Table Of Contents
Fibre Channel Menu Tasks
Viewing and Configuring Global SRP Attributes
Configuring Global ITL Attributes
Viewing and Configuring SRP Initiators
Viewing SRP Initiators
Configuring Existing SRP Initiators
Viewing SRP Initiators with Storage Manager
Viewing General SRP Initiator Details with Storage Manager
Viewing Initiator-Target Connections with Storage Manager
Configuring the Mode of an Initiator-Target Pair
Viewing Initiator-LUN Connections with Storage Manager
Discovering LUNs with Storage Manager
Deleting an Initiator with Storage Manager
Configuring Existing SRP Initiators with Storage Manager
Viewing Initiator WWPNs
Editing Virtual WWPNs
Viewing Target Ports
Editing SRP Targets
Adding SRP Targets
Viewing SRP Targets with Storage Manager
Editing SRP Targets with Storage Manager
Viewing Initiator-Target-LUN Groups
Editing ITLs
Viewing Initiator-Target Pairs
Editing ITs
Viewing Logical Units
Editing LU Entries
Manually Adding SRP LUs
Viewing LUs with Storage Manager
Editing LU Attributes with Storage Manager
Editing Initiator Access to a LU
Viewing Global SRP Statistics
Viewing Global SRP Statistics with Storage Manager
Graphing Global SRP Statistics with Storage Manager
Swapping Chart Type, Layout, and Scale
Configuring Refresh Rate
Viewing ITL Statistics
Viewing ITL Statistics with Storage Manager
Graphing ITL Statistics with Storage Manager
Swapping Chart Type, Layout, and Scale
Viewing Gateway Statistics
Viewing Gateway Statistics with Storage Manager
Graphing Gateway Statistics with Storage Manager
Swapping Chart Type, Layout, and Scale
Viewing Recommended World Wide Names
Disconnecting ITLs on a Fibre Channel Gateway
Viewing All Fibre Channel Gateways on the Server Switch
Viewing Individual Fibre Channel Gateways
Redistributing Connections Over a Gateway
Viewing SRP Hosts
Defining a New SRP Host
Deleting SRP Hosts
Granting or Denying SRP Host Target Access
Editing SRP Hosts LUN Access
Fibre Channel Menu Tasks
This chapter describes the Fibre Channel menu tasks for Element Manager and contains these sections:
•
Viewing and Configuring Global SRP Attributes
•Viewing and Configuring SRP Initiators
•Viewing Initiator WWPNs
•Viewing Target Ports
•Viewing Initiator-Target-LUN Groups
•Viewing Initiator-Target Pairs
•Viewing Logical Units
•Viewing Global SRP Statistics
•Viewing ITL Statistics
•Viewing Gateway Statistics
•Viewing Recommended World Wide Names
•Disconnecting ITLs on a Fibre Channel Gateway
•Viewing All Fibre Channel Gateways on the Server Switch
•Viewing SRP Hosts
Note This chapter describes Fibre Channel storage tasks. For detailed information and configuration samples, see the Fibre Channel Gateway User Guide.
Some Fibre Channel menu options include edit icons. Table 10-1 describes those icons.
Table 10-1 SRP Navigation Icons
Icon
|
Description
|
|
The Copy icon copies the contents of cell(s). Select another editable cell or multiple editable cells, and paste the content.
|
|
The Paste icon places copied content into the cell or cells that you select. You can paste the content of one cell into multiple cells. You can paste the content of two side-by-side cells into multiple rows of side-by-side cells.
|
|
The Reset icon returns cells to the values held before you edited them.
Note You can only reset cells before you click Apply.
|
Viewing and Configuring Global SRP Attributes
To view global SRP attributes, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Global tab.
Table 10-2 describes the fields in the display.
Table 10-2 Global Attribute Field Descriptions
Field
|
Description
|
DefaultGatewayPortMaskPolicy
|
Boolean value that indicates if ports allow new SRP initiators to communicate through the Fibre Channel interface card(s).
|
DefaultLunPolicy
|
Boolean value that indicates if new SRP initiators have immediate access to target LUNs.
|
DefaultItlHiMark
|
Maximum number of requests that can be sent per logical unit. This value, an integer, falls between 1 and 256. This value defaults to 16.
|
DefaultItlMaxRetry
|
Number of times that an initiator may send the same I/O to a logical unit. Increase the value if you expect heavy traffic, or increase the default-itl-min-io-timeout value. The value, an integer, falls between 1 and 100. The value defaults to 5.
|
DefaultItlMinIoTimeout
|
Maximum amount of time for a logical unit to accept I/O traffic. Increase this value if you use a known slow connection, or increase the default-itl-max-retry value. The value, an integer, falls between 1 and 1800. The value defaults to 10 seconds.
|
DefaultItlDynamicPathAffinity
|
Boolean value that indicates if the system maintains a preference for a specific path. If the number of outstanding I/O requests becomes excessive, or the path fails, the ITL uses an alternative path.
|
DefaultItlDynamicGatewayPortLoadBalancing
|
Boolean value that indicates if data may be sent between the initiator and Fibre Channel target using both ports on the gateway interface. Port selection is based upon comparative I/O traffic. The controller attempts to distribute traffic equally between the ports. This feature runs by default.
|
DefaultItlDynamicGatewayPortFailover
|
Boolean value that indicates if the controller may select an alternate gateway interface port if the primary path fails. This feature does not run by default.
|
DefaultSeqItlHiMark
|
Default I/O high mark for a sequential device.
|
DefaultSeqItlMaxRetry
|
Default for the maximum number of retries for a sequential device.
|
DefaultSeqItlMinIoTimeout
|
Default for the maximum number of retries for a sequential device.
|
DefaultSeqItlDynamicPathAffinity
|
Default for the dynamic path affinity setting for a sequential device.
|
DefaultSeqItlDynamicGatewayPortLoadBalancing
|
Default of the dynamic path affinity setting for a sequential device.
|
DefaultSeqItlDynamicGatewayPortFailover
|
Boolean value that indicates if the controller may select an alternate storage port if the primary path fails. This feature does not run by default.
|
Configuring Global ITL Attributes
Note When you change global attributes, the new attributes do not apply to existing ITLs. Newly created ITLs have the new global attributes, but you must manually update existing ITLs to match the properties of the new ITLs.
To configure global ITL attributes, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Global tab.
Step 3 Choose one of these radio buttons in the DefaultGatewayPortMaskPolicy field to configure the gateway port mask policy:
•Choose the restricted radio button to deny new initiators access to Fibre Channel gateway ports.
•Choose the nonRestricted radio button to grant new initiators access to Fibre Channel gateway ports.
Step 4 Choose one of these radio buttons in the DefaultLunPolicy field to configure the LUN mask policy:
•Choose the restricted radio button to deny new initiators access to logical units.
•Choose the nonRestricted radio button to grant new initiators access to logical units.
Step 5 Configure global defaults for nonsequential (random) storage devices as follows:
a. Enter an integer value, between 1 and 256, in the DefaultItlHiMark field to specify the maximum number of requests that Fibre Channel gateways send to individual logical units.
b. Enter an integer value, between 1 and 100, in the DefaultItlMaxRetry field to specify the number of times that an initiator may send the same I/O to a logical unit.
c. Enter an integer value, between 1 and 1800, in the DefaultItlMinIoTimeout field to specify the amount of time (in seconds) for an ITL to accept I/O traffic.
d. (Optional) Check the DefaultItlDynamicPathAffinity check box.
e. (Optional) Check the DefaultItlDynamicGatewayPortLoadBalancing check box.
f. (Optional) Check the DefaultItlDynamicGatewayPortFailover check box.
Step 6 Configure global defaults for sequential (tape) storage devices as follows:
a. Enter an integer value, between 1 and 256, in the DefaultSeqItlHiMark field to specify the maximum number of requests that Fibre Channel gateways will send to individual logical units.
b. Enter an integer value, between 1 and 100, in the DefaultSeqItlMaxRetry field to specify the number of times an initiator may send the same I/O to a logical unit.
c. Enter an integer value, between 1 and 1800, in the DefaultSeqItlMinIoTimeout field to specify the amount of time (in seconds) for an ITL to accept I/O traffic.
d. (Optional) Check the DefaultSeqItlDynamicPathAffinity check box.
e. (Optional) Check the DefaultSeqItlDynamicGatewayPortLoadBalancing check box.
f. (Optional) Check the DefaultSeqItlDynamicGatewayPortFailover check box.
Step 7 Click Apply.
Viewing and Configuring SRP Initiators
View SRP initiators either in tabular format in the Element Manager SRP window, or in modular format in the Storage Manager.
Viewing SRP Initiators
To view SRP initiators in tabular format in the SRP window, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Initiators tab.
Table 10-3 describes the fields in the display
Table 10-3 Initiators Table Field Descriptions
Field
|
Description
|
Guid
|
Global Identifier of the initiator.
|
Extension
|
GUID extension of the initiator.
|
Description
|
ASCII text identifier of the initiator.
|
Wwnn
|
Fibre Channel gateway-assigned world-wide node name of the initiator.
|
Credit
|
Maximum number of outstanding SRP requests for each initiator connection.
|
State
|
When an initiator logs in to a target, the gateway port through which the connection goes through is marked '1'B. Otherwise, the port is marked '0'B.
|
PkeyCount
|
Number of partitions of which the initiator is a member (maximum of 16).
|
Pkeys
|
Partition keys of the partitions of which the initiator is a member.
|
BootupTargetWwpn
|
World-wide port name of the target that the initiator boots by default.
|
BootupFcLunId
|
Identifier of the LU that contains the boot image that the initiator boots.
|
Action
|
Last initiator action. This can be any of the following:
•none: initial state before the initiator takes any action
•discoveritl: discover and create ITL entities for this initiator without the initiator logging in
•autoBind: binds the initiator to its WWNN and WWPNs
|
Result
|
Result of the action in the Action column.
|
Configuring Existing SRP Initiators
To configure existing SRP initiators (hosts), follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Initiators tab.
Step 3 Identify the initiator entry that you want to reconfigure and locate that entry in the Initiators table.
Step 4 (Optional) Double-click the cell in the Description column, and then edit the description.
Step 5 (Optional) Double-click the cell in the Wwnn column, and then edit the WWNN.
Note We strongly recommend that you never manually edit an existing world-wide node name.
Step 6 (Optional) Double-click the cell in the Pkeys column, and then edit the partition keys.
Note We strongly recommend that you never manually edit an existing partition key entry.
Step 7 (Optional) Double-click the cell in the BootupTargetWwpn field and enter a new boot target.
Step 8 (Optional) Double-click the cell in the BootupFcLunId field and enter a new boot LUN.
Step 9 (Optional) Click the cell in the Action column and choose an action from the drop-down menu.
The action executes when you click Apply and the result appears in the Result column of the table.
Step 10 Click Apply.
Viewing SRP Initiators with Storage Manager
To view SRP initiators with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the SRP Hosts folder.
The SRP Hosts display appears in the right pane. Table 10-4 describes the fields in this display
Table 10-4 SRP Hosts Field Descriptions
Field
|
Description
|
Host
|
Hostname of the initiator.
|
WWNN
|
Fibre Channel gateway-assigned world-wide node name of the initiator.
|
Ports Registered With
|
Fibre Channel gateway ports through which the initiator connects to storage.
|
Viewing General SRP Initiator Details with Storage Manager
To view general SRP initiator details with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Click the initiator with details that you want to view.
The details appear in the right pane. Table 10-5 describes the fields.
Table 10-5 Initiator Details Field Descriptions
Field
|
Description
|
SRP Initiator ID
|
GUID and GUID extension of the initiator, separated by a forward-slash (/).
|
Ports Registered With
|
Fibre Channel gateway ports through which the initiator connects to storage.
|
WWNN
|
Fibre Channel gateway-assigned world-wide node name of the initiator.
|
Description
|
ASCII text identifier of the initiator.
|
Boot Target WWPN
|
World-wide port name of the target that the initiator boots by default.
|
Boot FC LUN
|
Identifier of the LU that contains the boot image that the initiator boots.
|
WWPNs
|
When you configure an initiator and autobind the initiator to a WWNN and to WWPNs, autobinding creates virtual WWPNs for each possible Fibre Channel gateway port that could potentially appear on the Server Switch.
•The Slot/Port column of the WWPNs table displays all of the potential Fibre Channel gateway ports on the chassis.
•The WWPN column of the WWPNs table displays the WWPN that autobinding created for each possible physical Fibre Channel gateway port. Storage devices use these WWPNs to communicate with the initiator.
•The Fibre Channel Address column of the WWPNs table displays the Fibre Channel address of the virtual port. When the physical Fibre Channel gateway port does not connect to storage, the address appears as 00:00:00.
|
Viewing Initiator-Target Connections with Storage Manager
To view initiator-target connections with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Click the initiator with connections to targets that you want to view, and then click the Targets tab.
The Targets Visible to This Host table appears in the right display. Table 10-6 describes the fields in this table.
Table 10-6 Targets Field Descriptions
Field
|
Description
|
Target WWPN
|
WWPNs of the target ports that the initiator sees.
|
Current Access
|
Fibre Channel gateway ports through which the initiator accesses the target storage port.
|
Physical Access
|
Fibre Channel gateway ports that physically connect the initiator to the target storage port.
|
Port Mask
|
Fibre Channel gateway ports (real and potential) that grant the initiator access to the target storage port.
|
Mode
|
Mode of the IT pair (normal or test).
|
Configuring the Mode of an Initiator-Target Pair
To configure he mode of an initiator-target pair, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Click the initiator with connections to targets that you want to view, and then click the Targets tab.
The Targets Visible to This Host table appears in the right pane.
Step 4 Click the entry of the IT pair that you want to configure, and then click Edit.
An IT Properties window opens.
Step 5 In the Mode field, choose either the Normal or Test radio button.
Note The Current Access field must not contain any entries in order for you to configure the mode.
Viewing Initiator-LUN Connections with Storage Manager
To view initiator-LUN connections with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Click the initiator with connections to the LUNs that you want to view, and then click the LUN Access tab.
Table 10-7 describes the fields that appear in the right pane.
Table 10-7 LUN Access Field Descriptions
Field
|
Description
|
Available LUNs
|
Displays LUNs that the initiator has discovered but cannot currently access. Expand the gateway icon ( ), and then expand the target icon ( ) to display the LUN icon ( ).
Note When the initiator cannot communicate with the target or LUN, the icon appears gray instead of blue.
|
Accessible LUNs
|
Displays LUNs that the initiator currently accesses. Expand the gateway icon ( ), and then expand the target icon ( ) to display the LUN icon ( ).
|
Discovering LUNs with Storage Manager
To discover the LUNs with STorage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Click the initiator with connections to the LUNs that you want to view, and then click the LUN Access tab.
Step 4 Click Discover LUNs.
Deleting an Initiator with Storage Manager
To delete an initiator entry with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the SRP Hosts folder.
Step 3 Select the initiator that you want to remove, and then click Remove.
Configuring Existing SRP Initiators with Storage Manager
To configure existing SRP initiators with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
A list of configured initiators appears beneath the SRP Hosts folder.
Step 3 Select the initiator that you want to configure, and then click the General tab.
Step 4 (Optional) Edit the ASCII text description in the Description field.
Step 5 (Optional) Choose a boot target from the Boot Target WWPN drop-down menu.
Step 6 (Optional) Choose a boot LUN from the Boot Fibre Channel LUN drop-down menu.
Step 7 Click Apply.
Viewing Initiator WWPNs
To view the initiator WWPNs that Fibre Channel gateway ports use to direct SAN traffic to SRP hosts, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Initiator WWPN tab.
Table 10-8 describes the fields that appear in the display.
Table 10-8 Initiator WWPN Field Descriptions
Field
|
Description
|
Guid
|
Global unique identifier of the initiator.
|
Extension
|
GUID extension of the initiator.
|
Port
|
Physical Fibre Channel gateway port (real or potential).
|
Wwpn
|
Virtual world-wide port name that the physical Fibre Channel gateway port uses to direct SAN traffic to the initiator.
|
FcAddress
|
Fibre Channel address of the virtual port that directs SAN traffic to the SRP host.
|
Editing Virtual WWPNs
To edit a virtual WWPN, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Initiator WWPN tab.
Step 3 Double-click the cell in the Wwpn column of the virtual WWPN that you want to edit and then change the value.
Note We strongly recommend that you never manually edit a virtual WWPN.
Step 4 Click Apply.
Viewing Target Ports
To view the target ports that your Fibre Channel gateway has discovered, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Targets tab.
Table 10-9 describes the fields that appear in the Targets table.
Table 10-9 Targets Table Field Descriptions
Field
|
Description
|
Wwpn
|
World-wide port name of the target storage port.
|
Description
|
ASCII text description of the target storage port. By default, the service name appears in this field.
|
IocGuid
|
Global unique identifier of the I/O controller (on the Server Switch) that manages the target.
|
ServiceName
|
Name of the Fibre Channel service.
|
ProtocolIds
|
Identifier of the Fibre Channel protocol.
|
FcAddress
|
Fibre Channel address of the target port.
|
Mtu
|
Maximum transmission unit of the target port.
|
PhysicalAccess
|
Physical Fibre Channel gateway ports that provide a path to the target port.
|
Wwnn
|
World-wide node name of the target storage device.
|
ConnectionType
|
All InfiniBand connections appear as Fibre Channel NL_Ports.
|
Editing SRP Targets
To edit SRP target targets, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Targets tab.
The Targets table appears.
Step 3 Identify the target that you want to edit and locate the appropriate entry in the table.
Step 4 (Optional) Double-click the cell in the Description column and edit the ASCII description.
Step 5 (Optional) Double-click the cell in the IocGuid column and edit the I/O controller GUID.
Note We strongly recommend that you do not manually edit the I/O controller GUID value.
Step 6 (Optional) Double-click the cell in the ServiceName column and edit the name of the service.
Step 7 Click Apply.
Adding SRP Targets
To manually add SRP targets, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Targets tab.
The Targets table appears.
Step 3 Click Insert.
The Insert SRP Targets window appears.
Step 4 Enter the WWPN of the target in the Wwpn field.
Step 5 Enter an ASCII text description of the target in the Description field.
Step 6 Enter the GUID of the I/O controller for the target in the IocGuid field.
Step 7 Enter a service name for the target in the ServiceName field.
Step 8 Click Insert.
Step 9 Click Apply.
Viewing SRP Targets with Storage Manager
To view SRP targets with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Targets folder.
The Targets Ports display appears. Table 10-10 describes the fields in the display.
Table 10-10 Targets Field Descriptions
Field
|
Description
|
Number of Active Targets
|
Number of active targets that connect to the Server Switch.
|
Number of Inactive Targets
|
Number of inactive targets that connect to the Server Switch.
|
Total Number of Targets
|
Number of targets that connect to the Server Switch.
|
WWPN
|
World-wide port name of the target port.
|
Description
|
ASCII text description of the target port.
|
Physical Access
|
Fibre Channel gateway ports that connect the Server Switch to the target port.
|
Editing SRP Targets with Storage Manager
To edit SRP target entries with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the Targets folder.
A list of discovered targets appears below the folder.
Step 3 Select the target in the Targets folder that you want to edit.
Target details appear in the right pane of the display.
Step 4 (Optional) Edit the ASCII description in the Description field.
Step 5 (Optional) Edit the service name in the Service Name field.
Step 6 Click Apply.
Viewing Initiator-Target-LUN Groups
To view ITLs, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITLs tab.
Table 10-11 describes the fields that appear in the ITLs table.
Table 10-11 ITLs Table Field Descriptions
Field
|
Description
|
Guid
|
Global unique identifier of the initiator in the ITL.
|
Extension
|
GUID extension of the initiator in the ITL.
|
TargetWwpn
|
World-wide port name of the target port in the ITL.
|
FcLunId
|
Fibre Channel LUN identifier of the LUN in the ITL.
|
DeviceCategory
|
Type of storage device (random or sequential).
|
Description
|
Description of the ITL, in ASCII characters.
|
SrpLunId
|
Virtual LUN ID of the LUN in the ITL, used for LUN masking.
|
LogicalId
|
Identifier of the logical unit (LU) that the LUN in the ITL represents.
|
GatewayPortMaskPolicy
|
Physical Fibre Channel gateway ports that connect the initiator to the target and LUN.
|
LunPolicy
|
Displays restricted if the initiator does not have access to the LUN in the ITL and nonRestricted if the initiator accesses the LUN.
|
State
|
Ports through which an IT connection occurs.
|
PhysicalAccess
|
Ports through which the ITL is physically accessible.
|
Editing ITLs
To edit ITLs, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITLs tab.
Step 3 Identify the ITL that you want to edit and locate the entry in the ITLs table.
Step 4 (Optional) Double-click the cell in the Description cell and edit the description.
Step 5 (Optional) Double-click the cell in the SrpLunID column and edit the LUN mask.
For details on LUN masking, see the Fibre Channel Gateway User Guide.
Step 6 (Optional) Double-click the cell in the LogicalId column and edit the LU identifier.
Note We strongly recommend that you never manually edit the LogicalId field.
Step 7 (Optional) Edit the gateway port-mask policy as follows:
a. Double-click the cell in the GatewayPortMaskPolicy column.
The GatewayPortMaskPolicy window opens.
b. Check the check boxes of the ports that you want to add; uncheck the check boxes of the ports that you want to remove
c. Click OK.
Step 8 (Optional) Click the cell in the LunPolicy column and choose restricted or nonRestricted from the drop-down menu.
Step 9 Click Apply.
Viewing Initiator-Target Pairs
To view IT pairs, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITs tab.
Table 10-12 describes the fields that appear in the ITs table.
Table 10-12 IT Table Field Descriptions
Field
|
Description
|
Guid
|
Global unique identifier of the initiator in the IT pair.
|
Extension
|
GUID extension of the initiator in the IT pair.
|
TargetWwpn
|
World-wide port name of the target port in the IT pair.
|
Description
|
ASCII text description of the IT pair.
|
GatewayPortMaskPolicy
|
Fibre Channel gateway ports that let the initiator access the target.
|
State
|
Fibre Channel gateway ports that the IT pair currently uses.
|
PhysicalAccess
|
Fibre Channel gateway ports that create a physical connection between the target and the initiator.
|
Mode
|
Mode of the IT pair (normal or test).
|
Action
|
Last action that the IT pair took.
|
Result
|
Result of the last action that the IT pair took.
|
Editing ITs
To edit ITs, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITs tab.
Step 3 Identify the IT that you want to edit and locate the entry in the ITs table.
Step 4 (Optional) Double-click the cell in the Description cell and edit the description.
Step 5 (Optional) Edit the gateway port-mask policy as follows:
a. Double-click the cell in the GatewayPortMaskPolicy column.
The GatewayPortMaskPolicy window opens.
b. Check the check boxes of ports to add; uncheck the check boxes of the ports to remove.
c. Click OK.
Step 6 (Optional) Click the cell in the Action column and choose an action from the menu.
The action executes when you click Apply, and the result of the action appears in the Result column.
Step 7 Click Apply.
Viewing Logical Units
To view the logical units that your Fibre Channel gateways have discovered, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITs tab.
Table 10-13 describes the fields in the table.
Table 10-13 Logical Units Field Descriptions
Field
|
Description
|
LogicalId
|
ID of the LU.
|
DeviceCategory
|
Displays random or sequential to identify the type of LUN.
|
Description
|
User-defined LU description.
|
HiMark
|
Maximum number of outstanding requests from the initiator to the storage that the ITL can maintain.
|
MaxRetry
|
Number of failed communication attempts that must occur before the LUN identifies the initiator as inaccessible.
|
MinIoTimeout
|
Maximum amount of time that elapses before a SRP request times out.
|
DynamicPathAffinity
|
Displays true if you enable the feature and false if you disable the feature.
|
DynamicGatewayPortLoadBalancing
|
Displays true if you enable the feature and false if you disable the feature.
|
DynamicGatewayPortFailover
|
Displays true if you enable the feature and false if you disable the feature.
|
VendorId
|
Vendor-assigned ID of the LUN.
|
ProductId
|
Vendor-assigned product ID of the LUN.
|
ProductRevision
|
Manufacturer-assigned product revision number.
|
PhysicalAccess
|
Fibre Channel gateway ports on your Server Switch that connect to the LU.
|
Targets
|
Target port that provides access to the LU.
|
Editing LU Entries
To edit LU entries, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the LUs tab.
Step 3 Identify the LU entry that you want to edit and locate the entry in the LUs table.
Step 4 (Optional) Click the cell in the DeviceCategory column and choose random or sequential from the drop-down menu.
Step 5 (Optional) Double-click the cell in the Description field and edit the ASCII text description of the LU.
Step 6 (Optional) Double-click the cell in the HiMark field and edit the hi-mark value of the LU.
Step 7 (Optional) Double-click the cell in the MaxRetry field and edit the maximum retry value of the LU.
Step 8 (Optional) Click the cell in the DynamicPathAffinity column and choose true or false from the drop-down menu.
Step 9 (Optional) Click the cell in the DynamicGatewayPortLoadBalancing column and choose true or false from the drop-down menu.
Step 10 (Optional) Click the cell in the DynamicGatewayPortFailover column and choose true or false from the drop-down menu.
Step 11 (Optional) Double-click the cell in the Targets column and edit the targets entry.
Note We strongly recommend that you do not edit the Targets field manually.
Step 12 Click Apply.
Manually Adding SRP LUs
To manually add SRP LUs, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the LUs tab.
The LUs table appears.
Step 3 Click Insert.
The Insert SRP LUs window appears.
Step 4 Enter the LU ID of the LU in the LogicalId field.
Step 5 In the DeviceCategory field, choose the sequential radio button for a tape device LU: otherwise, choose the random radio button.
Step 6 Enter a description in the Description field.
Step 7 Enter a high mark in the HiMark field.
Step 8 Enter a maximum retry value in the MaxRetry field.
Step 9 Enter a minimum timeout value in the MinIoTimeout field.
Step 10 Check one of the following check boxes:
•DynamicPathAffinity
•DynamicGatewayPortLoadBalancing
•DynamicGatewayPortFailover
Step 11 Enter target WWPNs in the Targets field.
Step 12 Click Insert.
Step 13 Click Apply.
Viewing LUs with Storage Manager
To view LUs with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Logical Units folder.
Table 10-14 describes the fields that appear.
Table 10-14 Logical Units Field Descriptions
Field
|
Description
|
Number of Active Logical Units
|
Number of active LUs that connect to the Server Switch.
|
Number of Inactive Logical Units
|
Number of inactive LUs that connect to the Server Switch.
|
Total Number of Logical Units
|
Number of LUs that connect to the Server Switch.
|
Logical Id
|
Logical ID of the LU.
|
Inquiry Data
|
Data received by the inquiry.
|
Physical Access
|
Fibre Channel gateway ports that connect the LUs to the Server Switch.
|
Editing LU Attributes with Storage Manager
To edit LU attributes with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the Logical Units folder to display the LUs in the folder.
Step 3 Click a LU icon (
) under the Logical Units folder.
Step 4 Click the General tab.
Step 5 (Optional) Edit the ASCII text description in the Description field.
Step 6 (Optional) Enter an integer value in the Hi Mark field.
Step 7 (Optional) Enter an integer value in the Max Retry field.
Step 8 (Optional) Enter an integer value in the Min IO Timeout field.
Step 9 (Optional) Choose the Path Affinity radio button.
Step 10 Click Apply.
Editing Initiator Access to a LU
To edit initiator access to a LU, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the Logical Units folder to display the LUs in the folder.
Step 3 Click an LU icon (
) under the Logical Units folder.
Step 4 Click the Initiator Access tab.
The Available Hosts and Accessible Hosts fields appear.
Step 5 Expand all plus-sign (+) icons to reveal all available and accessible hosts.
Step 6 Add or remove accessible hosts as follows:
•Select a host in the Accessible Hosts field, and then click Remove to deny that host access to the LUN.
•Select a host in the Available Hosts field, and then click Add to grant that host access to the LUN.
Step 7 Click Apply.
Viewing Global SRP Statistics
To view global statistics, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Global Stats tab.
Table 10-15 describes the fields that appear in the display.
Table 10-15 Global Stats Field Descriptions
Field
|
Description
|
LinkEvents
|
Number of link events (for example, link up, link down) processed by the Fibre Channel interface gateway(s).
|
SrpInitiatedIos
|
Number of I/O transactions requested by the SRP initiator.
|
SrpCmdsCompleted
|
Number of SRP commands completed on the Fibre Channel interface gateway(s).
|
SrpBytesRead
|
Number of I/O bytes read by the SRP initiator that connects to this chassis.
|
SrpBytesWritten
|
Number of I/O bytes written by the SRP initiator.
|
SrpConnections
|
Number of connections used by the SRP initiator.
|
SrpCmdsOutstanding
|
Number of unresolved SRP commands on the Fibre Channel interface gateway(s).
|
SrpErrors
|
Number of SRP errors encountered on the Fibre Channel interface gateway(s).
|
FcpInitiatedIos
|
Number of I/O responses by the Fibre Channel device to SRP initiator requests.
|
FcpCmdsCompleted
|
Number of FCP commands completed on the Fibre Channel interface gateway(s).
|
FcpBytesRead
|
Number of I/O bytes read by the target device.
|
FcpBytesWritten
|
Number of I/O bytes written by the target device.
|
FcpCmdsOutstanding
|
Number of unresolved FCP commands on the Fibre Channel interface gateway(s).
|
FcpErrors
|
Number of FCP errors encountered on the Fibre Channel interface gateway(s).
|
Viewing Global SRP Statistics with Storage Manager
To view global SRP statistics with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Click Graph Global Statistics.
The SRP Statistics window appears. Table 10-15 describes the fields in the rows of this window. Table 10-16 describes the fields in the columns of this window.
Note The elapsed time period appears in the bottom right of the SRP Statistics display.
Table 10-16 SRP Statistics Column Descriptions
Column
|
Description
|
AbsoluteValue
|
Cumulative value of the row since the Server Switch booted.
|
Cumulative
|
Cumulative value of the row over the elapsed time period.
|
Average
|
Average value of the row over the elapsed time period.
|
Minimum
|
Minimum value of the row over the elapsed time period.
|
Maximum
|
Maximum value of the row over the elapsed time period.
|
LastValue
|
Last change in the value of the row.
|
Step 4 (Optional) Click the drop-down menu at the bottom of the SRP Statistics window and choose a refresh interval.
The data begins to refresh at the rate that you specify.
Graphing Global SRP Statistics with Storage Manager
To graph global SRP statistics, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Click Graph Global Statistics.
The SRP Statistics window appears.
Step 4 Select the values that you want to include in the graph with one of the following methods:
•Click and drag your cursor across the values that you want to graph.
•Press the Ctrl key and select the values that you want to graph.
Step 5 Click the icon of the graph that you want to create (see Figure 10-1).
Figure 10-1 Graphing Icons
|
Line Chart
|
|
Area Chart
|
|
Bar Chart
|
|
Pie Chart
|
The graph appears.
Note With most charts, the display will reload with updated information based on the refresh rate. To configure the interval, see the "Configuring Refresh Rate" section.
Swapping Chart Type, Layout, and Scale
With the exception of pie charts, the chart display lets you do the following:
•Swap between charts.
•Increase or decrease the scale of the display.
•View the chart horizontally or vertically.
To complete these functions, use the icons s shown in Table 10-17.
Table 10-17 Chart Icons
Icon
|
Function
|
|
The Stacked icon overlays the graphical output of each statistic.
|
|
The Horizontal icon rotates the axis of the graph by 90 degrees.
|
|
The Log Scale icon zooms in and out.
|
|
The Line Chart icon displays a line chart.
|
|
The Area Chart icon displays an area chart.
|
|
The Bar Chart icon displays a bar chart.
|
Configuring Refresh Rate
Element Manager refreshes all statistics displays at regular intervals. To configure therefresh rate interval, follow these steps:
Step 1 In the chassis display, click a port with a refresh rate that you want to change.
Step 2 Click the Report menu and choose Graph Port.
A window opens that displays the type and number of the port.
Step 3 Click the drop-down menu that appears at the bottom of the window and choose the interval at which you want the display to refresh.
Note You do not need to click Apply or OK. The change takes place immediately.
Viewing ITL Statistics
To view ITL statistics, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the ITL Stats tab.
Table 10-18 describes the fields that appear in the display.
Table 10-18 ITL Stats Field Descriptions
Field
|
Description
|
Guid
|
GUID of the initiator.
|
Extension
|
GUID extension of the initiator.
|
TargetWwpn
|
WWPN of the target.
|
FcLunId
|
LUN ID of the LUN in the ITL.
|
SlotId
|
Slot on the Server Switch in which the Fibre Channel gateway resides.
|
SrpInitiatedIos
|
Number of SRP I/O requests.
|
SrpCmdsCompleted
|
Cumulative number of commands that one or all Fibre Channel gateways executed.
|
SrpBytesRead
|
Cumulative number of SRP bytes read by one or all Fibre Channel gateways.
|
SrpBytesWritten
|
Cumulative number of SRP bytes written by one or all Fibre Channel gateways.
|
SrpCmdsOutstanding
|
Cumulative number of outstanding Fibre Channel commands.
|
SrpErrors
|
Cumulative number of SRP errors.
|
FcpInitiatedIos
|
Number of Fibre Channel I/O requests.
|
FcpCmdsCompleted
|
Cumulative number of commands that one or all Fibre Channel gateways executed.
|
FcpBytesRead
|
Cumulative number of Fibre Channel bytes read by one or all Fibre Channel gateways.
|
FcpBytesWritten
|
Cumulative number of Fibre Channel bytes written by one or all Fibre Channel gateways.
|
FcpCmdsOutstanding
|
Cumulative number of outstanding Fibre Channel commands.
|
FcpErrors
|
Cumulative number of Fibre Channel errors on one or all gateways.
|
Viewing ITL Statistics with Storage Manager
To view ITL statistics with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Choose an initiator from the Initiator drop-down menu.
Step 4 Choose a target from the Target drop-down menu.
Step 5 Choose a logical unit from the LUN drop-down menu.
Step 6 Choose a Fibre Channel gateway from the Gateway drop-down menu.
Step 7 Click Graph ITL Statistics.
The ITL Statistics window opens. Table 10-18 describes the fields in this window. Table 10-19 describes the columns in this window.
Table 10-19 SRP Statistics Column Descriptions
Column
|
Description
|
AbsoluteValue
|
Cumulative value of the row since the Server Switch booted.
|
Cumulative
|
Cumulative value of the row over the elapsed time period.
|
Average
|
Average value of the row over the elapsed time period.
|
Minimum
|
Minimum value of the row over the elapsed time period.
|
Maximum
|
Maximum value of the row over the elapsed time period.
|
LastValue
|
Last change in the value of the row.
|
Graphing ITL Statistics with Storage Manager
To graph ITL statistics with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Choose an initiator from the Initiator drop-down menu.
Step 4 Choose a target from the Target drop-down menu.
Step 5 Choose a logical unit from the LUN drop-down menu.
Step 6 Choose a Fibre Channel gateway from the Gateway drop-down menu.
Step 7 Click Graph ITL Statistics.
The ITL Statistics window opens.
Step 8 Select the values that you want to include in the graph with one of the following methods:
•Click and drag your cursor across the values that you want to graph.
•Press the Ctrl key and select the values that you want to graph.
Step 9 Click the icon of the graph (see Figure 10-2) that you want to create.
Figure 10-2 Graphing Icons
|
Line Chart
|
|
Area Chart
|
|
Bar Chart
|
|
Pie Chart
|
The graph appears.
Note With most charts, the display will reload with updated information based on the refresh rate. To configure the interval, see the "Configuring Refresh Rate" section.
Swapping Chart Type, Layout, and Scale
With the exception of pie charts, the chart display lets you do the following:
•Swap between charts.
•Increase or decrease the scale of the display.
•View the chart horizontally or vertically.
To complete these functions, use the icons s shown in Table 10-20.
Table 10-20 Chart Icons
Icon
|
Function
|
|
The Stacked icon overlays the graphical output of each statistic.
|
|
The Horizontal icon rotates the axis of the graph by ninety degrees.
|
|
The Log Scale icon zooms in and out.
|
|
The Line Chart icon displays a line chart.
|
|
The Area Chart icon displays an area chart.
|
|
The Bar Chart icon displays a bar chart.
|
Viewing Gateway Statistics
To view Fibre Channel gateway statistics, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
Step 2 The SRP window opens.
Step 3 Click the Gateway Stats tab.
Table 10-21 describes the fields that appear in the display.
Table 10-21 Gateway Stats Field Descriptions
Field
|
Description
|
SlotId
|
Slot in the Server Switch in which the Fibre Channel gateway resides.
|
LinkEvents
|
Number of link events (for example, link up, link down) processed by the Fibre Channel interface gateway(s).
|
SrpCmdsOutstanding
|
Number of incomplete SRP commands on the Fibre Channel interface gateway(s).
|
SrpCmdsCompleted
|
Number of SRP commands completed on the Fibre Channel interface gateway(s).
|
SrpErrors
|
Number of SRP errors encountered on the Fibre Channel interface gateway(s).
|
SrpInitiatedIos
|
Number of I/O transactions requested by the SRP initiator.
|
FcpCmdsOutstanding
|
Number of incomplete FCP commands on the Fibre Channel interface gateway(s).
|
FcpCmdsCompleted
|
Number of FCP commands completed on the Fibre Channel interface gateway(s).
|
FcpErrors
|
Number of FCP errors encountered on the Fibre Channel interface gateway(s).
|
FcpInitiatedIos
|
Number of I/O responses by the Fibre Channel device to SRP initiator requests.
|
SrpBytesRead
|
Number of I/O bytes read by the SRP initiator that connects to this chassis.
|
SrpBytesWritten
|
Number of I/O bytes written by the SRP initiator.
|
FcpBytesRead
|
Number of I/O bytes read by the target device.
|
FcpBytesWritten
|
Number of I/O bytes written by the target device.
|
SrpConnections
|
Number of connections used by the SRP initiator.
|
Viewing Gateway Statistics with Storage Manager
To view gateway statistics with Storage Manager, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Select a gateway, in the Gateways field, with statistics that you want to view.
Step 4 Click Graph Gateway Statistics.
Step 5 The SRP Statistics window appears.
Table 10-21 describes the fields in the rows of this window. Table 10-22 describes the fields in the columns of this window.
Note The elapsed time period appears in the bottom right of the SRP Statistics display.
Table 10-22 SRP Statistics Column Descriptions
Column
|
Description
|
AbsoluteValue
|
Cumulative value of the row since the Server Switch booted.
|
Cumulative
|
Cumulative value of the row over the elapsed time period.
|
Average
|
Average value of the row over the elapsed time period.
|
Minimum
|
Minimum value of the row over the elapsed time period.
|
Maximum
|
Maximum value of the row over the elapsed time period.
|
LastValue
|
Last change in the value of the row.
|
Step 6 (Optional) Click the drop-down menu at the bottom of the SRP Statistics window and choose a refresh interval.
The data begins to refresh at the rate that you specify.
Graphing Gateway Statistics with Storage Manager
To graph gateway SRP statistics, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Statistics folder.
Statistics fields appear in the right pane of the display.
Step 3 Select the gateway, in the Gateways field, with statistics that you want to view.
Step 4 Click Graph Gateway Statistics.
The SRP Statistics window appears.
Step 5 Select the values that you want to include in the graph with one of the following methods:
•Click-and-drag your cursor across the values that you want to graph.
•Press the Ctrl key and select the values that you want to graph.
Step 6 Click the icon of the graph (see Figure 10-3) that you want to create.
Figure 10-3 Graphing Icons
|
Line Chart
|
|
Area Chart
|
|
Bar Chart
|
|
Pie Chart
|
The graph appears.
Note With most charts, the display will reload with updated information based on the refresh rate. To configure the interval, see the "Configuring Refresh Rate" section.
Swapping Chart Type, Layout, and Scale
With the exception of pie charts, the chart display lets you:
•Swap between charts.
•Increase or decrease the scale of the display.
•View the chart horizontally or vertically.
To complete these functions, use the icons shown in Table 10-23.
Table 10-23 Chart Icons
Iocn
|
Function
|
|
The Stacked icon overlays the graphical output of each statistic.
|
|
The Horizontal icon rotates the axis of the graph by ninety degrees.
|
|
The Log Scale icon zooms in and out.
|
|
The Line Chart icon displays a line chart.
|
|
The Area Chart icon displays an area chart.
|
|
The Bar Chart icon displays a bar chart.
|
Viewing Recommended World Wide Names
To view recommended world-wide node names and world-wide port names, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the WWN Allocator tab.
Step 3 Enter the GUID of the initiator for which you want to procure a WWNN or WWPN in the Guid field.
Step 4 Enter the GUID extension of the initiator for which you want to procure a WWNN or WWPN in the Extension field.
Step 5 Click the ... button in the Port field and select a port for which you want to procure a WWPN.
Step 6 Choose the getRecommendedWwnn radio button, and then click Apply to display the recommended WWNN in the RecommendedWwnn field.
Step 7 Choose the getRecommendedWwpn radio button, and then click Apply to display the recommended WWPN in the RecommendedWwpn field.
Disconnecting ITLs on a Fibre Channel Gateway
To disconnect all ITLs through a particular Fibre Channel gateway, follow these steps:
Step 1 Click the FibreChannel menu and choose SRP.
The SRP window opens.
Step 2 Click the Action tab.
Step 3 Choose the disconnectAllItls radio button.
Step 4 Enter the slot of the Fibre Channel gateway with ITLs that you want to disconnect in the SlotId field.
Step 5 Click Apply.
Viewing All Fibre Channel Gateways on the Server Switch
To view the all Fibre Channel gateways on your Server Switch, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the Gateway Cards folder.
The Gateway Cards display appears in the right pane of the window. Table 10-24 describes the fields in this display.
Table 10-24 Gateway Cards Field Descriptions
Field
|
Description
|
Gateway
|
Lists the gateways that reside in the Server Switch.
|
Initiator-Target Connections
|
Displays the number of IT connections that connect through the gateway.
|
ITLs
|
Displays the number of ITL connections that connect through the gateway.
|
Viewing Individual Fibre Channel Gateways
To view an individual Fibre Channel gateway, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
Step 2 The Storage Manager window opens.
Step 3 Expand the Gateway Cards folder.
Step 4 Select a gateway below the Gateway Cards folder.
The Active ITLs display appears.
Step 5 Expand an initiator in the Active ITLs display to list the targets available to the initiator.
Step 6 Expand a target in the Active ITLs display to list the LUs available to the initiator through that target.
Redistributing Connections Over a Gateway
To redistribute connections over a gateway, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
Step 2 The Storage Manager window opens.
Step 3 Expand the Gateway Cards folder.
Step 4 Select a gateway below the Gateway Cards folder.
Step 5 Click Redistribute Connections.
Viewing SRP Hosts
To view SRP hosts, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the SRP Hosts folder.
Table 10-25 describes the fields that appear in the display.
Table 10-25 SRP Hosts Field Descriptions
Field
|
Description
|
Number of Active Hosts
|
Number of active hosts that connect to the Server Switch.
|
Number of Inactive Hosts
|
Number of inactive hosts that connect to the Server Switch.
|
Total Number of Hosts
|
Number of hosts that connect to the Server Switch.
|
Host
|
ASCII text name of the host.
|
WWNN
|
World-wide node name of the host.
|
Ports Registered With
|
Fibre Channel gateway ports that connect the hosts to storage.
|
Defining a New SRP Host
To define a new SRP host, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
Step 2 The Storage Manager window opens.
Step 3 Select the SRP Hosts folder.
Step 4 Click Define New.
The Define New SRP Host window appears.
Step 5 Enter the GUID of your host in the Host GUID field, or choose it from the drop-down menu.
Note If your host successfully connects to your Server Switch, the GUID appears in the drop-down menu. To create a SRP host entry for a host not yet connected, manually enter the digits of the GUID in the field. Element manager automatically enters colons (:) as you enter digits.
Step 6 (Optional) Enter an ASCII text description of the host in the Description field.
Step 7 Click Next.
The WWNN and WWPNs of the entry appear.
Step 8 Click Finish.
Deleting SRP Hosts
To delete an SRP host, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Select the SRP Hosts folder.
Step 3 Select the SRP host that you want to delete, and then click Remove.
Granting or Denying SRP Host Target Access
To grant or deny the initiator access to SRP host targets, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
Step 3 Select the host with the target access that you want to edit.
Step 4 Click the Targets tab.
Step 5 Double-click the target entry to which you want to grant or deny the initiator access.
The IT Properties window opens.
Step 6 Click the ... button next to the Port Mask field.
The Select Port(s) window opens.
Step 7 Check the check boxes of the ports through which you want to grant the initiator access to the target; uncheck the check boxes through which you want to deny the initiator access to the target.
Step 8 Click Ok, and then click Apply.
Editing SRP Hosts LUN Access
To edit an SRP host's LUN access, follow these steps:
Step 1 Click the FibreChannel menu and choose Storage Manager.
The Storage Manager window opens.
Step 2 Expand the SRP Hosts folder.
Step 3 Select the host with target access that you want to edit.
Step 4 Click the LUN Access tab.
Step 5 Add or remove accessible LUNs as follows:
•Select a host in the Accessible LUNs field, and then click Remove to deny that host access to the LUN.
•Select a host in the Available LUNs field, and then click Add to grant that host access to the LUN.
Feedback
