Table Of Contents

APPLY Commands

5.1  APPLY

APPLY Commands

---

This chapter provides apply (APPLY) commands for the Cisco NCS 2002 and Cisco NCS 2006.

5.1  APPLY

The Apply (APPLY) command activates or reverts a software load during a software upgrade or downgrade process.

Usage Guidelines

An error will be generated if you attempt to activate an older software load or attempt to revert to a newer software load.

Category

File Transfer

Security

Superuser

Input Format

APPLY:[<TID>]::<CTAG>[::<MEM_SW_TYPE>][:FORCEENABLE=<FORCEENABLE>];

Input Example

APPLY:::4::DL_TYPE=ACT:FORCEENABLE=YES;

Table 5-1 APPLY Commands - Parameter Support

Input Parameters	Description
<MEM_SW_TYPE>	(Optional) Memory switch action during the software upgrade. The parameter type is DL_TYPE, which indicates the software download type. The default value is ACT.
•ACPT	Activates to a newer software load on the active controller card and resets the active card.
•CANC	Cancels the software download.
•RVRT	Reverts to an older software load during software download.
•ACT	Activates to a new software load.
<FORCEENABLE>	(Optional) Indicates whether the command should proceed even if there are Database Out of Sync alarms.
•YES	Yes
•NO	No