The Cisco® MGX® 8000 Series Multiservice Switches are a scalable family of multiservice switches, scaling from 1.2 Gbps to 180 Gbps redundant switching capacity and from DS0 to OC-192/STM-64 interface capacity. This scalability provides exceptional savings and efficiency for network operations and services growth. The Cisco MGX 8000 family includes the Cisco MGX 8850, MGX 8850/B, MGX 8830/B and MGX 8950 Multiservice Switches.
The Cisco MGX-XM60 Switching Module is the switch fabric that powers the Cisco MGX 8950 Advanced ATM Multiservice Switch. The Cisco MGX-XM60 provides 60 Gbps of full-duplex nonblocking switching capacity. Each Cisco MGX 8950 can be configured with up to four Cisco XM-60s to provide 240 Gbps of switching capacity for the system.
The Cisco MGX-XM60 Switching Module meets service providers' demand for carrier-class availability by offering hot-standby, load-sharing redundancy. (Refer to Figure 1.)
Figure 1. Cisco MGX-XM60
Technical Specifications
The Cisco MGX-XM60 Switching Module has the following primary features:
• Single-height card
• 60-Gbps nonblocking crosspoint switch fabric
• Dynamic sharing of capacity across multiple Cisco XM-60s, allowing for N + 1 redundancy
• Four installed in each Cisco MGX 8950 for 240-Gbps total capacity, 180-Gbps redundant capacity
• Hot card insertion/removal
• Complete separation from control processor, allowing data forwarding in the event of control card failure
Table 1 provides product specifications.
Table 1. Product Specifications
Description
Specification
Chassis compatibility
MGX 8950
Software compatibility
MGX S/W Releases supporting MGX-XM60:
• MGX Rls 4.0.15 and above
Network management
• Managed by Cisco WAN Manager Software suite
• Based on Simple Network Management Protocol (SNMP)
Power
• Input power required: -48 VDC
• Power consumption: 61 W
Physical dimensions
H x D: 7.25 x 16.5 in. (18.41 x 41.91 cm)
Weight
3.5 lb
Environmental conditions
• Storage Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Temperature:
• Normal: 5°C to 40°C (41°F to 104°F)
• Short term: -5°C to 50°C (23°F to 122°F)
• Relative Humidity:
• Normal: 5% to 85%
• Short-term: 5% to 90% but not to exceed 0.024 kg water/kg of dry air
Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1 year period.)
Approvals and Compliance
Table 2 lists compliance and agency approval details.
Table 2. Compliance and Agency Approvals
Compliance Type
Description
Safety standards
• UL/CSA/IEC/EN 60950-1
• IEC/EN 60825 Laser Safety
• ACA TS001
• AS/NZS 60950
• FDA-Code of Federal Regulations Laser Safety
EMI
• FCC Class A
• ICES 003 Class A
• AS/NZS 3548 Class A
• CISPR 22 (EN55022) Class A
• VCCI Class A
• BSMI Class A
• IEC/EN 61000-3-2: Power Line Harmonics
• IEC/EN 61000-3-3: Voltage Fluctuations and Flicker