIAL_PLAN ID=dp1; DIGIT_STRING=4692550002; DEST_ID=DEST_CALLING_NUM; SPLIT_NPA=NONE; DEL_DIGITS=0; MIN_DIGITS=10; MAX_DIGITS=10; NOA=NATIONAL;Step 3
ADD/CHANGE DESTINATION DEST_ID=DEST_CALLING_NUM; CALL_TYPE=LOCAL; ROUTE_TYPE=ANNC; ANNC_ID=903;You can also provision the OCNA feature through the DN2 Subscriber table.
Step 1
add announcement ID=903; TYPE=system; SEND_ANSWER=N; NUM_REPEAT=1; ROUTE_GUIDE_ID=annc5_rg; ANNOUNCEMENT_TIMER=180; ANNOUNCEMENT_NUMBER=92;Step 2
ADD/CHANGE DIAL_PLAN ID=DP1; DIGIT_STRING=4692550002; DEST_ID=DEST_CALLING_NUM; SPLIT_NPA=NONE; DEL_DIGITS=0; MIN_DIGITS=10; MAX_DIGITS=10; NOA=NATIONAL;Step 3
ADD/CHANGE DESTINATION DEST_ID=DEST_CALLING_NUM; CALL_TYPE=LOCAL; ROUTE_TYPE=SUB;Step 4
ADD/CHANGE DN2SUBSCRIBER OFFICE_CODE_INDEX=11; DN=0002; STATUS=ANNC; ANNC_ID=9003;
Provisioning From a VSC
In Release 5.0, MR1, you can provision the OCNA feature from a VSC. This section explains the steps required to provision the OCNA from a VSC.
Note
Step 1
add feature fname=OCNA;TDP1=COLLECTED_INFORMATION;TID1=VERTICAL_SERVICE_CODE;TTYPE1=R;FEATURE-SERVER-ID=FSPTC235;DESCRIPTION=Own Calling Number Announcement;GRP-FEATURE=N;Step 2
add VSC DIGIT-STRING=*nnn;FNAME=OCNA;Step 3
add annc id=903;announcement_number=92;route_guide_id=10012;type=SYSTEM;num_repeat=1;send_answer=N;Step 4
add release-cause id=1360; annc-id=903;
Centrex Provisioning
If you are a Centrex subscriber, you must perform the next step to provision the custom dial plan (CDP) table.
Step 1
add cdp ID=tb106-18;DIGIT_STRING=*nnn;NOD=VSC;FNAME=OCNA;CAT_STRING=11111111111;
Privacy Screening
The Privacy Screening (PS) feature enables a subscriber to accept or reject an anonymous call based on a short message recorded by the caller. The following subsections enable the feature to be offered.
Tip
Office Provisioning
Step 1
add/change feature FNAME=PS; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 2
add/change feature FNAME=PS_MANAGE; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 3
add/change feature FNAME=PS_O; TDP1=COLLECTED_INFORMATION; TID1=PS_TRIGGER; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 4
add softsw-tg-profile id=10;protocol-type=SIP;add trunk-grp id=21;softsw-tsap-addr=<ip address of the PS AS IPUnity box>:5060; call-agent-id=CA146;tg-type=softsw; tg-profile-id=10; dial-plan-id=dp1;add subscriber id=PS_AS;category=PBX;dn1=469-255-2001; tgn-id=21; sub-profile-id=sp1; term-type=TG;
Note
add service; id=PS_O; fname1=PS_O;add trunk-grp-service-profile; tgn-id=21; service-id=PS_O ;add trunk-grp id=22;softsw-tsap-addr=<domain name of the PS AS IPUnity Box>:5060; call-agent-id=CA146;tg-type=softsw; tg-profile-id=10;dial-plan-id=dp1;add subscriber id=PS_MANAGE_AS;category=PBX; dn1=469-255-2002; tgn-id=22; sub-profile-id=sp1; term-type=TG;
Note
Step 5
add/change vsc; fname=PS_MANAGE; DIGIT_STRING=*94;Step 6
add/change service id=PS; FNAME1=PS; FNAME2=PS_MANAGE;Step 7
Add/change feature_config Fname=PS; TYPE=PRIVACY-UNKNOWN-TREATMENT; VALUE=[ANONYMOUS|PUBLIC];
Provisioning Resources
Create the PS table and assign to the subscriber, sub-profile, pop, and ca-config.
Step 1
add/change app-server id=PS; APP_SERVER_DN=469-255-2001; APP_SERVER_ACCESS_DN=469-255-2002; DESCRIPTION=PS AS; APP_SERVER_TYPE=PM;Step 2
Change sub; id=<sub>; PRIVACY_MANAGER_ID=PS;Step 3
Change sub-profile; id=<sub-profile>; PRIVACY_MANAGER_ID=PS;Step 4
Change pop; id=<pop>; PRIVACY_MANAGER_ID=PS;Step 5
Add ca-config; TYPE=default-privacy-manager-id; VALUE=PS;
Subscriber Provisioning
Step 1
add/change sub-service-profile sub-id=[sub]; service-id=PS;
Centrex Provisioning
Step 1
add/change cdp; fname=PS_MANAGE; DIGIT_STRING=*94; nod=VSC; CAT_STRING=1111111111111111;
MLHG Provisioning
MLHG provisioning is the same as subscriber provisioning.
REFER
The following subsections identify necessary steps to provision the Refer feature.
Note
Office Provisioning
Step 1
add feature FNAME=REFER; TDP1=O_MID_CALL; TID1=REFER_TRIGGER; TTYPE1=R; TDP2=T_MID_CALL; TID2=REFER_TRIGGER; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=SIP REFER;Step 2
add/change service id=999; FNAME1=REFER;Step 3
add/change ca-config TYPE=DEFAULT-OFFICE-SERVICE-ID; DATATYPE=STRING; VALUE=999;
Provisioning Notes/Caveats
The Refer feature is applicable only for SIP subscribers.
Remote Activation of Call Forwarding and PIN_Change
Remote Call Forwarding Activation (RACF) allows you to manipulate your CFU (Call Forwarding - Unconditional) feature remotely. This feature ensures you can always be reached regardless of your location and movements, provided RACF is used at your location.
Tip
The following subsections identify necessary steps for the feature RACF and RACF PIN change to be offered.
Office Provisioning
Step 1
add ca-config TYPE=IVR-DN; DATATYPE=DIGITS; VALUE=9727892000;
Resource Provisioning (IVR)
Step 1
Follow the steps in the IVR Provisioning section for Screen List Editing: SCF, SCR, SCA, and DRCW.
Step 2
add subscriber ID=racf_annc_sub; CATEGORY=RACF; NAME=racf_annc_sub; STATUS=ACTIVE; dn1=972-789-1000; PRIVACY=NONE; RING-TYPE-DN1=1; TGN-ID=1; USAGE-SENS=N; SUB-PROFILE-ID=sp; TERM-TYPE=ROUTE; POLICY-ID=rt_annc;
Feature Provisioning
Step 1
add feature fname=RACF; description=Remote Activation of Call Forwarding; feature_server_id=<feature server ID>;Step 2
add feature fname=IVR; tdp1=T_ANSWER; tid1=T_ANSWER; ttype1=R; description=Internal IVR feature; feature_server_id=<feature server ID>;Step 3
add feature fname=RACF_PIN; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=RACF PIN change; feature_server_id=<feature server ID>;
Note
Step 4
add service id=1; fname1=RACF;Step 5
add service id=2; fname1=RACF_PIN;Step 6
add service id=3; fname1=RACF; fname2=RACF_PIN;Step 7
add service id=IVR_SVC; fname1=IVR;Step 8
add vsc digit_string=*98; fname=RACF_PIN;
Provisioning Notes/Caveats
•
•
•
•
Subscriber Provisioning
Step 1
add sub-service-profile sub-id=racf_annc_sub; service-id=3;Step 2
add sub-service-profile sub-id=racf_annc_sub; service-id=IVR_SVC;Step 3
add sub-service-profile sub-id=ivr_annc_sub; service-id=3;Step 4
add sub-service-profile sub-id=ivr_annc_sub; service-id=IVR_SVC;Step 5
add sub-service-profile sub-id=sub1; service-id=1;add subscriber-feature-data sub-id=sub1; fname=RACF; type1=PINTYPE; value1=AUTHCODE;Step 6
add sub-service-profile sub-id=sub2; service-id=3;add subscriber-feature-data sub-id=sub2; fname=RACF; type1=PINTYPE; value1=NEWPIN; type2=PIN; value2=99999;
Auth Code Provisioning
Use the following subsections to provision the auth code group and auth code for non-unique PIN subscribers.
Step 1
add auth-code-grp id=DEFAULT_ACGROUP; description=authorization codes;Step 2
add cos-restrict id=NO_RESTRICTION; casual-restrict-type=ALL-CICS ALLOWED; national-restrict-type=ALL-NANP-CALLS; national-wb-list=NONE; intl-restrict-type=ALL-CC-ALLOWED; ii-restrict=NONE; block-900=N; block-976=N; block-da=N; block-nanp-oper-assist=N; block-intl-oper-assist=N; acct-code-allow=Y; acct-code-length=4; auth-code-allow=Y; auth-code-length=5; auth-code-grp-id=DEFAULT_ACGROUP;Step 3
add auth-code auth-code-grp-id=DEFAULT_ACGROUP; id=12345; active=Y;
Remote Call Forwarding
Remote Call Forwarding (RCF) allows incoming calls to be routed automatically to a remote DN.
Tip
The following subsections identify necessary steps for the RCF feature to be offered.
Note
Office Provisioning
Step 1
add feature FNAME=CFU; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FNAME1=CFUA; FNAME2=CFUD; FNAME3=CFUI; FEATURE_SERVER_ID=FSPTC235; TYPE1=MCF; VALUE1=Y; DESCRIPTION=CFU; GRP_FEATURE=N;Step 2
add feature FNAME=RCF; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FNAME1=CFU; FEATURE_SERVER_ID=FSPTC235; TYPE1=MCF; VALUE1=Y; DESCRIPTION=Remote Call Forwarding;Step 3
add service id=1; FNAME1=RCF;
Subscriber Provisioning
Step 1
add subscriber id=subscriber_1; sub-profile-id=profile2; dn1=972-555-2222; billing-dn=972-555-2222; term-type=NONE;
Note
Step 2
add subscriber-service-profile sub-id=subscriber_1; service-id=1;Step 3
add subscriber-feature-data sub-id=subscriber_1; fname=CFU; active=Y; type1=FDN1; value1=4692550000; type2=RR; value2=N;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Replace
The following subsections identify necessary steps to offer the Replace feature.
Office Provisioning
Step 1
add/change feature FNAME=REPLACE; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=REPLACE TRIGGER; TTYPE1=R; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID2=REPLACE_TRIGGER;TTYPE2=R; FEATURE_SERVER_ID=FSPTC325; DESCRIPTION=SIP REPLACE;Step 2
add/change service id=999; FNAME=REPLACE;Step 3
add/change ca-config; TYPE=DEFAULT-OFFICE-SERVICE-ID; DATATYPE=STRING; VALUE=999
Provisioning Notes/Caveats
The Replace feature is only applicable for SIP subscribers.
Screen List Editing: SCF, SCR, SCA, and DRCW
The following subsections identify necessary steps for the features Selective Call Forwarding (SCF), Selective Call Rejection (SCR), Selective Call Acceptance (SCA), and Distinctive Ringing Call Waiting (DRCW) to be offered with the ability for a subscriber to provision them through IVR.
Note
Tip
Office Provisioning
Step 1
add ca-config TYPE=IVR-DN; DATATYPE=DIGITS; VALUE=9727892000;add ca-config TYPE=SLE-LIST-SIZE; DATATYPE=INTEGER; VALUE=31;add ca-config TYPE=SLE-DE-THRESHOLD; DATATYPE=INTEGER; VALUE=3add ca-config TYPE=SLE-TO-THRESHOLD; DATATYPE=INTEGER; VALUE=3add ca-config TYPE=SLE-TIMER-T1; DATATYPE=INTEGER; VALUE=4add ca-config TYPE=SLE-TIMER-T2; DATATYPE=INTEGER; VALUE=4add ca-config TYPE=SLE-TIMER-T3; DATATYPE=INTEGER; VALUE=4add ca-config TYPE=SLE-TIMER-T4; DATATYPE=INTEGER; VALUE=4add ca-config TYPE=SLE-TIMER-T5; DATATYPE=INTEGER; VALUE=3add ca-config TYPE=SLE-TIMER-T6; DATATYPE=INTEGER; VALUE=25add ca-config TYPE=SLE-TIMER-T7; DATATYPE=INTEGER; VALUE=4
Resource Provisioning (IVR)
Step 1
add mgw-profile ID=ms_profile; VENDOR=Cisco; SILENT-SUPPRESS-SUPP=N; RBK-ON-CONN-SUPP=N; PACKET-TYPE=IP; AAL1=N; AAL2=N; AAL5=N; PVC=N; SVC=N; SPVC=N; EC=N; SDP-ORIGFIELD-SUPP=N; SDP-SESSNAME-SUPP=N; SDP-EMAIL-SUPP=N; SDP-PHONE-SUPP=N; SDP-URI-SUPP=N; SDP-BANDWIDTH-SUPP=N; SDP-INFO-SUPP=N; SDP-TIME-SUPP=N; SDP-ATTRIB-SUPP=N; MGCP-ERQNT-SUPP=N; MGCP-HAIRPIN-SUPP=N; MGCP-QLOOP-SUPP=N; MGCP-3WAY-HSHAKE-SUPP=Y; MGCP-CONN-ID-AT-GW-SUPP=Y; MGCP-CMD-SEQ-SUPP=N; MGCP-VMWI-SUPP=N; TERMINATION-PREFIX=ann/; PORT-START=0; MGCPVERSION=MGCP_0_1; MGCP-RSVP-SUPP=N;Step 2
add mgw id=ipunity_ms; tsap-addr=<ip addr of MS MGCP>; call-agent-id=CA166; mgw-profile-id=ms_profile; rgw=n; tgw=y; call-agent-control-port=0; ans=n; ivr=y; nas=n; pbx=n;Step 3
add annc-tg-profile id=annc_tg_p; annc=N; ivr=Y; auto_answer=Y;Step 4
add termination prefix=ann/; port-start=0; port-end=30; type=trunk; mgw-id=ipunity_ms;Step 5
add trunk-grp id=1; call-agent-id=CA146; tg_type=annc; tg-profile-id=annc_tg_p; mgcp-pkg-type=AUDIO; qos-id=qos123;
Note
Step 6
add trunk cic-start=1; cic-end=30; tgn-id=1; termination-prefix=ann/; termination-port-start=0; termination-port-end=29; mgw-id=ipunity_ms;Step 7
add ndc digit-string=972;Step 8
add exchange-code ndc=972; ec=789;Step 9
add office-code ndc=972; ec=789; dn-group=xxxx; call-agent-id=CA146;Step 10
add destination dest-id=ivr; call-type=LOCAL; route-type=sub;Step 11
add dial-plan id=dp; digit-string=972-789; reqd-digits=10; dest-id=ivr;Step 12
add pop id=1; state=tx; country=usa; timezone=CST;Step 13
add subscriber-profile id=sp; dial-plan-id=dp; pop-id=1;Step 14
add route id=rt_annc; tgn1-id=1; tg-selection=LCR;Step 15
add subscriber ID=ivr_annc_sub; CATEGORY=IVR; NAME=ivr_annc_sub; STATUS=ACTIVE; dn1=972-789-2000; PRIVACY=NONE; RING-TYPE-DN1=1; TGN-ID=1; USAGE-SENS=N; SUB-PROFILE-ID=sp; TERM-TYPE=ROUTE; POLICY-ID=rt_annc;Step 16
change trunk_grp id=1; call-agent-id=CA146; main-sub-id=ivr_annc_sub;Step 17
add route-guide id=rg_annc; policy-type=ROUTE; policy-id=rt_annc;
Feature Provisioning
Step 1
add feature fname=SCF; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Selective Call Forwarding; feature_server_id=<feature server ID>;Step 2
add feature fname=SCF_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Selective Call Fwd Activation; feature_server_id=<feature server ID>;Step 3
add feature fname=SCR; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Selective Call Rejection; feature_server_id=<feature server ID>;Step 4
add feature fname=SCR_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Selective Call Rejection Act; feature_server_id=<feature server ID>;Step 5
add feature fname=SCA; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Selective Call Acceptance; feature_server_id=<feature server ID>;Step 6
add feature fname=SCA_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Selective Call Acceptance Act; feature_server_id=<feature server ID>;Step 7
add feature fname=DRCW; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Distinctive Ring CW; feature_server_id=<feature server ID>;Step 8
add feature fname=DRCW_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Distinctive Ring CW Act; feature_server_id=<feature server ID>;Step 9
add feature fname=IVR; tdp1=T_ANSWER; tid1=T_ANSWER; ttype1=R; description=Internal IVR feature; feature_server_id=<feature server ID>;Step 10
add service id=1; fname1=SCF; fname2=SCF_ACT; fname3=SCR; fname4=SCR_ACT; fname5=SCA; fname6=SCA_ACT; fname7=DRCW; fname8=DRCW_ACT; description=Full SLE features for subscriber;Step 11
add service id=2; fname1=SCF_ACT; fname2=SCR_ACT; fname3=SCA_ACT; fname4=DRCW_ACT; description=SLE activations for IVR virtual sub;Step 12
add service id=IVR_SVC; fname1=IVR;Step 13
add vsc digit_string=*63; fname=SCF_ACT;add vsc digit_string=*60; fname=SCR_ACT;add vsc digit_string=*64; fname=SCA_ACT;add vsc digit_string=*61; fname=DRCW_ACT;
Subscriber Provisioning
Step 1
add sub-service-profile sub-id=ivr_annc_sub; service-id=2;Step 2
add sub-service-profile sub-id=ivr_annc_sub; service-id=IVR_SVC;Step 3
add sub-service-profile sub-id=sub1; service-id=1;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Provisioning Notes/Caveats
Subscribers who are assigned DRCW will need CW, CIDCW, or CWD for the Call-Waiting portion of DRCW to work.
Non-IVR Activation and Deactivation of SCA, SCF, SCR, and DRCW
Configuring this feature requires provisioning eight related features. There is an activation and deactivation VSC for each of the SCA, SCR, SCF, and DRCW features.
The DRCW feature is only for playing a distinctive ringing or distinctive call-waiting tone and does not affect the activation of the call-waiting features (CW, CWD, or CIDCW). A subscriber must have CW, CWD, or CIDCW provisioned and activated in order to receive call-waiting treatment.
Step 1
Example:
CLI> ADD FEATURE FNAME=SCR_NOIVR_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; DESCRIPTION=SELECTIVE CALL REJECT ACTIVATION WITH NO IVR; FEATURE_SERVER_ID=FSPTC235;Defines the eight features.
Repeat this step for the following features:
SCR_NOIVR_DEACT
SCA_NOIVR_ACT
SCA_NOIVR_DEACT
SCF_NOIVR_ACT
SCF_NOIVR_DEACT
DRCW_NOIVR_ACT
DRCW_NOIVR_DEACT
Step 2
Example:
CLI> ADD FEATURE FNAME=SCA; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235; FNAME1=SCA_ACT; FNAME2=SCA_NOIVR_ACT; FNAME3=SCA_NOIVR_DEACT;Combines the set of activation, deactivation, and base features.
Repeat this step for SCR, SCF, and DRCW.
Step 3
Example:
CLI> ADD SERVICE ID=SLE; FNAME1=SCF; FNAME2=SCR; FNAME3=SCA;FNAME4=DRCW; DESCRIPTION=FULL SLE FEATURES FOR SUBSCRIBER;Adds full SLE features with activation ability for regular subscribers.
Step 4
Example:
CLI> ADD VSC DIGIT_STRING=*236; FNAME=SCA_NOIVR_ACT; DIGIT_STRING=*236; FNAME=SCA_NOIVR_DEACT;Adds the e VSCs.
Add a VSC for each feature added in Step 1.
Note
Step 5
Example:
CLI> ADD SUB_SERVICE_PROFILE; SUB_ID=IVR_ANNC_SUBSCRIBER; SERVICE_ID=SLE;Adds the set of SLE features to the subscriber.
Step 6
Exampe:
CLI> ADD ANNC ID=613; TYPE=SYSTEM; SEND_ANSWER=N NUM_REPEAT=1; ANNOUNCEMENT_FILE=ann_id_613.au; ROUTE_GUIDE_ID=ANNC1; ANNOUNCEMENT_NUMBER=613; ANNOUNCEMENT_TIMER=180;Configures the announcement IDs.
First, add an announcement id and associate it with an announcement audio file.
Step 7
Example:
CLI> ADD RELEASE_CAUSE ID=1311; ANNC-ID=590;Defines the announcement ID to be used for the release cause code.
Repeat these two steps for each of the 12 cause code.
Step 8
This step is necessary to allow 3-digit VSCs.
Step 9
Step 10
show feature fname=sca_noivr_actshow feature fname=scashow service id=sleshow digit-mapshow release-cause id=1311show annc id=590show mgw-profile
Alternate Activation and Deactivation Method
The following procedure provides an alternative method for activating, deactivating, and provisioning the SCF, SCR, SCA, and DRCW features. The example below activates DRCW:
Step 1
add service id=10; fname1=DRCWStep 2
Add sub-service-profile sub-id=sub1; service-id=10;Step 3
Add sub-feature-data sub-id=sub1; fname=DRCW; active=Y/N;Step 4
add sle sub-id=sub1; fname=DRCW; dn=9726712355;Step 5
change sub-feature-data sub-id=sub1; fname=SCF; type1=FDN1; value1=469-575-4567;
Seasonal Suspend Provisioning for MR1 and Earlier
This section explains how to provision the Seasonal Suspend feature.
Note
Office Provisioning
You can use the following procedure create the seasonal suspend and CoS features and to provisions a special cos-restriction ID for the Seasonal Suspend feature. You can also set up announcements for the seasonal suspend line.
Step 1
add feature fname=SEAS; tdp1=COLLECTED_INFORMATION; tid1=COS_TRIGGER; ttype1=R; tdp2=TERMINATION_ATTEMPT_AUTHORIZED; tid2=TERMINATION_ATTEMPT_AUTHORIZED; ttype2=R; feature-server-id=FSPTC235; description=Seasonal Suspend; grp-feature=N;Step 2
add feature fname=COS; tdp1=COLLECTED_INFORMATION; tid1=COS_TRIGGER; ttype1=R; feature-server-id=FSPTC235; description=Class Of Service; grp-feature=N;Step 3
add service id=ServiceForCOS; fname1=COS; description=Service with COS feature;Step 4
a.
show ca-config type=default-office-service-id;(In this example, assume that the system displays the default-office-service-id as offc999.)
b.
show service id=offc999;c.
change service id=offc999; fnameX=SEAS;where fnameX is a previously unused feature-number parameter in this service table.
Caution
d.
show service id=offc999;Step 5
add cos-restrict id=special_cos_1; national-wb-list=white; block-900=Y; block-976=Y; block-nanp-oper-assist=Y; block-intl-oper-assist=Y; acct-code-allow=N; auth-code-allow=N; nod-wb-list=none;Step 6
Caution
add national-wb-list cos-restrict-id=special_cos_1; digit-string=611;add national-wb-list cos-restrict-id=special_cos_1; digit-string=972-555-1234;Step 7
add feature-config fname=SEAS; type=cos-restrict-id; datatype=string; value=special_cos_1;
Note
Step 8
Note
add trigger-nod-escape-list tid=COS_TRIGGER; nod=EMG;add trigger-nod-escape-list tid=COS_TRIGGER; nod=REPAIR;add trigger-nod-escape-list tid=COS_TRIGGER; nod=FIRE;add trigger-nod-escape-list tid=COS_TRIGGER; nod=AMBULANCE;add trigger-nod-escape-list tid=COS_TRIGGER; nod=POLICE;Step 9
add release-cause id=1272; annc-id=629;add release-cause id=1273; annc-id=630;add release-cause id=1274; annc-id=631;add release-cause id=1275; annc-id=632;Step 10
add announcement id=629; announcement-file=ann_id_orig_generic.au; route-guide-id=annc1; announcement-number=629;add announcement id=630; announcement-file=ann_id_orig_generic_plus_dn.au; route-guide-id=annc1; announcement-number=630;add announcement id=631; announcement-file=ann_id_term_generic.au; route-guide-id=annc1; announcement-number=631;add announcement id=632; announcement-file=ann_id_term_generic_plus_dn.au; route-guide-id=annc1; announcement-number=632;
Subscriber Provisioning
Use the following procedure to assign the CoS and Seasonal Suspend features to the subscriber.
Step 1
add sub-service-profile sub-id=sub1; service-id=ServiceForCOS;Step 2
show sub-service-profile sub-id=sub1;Step 3
change subscriber id=sub1; status=seasonal-suspend; cos-restrict-id=special_cos_1;Step 4
show subscriber id=sub1;
Provisioning Options for Inbound Call Treatment
This section explains how to provision inbound call treatment options.
Add a Referral DN to Inbound Seasonal Suspend Announcement
You can use this command to add a referral DN to the subscriber-feature-data table. If you do that, the system plays a seasonal suspend announcement that includes the referral DN, entered as value1 in this command. The value for value1 must be a valid DN and must be entered without any dashes (hyphens). If you do not enter this command, the system still plays the generic inbound seasonal suspend message.
add/change subscriber-feature-data sub-id=sub1; fname=SEAS; active=Y; type1=FDN1; value1=7895552345;
Note
Route to VMA Instead of Seasonal Suspend
You can provision the system to route all inbound calls to voicemail with the VMA feature. To enable this feature, you must take the following steps:
•
•
Caution
Provisioning Options for Outbound Call Treatment
Provision the Seasonal Suspend feature either to provide an announcement on disallowed outbound call attempts or to route disallowed outbound calls to the customer support DN. The parameters for these options are in the feature-config table:
•
•
Note
Note
Route to Seasonal Suspend Announcement
add feature-config fname=SEAS; type=route-to-cust-support-dn; datatype=boolean; value=N;add feature-config fname=SEAS; type=cust-support-dn; datatype=string; value=3455555555;Route to Customer Support DN
add feature-config fname=SEAS; type=route-to-cust-support-dn; datatype=boolean; value=Y;add feature-config fname=SEAS; type=cust-support-dn; datatype=string; value=3455555555;Turning Off (Deactivating) Seasonal Suspend
To turn off the seasonal suspend status for a subscriber, change the status to active and restore the original cos-restrict-id that was assigned to the subscriber prior to the seasonal suspend period. If you want to remove the seasonal suspend cos-restrict-id without replacing it, enter cos-restrict-id=NULL.
change subscriber id=sub1; status=active; cos-restrict-id=<original ID>;Troubleshooting, MR1 and Earlier
This section explains how to troubleshoot the following conditions:
Problems with Inbound Calls
If inbound calls are not routed to the seasonal suspend announcement, make sure that the Seasonal Suspend feature (fname<n>=SEAS) has been assigned to the default office service ID.
If an inbound call is supposed to receive an announcement but that does not happen, verify that the routing to the server is properly provisioned in the BTS 10200, that the server is in service, and that the appropriate announcement files are loaded on the server.
If an inbound call is supposed to receive an announcement that specifies the referral DN (a DN at which the subscriber can be reached), but the referral DN is not included in the announcement, verify that the subscriber-feature-data table has the following parameters provisioned for fname=SEAS:
•
•
Problems with Outbound Calls
After the subscriber status is set to seasonal-suspend, outbound calls should receive the seasonal suspend announcement. If this does not occur, make sure that you have also provisioned the correct CoS restriction (cos-restrict-id=special_cos_1 in the previous examples) in the feature-config table.
If the announcement for the outbound call is supposed to include the customer support DN but this DN is not included, check the provisioning in the feature-config table. Make sure that you have set route-to-cust-support-dn=N and that you have provisioned the correct DN for cust-support-dn.
If outbound calls are supposed to be routed to the customer support DN but they are not being routed properly, check the provisioning in the feature-config table. Make sure that you have set route-to-cust-support-dn=Y and that you have provisioned the correct DN for cust-support-dn. The value for cust-support-dn must be a valid DN and must be entered without any dashes (hyphens).
If outbound calls are supposed to receive an announcement but this does not occur, verify that the routing to the server is properly provisioned in the BTS 10200, that the server is in service, and that the appropriate announcement files are loaded on the server.
Seasonal Suspend Provisioning for MR1.1 and Later
This section explains how to provision the Seasonal Suspend feature for MR1.1 and Later.
Note
Office Provisioning
You can use the following procedure to create the seasonal suspend and CoS features and to provision a special cos-restriction ID for the Seasonal Suspend feature. You can also set up announcements for the seasonal suspend line.
Step 1
add feature fname=SEAS; tdp1=COLLECTED_INFORMATION; tid1=COS_TRIGGER; ttype1=R; tdp2=TERMINATION_ATTEMPT_AUTHORIZED; tid2=TERMINATION_ATTEMPT_AUTHORIZED; ttype2=R; feature-server-id=FSPTC235; description=Seasonal Suspend; grp-feature=N;Step 2
e.
show ca-config type=default-office-service-id;(In this example, assume that the system displays the default-office-service-id as offc999.)
f.
show service id=offc999;g.
change service id=offc999; fnameX=SEAS;where fnameX is a previously unused feature-number parameter in this service table.
Caution
h.
show service id=offc999;Step 3
add cos-restrict id=special_cos_1; national-wb-list=white; block-900=Y; block-976=Y; block-nanp-oper-assist=Y; block-intl-oper-assist=Y; acct-code-allow=N; auth-code-allow=N; nod-wb-list=none;Step 4
Caution
add national-wb-list cos-restrict-id=special_cos_1; digit-string=611;add national-wb-list cos-restrict-id=special_cos_1; digit-string=972-555-1234;Step 5
a.
b.
c.
Caution
Step 6
add feature-config fname=SEAS; type=cos-restrict-id; datatype=string; value=special_cos_1;
Note
Step 7
Note
add trigger-nod-escape-list tid=COS_TRIGGER; nod=EMG;add trigger-nod-escape-list tid=COS_TRIGGER; nod=REPAIR;add trigger-nod-escape-list tid=COS_TRIGGER; nod=FIRE;add trigger-nod-escape-list tid=COS_TRIGGER; nod=AMBULANCE;add trigger-nod-escape-list tid=COS_TRIGGER; nod=POLICE;Step 8
add release-cause id=1272; annc-id=629;add release-cause id=1273; annc-id=630;add release-cause id=1274; annc-id=631;add release-cause id=1275; annc-id=632;Step 9
add announcement id=629; announcement-file=ann_id_orig_generic.au; route-guide-id=annc1; announcement-number=629;add announcement id=630; announcement-file=ann_id_orig_generic_plus_dn.au; route-guide-id=annc1; announcement-number=630;add announcement id=631; announcement-file=ann_id_term_generic.au; route-guide-id=annc1; announcement-number=631;add announcement id=632; announcement-file=ann_id_term_generic_plus_dn.au; route-guide-id=annc1; announcement-number=632;
Subscriber Provisioning
Use the following procedure to assign the CoS and Seasonal Suspend features to the subscriber:
Step 1
change subscriber id=sub1; status=seasonal-suspend;Step 2
show subscriber id=sub1;
Provisioning Options for Inbound Call Treatment
This section explains how to provision inbound call treatment options.
Add a Referral DN to Inbound Seasonal Suspend Announcement
You can use this command to add a referral DN to the subscriber-feature-data table. If you do that, the system plays a seasonal suspend announcement that includes the referral DN, entered as value1 in this command. The value for value1 must be a valid DN and must be entered without any dashes (hyphens). If you do not enter this command, the system still plays the generic inbound seasonal suspend message.
add/change subscriber-feature-data sub-id=sub1; fname=SEAS; active=Y; type1=FDN1; value1=7895552345;
Note
Route to VMA Instead of Seasonal Suspend
You can provision the system to route all inbound calls to voicemail with the Voice Mail Always (VMA) feature. To enable this feature, you must take the following steps:
•
•
Caution
Provisioning Options for Outbound Call Treatment
Provision the Seasonal Suspend feature either to provide an announcement on disallowed outbound call attempts or to route disallowed outbound calls to the customer support DN. The parameters for these options are in the feature-config table:
•
•
Note
Note
Route to Seasonal Suspend Announcement
add feature-config fname=SEAS; type=route-to-cust-support-dn; datatype=boolean; value=N;add feature-config fname=SEAS; type=cust-support-dn; datatype=string; value=3455555555;Route to Customer Support DN
add feature-config fname=SEAS; type=route-to-cust-support-dn; datatype=boolean; value=Y;add feature-config fname=SEAS; type=cust-support-dn; datatype=string; value=3455555555;Turning Off (Deactivating) Seasonal Suspend
To turn off the seasonal suspend status for a subscriber, change the status to active) or any status other than seasonal-suspend).
change subscriber id=sub1; status=active;Troubleshooting, MR1.1 and Later
This section explains how to troubleshoot the following conditions:
Problems with Inbound Calls
If inbound calls are not routed to the seasonal suspend announcement, make sure that the Seasonal Suspend feature (fname<n>=SEAS) has been assigned to the default office service ID.
If an inbound call is supposed to receive an announcement but that does not happen, verify that the routing to the server is properly provisioned in the BTS 10200, that the server is in service, and that the appropriate announcement files are loaded on the server.
If inbound calls should receive an announcement that specifies the referral DN (a DN at which the subscriber can be reached) but the referral DN is not included in the announcement, verify that the subscriber-feature-data table has the following parameters provisioned for fname=SEAS:
•
•
Problems with Outbound Calls
After the subscriber status is set to seasonal-suspend, outbound calls should receive the seasonal suspend announcement. If this does not occur, make sure that you have also provisioned the correct CoS restriction (cos-restrict-id=special_cos_1 in the previous examples) in the feature-config table.
If the announcement for the outbound call is supposed to include the customer support DN but this DN is not included, check the provisioning in the feature-config table. Make sure that you have set route-to-cust-support-dn=N and that you have provisioned the correct DN for cust-support-dn.
If outbound calls are supposed to be routed to the customer support DN but they are not being routed properly, check the provisioning in the feature-config table. Make sure that you have set route-to-cust-support-dn=Y and that you have provisioned the correct DN for cust-support-dn. The value for cust-support-dn must be a valid DN and must be entered without any dashes (hyphens).
If outbound calls are supposed to receive an announcement but this does not occur, verify that the routing to the server is properly provisioned in the BTS 10200, that the server is in service, and that the appropriate announcement files are loaded on the server.
SIP Triggers
The following subsections provide the necessary steps to provision Session Initiation Protocol (SIP) Triggers for NCS and MGCP subscribers.
Beginning in Release 5.0, Maintenance Release 1 (MR1), these provisioning steps are also applicable for SIP endpoints (SIP subscribers).
Note
Tip
Office Provisioning
Step 1
add ca-config TYPE=EMG-ROUTE-TO-AS; DATATYPE=BOOLEAN;value=YStep 2
add SIP_TIMER_PROFILE ID=STP;MIN_SE=200;SESSION_EXPIRES_DELTA_SECS=500;Step 3
add softsw_tg_profile ID=trigger; PROTOCOL_TYPE=SIP; SESSION_TIMER_ALLOWED=Y; SIP_TIMER_PROFILE_ID=STP; USE_PAI_HDR_FOR_ANI=Y; ENABLE_SIP_TRIGGER=Y;REFER-ALLOWED=YStep 4
add trunk_grp ID=965;TG_TYPE=SOFTSW;SOFTSW_TSAP_ADDR=sia-SYS92CA146.ipclab.cisco.com; dial_plan_id=tb92; TG_PROFILE_ID=trigger; POP_ID=tb92; CALL_AGENT_ID=CA146; ROUTE_HEADER_HOSTNAME_PART=sj-prica21; ENABLE_ROUTE_HEADER=YStep 5
add route ID=SS_RTE_965;TGN_1_ID=965;Step 6
add route_guide ID=SS_RTE_GUIDE_965;POLICY_TYPE=ROUTE;POLICY_ID=SS_RTE_965;Step 7
add destination DEST_ID=DEST_965; CALL_TYPE=LOCAL; ROUTE_TYPE=ROUTE; ROUTE_GUIDE_ID=SS_RTE_GUIDE_965;Step 8
control trunk_grp id=965;mode=forced;target-state=ins;Step 9
add sip_element tsap_addr=sia-SYS92CA146.ipclab.cisco.comStep 10
add sip-trigger-profile id=vdial+noivr; route_guide_id=60001; AS_ROUTE_HEADER_USER=vdial+noivr; NEXT_ROUTE_HEADER_HOSTNAME=sia-SYS92CA146.ipclab.cisco.comadd sip-trigger-profile id=vdial+refer; route_guide_id=965; AS_ROUTE_HEADER_USER=vdial+refer; NEXT_ROUTE_HEADER_HOSTNAME=sia-SYS92CA146.ipclab.cisco.comadd sip-trigger-profile id=vdial+refer_sub; route_guide_id=965; AS_ROUTE_HEADER_USER=vdial+refer_sub; NEXT_ROUTE_HEADER_HOSTNAME=sia-SYS92CA146.ipclab.cisco.comadd sip-trigger-profile id=vdial+norm_media; route_guide_id=965; AS_ROUTE_HEADER_USER=vdial+normal_media; NEXT_ROUTE_HEADER_HOSTNAME=sia-SYS92CA146.ipclab.cisco.comadd sip-trigger-profile id=sc; route_guide_id=965; AS_ROUTE_HEADER_USER=sc; NEXT_ROUTE_HEADER_HOSTNAME=sia-SYS92CA146.ipclab.cisco.comStep 11
add feature fname=OHD; tdp1=collected_information; tid1=ohd_trigger; ttype1=R; tdp2=o_exception; tid2=reroute_trigger; ttype2=R; tdp3=collected_information; tid3=vertical_service; ttype3=R; feature_server_id=FSPTC235;
Note
Step 12
add feature fname=TAT_1; tdp1=TERMINATION_ATTEMPT_AUTHORIZED;tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R;feature-server-id=FSPTC235;add feature fname=TAT_2; tdp1=TERMINATION_ATTEMPT_AUTHORIZED;tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R;feature-server-id=FSPTC235;
Note
Step 13
add service id=svc_ohd; fname1=OHD;add service id=svc_tat; fname1=TAT_1; fname2=TAT2_2
Subscriber Provisioning
Note
Note
Step 1
add subscriber ID=sub_1; CATEGORY=INDIVIDUAL; NAME=SipSub1; STATUS=ACTIVE; LANGUAGE=english;BILLING-DN=469-555-1111; DN1=469-555-1111; RING-TYPE-DN1=1; SUB-PROFILE-ID=sub_profile;TERM-TYPE=SIP; AOR-ID=4695551111@cisco.com; privacy=user;Step 2
change subscriber id=sub_1; offhook_trigger_type=ohd; OHD_TIMERr=5;add sip-trigger-profile id=test; route_guide_id=SS_RTE_GUIDE_965;CA_ROUTE_HEADER_HOSTNAME_PART=sia-sysCA21CA1460.sfanbts. cisco.com;NO_RESPONSE_TIMER=5add subscriber-sip-trigger-profile fname=OHD; sip_trigger_profile_id=test;sub_id=sub_1;add subscriber-sip-trigger-profile fname=TAT_1; sip_trigger_profile_id=test;sub_id=sub_1;add subscriber-sip-trigger-profile fname=TAT_2; sip_trigger_profile_id=test;sub_id=sub_1;add sub-service-profile sub_id=sub_1; service_id=svc_tatadd sub-service-profile sub_id=sub_1; service_id=svc_ohd
Provisioning Resources
IVR Provisioning
With the SIP triggers feature, an IVR resource must be provisioned. The steps below provide an example of provisioning IVR capability on the Cisco BTS 10200 Softswitch.
Step 1
add mgw-profile ID=ms_profile; VENDOR=IPUnity; PACKET-TYPE=IP; AAL1=N; AAL2=N; AAL5=N; PVC=N; SVC=N; SPVC=N; MGCP-VERSION=MGCP_1_0;TERMINATION-PREFIX=ivr/;add mgw id=ipunity_ms; tsap-addr=ms-ipunity2.ipclab.cisco.com; call-agent-id=CA146; mgw-profile-id=ms_profile;call-agent-control-port=2427;type=tgw;add annc-tg-profile id=annc_tg_p; annc=N; ivr=Y; auto_answer=Y; LOCAL_TRUNK_SELECTION=N;add trunk-grp id=20; call-agent-id=CA146; tg_type=annc; tg-profile-id=annc_tg_p;MGCP-PKG-TYPE=ANNC_CABLE_LABS;add termination prefix=ivr/; port-start=1; port-end=30; type=trunk;mgw-id=ipunity_ms;add trunk cic-start=1; cic-end=30; tgn-id=20; termination-prefix=ivr/; termination-port-start=1; termination-port-end=30; mgw-id=ipunity_ms;control mgw; mode=forced; target-state=INS; id=ipunity_ms;control trunk-grp; id=20; mode=forced; target-state=INS;equip trunk-termination; tgn-id=20; cic=all;control trunk-termination; tgn-id=20; cic=all; mode=forced; target-state=INS;Step 2
add route id=ivr_rte; tgn1-id=20;add route-guide id=def_ivr_rg; policy_id=ivr_rte; policy_type=ROUTE;add ca-config type=DEFAULT-IVR-ROUTE-GUIDE-ID; datatype=string; value=def_ivr_rg;Step 3
Note
This recording is stored as an audio file with the filename 'sip_trigger_barge_in.wav' which is used in the last step of this example.add ivr_script_profile FNAME=OHD; IVR_ACCESS_MODE=IVR; IVR_ROUTE_GUIDE_ID=def_ivr_rg; IVR_SCRIPT_PKG_TYPE=BAU;add language id=def;add audio_seq id=GFL_INVOCATION; LANGUAGE_ID=def; SEQ=sip_trig_barge_in;add audio_segment id=sip_trig_barge_in; TYPE=PHYSICAL; URL=file://sip_trigger_barge_in.wav; description=We are sorry. Your premier voice service is unavailable. You may dial a number at any time or hangup;
Centrex Provisioning
The SIP triggers feature is not supported for Centrex subscribers.
MLHG Provisioning
MLHG provisioning is similar to subscriber provisioning.
Speed Call (1-Digit and 2-Digit) and Activation
Speed Call (SC) allows you to dial selected numbers by assigning either a one digit or two digit abbreviated code to frequently called numbers. One-digit speed dialing accomodates eight numbers (2 through 9) for POTS and basic business group (BBG) customers, while two-digit speed dialing accomodates thirty numbers (20 through 49) for long distance, local, international, or emergency numbers.
Tip
The following subsections identify necessary steps for the Speed Call feature to be offered.
Office Provisioning
Step 1
add feature fname=SC1D_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=One Digit Speed Call Activation; feature_server_id=FSPTC235;Step 2
add feature fname=SC2D_ACT; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Two Digit Speed Call Activation; feature_server_id=FSPTC235;Step 3
add feature fname=SC1D; tdp1=COLLECTED_INFORMATION; tid1=SC1D_TRIGGER; ttype1=R; description=One Digit Speed Call; feature_server_id=FSPTC235;Step 4
add feature fname=SC2D; tdp1=COLLECTED_INFORMATION; tid1=SC2D_TRIGGER; ttype1=R; description=Two Digit Speed Call; feature_server_id=FSPTC235;Step 5
add vsc digit_string=*74;fname=SC1D_ACT;Step 6
add vsc digit_string=*75;fname=SC2D_ACT;Step 7
add service id=499; fname1=SC1D_ACT; fname2=SC2D_ACT; fname3=SC1D; fname4=SC2D;Step 8
change digit-map id=default; digit-pattern=0T|00|[2-9]11|[2-9]xx[2-9]xxxxxx| 1[2-9]xx[2-9]xxxxxx|0[2-9]xx[2-9]xxxxxx|011xxxxxx.T|01xxxxxx.T|101xxxx|#|*xx|11xx| xxxxxxxxxxxxxxxxxx|[2-9]#|[24]x#|[29]T|[2-4]xT;
Subscriber Provisioning
Step 1
add sub-service-profile sub-id=sub_1_4; service-id=499; priority=4;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Alternate Provisioning Method
SC1D can alternately be provisioned or removed by creating an entry in the SC1D table.
Use a CLI command similar to the following to provision the SC1D code:
add sc1d sub-id=sub_1; dnx=4692551001;
Use a CLI command similar to the following to remove provisioning for the SC1D code:
add sc1d sub-id=sub_1; dnx=NULL;
Note
Note
SC2D can alternately be provisioned or removed by creating an entry in the SC2D table.
Use a CLI command similar to the following to provision the SC2D code:
add sc2d sub-id=sub_1; dnx=4692551001;
Use a CLI command similar to the following to remove provisioning for the SC2D code:
add sc2d sub-id=sub_1; dnx=NULL;
Note
Note
Split Numbering Plan Area
This feature allows the conversion of a specific Numbering Plan Area (NPA) or a NPA-NXX to a new NPA via a series of 4 command steps, as described below. This feature was designed to facilitate the operation of dividing an area served by one NPA into smaller areas served by different NPAs (such action is required when an area is running out of telephone numbers based on a particular NPA and new NPAs are introduced).
For the Split NPA procedure to be initiated, first a permissive period is established. During this period, the numbers that are scheduled to be served by a new NPA should be able to be reached using both the old NPA and the new NPA. Once the permissive period ends, these numbers should be reached only through the new NPA (these numbers cannot be reached via the old NPA, and the old NPA dialing plan becomes vacant and available for assignment to different subscribers).
Tip
In the following example, we split 972-516 to 214-516:
Step 1
add split-npa old-npa=972-516; new-npa=214-516; start-date=2003-10-01; end-date=2003-12-01;Step 2
change split-npa old-npa=972-516; duplicate_records=Y;Step 3
change split-npa old-npa=972-516; update-ani=Y;After the end date, perform the cleanup action to delete records with the old NPA.change split-npa old-npa=972-516; cleanup=Y;
T.38 Fax Relay
The T.38 Fax Relay feature provides standards-based fax relay protocol support on Cisco 3600 series, and Cisco MC3810 series and C5850 multiservice gateways. The Cisco proprietary fax relay solution is sometimes not an ideal solution for enterprise and service provider customers who have implemented a mixed vendor network. Because the T.38 Fax Relay protocol is standards based, Cisco gateways and gatekeepers will not be able to interoperate with third-party T.38-enabled gateways and gatekeepers in a mixed vendor network where realtime fax relay capabilities are required.
This section explains how to configure T.38 fax relay call agent mode across several interfaces.
Note
Tip
Configuring T.38 Fax Relay
This section describes the steps required to configure T.38 fax relay for different trunk groups, gateways and tables.
Administrator may configure profile information on the Cisco BTS 10200 for each managed MGCP/NCS endpoint to:
•
•
•
•
CLI Examples
Provisioning the MGCP / NCS / TGCP Interface T38_ FXR _LOOSE _SUPP
Step 1
•
Step 2
•
Step 3
•
Step 4
•
•
•
Cisco BTS 10200 SIP interface always encodes using RFC-3407.
Provisioning the MGCP / NCS / TGCP Interface SDP-CAP-ENCODE-TYPE
Step 1
•
Step 2
•
Step 3
•
Step 4
•
Cisco BTS 10200 SIP interface always encodes using RFC-3407.
Provisioning the QoS Table
Step 1
Step 2
Step 3
Step 4
Step 5
•
•
Step 6
Provisioning H.323 Interface
Step 1
–
–
–
Provisioning H.323 Interface: CA-CONFIG Table
Step 1
Step 2
Default 14.4
Step 3
Default 200
Step 4
Default 72
Provisioning CA-CONFIG Table
Step 1
T.38 codec packetization period.
Default = 20.
Temporary Disconnect
The Temporary Disconnect (TDISC) feature allows a service provider to temporarily disconnect a subscriber from the phone service for non-payment or other special reasons.
Note
The following procedure performs a TDISC for a subscriber.
Step 1
add/change cos-restrict id=tdisc-restricts;Step 2
add/change pop id=new; temp-disc-cos-restrict-id=tdisc-restricts;Step 3
add/change pop id=new; temp-disc-service-allowed=N;Step 4
Note
add/change trigger-nod-escape-list tid=COS_TRIGGER; nod=EMG;Step 5
add release-cause id=1270; annc-id=570;add release-cause id=151; annc-id=20;Step 6
add announcement ID=570; TYPE=SYSTEM; SEND_ANSWER=N; NUM_REPEAT=1; ANNOUNCEMENT_FILE=ann_id_570.au; ROUTE_GUIDE_ID=annc1; ANNOUNCEMENT_NUMBER=20; ANNOUNCEMENT_TIMER=180;add announcement ID=20; TYPE=SYSTEM; SEND_ANSWER=N; NUM_REPEAT=1; ANNOUNCEMENT_FILE=ann_id_20.au; ROUTE_GUIDE_ID=annc1; ANNOUNCEMENT_NUMBER=20; ANNOUNCEMENT_TIMER=180;Step 7
If "office-service" is the name for the default office-service configured in CA-CONFIG, ensure availability of the COS feature in the default office service.
change service id=office-service; fname1=COS;
Subscriber Provisioning
Step 1
Add/change subscriber id=sub1; status=TEMP-DISCONNECTED;
Centrex Provisioning
Centrex provisioning is similar to subscriber provisioning and basic Centrex provisioning.
MLHG Provisioning
MLHG provisioning is similar to subscriber provisioning
Terminal and Group Make Busy Services
Use the following procedure to configure the TMB and GMB features. The procedure assumes you have already provisioned the MLHG.
Note
Step 1
fname=TMBA;TDP1=COLLECTED_INFORMATION;TID1=VERTICAL_SERVICE_CODE;TTYPE1=R;FEATURE-SERVER-I D=FSPTC235;GRP_FEATURE=N;DESCRIPTION=Terminal Make Busy Activation for MLHGfname=TMBD;TDP1=COLLECTED_INFORMATION;TID1=VERTICAL_SERVICE_CODE;TTYPE1=R;FEATURE-SERVER-I D=FSPTC235;GRP_FEATURE=N;DESCRIPTION=Terminal Make Busy Deactivation for MLHGfname=GMBA;TDP1=COLLECTED_INFORMATION;TID1=VERTICAL_SERVICE_CODE;TTYPE1=R;FEATURE-SERVER-I D=FSPTC235;GRP_FEATURE=Y;DESCRIPTION=Group Make Busy Activation for MLHGfname=GMBD;TDP1=COLLECTED_INFORMATION;TID1=VERTICAL_SERVICE_CODE;TTYPE1=R;FEATURE-SERVER-I D=FSPTC235;GRP_FEATURE=Y;DESCRIPTION=Group Make Busy Deactivation for MLGHStep 2
add vsc fname=TMBA;DIGIT_STRING=*53;add vsc fname=TMBD;DIGIT_STRING=*54;add vsc fname=GMBA;DIGIT_STRING=*55;add vsc fname=GMBD;DIGIT_STRING=*56;Step 3
add cdp id=tb14-18;digit-string=*53;nod=vsc;fname=TMBA;cat-string=1111111111111111;add cdp id=tb14-18;digit-string=*54;nod=vsc;fname=TMBD;cat-string=1111111111111111;add cdp id=tb14-18;digit-string=*55;nod=vsc;fname=GMBA;cat-string=1111111111111111;add cdp id=tb14-18;digit-string=*56;nod=vsc;fname=GMBD;cat-string=1111111111111111;Step 4
add service id=mbz;fname1=TMBA;fname2=TMBD;fname3=GMBA;fname4=GMBD;Step 5
add subscriber-service-profile sub-id=214-624-1809;service-id=mbz;
add subscriber-service-profile sub-id=214-624-1810;service-id=mbz;
add subscriber-service-profile sub-id=214-625-1813;service-id=mbz;
add subscriber-service-profile sub-id=214-622-1801;service-id=mbz;
add subscriber-service-profile sub-id=214-623-1805;service-id=mbz;
add subscriber-service-profile sub-id=214-623-1806;service-id=mbz;
Three-Way Calling
Three-Way Calling(TWC) is a service that permits three people at three different locations to talk together at the same time. Whether you make or receive the initial call, you can use TWC to add a third person to the call. You can continue the call if either of the other parties hangs up. However, when you hang up, the other two people will be disconnected because you control the TWC service.
Once a TWC is initiated, all the parties in the call can simultaneously hear what the other parties are communicating.
Tip
The following subsections identify necessary steps for the TWC feature to be offered.
Office Provisioning
Step 1
add feature FNAME=TWC; TDP1=O_MID_CALL; TID1=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE1=R; TDP2=T_MID_CALL; TID2=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Three-Way Calling Feature;Step 2
add service id=2; FNAME1=TWC;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=sub_1; service-id=2;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Three-Way Calling Deluxe
Three-Way Calling Deluxw (TWCD) allows a user to add a third party to an existing two party conversation without operator assistance. The user subscribed to TWCD can use this feature regardless of which party originated the two-party call.
Tip
The following subsections identify necessary steps for the TWCD feature to be offered.
Office Provisioning
Step 1
add feature FNAME=TWCD; TDP1=O_MID_CALL; TID1=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE1=R; TDP2=T_MID_CALL; TID2=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Residential Three-Way Calling Deluxe Feature;Step 2
add service id=2; FNAME1=TWCD;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub_id=sub_1; service-id=2;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Usage Sensitive Three-Way Calling
Usage Sensitive Three-Way Calling (USTWC) allows a user to add a third party to an existing two party conversation. It provides all the functionality of TWC without requiring the user to subscribe to the service.
Tip
The following subsections identify necessary steps for the USTWC feature to be offered.
Office Provisioning
Step 1
add feature FNAME=USTWC; TDP1=O_MID_CALL; TID1=O_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE1=R; TDP2=T_MID_CALL; TID2=T_SWITCH_HOOK_FLASH_IMMEDIATE; TTYPE2=R; FEATURE_SERVER_ID=FSPTC235; DESCRIPTION=Usage Sensitive Three-Way Calling Feature;Step 2
add service id=999; FNAME1=USTWC;Step 3
add ca-config TYPE=DEFAULT-OFFICE-SERVICE-ID; DATATYPE=STRING; VALUE=999;
Subscriber Provisioning
Step 1
change subscriber id=sub_1@abcd; USAGE-SENS=Y;Step 2
change subscriber-feature-data sub-id=subscriber_1; fname=USTWC; type1=DENIED value1=Y;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Voice Mail, Voice Mail Always, and Voice Mail Access
The stand-alone call redirection to voice mail feature forwards calls when a subscriber is either busy, away from the phone, or sends calls directly to voice mail where the caller can record a message. The subscriber may later retrieve the message from the voice mail server.
Note
The following subsections identify necessary steps for this feature to be offered
Office Provisioning Voice Mail Activation (VM_ACT), Deactivation (VM_DEACT), and Access (VM_ACCESS)
Step 1
add/change feature FNAME=VM_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 2
add/change feature FNAME=VM_DEACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 3
add/change feature FNAME=VM_ACCESS; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 4
add/change feature FNAME=VM; TDP1=T_BUSY; TID1=T_BUSY; TTYPE1=R; TDP2=CALL_ACCEPTED; TID2=CALL_ACCEPTED; TTYPE2=R;TYPE1=TO; VALUE1=30; TYPE2=MCF; VALUE2=Y; FNAME1=VM_ACT; FNAME2=VM_DEACT; FEATURE_SERVER_ID=FSPTC235;Step 5
add/change vsc; fname=VM_ACT; DIGIT_STRING=*210;add/change vsc; fname=VM_DEACT; DIGIT_STRING=*211;add/change vsc; fname=VM_ACCESS; DIGIT_STRING=*222;Step 6
add/change service id=vm_busy_na; FNAME1=VM; fname2=VM_ACCESS;
Office Provisioning Voice Mail Always
Step 1
add/change feature FNAME=VMA_ACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 2
add/change feature FNAME=VMA_DEACT; TDP1=COLLECTED_INFORMATION; TID1=VERTICAL_SERVICE_CODE; TTYPE1=R; FEATURE_SERVER_ID=FSPTC235;Step 3
add/change feature FNAME=VMA; TDP1=TERMINATION_ATTEMPT_AUTHORIZED; TID1=TERMINATION_ATTEMPT_AUTHORIZED; TTYPE1=R; TYPE1=MCF; VALUE1=Y; FNAME1=VMA_ACT; FNAME2=VMA_DEACT; FEATURE_SERVER_ID=FSPTC235;Step 4
add/change vsc; fname=VMA_ACT; DIGIT_STRING=*220;add/change vsc; fname=VMA_DEACT; DIGIT_STRING=*221;Step 5
add/change service id=vm_always;FNAME1=VMA; fname2=VM_ACCESS;
Provisioning Resources
The following table shows how to create the app-server table for a subscriber. The next step shows the multiple ways by which this can be associated to the subscriber. The app-server can be associated to the subscriber through four tables:
•
•
•
•
Step 1
add app-server; id=vm_as; APP_SERVER_TYPE=VM; APP_SERVER_DN=9722331287; APP_SERVER_ACCESS_DN=9722331287; DESCRIPTION=VM App Server;Step 2
change sub; id=<sub>; VOICE_MAIL_ID=vm_as;Step 3
change sub-profile; id=<sub-profile>; VOICE_MAIL_ID=vm_as;Step 4
change pop; id=<pop>; VOICE_MAIL_ID=vm_as;Step 5
Add ca-config; type=default-voice-mail-id; value=vm-as;
Subscriber Provisioning
Step 1
add/change sub-service-profile; sub-id=[sub]; service-id=vm_always;Step 2
add/change sub-service-profile; sub-id=[sub]; service-id=vm_busy_na;
Centrex Provisioning
Step 1
add/change cdp; id=[cdp-id]; fname=VM_ACT; DIGIT_STRING=*210; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; id=[cdp-id]; fname=VM_DEACT; DIGIT_STRING=*211; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; id=[cdp-id]; fname=VM_ACCESS; DIGIT_STRING=*222; nod=VSC; CAT_STRING=1111111111111111;Step 2
add/change cdp; fname=VMA_ACT; DIGIT_STRING=*220; nod=VSC; CAT_STRING=1111111111111111;add/change cdp; fname=VMA_DEACT; DIGIT_STRING=*221; nod=VSC; CAT_STRING=1111111111111111;
Alternate Way of Activating and Deactivating VM and VMA
Step 1
add/change sub-feature-data; sub-id=sub1; fname=VM; ACTIVE=Y;Step 2
add/change sub-feature-data; sub-id=sub1; fname=VM; ACTIVE=N;Step 3
add/change sub-feature-data; sub-id=sub1; fname=VMA; ACTIVE=YStep 4
add/change sub-feature-data; sub-id=sub1; fname=VMA; ACTIVE=N;
Warmline
The Warmline feature is a combination of a hotline and a regular telephone line.
Tip
The following subsections identify necessary steps for the Warmline feature to be offered.
Office Provisioning
Step 1
add feature FNAME=WARMLINE; tdp1=O_ATTEMPT_AUTHORIZED; tid1=O_ATTEMPT_AUTHD; ttype1=R; feature_server_id=FSPTC235; description=Warmline; grp_feature=N;Step 2
add service id=special-srv; fname1=WARMLINE;
Note
Step 3
change feature FNAME=WARMLINE; type1=TO; value1=6;
Provisioning Resources
Step 1
add mgw-profile id=plano-iad; mgcp-version=MGCP_1_0;
Note
Step 2
Add/change mgw-profile id=plano-iad; mgcp-to-supp=Y;
Subscriber Provisioning
Step 1
add subscriber-service-profile sub-id=sub1_plano.com; service-id=special-srv;Step 2
add subscriber-feature-data sub-id=sub1_plano.com; fname=WARMLINE; type1=FDN1; value1=9726712355;Centrex and MLHG provisioning is similar to subscriber provisioning as described above.
Time and Weather Number
To set up a time and weather number, complete the following steps:
Step 1
add dial-plan id=dp1; digit-string=301=844; REQD_DIGITS=10; DEST_ID=inter-rte-3333;
Note
Step 2
add special-call-type digit-string=844; call-type=TW; description=Time and Weather;Step 3
CLI> show special-call-type digit_string=844;Reply: Success: 1 entry found.DIGIT_STRING=844;CALL_TYPE=TWDESCRIPTION=Time and Weather
Provision an Office Service ID for a POP
If office-service-id is not provisioned in the POP table, the system uses the default-office-service-id provisioned in the Ca-config table.
Tip
Use the following procedure to provision a specific office service ID for an individual POP:
Step 1
add service id=noLNP; fname1-8xx; fname2=911; fname3=USTWC;Step 2
change pop id=pop1; office-service-id=noLNP;
