 Feedback
|
Table Of Contents
List of Supported Commands for Cisco ME 2600X Series Ethernet Access Switch
List of Supported Commands for Cisco ME 2600X Series Ethernet Access Switch
First Published: March 19, 2013Revised: September 5, 2013Document Release History
March 19, 2013
Initial release of the document.
September 3, 2013
IPv6 and SSH commands are introduced for this release.
The console may display additional commands, keywords or arguments that are not supported on Cisco ME 2600X. This guide lists only the commands supported on Cisco ME 2600X.
Each command is a hyperlink, and takes you to the command specific documentation available on Cisco.com.
Configuration Commands
aaa accounting {system | network | exec | connection | commands level} {default | list-name} {start-stop | stop-only | none} group group-name [method1 [method2...]]
aaa authentication banner delimiter string delimiter
aaa authentication enable default method1 [method2...]
aaa authentication fail-message delimiter string delimiter
aaa authentication login default [group {radius [group tacacs+] [local] | loginrad} | methodname | tacacs+ local]
aaa authentication password-prompt text-string
aaa authorization {network | exec | commands level | reverse-access | configuration | ipmobile} {default | list-name} [method1 [method2...]]
bandwidth {kbps | [remaining] percent percentage}
bandwidth remaining ratio ratio
boot system flash sdflash:filename
bridge-domain bridge-domain-id
bridge-domain bridge-id [split-horizon]
channel-group channel-number mode {active | passive}
class {class-name | class-default}
class-map [match-any]| [match-all] class-map-name
clear ip dhcp snooping database statistics
clear ip icmp rate-limit [interface-type interface-number]
clear mac-address-table [address mac-address] [interface type number] [bridge-domain bridgedomain-id]
config-register 0xvalue
copy [running-config startup-config | tftp: ramdisk:]
crypto key export rsa key-label pem {terminal | url url} {3des | des} passphrase
crypto key generate rsa [general-keys | usage-keys | signature | encryption] [label key-label] [exportable] [modulus modulus-size] [storage devicename:] [redundancy] [on devicename:]
crypto key import rsa key-label pem [ usage-keys | signature | encryption | general-purpose] {storage | terminal [passphrase] | url url } [exportable] [on devicename:]
delete {flash1: filename | sdflash: filename}
deny {{src-mac mask | any | host} {dest-mac mask | any | host} [protocol [cos value]]}
deny tcp host ip any
dir {all-filesystems | ramdisk | sdflash:}
duplex [auto | half | full]
enable password [level level-number] {password | encryption-type encrypted-password}
enable secret [level level-number] {password | encryption-type encrypted-password}
encapsulation dot1q {any | vlan-id [vlan-id [-vlan-id]]} second-dot1q {any | vlan-id [vlan-id [-vlan-id]]}
errdisable recovery cause mac-security
format sdflash
hostname name
interface {type {slot/port | number} | interface-id | port-channel number}
ip access-group access-list-name {in | out}
ip access-list {{standard | extended} {access-list-name | access-list-number} | helper egress check}
ip arp inspection bridge-domain {bridge-domain_ID | bridge-domain_range}
ip arp inspection bridge-domain range logging {acl-match | dhcp-bindings} {all | none | permit}
ip arp inspection limit {rate pps [burst interval seconds] | none}
ip arp inspection log-buffer {entries number | logs number_of_messages interval length_in_seconds}
ip arp inspection validate {[dst-mac] [ip] [src-mac]}
ip default-gateway ip-address
ip dhcp snooping binding mac address bridge-domain bridge-domain_id ip_address interface ifname efp_id efp-id expiry sec
ip dhcp snooping database {_url | write-delay seconds | timeout seconds}
ip dhcp snooping information option [allow-untrusted]
ip dhcp snooping limit rate rate
ip dhcp snooping verify mac-address
ip icmp rate-limit unreachable [df][ms] [log [packets] [interval-ms]]
ip igmp snooping immediate-leave
ip igmp snooping report-suppression
ip ssh version [1 | 2]
ip verify source bridge-domain dhcp-snooping
ipv6 access-list id [line num] {permit | deny} protocol source [src_port] destination [dst_port]
ipv6 address ipv6-prefix/prefix-length anycast
ipv6 address ipv6-address [eui-64]
ipv6 address ipv6-address link-local
ipv6 nd dad attempts value
ipv6 nd ns-interval value
ipv6 nd prefix ipv6-prefix/prefix-length
ipv6 nd ra-interval [msec] value
ipv6 nd ra-lifetime value
ipv6 nd reachable-time value
ipv6 neighbor ipv6_address if_name mac_address
ipv6 route interface_name destination next_hop_ipv6_addr [admin_distance]
lacp max-bundle number
lacp min-bundle min-bundle-number
lacp system-priority priority
line [aux | console | tty | vty] line-number [ending-line-number]
mac access-group access-list-name in
mac limit maximum addresses maximum-addresses
mac security [address {permit | deny} mac-address | maximum addresses maximum-addresses | sticky [address mac-address] | violation {protect | restrict}]
mac static address mac-address
match cos cos-number
match ip precedence ip-precedence-value
match qos-group qos-group-number
match vlan [vlanid]
mvr group ip-address count
mvr type {receiver bridge-domain id | source}
password password
permit {src-mac mask | any | host} {dest-mac mask | any | host}
permit tcp host
police [cir | rate] bps-value [bc | burst] bc [be | peak-burst] be conform-action action exceed-action action violate-action action
policy-map policy-map-name
port-channel load-balance {link link-id}
priority {bandwidth value | percent x%}
radius-server host {hostname | ip-address}
rep block port {id port-id | neighbor-offset | preferred} vlan {vlan-list | all}
rep lsl-age-timer [value]
rep lsl-retries [count]
rep preempt delay [value]
rep preempt segment [segment id]
rep segment segment-id [edge [no-neighbor] [primary]] [preferred]
rep stcn {interface interface-id | segment segment-id-list}
rewrite ingress tag {push {dot1q vlan-id | dot1q vlan-id second-dot1q vlan-id | dot1ad vlan-id dot1q vlan-id} | pop {1 | 2} | translate {1-to-1 {dot1q vlan-id | dot1ad vlan-id}| 2-to-1 dot1q vlan-id | dot1ad vlan-id}| 1-to-2 {dot1q vlan-id second-dot1q vlan-id | dot1ad vlan-id dot1q vlan-id} | 2-to-2 {dot1q vlan-id second-dot1q vlan-id | dot1ad vlan-id dot1q vlan-id}} {symmetric}
rmon alarm number variable interval {delta | absolute} rising-threshold value [event-number] falling-threshold value [event-number] [owner string]
rmon event number [log] [trap community] [description string] [owner string]
service instance id ethernet [service-name}
service-policy {input | output} policy-map-name
set cos cos-value
set ip dscp ip-dscp-value
set ip precedence ip precedence value
set qos group qos-group-value
shape average cir value
speed [auto | 1000 | 100 | 10]
ssh -l userid ip-address
storm-control {{broadcast | multicast} cir cir-value | action shutdown}
tacacs server key string
test flash burn rommon ramdisk:
username name [nopassword | password password | password encryption-type encrypted-password] | [access-class number] | [privilege level]
Show Commands
do show ip arp inspection [bridge-domain {bridge-domain_ID | bridge-domain_range} | begin bridge-domain]
do show ip arp inspection log | include Size
do show running-config | include ip arp inspection bridge-domain
show bridge-domain id mac security [address | last violation | statistics]
show ethernet service instance [[id id interface interface-id] mac security [address | last violation | statistics]] [load-balance | platform | stats]
show interfaces [stats]
show interfaces port-channel number [stats]
show ip arp inspection [bridge-domain [{bridge-domain_ID | bridge-domain_range} | begin bridge-domain] | interfaces | statistics [bridge-domain number]]
show ip arp inspection log | include Size
show ip dhcp snooping database [detail]
show ip icmp rate-limit [interface-type interface-number]
show ip igmp snooping [groups] [querier [vlan bridge-domain ID] [detail]] [mrouter]
show ip interface [brief]
show ipv6 interface [interface_name]
show lacp {channel-group-number | counters | internal [detail] | neighbor [detail] | sys-id}
show mac-address-table {address mac-addr | bridge-domain bridge-domain-id | interface type number}
show mac-address-table aging-time
show policy-map policy-map-name class class-name
show policy-map interface interface-type interface-number
show rep topology [detail]
show running-config [aaa | interface [port-channel channel-number]]
show tcp brief [all]
show tech-support [page] [password]