Enabling the Remote Management Feature on the SPA3102 [Cisco Small Business Voice Gateways and ATAs]

Document ID: 108724

Updated: Dec 12, 2008

Introduction
How to enable the remote management feature of SPA3102?
Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How to enable the remote management feature of SPA3102?

In order to enable the remote management on the SPA3102, complete the steps outlined in this document.

Enabling Remote Management

Step 1:
Connect the computer to the LAN port of the SPA3102 and access the SPA400's web-based setup page. For instructions, click here.
Step 2:
When the SPA's web-based setup page appears, click Admin Login then advanced.
Step 3:
Click WAN Setup under Router, then look for Enable WAN Web Server and select yes. The default WAN Web Server Port is set to "80 " on the web-based setup page of SPA-3102.
Step 4:

Click .

Note: After saving the settings, the user can access the SPA3102 web-based setup page remotely using "http://wanipaddressofspa3102:80" on the Internet Explorer's Address bar.