Table Of Contents

I Commands

install feature-set fabricpath

I Commands

---

This chapter describes the Cisco NX-OS FabricPath commands that begin with I.

install feature-set fabricpath

To install the FabricPath feature set on the switch, use the install feature-set fabricpath command. To remove the FabricPath feature set, use the no form of this command.

install feature-set fabricpath

no install feature-set fabricpath

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release	Modification
6.0(2)N1(1)	This command was introduced.

Usage Guidelines

---

Note The FabricPath feature is supported only on the Cisco Nexus 5500 Series switches.

---

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to install the FabricPath features on the switch:

switch# configure terminal

switch(config)# install feature-set fabricpath

switch(config)# 

Related Commands

Command	Description
feature fabric-binding	Enables or disables fabric binding on the switch.
feature-set fabricpath	Enables the FabricPath feature set on the switch.
show running-config	Displays the running system configuration information.