Table Of Contents

Diag Commands

diag display loopback full disable

diag display loopback full enable

diag display loopback full status

diag display register dump

Diag Commands

---

Revised: March 26, 2009, OL-19335-02

This chapter contains the following diag commands:

•diag display loopback full disable

•diag display loopback full enable

•diag display loopback full status

•diag display register dump

diag display loopback full disable

diag display loopback full disable

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

Use this command to terminate a full diagnostic display loopback.

Examples

admin:diag display loopback full disable

Stopping Display Loopback

Related Commands

Command	Description
diag display loopback full enable	Initiates a full diagnostic display loopback.
diag display loopback status	Gives the status of the full diagnostic display loopback.

diag display loopback full enable

diag display loopback full enable timeout value

Syntax Description

timeout value

How long the loopback should run (in seconds). The value should be between 10 and 3600 (default is 60).

Command Modes

Admin

Command privilege level: 1

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

Use this command to initiate a full diagnostic display loopback. You must stop the calling service to perform this loopback.

---

Note Remember to restart the calling services when done.

---

Examples

admin:diag display loopback full enable timeout 60

Loopback is now running

Related Commands

Command	Description
diag display loopback full disable	Terminates a full diagnostic display loopback.
diag display loopback status	Gives the status of the full diagnostic display loopback.

diag display loopback full status

diag display loopback full status

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release	Modifications
1.2	This command was first documented.

Usage Guidelines

Use this command for the status of the full diagnostic display loopback.

Examples

admin:diag display loopback full status

Loopback is not running

Related Commands

Command	Description
diag display loopback full disable	Terminates a full diagnostic display loopback.
diag display loopback full enable	Initiates a full diagnostic display loopback.

diag display register dump

diag display register dump

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release	Modifications
1.4.1	This command was first introduced.

Usage Guidelines

Use this command to download diagnostic display register information. To retrieve the diagnostic display register information, use the utils logs generate command.

Examples

admin:diag display register dump

Related Commands

Command	Description
utils logs generate	Generates log files.