Table Of Contents

File Commands

file delete

file dump

file get

file list

file search

file tail

file view

File Commands

---

Revised: April 15, 2009, OL-19545-02

This chapter contains the following file commands:

•file delete

•file dump

•file get

•file list

•file search

•file tail

•file view

file delete

file delete

activelog directory/filename [detail] [noconfirm]

inactivelog directory/filename [detail] [noconfirm]

install directory/filename [detail] [noconfirm]

Options

•detail—Displays a listing of deleted files with the date and time.

•noconfirm—Deletes files without asking you to confirm each deletion.

Syntax Description

directory/filename	Specifies the path and filename of the file(s) to delete. You can use the wildcard character, *, for filename.
activelog	Specifies a log on the active side.
inactivelog	Specifies a log on the inactive side.
install	Specifies an installation log.

Command Modes

Admin

Command privilege level: 1

Allowed during upgrade: Yes

Command History

Release	Modifications
1.5	This command was first documented.

Usage Guidelines

This command deletes one or more files.

---

Caution You cannot recover a deleted file except, possibly, by using the Disaster Recovery System.

---

You get prompted for confirmation after entering the command. You cannot delete directories or files that are in use.

Examples

admin: file delete install install.log

file dump

file dump

activelog directory/filename [detail] [hex]

inactivelog directory/filename [detail] [hex]

install directory/filename [detail] [hex]

Options

•detail—Displays listing with the date and time

•hex—Displays output in hexadecimal

Syntax Description

directory/filename	Specifies the path and filename of the file to dump. You can use the wildcard character, *, for  filename as long as it resolves to one file.
filename	Specifies the filename of the file to dump.
activelog	directory/filename [detail] [hex]
inactivelog	Secifies a log on the inactive side.
install	Specifies an installation log.

Command Modes

Admin

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

This command dumps the contents of a file to the screen, a page at a time.

To determine which files you can dump with the activelogdetails parameter, first enter the following command:

file list activelogdetails *

The output lists the filenames that you can dump.

Examples

This command dumps contents of file _cdrIndex.idx.

admin: file dump activelog cm/cdr/_cdrIndex.idx

file get

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

Options

•abstime—Absolute time period, specified as hh:mm:MM/DD/YY hh:mm:MM/DD/YY

•reltime—Relative time period, specified as minutes | hours | days | weeks | months value

•match—Match a particular string in the filename, specified as string value

•recurs—Get all files, including subdirectories

Syntax Description

directory/filename	Specifies the path to the file(s) to delete. You can use the wildcard character, *, for  filename as long as it resolves to one file.
activelog	Specifies a log on the active side.
inactivelog	Specifies a log on the inactive side
install	Specifies an installation log.

Command Modes

Admin

Command privilege level: 0

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

This command sends the file to another system by using SFTP.

After the command identifies the specified files, you get prompted to enter an SFTP host, username, and password.

Examples

This command gets all files in the activelog operating system directory that match the string "plat".

admin: file get activelog platform match plat

This command gets all operating system log files for a particular time period.

admin: file get activelog platform/log abstime 18:00:9/27/2005 18:00:9/28/2005

file list

file list

activelog directory [page] [detail] [reverse] [date | size]

inactivelog directory [page] [detail] [reverse] [date | size]

install directory [page] [detail] [reverse] [date | size]

tftp directory [page] [detail] [reverse] [date | size]

Options

•detail—Long listing with date and time

•date—Sort by date

•size—Sort by file size

•reverse—Reverse sort direction

•page—Displays the output one screen at a time.

Syntax Description

activelog	Specifies a log on the active side
inactivelog	Specifies a log on the inactive side.
install	Specifies an installation log.
tftp	Specifies a TFTP file.
directory	Specifies the path to the directory to list. You can use a wildcard character, *, for directory as long as it resolves to one directory.

Command Modes

Admin

Command privilege level: 1 for logs, 0 for TFTP files

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

This command lists the log files in an available log directory.

Examples

This example lists operating system log files with details.

admin: file list activelog platform/log page detail

This example lists directories in CDR repository.

admin: file list activelog cm/cdr_repository

This example lists CDR files in a specified directory by size.

admin: file list activelog cm/cdr_repository/processed/20050812 size

file search

file search

activelog directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

inactivelog directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

install directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

Options

•abstime—Specifies which files to search based on file creation time. Enter a start time and an end time.

•days|hours|minutes—Specifies whether the file age is in days, hours, or minutes.

•ignorecase—Ignores case when searching.

•reltime—Specifies which files to search based on file creation time. Enter the age of files to search.

•hh:mm:ss mm/dd/yyyy—An absolute time, in the format hours:minutes:seconds month/day/year.

•timevalue—The age of files to search. Specify the unit of this value with the {days | hours | minutes} option.

Syntax Description

activelog	Specifies a log on the active side.
inactivelog	Specifies a log on the inactive side.
install	Specifies an installation log.
reg-exp	Represents a regular expression.
directory/filename	Represents the path to the file(s) to search. You can use the wildcard character, *, to represent all or part of the filename

Command Modes

Admin

Command privilege level: 0

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

Write the search term in the form of a regular expression, which is a special text string for describing a search pattern.

If the search term is found in only one file, the filename appears at the top of the output. If the search term is found in multiple files, each line of the output begins with the filename in which the matching line was found.

Examples

admin: file search activelog platform/log/platform.log Err[a-z] ignorecase

file tail

file tail

activelog directory/filename [detail] [hex] [lines]

inactivelog directory/filename [detail] [hex] [lines]

install directory/filename [detail] [hex] [lines]

Options

•detail—Long listing with date and time

•hex—Hexadecimal listing

•lines—Number of lines to display

Syntax Description

activelog	Specifies a log on the active side.
inactivelog	Specifies a log on the inactive side.
install	Specifies an installation log.
directory/filename	Specifies the path to the file to tail. You can use the wildcard character, *, for filename as long as it resolves to one file.

Command Modes

Admin

Command privilege level: 1 for logs, 0 for TFTP files

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

This command tails (prints the last few lines) of a log file.

Examples

This example tails the operating system CLI log file.

admin: file tail activelog platform/log/cli00001.log

file view

file view

activelog directory/filename

inactivelog directory/filename

install directory/filename

Options

•detail—Long listing with date and time

•hex—Hexadecimal listing

•lines—Number of lines to display

Syntax Description

activelog	Specifies a log on the active side.
inactivelog	Specifies a log on the inactive side.
install	Specifies an installation log.
directory/filename	Specifies the path to the file to tail. You can use the wildcard character, *, for filename as long as it resolves to one file.

Command Modes

Admin

Command privilege level: 0

Allowed during upgrade: Yes

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

This command displays the contents of a file.

Examples

This example displays the install log.

admin: file view install install.log