Table Of Contents

M

messaging-gateway secondary

M

---

Last Updated: November 17, 2010

messaging-gateway secondary

messaging-gateway secondary

To specify a secondary messaging gateway, use the messaging-gateway secondary command in Cisco UMG endpoint configuration mode.

messaging-gateway secondary location-id

Syntax Description

location-id

Location ID of the secondary messaging gateway (range: 1-10 digits).

Command Default

The default secondary messaging gateway is none.

Command Modes

Cisco UMG endpoint configuration (config-endpoint)

Command History

Cisco UMG Version	Modification
1.0	This command was introduced.

Usage Guidelines

Use this command to provide failover support for <Abbreviation>Cisco Unity Express (all supported versions) and Cisco Unity endpoints.

---

Note Avaya Interchange endpoints rely on a DNS server for failover support.

---

Examples

The following example illustrates the use of the messaging-gateway secondary command.

umg-1# config t

umg-1(config)# endpoint 5000 cue 

umg-1(config-endpoint)# messaging-gateway secondary 20000

umg-1(config-endpoint)# end

umg-1(config)# end

umg-1# show endpoint local

A total of 1 local endpoint(s) have been found:

Location    Location          Endpoint     Endpoint  Primary     Secondary

ID          Prefix            Type         Status    Gateway     Gateway

---------------------------------------------------------------------------

40000                         CUE          Offline   57000       50000

umg-1#

Related Commands

Command	Description
endpoint	Enters endpoint configuration mode to provision endpoints manually.
show endpoint	Displays endpoint details.
show messaging-gateway	Displays details for any or all messaging gateways in the system.