Cisco TelePresence Recording Server Release 1.8 Command Reference - CTRS Show Commands [Cisco TelePresence Recording Server]

Table Of Contents

CTRS Show Commands

show account

show accountlocking

show activesessions all

show activesessions both

show activesessions recordings

show activesessions replays

show cert list

show cert own

show cert trust

show cli pagination

show csr list

show csr own

show date

show diskalertthreshold

show diskusage activelog

show diskusage common

show diskusage inactivelog

show diskusage install

show diskusage tmp

show diskspace left

show diskspace used

show environment fans

show environment power-supply

show environment temperatures

show hardware

show hdcapable

show ldcapable

show logins

show mediasecurity

show memory count

show memory modules

show memory size

show myself

show network all

show network dhcp eth0 status

show network eth0

show network failover

show network ip_conntrack

show network ipprefs all

show network ipprefs enabled

show network ipprefs public

show network max_ip_conntrack

show network route

show network status

show open files all

show open files process

show open files regexp

show open ports all

show open ports regexp

show packages

show password age

show password complexity character

show password complexity length

show password expiry maximum-age

show password expiry minimum-age

show password expiry user maximum-age

show password expiry user minimum-age

show password history

show password inactivity

show process list

show process load

show process name

show process open-fd

show process pid

show process search

show process user

show process using-most cpu

show process using-most memory

show recordedquality

show refreshrate

show registry

show snmp trapdests

show snmp users

show statistics dialnumber

show stats io

show status

show syslog facility

show syslog heartbeat facility

show syslog heartbeat interval

show syslog heartbeat msg

show syslog heartbeat severity

show syslog timezone

show syslog version

show tech all

show tech network all

show tech network hosts

show tech network interfaces

show tech network resolv

show tech network routes

show tech network sockets

show tech runtime all

show tech runtime cpu

show tech runtime disk

show tech runtime env

show tech runtime memory

show tech system all

show tech system bus

show tech system hardware

show tech system host

show tech system kernel modules

show tech system software

show tech system tools

show timezone

show users

show version

show videoquality

show workingdir

CTRS Show Commands

October 2011

This chapter contains Cisco TelePresence Recording Server (CTRS) show commands:

•show account

•show accountlocking

•show activesessions all

•show activesessions both

•show activesessions recordings

•show activesessions replays

•show cert list

•show cert own

•show cert trust

•show cli pagination

•show csr list

•show csr own

•show date

•show diskalertthreshold

•show diskusage activelog

•show diskusage common

•show diskusage inactivelog

•show diskusage install

•show diskusage tmp

•show diskspace left

•show diskspace used

•show environment fans

•show environment power-supply

•show environment temperatures

•show hardware

•show hdcapable

•show ldcapable

•show logins

•show mediasecurity

•show memory count

•show memory modules

•show memory size

•show myself

•show network all

•show network dhcp eth0 status

•show network eth0

•show network failover

•show network ip_conntrack

•show network ipprefs all

•show network ipprefs enabled

•show network ipprefs public

•show network max_ip_conntrack

•show network route

•show network status

•show open files all

•show open files process

•show open files regexp

•show open ports all

•show open ports regexp

•show packages

•show password age

•show password complexity character

•show password complexity length

•show password expiry maximum-age

•show password expiry minimum-age

•show password expiry user maximum-age

•show password expiry user minimum-age

•show password history

•show password inactivity

•show process list

•show process load

•show process name

•show process open-fd

•show process pid

•show process search

•show process user

•show process using-most cpu

•show process using-most memory

•show recordedquality

•show refreshrate

•show registry

•show snmp trapdests

•show snmp users

•show statistics dialnumber

•show stats io

•show status

•show syslog facility

•show syslog heartbeat facility

•show syslog heartbeat interval

•show syslog heartbeat msg

•show syslog heartbeat severity

•show syslog timezone

•show syslog version

•show tech all

•show tech network all

•show tech network hosts

•show tech network interfaces

•show tech network resolv

•show tech network routes

•show tech network sockets

•show tech runtime all

•show tech runtime cpu

•show tech runtime disk

•show tech runtime env

•show tech runtime memory

•show tech system all

•show tech system bus

•show tech system hardware

•show tech system host

•show tech system kernel modules

•show tech system software

•show tech system tools

•show timezone

•show users

•show version

•show videoquality

•show workingdir

Note For information about using the CTRS administration software, refer to the Cisco TelePresence Recording Server Release 1.8 Administration Guide at the following URL:

http://www.cisco.com/en/US/products/ps10341/prod_maintenance_guides_list.html

show account

show account
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display a list of all administrative accounts except for the master administrator account.

Examples
admin:show account
Name = test, Privilege = 1
show accountlocking

show accountlocking
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command shows the current account locking settings.

Examples
admin:show accountlocking
Account Lockout is disabled
show activesessions all

show activesessions all
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all active recordings and replays.

Examples
admin:show activesessions all
Setting active types to all
*************Active Call(s) *************
*******************************************
show activesessions both

show activesessions both
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all active bidirectional sessions.

Examples
admin:show activesessions both
Setting active types to bidirectional
*************Active Call(s) *************
*******************************************
show activesessions recordings

show activesessions recordings
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all active recordings.

Examples
admin:show activesessions recordings
Setting active types to recordings
*************Active Call(s) *************
*******************************************
show activesessions replays

show activesessions replays
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all active replays.

Examples
admin:show activesessions replays
Setting active types to replays
*************Active Call(s) *************
*******************************************
show cert list

show cert list {own | trust}
Syntax Description

own

Display digital security certificates owned by the CTRS

trust

Display digital security certificates trusted by the CTRS

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display a list of digital security certificates installed and accepted on the CTRS.

Examples
admin:show cert list own
tomcat/tomcat.pem: 
ipsec/ipsec.pem: 
Example with trust keyword:
admin:show cert list trust
tomcat-trust/mygroup-lab1-ctrs.cisco.com.pem: 
show cert own

show cert own name
Syntax Description

name

The name of the digital security certificate

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display a digital security certificate owned by the CTRS.

Examples
admin:show cert own tomcat/tomcat.pem
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            6f:f2:01:1a:af:87:95:ee
        Signature Algorithm: sha1WithRSAEncryption
        Issuer: CN=mygroup-lab1-ctrs.cisco.com, OU=TSBU, O=Cisco, L=San Jose, ST=CA, C=US
        Validity
            Not Before: Jun  6 18:17:50 2011 GMT
            Not After : Jun  6 18:17:50 2016 GMT
        Subject: CN=mygroup-lab1-ctrs.cisco.com, OU=TSBU, O=Cisco, L=San Jose, ST=CA, C=US
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
            RSA Public Key: (2048 bit)
                Modulus (2048 bit):
                    00:b3:ae:ee:55:6d:82:93:01:a6:3c:66:f1:5e:3d:
                    43:be:52:0a:8f:d0:5b:c8:bd:0f:cb:cf:82:b0:b6:
                    66:37:0c:1a:32:42:72:16:e0:f3:ee:70:ce:d1:ee:
                    4f:3d:65:d2:af:64:47:93:62:02:55:76:f1:91:a2:
                    b6:68:8d:92:86:6f:d4:7d:3e:28:56:eb:e9:2b:4f:
                    42:0f:d3:bd:ea:5b:3a:4b:b5:b8:2d:c0:2b:21:46:
                    df:01:53:b1:fa:5e:53:ac:b4:87:e9:75:0c:c0:88:
                    13:69:f2:26:c2:a4:7d:23:e8:a6:99:a1:fa:ac:86:
                    34:08:fa:90:5d:f7:86:e3:4f:c7:be:00:d4:cd:d3:
                    c3:78:3d:3b:7c:35:84:1b:6f:f8:96:8b:41:bd:f1:
                    7e:7a:df:c3:1c:c9:96:d8:83:12:83:1e:8c:72:df:
                    44:d4:ae:2f:96:bd:f7:51:7e:f1:6b:a2:6e:33:77:
                    22:59:09:86:c1:50:d5:5f:35:78:d1:b6:9b:05:09:
                    e3:ff:a8:ee:0b:2a:78:df:04:22:bb:04:59:84:7d:
                    99:f6:99:ac:51:aa:aa:53:cc:43:dc:7a:80:f3:8e:
                    80:fc:d0:40:30:78:fe:28:2d:e1:ff:b0:b4:30:d1:
                    ca:2e:6a:46:7c:d8:ea:21:e3:ac:ae:f3:13:5c:ea:
                    64:61
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Key Usage: 
            Digital Signature, Key Encipherment, Data Encipherment, Key Agreement, 
Certificate Sign
            X509v3 Extended Key Usage: 
            TLS Web Server Authentication, TLS Web Client Authentication, IPSec End System
            X509v3 Subject Key Identifier: 
            69:A1:51:53:3D:26:1E:93:4B:7F:B3:71:FD:8A:A7:34:9D:C1:75:02
    Signature Algorithm: sha1WithRSAEncryption
        64:74:4e:e1:1d:ae:0a:67:99:2c:05:a7:37:8f:db:b1:19:fe:
        08:21:9c:50:16:eb:51:f4:b9:48:c4:2e:ac:6b:e0:4f:44:32:
        f9:f0:21:91:19:5b:4d:f8:a9:8c:d3:c1:8a:ab:13:02:e8:44:
        a5:12:3b:be:a8:da:e2:a1:6c:93:d5:a3:92:44:c9:1d:f8:7f:
        75:49:b3:88:e6:fe:c7:34:32:5e:bd:21:54:fe:ca:8c:14:88:
        a4:4b:17:42:0f:d5:e2:e8:df:f2:03:19:47:76:94:d6:7b:fc:
        d8:36:04:15:ce:3e:21:a2:69:a0:f6:4b:0e:9e:1c:1d:3e:65:
        a1:d6:0c:b4:18:fa:27:8a:8f:7c:2c:23:eb:c9:0f:c4:c1:8a:
        eb:a7:c8:a9:7b:e1:c1:a3:1a:dd:b3:02:96:cb:b1:71:b2:1f:
        11:70:c6:ca:88:03:50:e5:f9:61:07:64:63:5a:46:7e:2e:30:
        3f:9b:77:d0:00:01:ca:b7:a0:34:33:30:58:18:22:f8:cb:bf:
        6a:40:a3:1d:e5:dd:d0:bd:d9:ae:3c:c5:2e:51:87:0e:c2:b4:
        ae:35:d4:09:82:76:7f:fc:f7:a7:24:c8:90:2c:6e:fc:65:c9:
        48:c9:5d:be:9a:f6:2f:00:2f:d8:36:3f:4d:78:67:be:a9:b9:
        7b:d8:4d:3e
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
show cert trust

show cert trust name
Syntax Description

name

The name of the digital security certificate

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display a digital security certificate trusted by the CTRS.

Examples
admin:show cert trust tomcat-trust/mygroup-lab1-ctrs.cisco.com.pem
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            6f:a2:03:1a:ae:82:95:e8
        Signature Algorithm: sha1WithRSAEncryption
        Issuer: CN=mygroup-lab1-ctrs.cisco.com, OU=TSBU, O=Cisco, L=San Jose, ST=CA, C=US
        Validity
            Not Before: Jun  6 18:17:50 2011 GMT
            Not After : Jun  6 18:17:50 2016 GMT
        Subject: CN=mygroup-lab1-ctrs.cisco.com, OU=TSBU, O=Cisco, L=San Jose, ST=CA, C=US
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
            RSA Public Key: (2048 bit)
                Modulus (2048 bit):
                    00:ba:ae:7f:55:6d:82:93:01:a6:3c:66:f1:5e:3d:
                    43:be:52:0a:8f:d0:5b:c8:bd:0f:cb:cf:82:b0:b6:
                    66:37:0c:1a:32:42:72:16:e0:a5:ee:70:ce:d1:ee:
                    4f:3d:65:d2:af:64:47:93:62:02:55:76:f1:91:a2:
                    b6:68:8d:92:82:6f:d4:7d:3e:28:56:eb:e9:2b:4f:
                    42:0f:d3:bd:ea:5b:3a:4b:b5:b8:2d:c0:2b:21:46:
                    df:01:53:b1:fa:5e:53:ac:b4:87:e9:75:0c:c0:88:
                    13:69:f2:26:c2:a4:7d:61:e8:16:99:a1:fa:ac:86:
                    34:08:fa:90:5d:f7:86:e3:4f:c7:be:00:d4:cd:d3:
                    c3:78:3d:3b:7c:35:84:1b:6f:f8:96:8b:41:bd:f1:
                    7e:7a:df:c3:1c:c9:96:d8:83:12:83:1f:8c:72:df:
                    44:d4:ae:2f:96:bd:f7:51:7e:f1:6b:b0:6e:33:77:
                    22:59:09:86:c1:50:d5:5f:35:78:d1:b6:9b:05:09:
                    e3:ff:a8:ee:0b:2a:78:df:04:22:bb:04:59:84:2d:
                    99:f6:99:ac:51:aa:aa:53:cc:43:dc:7a:80:f3:8e:
                    80:fc:d0:40:30:78:fe:28:2d:e1:ff:b0:b4:30:d1:
                    ca:2e:6a:46:7c:d8:ea:21:e3:ac:ae:f3:13:5c:ea:
                    64:61
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Key Usage: 
            Digital Signature, Key Encipherment, Data Encipherment, Key Agreement, 
Certificate Sign
            X509v3 Extended Key Usage: 
            TLS Web Server Authentication, TLS Web Client Authentication, IPSec End System
            X509v3 Subject Key Identifier: 
            69:B1:5a:53:FD:26:1E:93:6B:7F:B3:71:AD:8D:A7:34:CD:C1:75:02
    Signature Algorithm: sha1WithRSAEncryption
        64:74:4e:c1:1d:ae:0a:67:99:2c:02:a7:37:8f:db:b1:19:fe:
        08:21:9c:50:16:eb:51:f4:b9:48:c4:2e:ac:6b:e0:4f:44:32:
        f9:f0:21:91:19:4b:4d:f8:a9:8c:d3:c1:8a:ab:13:02:e8:44:
        a5:12:3b:be:a8:da:e2:a1:6c:93:d5:a3:92:44:c9:1d:f8:7f:
        75:49:b3:88:e6:fe:c7:04:32:5e:bd:27:54:fe:ca:8c:14:88:
        a4:4b:17:42:0f:d5:e2:e8:df:f2:03:19:47:76:94:d6:7b:fc:
        d8:36:04:15:ce:3f:21:a2:69:a0:f6:4b:0e:9e:1c:1d:3e:65:
        a1:d6:0c:b4:18:fa:27:8a:8f:6c:2c:23:eb:c9:0f:c4:c1:8a:
        eb:a7:c8:a9:7b:e1:c1:a3:1a:dd:b3:02:96:cb:b1:71:b2:1f:
        11:70:c6:ca:88:03:50:e5:f9:61:07:64:65:5a:46:7f:2e:30:
        3f:9b:77:d0:00:01:ca:b7:a0:34:33:30:58:18:22:f8:cb:bf:
        6a:40:a3:1d:e5:dd:f0:bd:d9:ae:3c:c5:2e:51:87:0e:c2:b4:
        ae:35:d4:09:82:76:7f:fc:f7:a7:24:c8:90:2c:62:fc:65:c9:
        48:c9:5d:be:9a:f6:2f:00:2f:d8:36:3f:4d:78:67:be:a9:b9:
        7b:d8:4d:3e
show cli pagination

show cli pagination
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to check the status of automatic pagination.

Examples
admin: show cli pagination
Automatic Pagination : Off
show csr list

show csr list own
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display a list of active Certificate Signing Requests (CSRs) requesting digital security certificates from a Certificate Authority Proxy Function (CAPF) server.

Examples
admin:show csr list own
tomcat/tomcat.csr
show csr own

show csr own name
Syntax Description

name

The name of the Certificate Signing Request (CSR)

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display a Certificate Signing Request (CSR) requesting a digital security certificate from a Certificate Authority Proxy Function (CAPF) server.

Examples
admin:show csr own tomcat/tomcat.csr
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
show date

show date
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to view the date and time configured on the CTRS.

Examples
admin:show date 
Tue Jul 12 15:03:49 PDT 2011
show diskalertthreshold

show diskalertthreshold
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to show the disk percent usage that will trigger an alert to an administrator.

Examples
admin: show diskalertthreshold
Disk Alert Threshold: 80
Alert Admin at Email:
show diskusage activelog

show diskusage activelog [file fname] [directory] [sort]
Syntax Description

file fname

Save output in a file format.

directory

View directory sizes only, in 1024 byte blocks.

sort

Sort output by size.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the active log directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples
admin:show diskusage activelog 
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?
show diskusage common

show diskusage common [file fname] [directory] [sort]
Syntax Description

file fname

Save output in a file format.

directory

View directory sizes only, in 1024 byte blocks.

sort

Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the common directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples
admin:show diskusage common
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)
show diskusage inactivelog

show diskusage inactivelog [file fname] [directory] [sort]
Syntax Description

file fname

Save output in a file format.

directory

View directory sizes only, in 1024 byte blocks.

sort

Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the inactive directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view inactivelog command.

Examples
admin:show diskusage inactivelog 
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?
show diskusage install

show diskusage install [file fname] [directory] [sort]
Syntax Description

file fname

Save output in a file format. The file will be saved as platform/cli/fname.

directory

View directories only in 1024 byte blocks.

sort

Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the install directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view install command.

Examples
admin:show diskusage install
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?
show diskusage tmp

show diskusage tmp [file fname] [directory] [sort]
Syntax Description

file fname

Save output in a file format. The file will be saved as platform/cli/fname.

directory

View directories only in 1024 byte blocks.

sort

Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the temporary directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples
admin:show diskusage tmp
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?
show diskspace left

show diskspace left
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the amount of media diskspace left.

Examples
admin:show diskspace left
Disk Space: 621G
show diskspace used

show diskspace used
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the amount of media diskspace used.

Examples
admin:show diskspace used
Disk Space: 18G
show environment fans

show environment fans
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display the status of the fans in the CTRS

Examples
admin:show environment fans
(RPMS)                    Lower
                         Critical
     ID        Current   Threshold    Status
Fan Sensor 1    1875        250  OK
Fan Sensor 2    1400        250  OK
Fan Sensor 3    2300        250  OK
show environment power-supply

show environment power-supply
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display the status of the power supplies in the CTRS

Examples
admin:show environment power-supply
ID      Status
Power Supply 1  OK
Power Supply 2  Error
show environment temperatures

show environment temperatures
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display data from the CTRS temperature sensors. Temperature data is displayed in degrees Celsius, along with non-critical and critical temperature thresholds for each sensor.

Examples
admin:show environment temperatures
(Celcius)                      Non-Critical      Critical
                                Threshold       Threshold
         ID          Current  Lower   Upper   Lower   Upper  Location
Temperature Sensor 2    24      37      38      39      45      1
show hardware

show hardware
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display basic platform hardware information.

Examples
admin:show hardware
HW Platform       : 7845H2
Processors        : 2
Type              : Family: Xeon
CPU Speed         : 2333
Memory            : 4096 MBytes
Object ID         : 1.3.6.1.4.1.9.1.586
OS Version        : UCOS 4.0.0.0-27
Serial Number     : 2UX90700FN
RAID Version      :
RAID Firmware Version:  5.26
RAID BIOS Version: N/A
BIOS Information  :
11/01/2008
RAID Details      :
Smart Array P400 in Slot 1
   Bus Interface: PCI
   Slot: 1
   Serial Number: PAFGK0P9VWS6D8
   Cache Serial Number: PA82C0J9SWV3HL
   RAID 6 (ADG) Status: Enabled
   RAID 6 (ADG) Enabler Status: Enabled
   Controller Status: OK
   Chassis Slot: 
   Hardware Revision: Rev E
   Firmware Version: 5.26
   Rebuild Priority: Medium
   Expand Priority: Medium
   Surface Scan Delay: 3 sec
   Cache Board Present: True
   Cache Status: OK
   Accelerator Ratio: 50% Read / 50% Write
   ...
show hdcapable

show hdcapable
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display whether High Definition(HD) video recording is enabled or disabled.

Examples
admin:show hdcapable
HD Capability: Enabled
show ldcapable

show ldcapable
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display whether Low Definition (LD) video recording is enabled or disabled.

Examples
admin:show ldcapable
CIF Capability: Enabled
show logins

show logins [number]
Syntax Description

number

The optional parameter can be used to specify the number of displayed logins. A value of 0 will display all previously saved logins. The default is 20.

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display the last 20 platform admin logins.

Examples
admin:show logins
admin    pts/0        dhcp-171-70-13-1 Tue Dec  1 16:05   still logged in
root     pts/0        pnmars-61.cisco. Tue Dec  1 05:53 - 10:45  (04:52)
show mediasecurity

show mediasecurity
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display the configured box-level security for media.

Examples
admin:show mediasecurity
show memory count

show memory count
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

The command was first documented.

Usage Guidelines

Use this command to display the number of memory modules installed in the CTRS.

Examples
admin:show memory count
Total number of memory modules: 2
show memory modules

show memory modules
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

The command was first documented.

Usage Guidelines

Use this command to display information about the memory modules installed in the CTRS.

Examples
admin:show memory modules
Bank  Locator   Size  Active Status
BANK03  DIMM03  2048 MB TRUE    OK
BANK11  DIMM11  2048 MB TRUE    OK
show memory size

show memory size
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.8

The command was first documented.

Usage Guidelines

Use this command to display the total amount of RAM, in gigabytes, installed in the CTRS.

Examples
admin:show memory size
Total size of memory: 4.0 GB
show myself

show myself
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display information about the current account. The CLI "set commandcount" and "set logging" commands can be used to modify current account settings.

Examples
admin:show myself
Machine Name    : tsbu-ctrs-dev6
account name    : admin
privilege level : 4
command count   : disabled
logging setting : disabled
show network all

show network all
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display all basic platform network information.

Note You can use the search option to selectively display the output.

Examples
admin:show network all
Ethernet 0
DHCP         : disabled           Status     : up
IP Address   : 172.28.70.109      IP Mask    : 255.255.252.0
Link Detected: yes                Mode       : Auto enabled, Full, 1000 Mbits/s
Duplicate IP : no
DNS
Primary      : 171.70.168.183     Secondary  : Not Configured
Options      : timeout:5 attempts:2
Domain       : cisco.com
Gateway      : 172.28.68.1 on Ethernet 0
172.28.68.0/22 dev eth0  proto kernel  scope link  src 172.28.70.109 
169.254.0.0/16 dev eth0  scope link 
default via 172.28.68.1 dev eth0 
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 localhost:3873              *:*                         LISTEN      
tcp        0      0 *:12102                     *:*                         LISTEN      
tcp        0      0 localhost:8999              *:*                         LISTEN      
tcp        0      0 *:12104                     *:*                         LISTEN      
tcp        0      0 *:5001                      *:*                         LISTEN      
tcp        0      0 *:8009                      *:*                         LISTEN      
tcp        0      0 *:32777                     *:*                         LISTEN      
tcp        0      0 *:32778                     *:*                         LISTEN      
tcp        0      0 localhost:1098              *:*                         LISTEN      
tcp        0      0 *:32780                     *:*                         LISTEN      
tcp        0      0 *:61455                     *:*                         LISTEN      
tcp        0      0 *:webcache                  *:*                         LISTEN      
tcp        0      0 *:61456                     *:*                         LISTEN      
tcp        0      0 *:61457                     *:*                         LISTEN      
tcp        0      0 localhost:8083              *:*                         LISTEN      
...
show network dhcp eth0 status

show network dhcp eth0 status
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

The command was first documented.

Usage Guidelines

Use this command to display the DHCP status for eth0.

Examples
admin:show network dhcp eth0 status
DHCP is disabled for eth0
Host ip address: 192.0.2.0
Net mask: 255.255.255.0
Gateway: 192.0.2.255
show network eth0

show network eth0 [detail] [search searchtxt]
Syntax Description

detail

Shows additional detail, specifically, receive and transmit data for the Ethernet interface.

search searchtxt

Optional search feature. The variable searchtxt is a text string. Output is limited to lines containing the text string. String cannot contain spaces or tabs and is case insensitive.

Command Modes

Admin

Command History

Release

Modification

1.6

The command was first documented.

1.8

The detail and search keywords were added.

Usage Guidelines

Use this command to display some basic platform network information about eth0.

Note You can use the search option to selectively display the output.

Examples
admin:show network eth0 
Ethernet 0
DHCP         : disabled           Status     : up
IP Address   : 172.28.70.109      IP Mask    : 255.255.252.0
Link Detected: yes                Mode       : Auto enabled, Full, 1000 Mbits/s
Duplicate IP : no
DNS
Primary      : 171.70.168.183     Secondary  : Not Configured
Options      : timeout:5 attempts:2
Domain       : cisco.com
Gateway      : 172.28.68.1 on Ethernet 0
show network failover

show network failover
Syntax Description

detail

Shows additional detail.

page

Pauses output after one page.

Command Modes

Admin

Command History

Release

Modification

1.6

This command was first documented.

1.8

The detail and page keywords were added.

Usage Guidelines

Use this command to display NIC Teaming network fault tolerance information.

Examples
admin:show network failover 
Network Fault Tolerance is not configured.
show network ip_conntrack

show network ip_conntrack
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the current utilization of ip_conntrack.

Examples
admin:show network ip_conntrack
35
show network ipprefs all

show network ipprefs all
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that may be used on the product.

Examples
admin:show network ipprefs all
Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  
------------ ------------ ------------ ------------ ------------ ------------ ------------ 
sshd         tcp          22           public       -            enabled      sftp and ssh 
access 
racoon       esp          -            public       -            disabled     ipsec 
traffic 
racoon       udp          500          public       -            disabled     ipsec setup 
port 
tomcat       tcp          8443         translated   443          enabled      secure web 
access 
tomcat       tcp          8080         translated   80           enabled      web access   
ntpd         udp          123          public       -            enabled      network time 
sync 
dhcp6c       udp          546          public       -            disabled     DHCPv6 
client 
netdump      udp          6666         public       -            disabled     this port 
needs to be open on systems running the netdump server 
database     tcp          1533         public       -            enabled      database 
partA port 
database     tcp          1534         public       -            disabled     database 
partB port 
snmp         udp          161          public       -            disabled     snmp port    
jboss        tcp          1044         public       -            disabled     jboss debug 
port 
ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 
ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 
...
show network ipprefs enabled

show network ipprefs enabled
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that are currently opened.

Examples
admin:show network ipprefs enabled
Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  
------------ ------------ ------------ ------------ ------------ ------------ ------------ 
sshd         tcp          22           public       -            enabled      sftp and ssh 
access 
tomcat       tcp          8443         translated   443          enabled      secure web 
access 
tomcat       tcp          8080         translated   80           enabled      web access   
ntpd         udp          123          public       -            enabled      network time 
sync 
database     tcp          1533         public       -            enabled      database 
partA port 
ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 
ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 
show network ipprefs public

show network ipprefs public
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that are currently opened for any remote client.

Examples
admin:show network ipprefs public
Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  
------------ ------------ ------------ ------------ ------------ ------------ ------------ 
sshd         tcp          22           public       -            enabled      sftp and ssh 
access 
tomcat       tcp          8443         translated   443          enabled      secure web 
access 
tomcat       tcp          8080         translated   80           enabled      web access   
ntpd         udp          123          public       -            enabled      network time 
sync 
database     tcp          1533         public       -            enabled      database 
partA port 
ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 
ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 
show network max_ip_conntrack

show network max_ip_conntrack
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display ip_conntrack_max information.

Examples
admin:show network max_ip_conntrack
65536
show network route

show network route [detail] [search searchtxt]
Syntax Description

detail

Shows additional detail.

search searchtxt

Optional search feature. The variable searchtxt is a text string. Output is limited to lines containing the text string. String cannot contain spaces or tabs and is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

1.8

The detail and search keywords were added.

Usage Guidelines

Use this command to display basic network route information.

Examples
admin:show network route
10.94.150.0/24 dev eth0  proto kernel  scope link  src 10.94.150.94
169.254.0.0/16 dev eth0  scope link
default via 10.94.150.1 dev eth0
Example with optional detail keyword:
admin:show network route detail
10.22.148.0/24 dev eth0  proto kernel  scope link  src 10.22.148.144 
169.254.0.0/16 dev eth0  scope link 
default via 10.22.148.1 dev eth0 
broadcast 127.255.255.255 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
broadcast 10.22.148.255 dev eth0  table local  proto kernel  scope link  src 10.22.148.144 
broadcast 169.254.0.0 dev usb0  table local  proto kernel  scope link  src 169.254.1.102 
local 10.22.148.144 dev eth0  table local  proto kernel  scope host  src 10.22.148.144 
local 169.254.1.102 dev usb0  table local  proto kernel  scope host  src 169.254.1.102 
broadcast 169.254.255.255 dev usb0  table local  proto kernel  scope link  src 
169.254.1.102 
broadcast 10.22.148.0 dev eth0  table local  proto kernel  scope link  src 10.22.148.144 
broadcast 127.0.0.0 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
local 127.0.0.1 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
local 127.0.0.0/8 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
local ::1 via :: dev lo  proto none  metric 0  mtu 16436 advmss 16376 hoplimit 64
local fe80::e41f:13ff:fe29:79e3 via :: dev lo  proto none  metric 0  mtu 16436 advmss 
16376 hoplimit 64
local fe80::e61f:13ff:fe30:29e0 via :: dev lo  proto none  metric 0  mtu 16436 advmss 
16376 hoplimit 64
fe80::/64 dev usb0  metric 256  expires 2125938sec mtu 1500 advmss 1440 hoplimit 64
fe80::/64 dev eth0  metric 256  expires 2125939sec mtu 1500 advmss 1440 hoplimit 64
ff02::1:2 via ff02::1:2 dev eth0  metric 0 
    cache  mtu 1500 advmss 1440 hoplimit 1
ff00::/8 dev usb0  metric 256  expires 2125938sec mtu 1500 advmss 1440 hoplimit 1
ff00::/8 dev eth0  metric 256  expires 2125939sec mtu 1500 advmss 1440 hoplimit 1
unreachable default dev lo  proto none  metric -1  error -101 hoplimit 255
show network status

show network status [detail] [listen] [process] [all] [nodns] [search searchtxt]
Syntax Description

detail

Displays additional information.

listen

Displays information only about listening sockets.

process

Displays the process ID and the name of the program to which each socket belongs.

all

Displays information about both listening and non-listening sockets.

nodns

Displays numerical addresses without any DNS information.

search searchtxt

Optional search feature, The variable searchtxt is a text string. Output is limited to lines containing the text string. String cannot contain spaces or tabs and is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

1.8

The detail, listen, process, all, and nodns keywords added.

Usage Guidelines

Use this command to display basic platform network status information.

Examples
admin:show network status
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 tsbu-ctrs-dev6.cisco.:41626 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
tcp        0      0 tsbu-ctrs-dev6.cisco.:41627 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
tcp        0      0 tsbu-ctrs-dev6.cisco.:41624 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  3      [ ]         DGRAM                    7948   /dev/log2
unix  2      [ ]         DGRAM                    28530 
Example with optional search feature:
admin:show network status cisco.com
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 tsbu-ctrs-dev6.cisco.:41626 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
tcp        0      0 tsbu-ctrs-dev6.cisco.:41627 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
tcp        0      0 tsbu-ctrs-dev6.cisco.:41624 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  3      [ ]         DGRAM                    7948   /dev/log2
unix  2      [ ]         DGRAM                    28530  
/usr/local/platform/conf/clm/unix_socket
unix  11     [ ]         DGRAM                    7809   /dev/log
unix  2      [ ]         DGRAM                    4001   @udevd
unix  2      [ ]         DGRAM                    1173292 
unix  2      [ ]         DGRAM                    1171540 
show open files all

show open files all
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all open files on the CTRS.

Examples
admin:show open files all
Executing.. please wait.
COMMAND     PID     USER   FD      TYPE     DEVICE        SIZE       NODE NAME
init          1     root  cwd       DIR      104,2        4096          2 /
init          1     root  rtd       DIR      104,2        4096          2 /
init          1     root  txt       REG      104,2       31216    3997776 /sbin/init
init          1     root  mem       REG      104,2       52400    2277509 
/lib/libsepol.so.1
init          1     root  mem       REG      104,2     1539036    2277466 
/lib/tls/libc-2.3.4.so
init          1     root  mem       REG      104,2      110984    2277391 /lib/ld-2.3.4.so
init          1     root  mem       REG      104,2       55000    2277498 
/lib/libselinux.so.1
init          1     root   10u     FIFO       0,13                   1203 /dev/initctl
migration     2     root  cwd       DIR      104,2        4096          2 /
migration     2     root  rtd       DIR      104,2        4096          2 /
migration     2     root  txt   unknown                                   /proc/2/exe
ksoftirqd     3     root  cwd       DIR      104,2        4096          2 /
ksoftirqd     3     root  rtd       DIR      104,2        4096          2 /
ksoftirqd     3     root  txt   unknown                                   /proc/3/exe
migration     4     root  cwd       DIR      104,2        4096          2 /
migration     4     root  rtd       DIR      104,2        4096          2 /
migration     4     root  txt   unknown                                   /proc/4/exe
ksoftirqd     5     root  cwd       DIR      104,2        4096          2 /
ksoftirqd     5     root  rtd       DIR      104,2        4096          2 /
ksoftirqd     5     root  txt   unknown                                   /proc/5/exe
migration     6     root  cwd       DIR      104,2        4096          2 /
migration     6     root  rtd       DIR      104,2        4096          2 /
migration     6     root  txt   unknown                                   /proc/6/exe
ksoftirqd     7     root  cwd       DIR      104,2        4096          2 /
ksoftirqd     7     root  rtd       DIR      104,2        4096          2 /
ksoftirqd     7     root  txt   unknown                                   /proc/7/exe
migration     8     root  cwd       DIR      104,2        4096          2 /
migration     8     root  rtd       DIR      104,2        4096          2 /
migration     8     root  txt   unknown                                   /proc/8/exe
show open files process

show open files process {processID1,processID2...}
Syntax Description

processID1...

Process ID numbers. To show information about more than one process, separate process ID numbers with a comma.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all open files on the device belonging to the indicated processes.

Examples
admin:show open files process 3886,4086
COMMAND   PID USER   FD   TYPE     DEVICE    SIZE    NODE NAME
arpmond  3886 root  cwd    DIR      104,2    4096       2 /
arpmond  3886 root  rtd    DIR      104,2    4096       2 /
arpmond  3886 root  txt    REG      104,2   19483  328533 
/usr/local/os-services/sbin/arpmond
arpmond  3886 root  mem    REG      104,2  110984 2277391 /lib/ld-2.3.4.so
arpmond  3886 root  mem    REG      104,2 1539036 2277466 /lib/tls/libc-2.3.4.so
arpmond  3886 root    0r   CHR        1,3            1930 /dev/null
arpmond  3886 root    1w   CHR        1,3            1930 /dev/null
arpmond  3886 root    2w   CHR        1,3            1930 /dev/null
arpmond  3886 root    3u  sock        0,4            7384 can't identify protocol
arpmond  3886 root    4u  sock        0,4            7742 can't identify protocol
arpmond  3886 root    5wW  REG      104,2       4 4030838 /var/lock/subsys/.arpmond
arpmond  3886 root    6u  unix 0xf69e7dc0            7741 socket
arpmond  3886 root    7u  sock        0,4            7632 can't identify protocol
ipprefsd 4086 root  cwd    DIR      104,2    4096       2 /
ipprefsd 4086 root  rtd    DIR      104,2    4096       2 /
ipprefsd 4086 root  txt    REG      104,2  132789  328534 
/usr/local/os-services/sbin/ipprefsd
ipprefsd 4086 root  mem    REG      104,2  105824 2277470 /lib/tls/libpthread-2.3.4.so
ipprefsd 4086 root  mem    REG      104,2  717778  511070 
/usr/local/platform/lib/libstlport.so.5.1
ipprefsd 4086 root  mem    REG      104,2  211948 2277468 /lib/tls/libm-2.3.4.so
ipprefsd 4086 root  mem    REG      104,2   47404 2277426 /lib/libnss_files-2.3.4.so
ipprefsd 4086 root  mem    REG      104,2  110984 2277391 /lib/ld-2.3.4.so
ipprefsd 4086 root  mem    REG      104,2   38624 2277378 
/lib/libgcc_s-3.4.6-20060404.so.1
ipprefsd 4086 root  mem    REG      104,2 1539036 2277466 /lib/tls/libc-2.3.4.so
ipprefsd 4086 root    0r   CHR        1,3            1930 /dev/null
ipprefsd 4086 root    1w   CHR        1,3            1930 /dev/null
ipprefsd 4086 root    2w   CHR        1,3            1930 /dev/null
ipprefsd 4086 root    3u  unix 0xf69e7bc0            7791 /tmp/ipprefs.socket
show open files regexp

show open files regexp "string"
Syntax Description

"string"

Regular expression identifying string. String value must be included inside quotation marks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all open files on the device that match the regular expression as defined by the string value.

Examples
admin:show open files regexp "Cisco"
Executing.. please wait.
syslogd    4174     root   10u     FIFO      104,2                4030835 
/var/CiscoSyslogFifo
snmpd      8642     root    6r     FIFO      104,2                4030835 
/var/CiscoSyslogFifo
java      29187    admin  mem       REG      104,2       46642     511301 
/usr/local/platform/jar/CiscoIPSec.jar
show open ports all

show open ports all
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all open ports on the device.

Examples
admin:show open ports all
Executing.. please wait.
COMMAND     PID     USER   FD   TYPE  DEVICE SIZE NODE NAME
sshd       4355     root    3u  IPv6    8294       TCP *:ssh (LISTEN)
dhparent2  4577     root    4u  IPv4    8955       TCP *:12104 (LISTEN)
java       4624     root    4u  IPv4    8955       TCP *:12104 (LISTEN)
post_proc  4656     root    4u  IPv4    8955       TCP *:12104 (LISTEN)
post_proc  4656     root    6u  IPv4    9013       TCP *:61456 (LISTEN)
ccs        5380     root    4u  IPv4    8955       TCP *:12104 (LISTEN)
ccs        5380     root    7u  IPv4    9817       TCP *:12102 (LISTEN)
ccs        5380     root    8u  IPv4    9899       TCP *:61455 (LISTEN)
ccs        5380     root    9u  IPv4    9901       TCP *:61457 (LISTEN)
keyExchan  5528     root    4u  IPv4    8955       TCP *:12104 (LISTEN)
cmahostd   7766     root    4u  IPv4 1177318       UDP *:49152 
cmapeerd   7936     root    3u  IPv4   15503       UDP 127.0.0.1:25376 
cmanicd    8111     root    3u  IPv4   16564       UDP 127.0.0.1:25393 
snmpd      8642     root    7u  IPv4   16654       TCP *:61461 (LISTEN)
snmpd      8642     root    9u  IPv4   16672       UDP 127.0.0.1:25375 
snmpd      8642     root   10u  IPv4   16675       UDP *:snmp 
clm        9600     root    6u  IPv4   28528       UDP *:8500 
clm        9600     root    7u  IPv4   28529       TCP *:8500 (LISTEN)
racoon     9603     root    7u  IPv6   27678       UDP [fe80::223:7dff:fe62:b15a]:isakmp 
racoon     9603     root    8u  IPv6   27680       UDP [::1]:isakmp 
racoon     9603     root    9u  IPv4   27681       UDP 172.28.70.109:isakmp 
racoon     9603     root   10u  IPv4   27682       UDP 127.0.0.1:isakmp 
servM      9608  servmgr    6u  IPv4   27894       TCP 127.0.0.1:8888 (LISTEN)
servM      9608  servmgr    7u  IPv4   27897       TCP 127.0.0.1:8889 (LISTEN)
ntpd      10800      ntp    4u  IPv4   28111       UDP *:ntp 
ntpd      10800      ntp    5u  IPv6   28112       UDP *:ntp 
ntpd      10800      ntp    6u  IPv4   28113       UDP 127.0.0.1:ntp 
ntpd      10800      ntp    7u  IPv4   28114       UDP 172.28.70.109:ntp 
oninit    11160 informix    4u  IPv4   28738       TCP 172.28.70.109:tsbu_ctrs_dev6_ctis 
(LISTEN)
oninit    11160 informix    6u  IPv4 1177195       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41751 (ESTABLISHED)
show open ports regexp

show open ports regexp "string"
Syntax Description

"string"

Regular expression identifying string. String value must be included inside quotation marks.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all open ports on the device that match the regular expression as defined by the string value.

Examples
admin:show open ports regexp "informix"
Executing.. please wait.
oninit    11160 informix    4u  IPv4   28738       TCP 172.28.70.109:tsbu_ctrs_dev6_ctis 
(LISTEN)
oninit    11160 informix    6u  IPv4 1177195       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41751 (ESTABLISHED)
oninit    11160 informix    7u  IPv4 1177197       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41752 (ESTABLISHED)
oninit    11160 informix    8u  IPv4 1177199       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41753 (ESTABLISHED)
oninit    11160 informix    9u  IPv4 1177201       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41754 (ESTABLISHED)
oninit    11160 informix   10u  IPv4 1177203       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41755 (ESTABLISHED)
oninit    11160 informix   11u  IPv4 1177205       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41756 (ESTABLISHED)
oninit    11160 informix   12u  IPv4 1177207       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41757 (ESTABLISHED)
show packages

show packages {active name | active *} | {inactive name | inactive *}
Syntax Description

active name

Retrieves the version number for a specific package on the active partition.

active *

Retrieves the version numbers for all packages on the active partition.

inactive name

Retrieves the version number for a specific package on the inactive partition.

inactive *

Retrieves the version number for all packages on the inactive partition.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the version number of one or more packages on the active side or inactive partition.

Examples
admin:show packages active jdk
Active Side Package(s): for jdk package(s)
jdk-1.5.0_17-fcs
admin: show packages inactive jdk
Inactive Side Package(s): for jdk package(s)
jdk-1.5.0_14-fcs
show password age

show password age
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays the value of the maximum and minimum password age for OS admin accounts in days.

Examples
admin:show password age
Maximum Password Age is : 99999 days
Minimum Password Age is : 0 days
show password complexity character

show password complexity character
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays whether or not the password complexity feature is enabled or disabled.

When enabled, passwords will need to meet the following guidelines:

•At least one lower-case character,

•At least one uppercase, one digit and one special character.

•A string of adjacent characters on the keyboard will not be accepted.

•Any of the previous ten passwords cannot be reused.

•The admin user password can only be changed only once in 24 hours.

Examples
admin:show password complexity character
Password complexity for characters to be used in the OS user passwords is disabled.
Therefore passwords does not need to have a mixture of numbers, special characters,
capital and small letters.
show password complexity length

show password complexity length
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays the password minimum length for OS accounts. The default value is 6.

Examples
admin:show password complexity length
Minimum Password Length is : 6
show password expiry maximum-age

show password expiry maximum-age
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays whether or not the maximum age password expiry feature for OS accounts is enabled or disabled, and what the current configured parameters are for that feature.

Examples
admin:show password expiry maximum-age
Password expiry : Enabled and is currently set to 99999 days
show password expiry minimum-age

show password expiry minimum-age
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays whether or not the minimum age password expiry feature for OS accounts is enabled or disabled, and what the current configured parameters are for that feature.

Examples
admin:show password expiry minimum-age
Minimum Password Age Settings: Enabled and is currently set to 0 day(s)
show password expiry user maximum-age

show password expiry user maximum-age userid
Syntax Description

userid

The user ID of the user account

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays whether or not the maximum age password expiry feature for a specific user account is enabled or disabled, and what the current configured parameters are for that features.

Examples
admin:show password expiry user maximum-age admin
Password expiry for admin: Enabled and is currently set to 99999 days
show password expiry user minimum-age

show password expiry user minimum-age userid
Syntax Description

userid

The user ID of the user account

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays whether or not the minimum age password expiry feature for a specific user account is enabled or disabled, and what the current configured parameters are for that feature.

Examples
admin:show password expiry user minimum-age admin
Password expiry for admin: Enabled and is currently set to 0 days
show password history

show password history
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display whether password history maintenance is enabled or disabled, and how many previous password configurations are stored.

Examples
admin:show password history
Password history maintenance is enabled.
Configured value: 10
show password inactivity

show password inactivity
Syntax Description

none

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

This command displays the status of the password inactivity feature for OS accounts. Password inactivity is the number of days of inactivity after a password has expired before the account is disabled.

Examples
admin:show password inactivity
Password Inactivity : Disabled
show process list

show process list [file name] [detail] [vm]
Syntax Description

file name

Saves output in a separate file.

detail

Displays detailed process information, such as process page fault, virtual memory and start time.

vm

Displays process virtual memory.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the list of all processes and critical information about each of them. This command also displays the parent-child relationship between these processes.

Use the detail option to see a more detailed view of these processes.

Use the file name option to redirect the output of this command.

Examples
admin:show process list 
...
 5758 /usr/sbin/racoon -F -f /etc/racoon/racoon.conf
 5759 /usr/local/platform/bin/servM
 7035  \_ /usr/local/cm/bin/dbmon
 7985  \_ /usr/local/cm/bin/cdpd -f
 8045  \_ /usr/local/platform/bin/enStart
 8255  \_ /usr/local/platform/bin/certM
 8514  \_ /usr/local/cm/bin/cdragent /usr/local/cm/conf/cdragent/cdragentCfg.xml
 8538  \_ /usr/local/cm/bin/RisDC
 8551  \_ /usr/local/cm/bin/amc /usr/local/cm/conf/amc/amcCfg.xml
 8695  \_ /usr/local/cm/bin/ctftp
 6627 /usr/local/cm/bin/cmoninit
 6628  \_ /usr/local/cm/bin/cmoninit
 6629      \_ /usr/local/cm/bin/cmoninit
 6630      \_ /usr/local/cm/bin/cmoninit
 6631      \_ /usr/local/cm/bin/cmoninit
 6632      \_ /usr/local/cm/bin/cmoninit
 ...
show process load

show process load [cpu | memory | time] [cont] [clear] [noidle] [page] [thread]
[num number | num all]
Syntax Description

cont

Repeats the command continuously.

clear

Screen clears before displaying output.

cpu

Sorts output by CPU usage. If no options are specified, this is the default.

Note This option cannot be combined with other options.

memory

Sorts output by memory usage.

Note This options cannot be combined with other options.

noidle

Command ignores the idle/zombie processes

page

Pauses output.

thread

Displays threads.

time

Sorts output by time usage.

Note This option cannot be combined with other options.

num number

Defines the number of processes to display; minimum value is 1, default is 10.

num all

Displays all processes.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the current system load including the number of processes using the most CPU, memory or time.

Note The following options cannot be combined with other command options: cpu, memory or time. If more than one is specified, the last one will be used. If none is specified, cpu will be shown.

Examples
admin:show process load num 10
 22:11:35  up  7:50,  4 users,  load average: 0.00, 0.00, 0.00
75 processes: 74 sleeping, 1 running, 0 zombie, 0 stopped
CPU states:  cpu    user    nice  system    irq  softirq  iowait    idle
           total    1.9%    0.0%    0.9%   0.9%     0.0%   10.6%   85.4%
Mem:   511988k av,  494364k used,   17624k free,       0k shrd,   46104k buff
                    354932k actv,   67572k in_d,    6848k in_c
Swap: 2048248k av,   17984k used, 2030264k free                  269444k cached
  PID USER     PRI  NI  SIZE  RSS SHARE STAT %CPU %MEM   TIME CPU COMMAND
13993 admin     24   0  1152 1152   888 R     1.9  0.2   0:00   0 top
    1 root      15   0   512  480   448 S     0.0  0.0   0:04   0 init
    2 root      RT   0     0    0     0 SW    0.0  0.0   0:00   0 migration/0
    3 root      15   0     0    0     0 SW    0.0  0.0   0:00   0 keventd
    4 root      15   0     0    0     0 SW    0.0  0.0   0:03   0 kapmd
    5 root      34  19     0    0     0 SWN   0.0  0.0   0:00   0 ksoftirqd/0
    8 root      25   0     0    0     0 SW    0.0  0.0   0:00   0 bdflush
    6 root      15   0     0    0     0 SW    0.0  0.0   0:01   0 kswapd
    7 root      15   0     0    0     0 SW    0.0  0.0   0:00   0 kscand
    9 root      15   0     0    0
show process name

show process name process-name [file name] [cont] [detail | vm ]
Syntax Description

process-name

Identifies a specific process.

file name

Saves output in a separate file.

cont

Repeats the command continuously.

detail

Displays detailed process information, such as virtual memory, and start time.

vm

Displays the process virtual memory.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the details of processes that share the same name. This command displays the parent-child relationship.

Examples
admin:show process name servM detail
  PID  PPID TID %CPU %MEM S USER    MINFL  MAJFL  RSS   VSZ                  STARTED 
COMMAND
 7280     1 -  0.1  0.3 S servmgr   21909   1962 7432 86140 Mon Jan 14 10:53:25 2008 
/usr/local/platform/bin/servM
show process open-fd

show process open-fd process-ID [file name] [cont]
Syntax Description

process-ID

Identifies a specific process.

file name

Saves output in a separate file.

cont

Repeats the command continuously.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the open file descriptors for a comma-separated list of process IDs.

Examples
admin: show process open-fd 10554
COMMAND     PID USER   FD   TYPE DEVICE     SIZE    NODE NAME
ntp_start 10554 root  cwd    DIR    8,1     4096       2 /
ntp_start 10554 root  rtd    DIR    8,1     4096       2 /
ntp_start 10554 root  txt    REG    8,1   585908  506215 /bin/bash
ntp_start 10554 root  mem    REG    8,1    13601 1077403 /lib/libdl-2.3.2.so
ntp_start 10554 root  mem    REG    8,1  1516255  587978 /lib/tls/libc-2.3.2.so
ntp_start 10554 root  mem    REG    8,1     5848   49258 /lib/csa/sse2/sse2_boost.so.1
ntp_start 10554 root  mem    REG    8,1   102480 1077387 /lib/ld-2.3.2.so
ntp_start 10554 root  mem    REG    8,1   124884   49255 /lib/csa/libcsa.so.6
ntp_start 10554 root  mem    REG    8,1    50783 1077423 /lib/libnss_files-2.3.2.so
ntp_start 10554 root  mem    REG    8,1    86486  587977 /lib/tls/libpthread-0.60.so
ntp_start 10554 root  mem    REG    8,1    11784 1077461 /lib/libtermcap.so.2.0.8
ntp_start 10554 root  mem    REG    8,1    21436  424691 
/usr/lib/gconv/gconv-modules.cache
ntp_start 10554 root  mem    REG    8,1 32148976  326576 /usr/lib/locale/locale-archive
...
show process pid

show process pid process-ID [file name] [cont] [detail | vm ]
Syntax Description

process-ID

Identifies a specific process.

file name

Saves output in a separate file.

cont

Repeats the command continuously.

detail

Displays detailed process information, such as virtual memory, and start time.

vm

Displays the process virtual memory.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the details of a process with a specified process ID.

Examples
admin:show process pid 3886 vm
PID TTY      STAT   TIME  MAJFL   TRS   DRS  RSS %MEM COMMAND
 3886 ?        S      1:29      0    12  1659  396  0.0 
/usr/local/os-services/sbin/arpmond
show process search

show process search regexp [file name ]
Syntax Description

regexp

Identifies a specific string (regular expression) on which to search.

file name

Saves output in a separate file.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to search for particular patterns in the output of the operating system-specific process listing.

Examples
admin:show process search cisco*
root     10731  7672  0 20:01 pts/0    00:00:00 /bin/bash 
/usr/local/platform/cli_scripts/listProcesses.sh -search cisco*
root     10736 10731  0 20:01 pts/0    00:00:00 grep -i cisco*
show process user

show process user name [file name ] [cont] [detail | vm ]
Syntax Description

name

User identification

file name

Saves output in a separate file.

cont

Repeats the command continuously.

detail

Displays detailed process information, such as virtual memory, and start time.

vm

Displays the process virtual memory.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display details of processes that share the specified user name. This command displays the parent-child relationship.

Examples
admin:show process user admin
  PID  PPID TID %CPU S COMMAND
13342 13341 -  0.0 S cliscript.sh
13423 13342 -  0.4 S java
13689 13423 -  0.0 S  \_ listProcesses.s
13694 13689 -  0.0 R      \_ ps
13424 13342 -  0.0 S java
13425 13342 -  0.0 S java
13426 13342 -  0.0 S java
13427 13342 -  0.0 S java
13428 13342 -  0.1 S java
13429 13342 -  0.0 S java
13430 13342 -  0.0 S java
...
show process using-most cpu

show process using-most cpu [file name] [cont] [number]
Syntax Description

file name

Saves output in a separate file.

cont

Repeats the command continuously.

number

Defines the number of processes to display; default is 5.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display a list of the most CPU-intensive processes.

Examples
admin:show process using-most cpu
1.4   1   0 S 00:00:33 ./jre/bin/java -Djava.compiler=NONE -cp /usr/StorMan/RaidMan.jar 
com.ibm.sysmgt.raidmgr.agent.ManagementAgent
 1.4   1   0 S 00:00:30 /usr/local/cm/bin/amc /usr/local/cm/conf/amcCfg.xml
 1.6   0   0 S 00:00:38 /usr/local/cm/bin/cmoninit
 3.3   0   0 S 00:01:13 /usr/local/cm/bin/RisDC
 6.0   1   0 S 00:02:16 /home/tomcat/tomcat /home/tomcat/tomcatJlauncherConfig.xml 
-Djava.library.path=/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/loca
l/thirdparty/java/j2sdk/jre/lib/i386/server:/usr/lib/pgsql:/usr/lib:/usr/local/cm/lib::/us
r/local/platform/lib -Xmx512m -Xms256m -DLD_ASSUME_KERNEL
show process using-most memory

show process using-most memory [file name ] [cont] [number]
Syntax Description

file name

Saves output in a separate file.

cont

Repeats the command continuously.

number

Defines the number of processes to display; default is 5.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display a list of the most memory-intensive processes.

Examples
admin:show process using-most memory
75564 /usr/local/cm/bin/cmoninit
75600 /usr/local/cm/bin/cmoninit
76428 /usr/local/cm/bin/cmoninit
117412 /usr/local/cm/bin/cmoninit
148832 /home/tomcat/tomcat /home/tomcat/tomcatJlauncherConfig.xml 
-Djava.library.path=/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/loca
l/thirdparty/java/j2sdk/jre/lib/i386/server:/usr/lib/pgsql:/usr/lib:/usr/local/cm/lib::/us
r/local/platform/lib -Xmx512m -Xms256m -DLD_ASSUME_KERNEL=2.2.5 -Djava.end
show recordedquality

show recordedquality recid
Syntax Description

recid

Recording identification number.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the quality level for a recorded file that is identified by a recording identification number (recid). Recording identification numbers can be found in the Recordings Management section of the administrative user interface.

Examples
admin:show recordedquality 2009113021152077726258
Highest Detail, Best Motion: 1080p
show refreshrate

show refreshrate
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the default spacing between IDRs in the video streams.

Examples
admin:show refreshrate
IDRs are spaced 15 seconds apart
show registry

show registry system component [name] [page]
Syntax Description

system

The registry system name

component

The registry component name

name

The name of the registry parameter

page

Causes output to pause, displaying one page at a time.

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display registry contents.

Examples
admin:show registry cm dbl/sdi
system = cm
   component = dbl/sdi
      tracelevel=127
      enable=1
      outputdebugstringflag=0
      numminutes=1440
      tracefile=/var/log/active/cm/trace/dbl/sdi/dbl.log
      numfiles=250
      numlines=10000
show snmp trapdests

show snmp trapdests
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the configured Simple Network Management Protocol (SNMP) trap destinations.

Examples
admin:show snmp trapdests
1) Host = 64.101.180.49:162 (Version 3)
     Version 3 Options:
            User = TimTrap               PW   = authpriv
           Level = authnopriv            hash = md5
        EngineID = 0x80001f8803001a6406bc16
  2) Host = 64.101.180.49 (Version 3)
     Version 3 Options:
            User = TimTrap2              PW   = authpriv
           Level = authnopriv            hash = md5
        EngineID = 0x80001f8803001a6406bc16
show snmp users

show snmp users
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the configured Simple Network Management Protocol (SNMP) users and communities.

Examples
admin:show snmp users
1)  Username: admin                     Version: v3
       Level: AuthNoPriv                   Mode: RW
2)  Username: tim                       Version: v3
       Level: AuthNoPriv                   Mode: RW
3) Community: TimRO                     Version: v2c
       Level: n/a                          Mode: R
4) Community: TimRW                     Version: v2c
       Level: n/a                          Mode: RW
show statistics dialnumber

show statistics dialnumber dialnumber
Syntax Description

dialnumber

The dial number where statistics will be sent.

Command Modes

Admin

Command History

Release

Modifications

1.8

This command was first documented.

Usage Guidelines

Use this command to display statistics for a video session at the supplied dial number

Examples
admin:show statistics dialnumber 15555
show stats io

show stats [file name] [kilo | detail] [page]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

kilo

Shows details statistics in kilobytes.

detail

Shows detailed statistics of every available device on the system. This option overrides kilo option.

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display system I/O statistics of the device.

Examples
admin:show stats io kilo file statsiodump
show status

show status
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display basic platform status information.

Examples
admin:show status
Host Name    : tsbu-ctrs-dev6
Date         : Tue Dec 1, 2009 20:47:30
Time Zone    : Coordinated Universal Time (Etc/UTC)
Locale       : en_US.UTF-8
Product Ver  : 2.0.0.0-44
Platform Ver : 2.0.0.1-1
License MAC  : 00237D62B15A
Uptime:
 20:47:31 up 8 days,  1:04,  3 users,  load average: 0.33, 0.35, 0.28
CPU Idle:                          %  System:  00.00%    User:  00.00%
  IOWAIT:  00.00%     IRQ:  00.00%    Soft:  00.00%   Intr/sec: 1034.34
Memory Total:        4147676K
        Free:        2954080K
        Used:        1193596K
      Cached:         523412K
      Shared:              0K
     Buffers:         112808K
                        Total            Free            Used
Disk/active         34701384K       31991040K        2357800K (7%)
Disk/inactive       34701352K       32444668K        1904140K (6%)
Disk/logging       705460380K      650848468K       18776524K (3%)
     Buffers:          68972K
                        Total            Free            Used
Disk/active          4032124K        2117232K        1710064K (45%)
Disk/inactive        4032092K        1857492K        1969776K (52%)
Disk/logging        70438620K       63214064K        3646484K (6%)
show syslog facility

show syslog facility
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog default facility used for logging messages.

Examples
admin:show syslog facility
Using the local1 facility
show syslog heartbeat facility

show syslog heartbeat facility
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat facility used for heartbeat messages.

Examples
admin:show syslog heartbeat facility
Using the local1 facility
show syslog heartbeat interval

show syslog heartbeat interval
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat interval in minutes.

Note Zero (0) indicates that the syslog heartbeat interval is disabled.

Examples
admin:show syslog heartbeat interval
Using the 0 minute interval
show syslog heartbeat msg

show syslog heartbeat msg
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat message text.

Examples
admin:show syslog heartbeat msg
Using the "Syslog heartbeat message" message
show syslog heartbeat severity

show syslog heartbeat severity
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the severity used for syslog heartbeat messages.

Examples
admin:show syslog heartbeat severity
Using the 7 severity
show syslog timezone

show syslog timezone
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog timezone setting as either local time or GMT/UTC.

Examples
admin:show syslog timezone
Using gmt timezone
show syslog version

show syslog version
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the syslog output version as either CiscoLog v1.1 or IETF/RFC Syslog Protocol Version 1.

Examples
admin:show syslog version
Version is 0, the Ciscolog v1.1 format
show tech all

show tech all [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display output from all of the show tech commands simultaneously.

Note This command may produce a large output of data.

Examples
admin:show tech all file techdump
show tech network all

show tech network all [page] [file name] [search text]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all of the network-related information associated with the node.

Examples
admin:show tech network all 
-------------------- show platform network -------------------- 
 Ethernet Interfaces: 
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:23:7d:62:b1:5a brd ff:ff:ff:ff:ff:ff
    inet 172.28.70.109/22 brd 172.28.71.255 scope global eth0
    inet6 fe80::223:7dff:fe62:b15a/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:23:7d:62:b1:58 brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
  ...
show tech network hosts

show tech network hosts [page] [file name] [search text]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display host-related aspects of the device's network.

Examples
admin:show tech network hosts 
-------------------- show platform network -------------------- 
 /etc/hosts File: 
#This file was generated by the /etc/hosts cluster manager.
#It is automatically updated as nodes are added, changed, removed from the cluster.
127.0.0.1 localhost
::1 localhost
172.28.70.109 tsbu-ctrs-dev6.cisco.com tsbu-ctrs-dev6 
show tech network interfaces

show tech network interfaces [page] [file name] [search text]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display interface-related aspects of the device's network.

Examples
admin:show tech network interfaces
-------------------- show platform network -------------------- 
 Ethernet Interfaces: 
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:23:7d:62:b1:5a brd ff:ff:ff:ff:ff:ff
    inet 172.28.70.109/22 brd 172.28.71.255 scope global eth0
    inet6 fe80::223:7dff:fe62:b15a/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:23:7d:62:b1:58 brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
...
show tech network resolv

show tech network resolv [page] [file name] [search text]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display specific information from the resolv.conf file for this device.

Examples
admin:show tech network resolv 
-------------------- show platform network -------------------- 
 /etc/resolv.conf file
search cisco.com
nameserver 171.70.168.183 
show tech network routes

show tech network routes [page] [file name] [search text]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display specific route-related information for this device.

Examples
admin:show tech network routes 
-------------------- show platform network -------------------- 
 Routes: 
172.28.68.0/22 dev eth0  proto kernel  scope link  src 172.28.70.109 
169.254.0.0/16 dev eth0  scope link 
default via 172.28.68.1 dev eth0 
show tech network sockets

show tech network sockets [page] [file name] [search text] [numeric]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

search text

Searches output for a particular text string as indicated by text. Search is case insensitive.

numeric

Displays ports in numeric format

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the list of open sockets. With the numeric option, you can show the numerical addresses of the ports instead of determining symbolic hosts.

Examples
admin:show tech network sockets numeric
 -------------------- show platform network -------------------- 
 Network Connections:
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State      
tcp        0      0 localhost:9000              localhost:32789             ESTABLISHED 
tcp        0      0 localhost:32789             localhost:9000              ESTABLISHED 
tcp        0     48 tsbu-kht9.cisco.com:22      sjc-tifox-8712.cisco.c:3445 ESTABLISHED 
udp        0      0 localhost:32768             localhost:514               ESTABLISHED 
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  2      [ ]         DGRAM                    16220  
/usr/local/platform/conf/clm/unix_socket
unix  2      [ ]         DGRAM                    8434   @/var/run/hal/hotplug_socket
unix  2      [ ]         DGRAM                    3352   @udevd
unix  13     [ ]         DGRAM                    6581   /dev/log
unix  3      [ ]         DGRAM                    6600   /dev/log2
unix  2      [ ]         DGRAM                    2049109 
unix  3      [ ]         STREAM     CONNECTED     2043836 
unix  3      [ ]         STREAM     CONNECTED     2043835 
unix  2      [ ]         DGRAM                    252061 
unix  2      [ ]         DGRAM                    251977 
unix  2      [ ]         DGRAM                    251967 
unix  2      [ ]         DGRAM                    16316  
unix  2      [ ]         DGRAM                    16222  
...
show tech runtime all

show tech runtime all [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all of the show tech runtime information simultaneously, including environment variables, disk, memory and CPU.

Examples
admin:show tech runtime all
-------------------- show platform runtime -------------------- 
Environment variables:
TOMCAT_HOME=/usr/local/thirdparty/jakarta-tomcat
SERVER_LOCALE=en_us.utf8
HOSTNAME=tsbu-ctrs-dev6
SR_AGT_CONF_DIR=/usr/local/Snmpri/conf
SHELL=/usr/local/platform/bin/cliscript.sh
TERM=vt100
CATALINA_HOME=/usr/local/thirdparty/jakarta-tomcat
INFORMIXTMP=/usr/local/ctis/db/informix/tmp
...
The disk usage:
Filesystem            Size  Used Avail Use% Mounted on
/dev/cciss/c0d0p2      34G  2.3G   31G   7% /
/dev/cciss/c0d0p1      34G  1.9G   31G   6% /partB
/dev/cciss/c0d1p1     673G   18G  621G   3% /common
none                  2.0G     0  2.0G   0% /dev/shm
...
Total memory (RAM+swap) usage (in KB):
             total       used       free     shared    buffers     cached
Mem:       4147676    1198220    2949456          0     112828     524952
-/+ buffers/cache:     560440    3587236
Swap:      2048248          0    2048248
Total:     6195924    1198220    4997704
The processor usage :
top - 21:53:33 up 8 days,  2:10,  3 users,  load average: 0.30, 0.32, 0.27
Tasks: 138 total,   1 running, 137 sleeping,   0 stopped,   0 zombie
...
show tech runtime cpu

show tech runtime cpu [page] [file name ]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the CPU usage at the time the command is executed.

Examples
admin:show tech runtime cpu
-------------------- show platform runtime -------------------- 
The processor usage :
top - 21:59:15 up 8 days,  2:16,  3 users,  load average: 0.31, 0.31, 0.27
Tasks: 137 total,   1 running, 136 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.1% us,  0.0% sy,  0.0% ni, 99.9% id,  0.0% wa,  0.0% hi,  0.0% si
Mem:   4147676k total,  1197636k used,  2950040k free,   112828k buffers
Swap:  2048248k total,        0k used,  2048248k free,   524952k cached
  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
    1 root      16   0  2552  652  560 S  0.0  0.0   0:01.48 init               
    2 root      RT   0     0    0    0 S  0.0  0.0   0:00.09 migration/0        
    3 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/0        
    4 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/1        
    5 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/1        
    6 root      RT   0     0    0    0 S  0.0  0.0   0:00.02 migration/2        
    7 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/2        
    8 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/3        
    9 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/3        
   10 root      RT   0     0    0    0 S  0.0  0.0   0:00.02 migration/4        
   11 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/4        
   12 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/5        
   13 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/5        
   14 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/6        
   15 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/6        
   16 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/7        
   17 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/7 
show tech runtime disk

show tech runtime disk [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the system.

Examples
admin:show tech runtime disk
-------------------- show platform runtime -------------------- 
The disk usage:
Filesystem            Size  Used Avail Use% Mounted on
/dev/cciss/c0d0p2      34G  2.3G   31G   7% /
/dev/cciss/c0d0p1      34G  1.9G   31G   6% /partB
/dev/cciss/c0d1p1     673G   18G  621G   3% /common
none                  2.0G     0  2.0G   0% /dev/shm
/dev/cciss/c0d0p3     251M   11M  228M   5% /grub
/dev/cciss/c0d0p6      67G   85M   63G   1% /spare
/dev/cciss/c0d1p1     673G   18G  621G   3% /common/media
show tech runtime env

show tech runtime env [page] [file name ]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display runtime environment variables.

Examples
admin:show tech runtime env
Environment variables:
TOMCAT_HOME=/usr/local/thirdparty/jakarta-tomcat
SERVER_LOCALE=en_us.utf8
HOSTNAME=tsbu-ctrs-dev6
SR_AGT_CONF_DIR=/usr/local/Snmpri/conf
SHELL=/usr/local/platform/bin/cliscript.sh
TERM=vt100
CATALINA_HOME=/usr/local/thirdparty/jakarta-tomcat
INFORMIXTMP=/usr/local/ctis/db/informix/tmp
HISTSIZE=1000
SSH_CLIENT=::ffff:171.70.13.148 4385 22
INFORMIXDIR=/usr/local/ctis/db/informix
JBOSS_HOME=/usr/local/thirdparty/jboss
SSH_TTY=/dev/pts/0
CLIENT_LOCALE=en_us.utf8
TOMCAT_CLASSPATH=/usr/local/thirdparty/java/bcprov-jdk15-138.jar:/usr/local/platform/jar/x
alan.jar:/usr/local/platform/jar/certMgmt.jar:/usr/local/platform/jar/certMonitor.jar:/usr
/local/platform/jar/Iproduct.jar:/usr/local/platform/jar/Ihardware.jar:/usr/local/platform
/jar/CiscoIPSec.jar:/usr/local/platform/jar/ciscoCmd.jar:/usr/local/platform/jar/ciscoComm
on.jar:/usr/local/platform/jar/platform-api.jar:/common/download:/usr/local/platform/appli
cation_locale/platform-api:/usr/local/platform/application_locale/cmplatform:/usr/local/cm
/jar/commons-logging.jar
USER=admin
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05
;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32
:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=
01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=
01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
LD_LIBRARY_PATH=/usr/local/thirdparty/java/jdk1.5.0_17/jre/lib/i386/server:/usr/local/thir
dparty/java/jdk1.5.0_17/jre/lib/i386:/usr/local/thirdparty/java/jdk1.5.0_17/jre/../lib/i38
6:/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/local/thirdparty/java/
...
show tech runtime memory

show tech runtime memory [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display runtime memory information.

Examples
admin:show tech runtime memory
-------------------- show platform runtime -------------------- 
Total memory (RAM+swap) usage (in KB):
             total       used       free     shared    buffers     cached
Mem:       4147676    1199348    2948328          0     112844     525716
-/+ buffers/cache:     560788    3586888
Swap:      2048248          0    2048248
Total:     6195924    1199348    4996576
show tech system all

show tech system all [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display all of the information associated with show tech system commands simultaneously, including bus, hardware, host, kernel, software and tools.

Examples
admin:show tech system all
-------------------- show platform system -------------------- 
Host related info:
Machine Name: tsbu-ctrs-dev6.cisco.com
Tue Dec  1 22:10:31 UTC 2009 - up for 8 days  2:27
Locale LANG=en_US.UTF-8
Software Release Version: 2.0.0.0-44
Platform Release Version: 2.0.0.1-1
Hardware Model: 7845H2
Processors    : 2
Type          :  Family: Xeon
...
software: system versions
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
...
Tomcat "6.0.20-0"
Linux Kernel modules loaded: 
Module                  Size  Used by
ipt_REDIRECT            6209  2 
deflate                 7617  0 
...
show tech system bus

show tech system bus [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display bus-related system information.

Examples
admin: show tech system bus
-------------------- show platform system -------------------- 
Hardware: pci bus devices summary
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 (rev b1)
00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 
(rev 09)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface 
Controller (rev 09)
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09)
01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller 
(rev 03)
01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller
01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART
02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet 
(rev 12)
04:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet 
(rev 12)
06:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 04)
09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
Hardware: USB bus devices summary
Bus 006 Device 001: ID 0000:0000  
Bus 005 Device 003: ID 03f0:1327 Hewlett-Packard 
Bus 005 Device 002: ID 03f0:1027 Hewlett-Packard 
Hardware: bus devices detail 
...
show tech system hardware

show tech system hardware [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display hardware-related system information.

Examples
admin:show tech system hardware 
-------------------- show platform system -------------------- 
Hardware Model: 7845H2
Processors    : 2
Type          :  Family: Xeon
Speed         : 2333 MHz
Memory        : 4096 MB
show tech system host

show tech system host [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display host-related system information.

Examples
admin:show tech system host
-------------------- show platform system -------------------- 
Host related info:
Machine Name: tsbu-ctrs-dev6.cisco.com
Tue Dec  1 22:18:35 UTC 2009 - up for 8 days  2:35
Locale LANG=en_US.UTF-8
show tech system kernel modules

show tech system kernel modules [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the kernel modules installed.

Examples
admin:show tech system kernel modules
-------------------- show platform system -------------------- 
Linux Kernel modules loaded: 
Module                  Size  Used by
ipt_REDIRECT            6209  2 
deflate                 7617  0 
zlib_deflate           24793  1 deflate
twofish                41025  0 
serpent                17729  0 
aes                    32641  0 
blowfish               14273  0 
des                    15809  0 
sha256                 13377  0 
crypto_null             6337  0 
af_key                 34513  2 
mptctl                 37573  4 
mptbase                68257  1 mptctl
sg                     38369  0 
hpilo                  13836  6 
ipmi_si                39904  2 
ipmi_devintf           13448  4 
ipmi_msghandler        33644  2 ipmi_si,ipmi_devintf
i2c_dev                14529  0 
i2c_core               26305  1 i2c_dev
iptable_nat            27613  2 ipt_REDIRECT
ipt_LOG                10177  1 
ipt_limit               6465  2 
ipt_state               5953  2 
ip_conntrack           46085  2 iptable_nat,ipt_state
iptable_filter          6977  1 
ip_tables              23105  6 
ipt_REDIRECT,iptable_nat,ipt_LOG,ipt_limit,ipt_state,iptable_filter
...
show tech system software

show tech system software [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display system-related software information.

Examples
admin:show tech system software 
-------------------- show platform system -------------------- 
Software Release Version: 2.0.0.0-44
Platform Release Version: 2.0.0.1-1
show tech system tools

show tech system tools [page] [file name]
Syntax Description

file name

Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).

page

Pauses output.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display system-related tools information.

Examples
admin:show tech system tools
-------------------- show platform system -------------------- 
software: system versions
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Tomcat "6.0.20-0"
show timezone

show timezone {config | list}
Syntax Description

config

Displays the current timezone setting.

list

Lists all available timezones.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the current timezone settings or to display a list of all available timezones in long format.

Note The first value is the timezone index, which may be used to set a new timezone using the set timezone command. You can also use the time zone name.

Examples
admin:show timezone config
Current timezone: Coordinated Universal Time
admin:show timezone list
  0 - (GMT-12:00) Eniwetok, Kwajalein
  1 - (GMT-11:00) Midway Island, Samoa
  2 - (GMT-10:00) Hawaii
Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney
Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney
The numbers in first column 0, 1, 2 represent index that can be used in set timezone 
command
  0 - (GMT-12:00) Eniwetok, Kwajalein
  1 - (GMT-11:00) Midway Island, Samoa
  2 - (GMT-10:00) Hawaii
  3 - (GMT-09:00) Alaska
  4 - (GMT-08:00) Pacific Time (US & Canada)
  5 - (GMT-07:00) Arizona
  6 - (GMT-07:00) Mountain Time (US & Canada)
  7 - (GMT-06:00) Central Time (US & Canada)
  8 - (GMT-06:00) Central America
  9 - (GMT-06:00) Saskatchewan
 10 - (GMT-06:00) Mexico City
 ...
show users

show users
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the users registered on this device.

Examples
admin:show users 
Users:
Guest  - Anonymous
show version

show version {active | inactive}
Syntax Description

active

Displays the version number of the software on the active partition.

inactive

Displays the version number of the software on the inactive partition.

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display information about the version number of the software on the inactive or active partition.

Examples
admin:show version active 
Active Master Version: 1.1.1.0-30
Active Version Installed Software Options: 
No Installed Software Options Found.
admin:show version inactive
Inactive Master Version: 1.6.0.0-213
Inactive Version Installed Software Options: 
No Installed Software Options Found.
show videoquality

show videoquality
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the default video quality.

Examples
admin:show videoquality 
Video Quality: Highest Detail, Best Motion: 1080p
show workingdir

show workingdir
Syntax Description

None

Command Modes

Admin

Command History

Release

Modifications

1.6

This command was first documented.

Usage Guidelines

Use this command to display the current working directories for activelog, inactivelog, and the TFTP system directories.

Examples
admin:show workingdir 
activelog : <not set, using default path>
inactivelog : <not set, using default path>
tftp : <not set, using default path>