Cisco Small Business Voice Gateways and ATAs

Note: Before proceeding, please note that Linksys does not support the configuration of Xbox™. The following instructions simply tell you how to configure the?router for the Xbox™, not the game console itself. For technical support on the Xbox™, contact Microsoft.

Setting-Up the Xbox™????????????????????????????

Step 1:
Power down the Xbox™ and connect a regular straight thru Ethernet cable from one of the numbered ports on the?router and plug the other end of the cable into the Xbox™'s Ethernet port.

Step 2:
Power on the Xbox™ without a CD on the tray then the Xbox Dashboard should appear.?

Step 3:
Select Settings then press A on the controller.????

Step 4:
When the Xbox Live screen appears, select Network Settings then press A on the controller.

Step 5:
When the Network Settings screen appears, select IP Addresses then press A.

Step 6:
Under Configuration, select Automatic then press A on the controller. Take note that the IP Address being shown will be the Xbox™'s IP Address. Press B to return to the previous screen.

Step 7:
When the Network Settings screen appears, select DNS Servers then press A.

Step 8:
Under Configuration, select Automatic and then press A on the controller to save the changes. Press B to return to the previous screen to check the PPoE settings.

Step 9:
When the Network Settings screen appears, select PPPoE Settings then press A.

Step 10:
Under Configuration, select Off then press A on the controller to save the changes. Press B to return to the previous screen.

Step 11:
Once the Network Settings appears, select Connect and then press A to test the connection.

?