-
Cisco Unified Messaging Gateway Command Reference for 8.0 and Later Versions
-
Using Commands
-
Common Commands
-
A Commands (Common)
-
B Commands (Common)
-
C Commands (Common)
-
D Commands (Common)
-
E Commands (Common)
-
H Commands (Common)
-
I Commands (Common)
-
K Commands (Common)
-
L Commands (Common)
-
M Commands (Common)
-
N Commands (Common)
-
O Commands (Common)
-
P Commands (Common)
-
R Commands (Common)
-
S Commands (Common)
-
T Commands (Common)
-
U Commands (Common)
-
W Commands (Common)
-
- VPIM Commands
- SRSV and E-SRST Commands
-
Feedback
Table Of Contents
L
Last Updated: November 17, 2010license activate srst nodes
To activate the license for Cisco Unified E-SRST nodes, use the license activate srst nodes command in Cisco UMG EXEC mode. Using the no form of this command sets the usage to zero and disables the feature.
license activate srst nodes number
no license activate srst nodes
Syntax Description
Command Modes
Cisco UMG EXEC
Command History
Usage Guidelines
The number argument can be between 0 and the maximum number of nodes supported by the device and must be a multiple of 25. This activation count is applied for all types of licenses, so it can be used to reduce the count below the module maximum count or below the count of any other installed license.
Examples
The following example illustrates the use of the license activate srst nodes command when the license has not yet been activated:
se-192-1-1-149# license activate srst nodes 25Evaluation licenses are being activated in the device for the following feature(s):Feature Name: CUMG-SRST-NODEPLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE ORLICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCHPRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWINGTERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUNDBOUND BY ALL THE TERMS SET FORTH HEREIN.You hereby acknowledge and agree that the product feature licenseis terminable and that the product feature enabled by such licensemay be shut down or terminated by Cisco after expiration of theapplicable term of the license (e.g., 30-day trial period). Ciscoreserves the right to terminate or shut down any such product featureelectronically or by any other means available. While alerts or suchmessages may be provided, it is your sole responsibility to monitoryour terminable usage of any product feature enabled by the licenseand to ensure that your systems and networks are prepared for the shutdown of the product feature. You acknowledge and agree that Cisco willnot have any liability whatsoever for any damages, including, but notlimited to, direct, indirect, special, or consequential damages relatedto any product feature being shutdown or terminated. By clicking the"accept" button or typing "yes" you are indicating you have read andagree to be bound by all the terms provided herein.ACCEPT? [y/n]?yLicense activation count saved for use at next reloadThe following example illustrates the use of the license activate srst nodes command when the license has already been activated:
se-192-1-1-149# license activate srst nodes 25Current license already active, count saved for use at next reloadThe following example illustrates the use of the license activate srst nodes command to disable the licenses:
se-192-1-1-149# no license activate srst nodesLicense will be disabled at next reloadRelated Commands
license activate srsv nodes
To activate the license for Cisco Unified SRSV nodes, use the license activate srsv nodes command in Cisco UMG EXEC mode. Using the no form of this command sets the usage to zero and disables the feature.
license activate srsv nodes number
no license activate srsv nodes
Syntax Description
Command Modes
Cisco UMG EXEC
Command History
Usage Guidelines
The number argument can be between 0 and the maximum number of nodes supported by the device and must be a multiple of 25. This activation count is applied for all types of licenses, so it can be used to reduce the count below the module maximum count or below the count of any other installed license.
Examples
The following example illustrates the use of the license activate srsv nodes command when the license has not yet been activated:
se-192-1-1-149# license activate srsv nodes 25Evaluation licenses are being activated in the device for the following feature(s):Feature Name: CUMG-SRSV-NODEPLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE ORLICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCHPRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWINGTERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUNDBOUND BY ALL THE TERMS SET FORTH HEREIN.You hereby acknowledge and agree that the product feature licenseis terminable and that the product feature enabled by such licensemay be shut down or terminated by Cisco after expiration of theapplicable term of the license (e.g., 30-day trial period). Ciscoreserves the right to terminate or shut down any such product featureelectronically or by any other means available. While alerts or suchmessages may be provided, it is your sole responsibility to monitoryour terminable usage of any product feature enabled by the licenseand to ensure that your systems and networks are prepared for the shutdown of the product feature. You acknowledge and agree that Cisco willnot have any liability whatsoever for any damages, including, but notlimited to, direct, indirect, special, or consequential damages relatedto any product feature being shutdown or terminated. By clicking the"accept" button or typing "yes" you are indicating you have read andagree to be bound by all the terms provided herein.ACCEPT? [y/n]?yLicense activation count saved for use at next reloadThe following example illustrates the use of the license activate srsv nodes command when the license has already been activated:
se-192-1-1-149# license activate srsv nodes 25Current license already active, count saved for use at next reloadThe following example illustrates the use of the license activate srsv nodes command to disable the licenses:
se-192-1-1-149# no license activate srsv nodesLicense will be disabled at next reloadRelated Commands