Guest

Simple Network Management Protocol (SNMP)

Introduction

The Simple Network Management Protocol(SNMP)is an application-layer protocol that facilitates the exchange of management information between network devices. It is part of the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite.
Maintain and Operate

Maintain and Operate TechNotes

(All IP Application Services Maintain and Operate TechNotes)

Troubleshoot and Alerts

Troubleshooting TechNotes

(All IP Application Services Troubleshooting TechNotes)

Adding Cisco Traps in NetView and HP OpenView

An Example of Data Collection and Thresholding in NetView and HPOV

Cisco Guide to Harden Cisco IOS DevicesCross-Navigate

Cisco IOS SNMP Traps Supported and How to Configure Them

Disable SNMP v1 or SNMP v2c While Other Versions Remain Enabled

Equivalent MIB Objects for VoIP show Commands

Getting Channel Usage from a Device

How To Add, Modify, and Remove VLANs on a Catalyst Using SNMP

How To Calculate Bandwidth Utilization Using SNMP

How to Clear a Single ARP Entry in a Router Using SNMP

How to Collect CPU Utilization on Cisco IOS Devices Using SNMP

How to Configure SNMP Community Strings

How to Detect and Clear Hung TCP Connections using SNMP

How to Find the Source of Cisco SNMP AuthenticationFailure Traps

How to Get Catalyst Switch Backplane Utilization Using SNMPCross-Navigate

How To Get Dynamic CAM Entries (CAM Table) for Catalyst Switches Using SNMP

How to Get Free and Largest Block of Contiguous Memory Using SNMP

How To Get Information About Users Connected To The TTY By Using SNMP

How To Get the Environment Temperature on a Catalyst 6500/6000 Using SNMP

How to Track When a Power Supply Dies or Redundant Supply Changes State Using SNMP

Implementing Network Management on ATM Interfaces

Interface Index (ifIndex) Persistence

IP Simple Network Management Protocol (SNMP) Causes High CPU Utilization

ISE SMS Notifications Setup for Sponsored Guest Accounts

Measuring the Utilization of ATM PVCs

MIB Compilers and Loading MIBs

Monitor ASR Kernel Load CPU with EEM Script

Monitor Redundant Power Supply with SNMP

Moving Files and Images Between a CatOS Switch and TFTP Server via SNMP

Moving Files and Images Between a Router and TFTP Server via SNMP

Ping MIB Implementation

Securing Simple Network Management Protocol

SNMP coldStart Traps Device Reload Behavior

SNMP Community String Indexing

The Traps Sent with SNMP-Server Enabled Traps Configured

Understanding Simple Network Management Protocol (SNMP) Traps

Understanding Table Index Values in SNMP

Using Cisco Service Assurance Agent and Internetwork Performance Monitor to Manage Quality of Service in Voice over IP NetworksCross-Navigate

Using SNMP to Find a Port Number from a MAC Address on a Catalyst Switch

Using SNMP with the Security Appliances PIX/ASACross-Navigate

Troubleshooting Guides

(All IP Application Services Troubleshooting Guides)