Cisco Small Business Voice Systems

This article will show you how to configure the Night time Auto Attendant (AA) on SPA9000. 

Configuring the Night Time AA on SPA9000

Step 1: 
Create a night time Auto-Attendant (AA) by following the Auto-Attendant Quick Install Guide.

Step 2:
Access the SPA9000's web-based setup page. For instructions, click here.

Step 3:
When the web-based setup page appears, click Admin Login then advanced.

Step 4:
Click Voice then SIP.

Step 5: 
Change Day Time to desired preferred time of the user where:

start=hh:mm:ss;end=hh:mm:ss
(hh for hours, mm for minutes, and ss for seconds)

Forexample,start=9:0:0;end=17:0:0 means the start time is 9 AM and the end time is 5 PM. The other hours (5 PM to 9 AM) are considered nighttime hours.

Step 6:

Click .

Step 7: 
Click Line 1 then look for Contact list and enter "aa"

Step 8:

Click .

Step 9: 
Click Regional.

Step 10:
Change the Time Zone to GMT +08:00 (this is equal to Philippine time). IP phones will automatically reboot and obtain the same time zone.

Step 11: 
Click Info.

Step 12: 
Check the Current AA.

Step 13:

Click .