Provisioning Guide
Appendix D - Factory Installed Scripts
Download this chapter
Appendix D - Factory Installed ScriptsAppendix D - Factory Installed Scripts
Download the complete book
Provisioning Guide - Book Length PDFProvisioning Guide - Book Length PDF (PDF - 6 MB)
 Feedback

Table Of Contents

Factory-Installed Scripts

Feature Provisioning Scripts

Media Gateway Profile Scripts

Cisco UBR Profile

Cisco 2600 Profile

Cisco AS5400 Profile

Telogy Profile

Voice Interworking Service Module Profile

Voice Interworking Service Module Trunking Gateway Profile

Default Digit Maps

7-Digit Local Dialing

10-Digit Local Dialing

7- or 10-Digit Local Dialing


Factory-Installed Scripts

Revised: May 31, 2010, OL-12777-12

This appendix details the factory-set scripts for the Feature Server and various media gateways.

Feature Provisioning Scripts

The features in Table D-1 are preprovisioned during installation. Note that the feature-server-id token is replaced with the actual Feature Server ID.

Table D-1 Factory Installed Feature Scripts 

Feature Name
Provisioning Script

Anonymous Call Rejection

add feature fname=ACR; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Anonymous Call Rejection; feature_server_id=FSPTC719;

Call Forwarding Busy

add feature fname=CFB; tdp1=T_BUSY; tdp2=COLLECTED_INFORMATION; tid1=T_BUSY; tid2=VERTICAL_SERVICE_CODE; ttype1=R; fname1=CFBVA1 ; fname2=CFBVD; description=Call Forwarding Busy; feature_server_id=FSPTC719;

Call Forwarding Busy Activation

add feature fname=CFBVA; vsc=*90; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; type1=INTL; value1=Y; description=Call Forwarding Busy Activation; feature_server_id=FSPTC719;

Call Forwarding Busy Deactivation

add feature fname=CFBVD; vsc=*91; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Call Forwarding Busy Deactivation; feature_server_id=FSPTC719;

Call Forwarding No Answer

add feature fname=CFNA; tdp1=CALL_ACCEPTED; tdp2=COLLECTED_INFORMATION; tid1=CALL_ACCEPTED; tid2=VERTICAL_SERVICE_CODE; ttype1=R; fname1=CFNAVA2 ; fname2=CFNAVD; type1=TO; value1=30; description=Call Forwarding No Answer TO=Timeout; feature_server_id=FSPTC719;

Call Forwarding No Answer Activation

add feature fname=CFNAVA; vsc=*92; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; type1=INTL; value1=Y; description=CFNA Variable Activation; feature_server_id=FSPTC719;

Call Forwarding No Answer Deactivation

add feature fname=CFNAVD; vsc=*93; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Call Forwarding No Answer Variable Deactivation; feature_server_id=FSPTC719;

Call Forwarding Unconditional

add feature fname=CFU; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tdp2=COLLECTED_INFORMATION; tid1=TERMINATION_ATTEMPT_AUTHORIZED; tid2=VERTICAL_SERVICE_CODE; ttype1=R; fname1=CFUA; fname2=CFUD; type1=MCF; value1=Y; type2=RR; value2=Y; description=Call Forwarding Unconditional MCF=multiple call forwarding allowed, RR=ring reminder; feature_server_id=FSPTC719;

Call Forwarding Unconditional Activation

add feature fname=CFUA; vsc=*72; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; type1=INTL; value1=Y; description=CFU Activation, INTL=CF to international DN allowed; feature_server_id=FSPTC719;

Call Forwarding Unconditional Deactivation

add feature fname=CFUD; vsc=*73; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Call Forwarding Unconditional Deactivation; feature_server_id=FSPTC719;

Call Hold

add feature fname=CHD; tdp1=O_MID_CALL; tdp2=T_MID_CALL; tid1=O_SWITCH_HOOK_FLASH_IMMEDIATE; tid2=T_SWITCH_HOOK_FLASH_IMMEDIATE; ttype1=R; description=Call Hold; feature_server_id=FSPTC719;

Call Transfer

add feature fname=CT; tdp1=O_MID_CALL; tdp2=T_MID_CALL; tid1=O_SWITCH_HOOK_FLASH_IMMEDIATE; tid2=T_SWITCH_HOOK_FLASH_IMMEDIATE; ttype1=R; description=Call Transfer; feature_server_id=FSPTC719;

Call Waiting

add feature fname=CW; tdp1=T_BUSY; tid1=T_BUSY; ttype1=R; description=Call Waiting; feature_server_id=FSPTC719;

Caller ID with Call Waiting

add feature fname=CIDCW; tdp1=T_BUSY; tid1=T_BUSY; ttype1=R; description=Caller Id with Call Waiting; feature_server_id=FSPTC719;

Calling Identity Delivery

add feature fname=CIDS; vsc=*82; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Calling Identity Delivery; feature_server_id=FSPTC719;

Calling Name Delivery

add feature fname=CNAM; tdp1=FACILITY_SELECTED_AND_AVAILABLE; tid1=TERMINATION_RESOURCE_AVAILABLE; ttype1=R; description=Calling Name; feature_server_id=FSPTC719;

Calling Name Delivery Blocking

add feature fname=CNAB; vsc=*95; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Calling Name Delivery Blocking; feature_server_id=FSPTC719;

Calling Number Delivery

add feature fname=CND; tdp1=FACILITY_SELECTED_AND_AVAILABLE; tid1=TERMINATION_RESOURCE_AVAILABLE; ttype1=R; description=Calling number delivery; feature_server_id=FSPTC719;

Calling Number Delivery Blocking

add feature fname=CNDB; vsc=*67; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Calling Number Delivery Blocking (toggles the privacy indicator)'; feature_server_id=FSPTC719;

Cancel Call Waiting

add feature fname=CCW; vsc=*70; tdp1=COLLECTED_INFORMATION; tid1=VERTICAL_SERVICE_CODE; ttype1=R; description=Cancel Call Waiting; feature_server_id=FSPTC719;

Class of Service Screening

add feature fname=COS; tdp1=COLLECTED_INFORMATION; tid1=COS_TRIGGER; ttype1=R; description=Class of service screening; feature_server_id=FSPTC719;

Customized Dial Plan

add feature fname=CDP; tdp1=COLLECTED_INFORMATION; tid1=CUSTOMIZE_DIALING_PLAN; ttype1=R; description=Customize Dial Plan; feature_server_id=FSPTC719;

Emergency Service

add feature fname=911; tdp1=COLLECTED_INFORMATION; tid1=911_TRIGGER; ttype1=R; description=Emergency Service; feature_server_id=FSPTC719;

Incoming SFG

add feature fname=ISFG; tdp1=TERMINATION_ATTEMPT_AUTHORIZED; tid1=TERMINATION_ATTEMPT_AUTHORIZED; ttype1=R; description=Incoming SFG; feature_server_id=FSPTC719;

LIDB query

add feature fname=LIDB; tdp1=TERMINATION_ATTEMPT; tid1=CNAM; ttype1=R; description= LIDB query for the CNAM feature; feature_server_id=FSAIN205;

Local Number Portability

add feature fname=LNP; tdp1=COLLECTED_INFORMATION; tid1=LNP_TRIGGER; ttype1=R; description=Local Number Portability; feature_server_id=FSAIN519;

Outgoing SFG

add feature fname=OSFG; tdp1=ROUTE_SELECTED; tid1=ROUTE_SELECTED; ttype1=R; description=Outgoing SFG; feature_server_id=FSPTC719;

Three-Way Call

add feature fname=TWC; tdp1=O_MID_CALL; tdp2=T_MID_CALL; tid1=O_SWITCH_HOOK_FLASH_IMMEDIATE; tid2=T_SWITCH_HOOK_FLASH_IMMEDIATE; ttype1=R; description=Three way call; feature_server_id=FSPTC719;

Toll-Free Service

add feature fname=8XX; tdp1=COLLECTED_INFORMATION; tid1=SPECIFIC_DIGIT_STRING; ttype1=R; description=Toll Free Number; feature_server_id=FSAIN519;

Usage Sensitive Three-Way Calling

add feature fname=USTWC; tdp1=O_MID_CALL; tdp2=T_MID_CALL; tid1=O_SWITCH_HOOK_FLASH_IMMEDIATE; tid2=T_SWITCH_HOOK_FLASH_IMMEDIATE; ttype1=R; description=Usage Sensitive Three Way Call; feature_server_id=FSPTC719;

1 Do not provision fname1 and fname2 if CFB Variable Activation / Deactivation are not to be allowed.

2 Do not provision fname1 and fname2 if CFNA Variable Activation / Deactivation are not to be allowed.


Media Gateway Profile Scripts

This section details media gateway hardware factory-set profiles.

Cisco UBR Profile

The Cisco UBR is used as a residential gateway. The UBR has two terminations. 

add mgw-profile ID=Ubr1;

VENDOR=Cisco;

SILENT-SUPPRESS-SUPP=Y;

MGCP-VARIANT=MGCP_0_1;

RBK-ON-CONN-SUPP=N;

PACKET-TYPE=IP;

AAL1=N;

AAL2=N;

AAL5=N;

PVC=N;

SVC=N;

SPVC=N;

EC=N;

MPARTY-CONFERENCE=N;					#not used

MPARTY-3WAY=N;			#not used

NUM-PER-MPARTY=1;				#not used

NUM-OF-MPARTY=1;				#not used

LPTIME=10;

HPTIME=20;

ISDN=N;

DTMF=N;

MF=N;

FXO=N;

FXS=N;

FGD=N;

BACKHAUL-TYPE=RUDP;

SDP-ORIGFIELD-UNSUPP=Y;

SDP-SESSNAME-UNSUPP=Y;

SDP-EMAIL-UNSUPP=Y;

SDP-PHONE-UNSUPP=Y;

SDP-URI-UNSUPP=Y;

SDP-BANDWIDTH-UNSUPP=Y;

SDP-INFO-UNSUPP=Y;

SDP-TIME-UNSUPP=Y;

SDP-ATTRIB-UNSUPP=Y;

MGCP-ERQNT-UNSUPP=Y;

MGCP-HAIRPIN-UNSUPP=Y;

MGCP-QLOOP-UNSUPP=Y;

MGCP-3WAY-HSHAKE-UNSUPP=N;

MGCP-CONN-ID-AT-GW-UNSUPP=Y;

MGCP-CMD-SEQ-UNSUPP=Y;

TERMINATION-PREFIX=aaln/;

PORT-START=0;

DESCRIPTION=Cisco UBR;

Cisco 2600 Profile

The Cisco 2600 router is used as a residential gateway. 

add mgw-profile id=Cisco2600;

vendor=Cisco;

packet-type=IP;

mgcp-variant=MGCP_0_1;

aal1=n;

aal2=n;

aal5=n;

pvc=n;

svc=n;

spvc=n;

ec=n;

mparty-3way=n;	#not used

mparty-conference=n;	#not used

lptime=10;

hptime=20;

silent-suppress-supp=n;

rbk-on-conn-supp=n;

isdn=n;

dtmf=n;

mf=n;

fxo=n;

fgd=n;

mgcp-erqnt-unsupp=y;

mgcp-hairpin-unsupp=y;

mgcp-cmd-seq-unsupp=y;

description=cisco 2600 residential gateways



#	Cisco MC 3810 profile

# The Cisco Multiservice Access Concentrator MC 3810 is used as a residential gateway.

add mgw-profile id=cisco_3810;

vendor=cisco;

packet-type=ip;

mgcp-variant=MGCP_0_1;

aal1=no;

aal2=no;

aal5=no;

pvc=no;

svc=no;

spvc=no;

ec=n;

mparty-3way=n;	#not used

mparty-conference=n;	#not used

lptime=10;

hptime=20;

silent-suppress-supp=n;

rbk-on-conn-supp=n;

isdn=n;

dtmf=y;

mf=n;

fxo=n;

fgd=n;

mgcp-erqnt-unsupp=y;

mgcp-hairpin-unsupp=y;

mgcp-cmd-seq-unsupp=y;

description=cisco multiservice access concentrator - mc3810

Cisco AS5400 Profile

The Cisco AS5400 Media Gateway is used as a trunking gateway as well as an announcement server. The default profile applies to both types of gateways. 

add mgw-profile id=as5400;

vendor=Cisco;

packet-type=IP;

mgcp-variant=MGCP_0_1;

aal1=n;

aal2=n;

aal5=n;

pvc=n;

svc=n;

spvc=n;

ec=n;

mparty-3way=n;				#not used

mparty-conference=n;					#NOT USED

lptime=10;

hptime=20;

silent-suppress-supp=n;

rbk-on-conn-supp=n;

isdn=n;

dtmf=n;

mf=n;

fxo=n;

fgd=n;

mgcp-erqnt-unsupp=y;

mgcp-hairpin-unsupp=y;

mgcp-cmd-seq-unsupp=y;

mgcp-rsipstar-supp=y

description=cisco access server as5400 tgw profile

Telogy Profile

The Telogy is used as a residential gateway. The Telogy box supports two terminations. 

add mgw-profile id=Telogy1;

VENDOR=Telogy;

SILENT-SUPPRESS-SUPP=Y;

MGCP-VARIANT=NCS_1_0;

RBK-ON-CONN-SUPP=N;

PACKET-TYPE=IP;

AAL1=N;

AAL2=N;

AAL5=N;

PVC=N;

SVC=N;

SPVC=N;

EC=N;

MPARTY-CONFERENCE=N;

MPARTY-3WAY=N;

NUM-PER-MPARTY=1;

NUM-OF-MPARTY=1;

LPTIME=10;

HPTIME=20;

ISDN=N;

DTMF=N;

MF=N;

FXO=N;

FXS=N;

FGD=N;

BACKHAUL-TYPE=RUDP;

SDP-ORIGFIELD-UNSUPP=Y;

SDP-SESSNAME-UNSUPP=Y;

SDP-EMAIL-UNSUPP=Y;

SDP-PHONE-UNSUPP=Y;

SDP-URI-UNSUPP=Y;

SDP-BANDWIDTH-UNSUPP=Y;

SDP-INFO-UNSUPP=Y;

SDP-TIME-UNSUPP=Y;

SDP-ATTRIB-UNSUPP=Y;

MGCP-ERQNT-UNSUPP=Y;

MGCP-HAIRPIN-UNSUPP=Y;

MGCP-QLOOP-UNSUPP=Y;

MGCP-3WAY-HSHAKE-UNSUPP=N;

MGCP-CONN-ID-AT-GW-UNSUPP=N;

MGCP-CMD-SEQ-UNSUPP=N;

TERMINATION-PREFIX=aaln/;

PORT-START=1;

DESCRIPTION=Telogy;

Voice Interworking Service Module Profile

The following media gateway profile provides an example for gateways with a voice interworking service module (VISM): 


ID=C0401-VISM21

VENDOR=Cisco

SILENT-SUPPRESS_SUPP=N

MGCP-VARIANT=NONE

RBK-ON-CONN_SUPP=Y

PACKET-TYPE=IP

AAL1=N

AAL2=N

AAL5=N

PVC=N

SVC=N

SPVC=N

EC=Y

MPARTY-CONFERENCE=Y

MPARTY-3WAY=Y

NUM-PER-MPARTY=3

NUM-OF-MPARTY=3

LPTIME=20

HPTIME=20

ISDN=N

DTMF=N

MF=Y

FXO=N

FXS=N

FGD=N

BACKHAUL-TYPE=RUDP

SDP-ORIGFIELD-UNSUPP=N

SDP-SESSNAME-UNSUPP=N

SDP-EMAIL-UNSUPP=N

SDP-PHONE-UNSUPP=N

SDP-URI-UNSUPP=N

SDP-BANDWIDTH-UNSUPP=N

SDP-INFO-UNSUPP=N

SDP-TIME-UNSUPP=N

SDP-ATTRIB-UNSUPP=N

MGCP-ERQNT-UNSUPP=N

MGCP-HAIRPIN-UNSUPP=Y

MGCP-QLOOP-UNSUPP=N

MGCP-3WAY-HSHAKE-UNSUPP=N

MGCP-CONN-ID-AT-GW-UNSUPP=N

MGCP-CMD-SEQ-UNSUPP=Y

MGCP-VMWI-UNSUPP=Y

PORT-START=0

MGCP-VERSION=MGCP-1-0

MGCP-RSVP-UNSUPP=Y

MGCP-RSIPSTAR-UNSUPP=N

MGCP-TERM-INIT-LEVEL=0

IPTOS-RTP-LOWDELAY=Y

IPTOS-RTP-THROUGHPUT=N

IPTOS-RTP-RELIABILITY=N

IPTOS-RTP-PRECEDENCE=CRITICAL

MGCP-HAIRPIN-Z2-UNSUPP=Y

DTMF-CISCO-RTP=Y

DTMF-CISCO-NSE=Y

DTMF-NTE=Y

DTMF-GW-NTE=Y

DTMF-OOB=N

R-G=Y

R-BE=Y

R-CL=Y

MGW-TYPE=MGX8850

OSI-UNSUPP=Y

MGCP-PSTTONE-UNSUPP=Y

MGCP-DIALTONE-TO-UNSUPP=Y

MGCP-MWI-UNSUPP=N

SPARE1-UNSUPP=Y

SPARE2-UNSUPP=Y

IPTOS-RTP-UNSUPP=N

MGCP-NAS-UNSUPP=Y

MGCP-FAX-UNSUPP=Y

MGCP-ES-UNSUPP=Y

FAX-T38-GWMODE-SUPP=Y

FAX-T38-CAMODE-SUPP=N

FAX-INBAND-SUPP=Y

FAX-PREF-MODE=FAX-T38-GWMODE

USE-STATIC-PROFILE=N

REFRESH-DIGIT-MAP=N

MGCP-XDLCX-UNSUPP=Y

MGCP-CAS-BLOCK-UNSUPP=Y

CODEC-NEG-UNSUPP=Y

MGCP-DQOS-UNSUPP=Y

MGCP-PC-SEC-UNSUPP=Y

DOMAIN-NAME-CACHING-UNSUPP=N

Voice Interworking Service Module Trunking Gateway Profile

The following trunking gateway profile provides an example for gateways with a voice interworking service module (VISM). 

[

ID=RALEIGHDS1-505B

TYPE=A7

HOP-COUNTER=20

CFN-SUPP=N

COT-ORIG=N

COT-FREQ=0

COT-TONE=4W-TO-4W

COT-DURATION=1

ECHO-SUPP-REQUIRED=N

SATELLITE-CIRCUIT=N

INBAND-INFO=N

SEND-CIP=N

SEND-CPN=Y

SEND-OCN=Y

SEND-REDIR-NUM=Y

SEND-ATP=Y

SEND-GAP=Y

SEND-GN=N

SEND-JIP=Y

T-IAM=20

T-REL=6

T-RSC=15

T-GRS=15

T-CGB=15

T-BLO=6

T-8=15

T-CCR-R=12

T-COT-R=20

T-COT-L=300

FAST-ANSWER-SUPP=N

SEND-HOPCOUNTER=Y

SEND-CIP-NONGEO=N

SEND-CPN-PRES=N

SEND-REDIRINFO=Y

REDIR-MAX=5

T-9=255

ALARM-CARRIER=UNKNOWN

ALLOW-EXM=Y

ALLOW-CRMCRA=Y

CCT-GRP-CARRIER=DIGITAL

DEFAULT-CHGNOA=NOTUSED

DEFAULT-CHGNPI=NOTUSED

DEFAULT-OLI=NOTUSED

SEND-CHNOLIP=N

SEND-CHN-NONGEO=N

SEND-NOTIFICATION=N

SEND-SERVICECODE=N

SEND-TRANSREQ=N

Default Digit Maps

This section provides provisioning examples for 7- and 10-digit dialing.

7-Digit Local Dialing

The following default digit map is provisioned in the Call Agent if 7-digit local dialing is supported: 

add digit-map id=default; digit-pattern 
=0T|00|[2-9]11|1[2-9]11|[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|0[2-9]xx[2-9]xxxxxx|011xxxxxx.T|01
xxxxxx.T|101xxxx|#|*xx|xxxxxxxxxxxxxxxxxxx; description=default digit map for 7 digit 
local dialing;

The string is interpreted as follows:

String
Description

0T

Local operator (4-second timing after 0) (see notes 1 and 2)

00

InterLATA operator based on PIC (or dialed carrier access code)

[2-9]11

N11 calls (411, 911, and so on)

1[2-9]11

N11 toll calls (for example, 1+411)

[2-9]xxxxxx

7D local calls (no timing after 7)

1[2-9]xx[2-9]xxxxxx

1+10D interLATA / intraLATA calls

0[2-9]xx[2-9]xxxxxx

0+10D local / toll calls

011xxxxxx.T

International call (4-second timing after 6 digits following 011)

01xxxxxx.T

Operator-assisted international call (4-second timing after 6 digits following 01)

101xxxx

Casual dialing

#

Cut-through call if dialed after 101xxxx

*xx

Vertical service codes

xxxxxxxxxxxxxxxx

Used to collect a maximum of 16 digits


Note (1) The interdigit timeout period is 16 seconds.
(2) If the character "T" is specified, the interdigit timeout period is changed to 4 seconds at the media gateway.

10-Digit Local Dialing

The following default digit map is provisioned in the Call Agent if 10-digit local dialing is supported. 

add digit-map id=default; 
digit-pattern=0T|00|[2-9]11|1[2-9]11|[2-9]xx[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|0[2-9]xx[2-9]x
xxxxx|011xxxxxx.T|01xxxxxx.T|101xxxx|#|*xx|xxxxxxxxxxxxxxxxxxx; description=default digit 
map for 10 digit local dialing;

The string is interpreted as follows:

String
Definition

0T

Local operator (4-second timing after 0) (see notes 1 and 2)

00

InterLATA operator based on PIC (or dialed carrier access code)

[2-9]11

N11 calls (411, 911, and so on)

1[2-9]11

N11 toll calls (for example, 1+411)

[2-9]xx[2-9]xxxxxx

10D local calls

1[2-9]xx[2-9]xxxxxx

1+10D interLATA / intraLATA calls

0[2-9]xx[2-9]xxxxxx

0+10D local / toll calls

011xxxxxx.T

International call (4-second timing after 6 digits following 011)

01xxxxxx.T

Operator-assisted International call (4-second timing after 6 digits following 01)

101xxxx

Casual dialing

#

Cut-through call if dialed after 101xxxx

*xx

Vertical service codes

xxxxxxxxxxxxxxxxxxx

Used to collect a maximum of 16 digits


Note (1) The interdigit timeout period is 16 seconds.
(2) If the character "T" is specified, the interdigit timeout period is changed to 4 seconds at the media gateway.

7- or 10-Digit Local Dialing

The following default digit map is provisioned in the Call Agent if both 7- or 10-digit local dialing is supported. 

add digit-map id=default; 
digit-pattern=0T|00|[2-9]11|1[2-9]11|[2-9]xxxxxxT|[2-9]xx[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|0
[2-9]xx[2-9]xxxxxx|011xxxxxx.T|01xxxxxx.T|101xxxx|#|*xx|xxxxxxxxxxxxxxxxxxx; 
description=default digit map for 10 digit local dialing;

The string is interpreted as follows:

String
Description

0T

Local operator (4-second timing after 0) (see notes)

00

InterLATA operator based on PIC (or dialed carrier access code)

[2-9]11

N11 calls (411, 911, and so on)

1[2-9]11

N11 toll calls (for example, 1+411)

[2-9]xxxxxxT

7-digit local with 4-second timing after 7 digits

[2-9]xx[2-9]xxxxxx

10-digit local calls

1[2-9]xx[2-9]xxxxxx

1+10D interLATA / intraLATA calls

0[2-9]xx[2-9]xxxxxx

0+10D local / toll calls

011xxxxxx.T

International call (4-second timing after 6 digits following 011)

01xxxxxx.T

Operator-assisted International call (4-second timing after 6 digits following 01)

101xxxx

Casual dialing

#

Cut-through call if dialed after 101xxxx

*xx

Vertical service codes

xxxxxxxxxxxxxxxxxxx

Used to collect a maximum of 16 digits.


Note (1) The interdigit timeout period is 16 seconds.
(2) If character "T" is specified, the interdigit timeout period is changed to 4 seconds at the media gateway.