Feedback
Table Of Contents
MGMT 10/100 Fast Ethernet Port
Cable Pinouts
This appendix describes pinout information, and includes the following sections:
•
Console RJ-45 to DB-9 Adapter
•
10/100/1000BaseT Ports
The adaptive security appliance supports 10/100/1000BaseT ports. You must use at least a Category 5 cable for 100/1000baseT operations, but a Category 3 cable can be used for 10BaseT operations.
The 10/100/1000BaseT ports use standard RJ-45 connectors and supports MDI and MDI-X connectors. Ethernet ports normally use MDI connectors and Ethernet ports on a hub normally use an MDI-X connector.
Use an Ethernet straight-through cable to connect an MDI to an MDI-X port. Use a cross-over cable to connect an MDI to an MDI port, or an MDI-X to an MDI-X port.
Figure 1-1 shows the 10BaseT and the 100BaseTX connector (RJ-45).
Figure 1-1 10/100 Port Pinouts
Figure 1-2 shows the 10BaseT, 100BaseTX, and 1000BASE-T connector (RJ-45).
Figure 1-2 10/100/1000 Port Pinouts
Console Port (RJ-45)
Cisco products use the following types of RJ-45 cables:
•
•
Note
Figure 1-3 shows the RJ 45 cable.
Figure 1-3 RJ-45 Cable
To identify the RJ-45 cable type, hold the two ends of the cable next to each other so that you can see the colored wires inside the ends, as shown in Figure 1-4.
Figure 1-4 RJ-45 Cable Identification
Examine the sequence of colored wires to determine the type of RJ-45 cable, as follows:
•
•
Table 1-1 lists the rolled (console) cable pinouts for RJ-45.
Table 1-1 RJ-45 Rolled (Console) Cable Pinouts
-
1
8
-
-
2
7
-
-
3
6
-
-
4
5
-
-
5
4
-
-
6
3
-
-
7
2
-
-
8
1
-
Console RJ-45 to DB-9 Adapter
Table 1-2 lists the cable pinouts for RJ-45 to DB-9 or DB-25.
Table 1-2 Cable Pinouts for RJ-45 to DB-9 or DB-25
RTS
8
8
DTR
7
6
TxD
6
2
GND
5
5
GND
4
5
RxD
3
3
DSR
2
4
CTS
1
7
MGMT 10/100 Fast Ethernet Port
The MGMT 10/100 Fast Ethernet port has an RJ-45 connector. You can use a modular, RJ-45, straight-through UTP cable to connect the management port to an external hub, switch, or router.
Table 1-3 lists the cable pinouts for 10/100BASE-T Management Port Cable Pinouts (MDI).
Table 1-3 10/100BASE-T Management Port Cable Pinouts (MDI)
TD+
1
TD-
2
RD+
3
RD-
6
Not used
4
Not used
5
Not used
7
Not used
8
SFP Fiber Ports
Table 1-4 lists the types of SFP modules and connectors used in the adaptive security appliance.
Table 1-4 Types of SFP Modules and Connectors
Gigabit Ethernet
1000BASE-SX
SW
MMF
1000BASE-LX
LW
SMF
Table 1-5 lists the SFP port cabling specifications for the SFP modules and connectors used in the adaptive security appliance.
