Some links below may open a new browser window (
) to display the document you selected.
-
Cisco MDS 9513 Multilayer Director
-
Field Notice: FN - 63132 - MDS9000 - Potential DIMM Memory Issue in a Small Number of DS-X9530-SF2-K9 Supervisor Cards Manufactured Between September 2007 and February 2008
15/Jul/2010 -
Field Notice: FN - 63171 - Deferral of NX-OS 4.1.1a Due to Risk of Configuration Loss When Using Fabric Manager (FM)
15/Oct/2008 -
Field Notice: FN - 63133 - MDS9000 - Generation 1 Linecards May Reload Unexpectedly When They Fail the OHMS Bootflash Test - Issue is Only Applicable to MDS Generation 1 Linecards Running SAN OS Code Prior to 3.3(1c)
03/Jul/2008 -
Field Notice: FN - 63099 - MDS9000 - Generation 1 Modules May Reload During a Non-disruptive SAN-OS Upgrade Due to Compact Flash Being Unable to Partition for New Code - Issue Has Been Addressed for Upgrades from SAN-OS 3.3.1 or Higher Releases
14/Apr/2008 -
Field Notice: FN - 63051 - MDS9000 - The DPVM Process May Terminate Unexpectedly Under Certain Conditions - This Issue Has Been Fixed in SAN-OS 3.1.1 and Later Releases - Customer Can Either Upgrade or Follow the Provided Procedure to Resolve the Issue
17/Mar/2008 -
Field Notice: FN - 62998 - Power Brick Issue in Small Number of DS-X9032 Linecards and DS-X9032-SSM Storage Service Modules
12/Mar/2008 -
Field Notice: FN - 63018 - Performance and Scalability Issues Observed in MDS9000 Fabric Manager Due to Database Limitations - Upgrading to Cisco Fabric Manager Version 3.2 (2c) or Later Resolves the Issue
26/Feb/2008 -
Field Notice: FN - 63019 - Under Rare Conditions, a Non-disruptive Upgrade of a DS-C9506, DS-C9509 or DS-C9513 to SAN-OS 3.1(1) through 3.2 (2c) or a Subsequent Switchover May Cause the Switch to Reboot - Workaround Provided to Resolve the Issue
23/Jan/2008 -
Field Notice: FN - 63017 - Some DS-X9032-SSM Modules Were Mistakenly Shipped with Two Partitions on the Flash Memory Instead of Three, Which is Required for Running Advanced Applications in L3 Mode - Procedure Provided to Create the Third Partition on the Flash Memory
21/Dec/2007 -
Field Notice: FN - 63001 - Small Probability That Some Generation 2 Modules, DS-X9112, DS-X9124, DS-X9148 or DS-X9704 May Reload When Upgrading to SAN-OS 3.0(x), SAN-OS 3.1(x), or SAN-OS 3.2(1a) - Upgrade to SAN-OS 3.2 (2c) or a Later Release Resolves the Issue
04/Dec/2007 -
Field Notice: FN - 62858 - Creating Port Channel ID Greater Than 128 In a Mixed Generation 1 And Generation 2 Line Card Environment Powers Down Generation 1 Line Cards, After a Hitless Upgrade From SAN-OS Release 2.(X) to 3.0 or 3.1
28/Aug/2007
-
Field Notice: FN - 63132 - MDS9000 - Potential DIMM Memory Issue in a Small Number of DS-X9530-SF2-K9 Supervisor Cards Manufactured Between September 2007 and February 2008
-
Cisco MDS 9509 Multilayer Director
-
Field Notice: FN - 63504 - IVR and FCR Applications May Not Work With Specific MDS Gen 3 Linecards/Modules, MDS9222i Switch, and MDS 18/4 Cards Running Older Software
01/Jan/2012 -
Field Notice: FN - 63132 - MDS9000 - Potential DIMM Memory Issue in a Small Number of DS-X9530-SF2-K9 Supervisor Cards Manufactured Between September 2007 and February 2008
15/Jul/2010 -
Field Notice: FN - 63171 - Deferral of NX-OS 4.1.1a Due to Risk of Configuration Loss When Using Fabric Manager (FM)
15/Oct/2008 -
Field Notice: FN - 63133 - MDS9000 - Generation 1 Linecards May Reload Unexpectedly When They Fail the OHMS Bootflash Test - Issue is Only Applicable to MDS Generation 1 Linecards Running SAN OS Code Prior to 3.3(1c)
03/Jul/2008 -
Field Notice: FN - 63099 - MDS9000 - Generation 1 Modules May Reload During a Non-disruptive SAN-OS Upgrade Due to Compact Flash Being Unable to Partition for New Code - Issue Has Been Addressed for Upgrades from SAN-OS 3.3.1 or Higher Releases
14/Apr/2008 -
Field Notice: FN - 63051 - MDS9000 - The DPVM Process May Terminate Unexpectedly Under Certain Conditions - This Issue Has Been Fixed in SAN-OS 3.1.1 and Later Releases - Customer Can Either Upgrade or Follow the Provided Procedure to Resolve the Issue
17/Mar/2008 -
Field Notice: FN - 62998 - Power Brick Issue in Small Number of DS-X9032 Linecards and DS-X9032-SSM Storage Service Modules
12/Mar/2008 -
Field Notice: FN - 63018 - Performance and Scalability Issues Observed in MDS9000 Fabric Manager Due to Database Limitations - Upgrading to Cisco Fabric Manager Version 3.2 (2c) or Later Resolves the Issue
26/Feb/2008 -
Field Notice: FN - 63019 - Under Rare Conditions, a Non-disruptive Upgrade of a DS-C9506, DS-C9509 or DS-C9513 to SAN-OS 3.1(1) through 3.2 (2c) or a Subsequent Switchover May Cause the Switch to Reboot - Workaround Provided to Resolve the Issue
23/Jan/2008 -
Field Notice: FN - 63017 - Some DS-X9032-SSM Modules Were Mistakenly Shipped with Two Partitions on the Flash Memory Instead of Three, Which is Required for Running Advanced Applications in L3 Mode - Procedure Provided to Create the Third Partition on the Flash Memory
21/Dec/2007 -
Field Notice: FN - 63001 - Small Probability That Some Generation 2 Modules, DS-X9112, DS-X9124, DS-X9148 or DS-X9704 May Reload When Upgrading to SAN-OS 3.0(x), SAN-OS 3.1(x), or SAN-OS 3.2(1a) - Upgrade to SAN-OS 3.2 (2c) or a Later Release Resolves the Issue
04/Dec/2007 -
Field Notice: FN - 62858 - Creating Port Channel ID Greater Than 128 In a Mixed Generation 1 And Generation 2 Line Card Environment Powers Down Generation 1 Line Cards, After a Hitless Upgrade From SAN-OS Release 2.(X) to 3.0 or 3.1
28/Aug/2007
-
Field Notice: FN - 63504 - IVR and FCR Applications May Not Work With Specific MDS Gen 3 Linecards/Modules, MDS9222i Switch, and MDS 18/4 Cards Running Older Software
-
Cisco MDS 9506 Multilayer Director
-
Field Notice: FN - 63504 - IVR and FCR Applications May Not Work With Specific MDS Gen 3 Linecards/Modules, MDS9222i Switch, and MDS 18/4 Cards Running Older Software
01/Jan/2012 -
Field Notice: FN - 63132 - MDS9000 - Potential DIMM Memory Issue in a Small Number of DS-X9530-SF2-K9 Supervisor Cards Manufactured Between September 2007 and February 2008
15/Jul/2010 -
Field Notice: FN - 63171 - Deferral of NX-OS 4.1.1a Due to Risk of Configuration Loss When Using Fabric Manager (FM)
15/Oct/2008 -
Field Notice: FN - 63133 - MDS9000 - Generation 1 Linecards May Reload Unexpectedly When They Fail the OHMS Bootflash Test - Issue is Only Applicable to MDS Generation 1 Linecards Running SAN OS Code Prior to 3.3(1c)
03/Jul/2008 -
Field Notice: FN - 63099 - MDS9000 - Generation 1 Modules May Reload During a Non-disruptive SAN-OS Upgrade Due to Compact Flash Being Unable to Partition for New Code - Issue Has Been Addressed for Upgrades from SAN-OS 3.3.1 or Higher Releases
14/Apr/2008 -
Field Notice: FN - 63051 - MDS9000 - The DPVM Process May Terminate Unexpectedly Under Certain Conditions - This Issue Has Been Fixed in SAN-OS 3.1.1 and Later Releases - Customer Can Either Upgrade or Follow the Provided Procedure to Resolve the Issue
17/Mar/2008 -
Field Notice: FN - 62998 - Power Brick Issue in Small Number of DS-X9032 Linecards and DS-X9032-SSM Storage Service Modules
12/Mar/2008 -
Field Notice: FN - 63018 - Performance and Scalability Issues Observed in MDS9000 Fabric Manager Due to Database Limitations - Upgrading to Cisco Fabric Manager Version 3.2 (2c) or Later Resolves the Issue
26/Feb/2008 -
Field Notice: FN - 63019 - Under Rare Conditions, a Non-disruptive Upgrade of a DS-C9506, DS-C9509 or DS-C9513 to SAN-OS 3.1(1) through 3.2 (2c) or a Subsequent Switchover May Cause the Switch to Reboot - Workaround Provided to Resolve the Issue
23/Jan/2008 -
Field Notice: FN - 63017 - Some DS-X9032-SSM Modules Were Mistakenly Shipped with Two Partitions on the Flash Memory Instead of Three, Which is Required for Running Advanced Applications in L3 Mode - Procedure Provided to Create the Third Partition on the Flash Memory
21/Dec/2007 -
Field Notice: FN - 63001 - Small Probability That Some Generation 2 Modules, DS-X9112, DS-X9124, DS-X9148 or DS-X9704 May Reload When Upgrading to SAN-OS 3.0(x), SAN-OS 3.1(x), or SAN-OS 3.2(1a) - Upgrade to SAN-OS 3.2 (2c) or a Later Release Resolves the Issue
04/Dec/2007 -
Field Notice: FN - 62858 - Creating Port Channel ID Greater Than 128 In a Mixed Generation 1 And Generation 2 Line Card Environment Powers Down Generation 1 Line Cards, After a Hitless Upgrade From SAN-OS Release 2.(X) to 3.0 or 3.1
28/Aug/2007
-
Field Notice: FN - 63504 - IVR and FCR Applications May Not Work With Specific MDS Gen 3 Linecards/Modules, MDS9222i Switch, and MDS 18/4 Cards Running Older Software
-