Cisco ASA 5505 Hardware Installation Guide - About This Guide [Cisco ASA 5500-X Series Next-Generation Firewalls]

Table Of Contents

About This Guide

Document Objectives

Audience

Document Organization

Document Conventions

Installation Warnings

Where to Find Safety and Warning Information

Obtaining Documentation and Submitting a Service Request

About This Guide

This preface includes the following sections:

•Document Objectives

•Audience

•Document Organization

•Document Conventions

•Installation Warnings

•Obtaining Documentation and Submitting a Service Request

Document Objectives

This guide describes how to perform installation and maintenance procedures on the Cisco ASA 5505 Adaptive Security Appliance.

Audience

This guide is for network administrators who perform any of the following tasks:

•Managing network security

•Installing and configuring firewalls

•Managing default and static routes, and TCP and UDP services

Document Organization

This guide includes the following chapters and appendices:

•Chapter 1, "Overview," describes the product overview, LEDs and memory requirements.

•Chapter 2, "Preparing for Installation," describes the installation overview, safety recommendations, and general site requirements.

•Chapter 3, "Installing the Cisco ASA 5505," describes how to connect the interface cables, and rack or wall mount the chassis .

•Chapter 4, "Maintenance and Upgrade Procedures," describes the adaptive security appliance maintenance and upgrade procedures.

•Appendix 1, "Cable Pinouts," describes the cable pinouts.

Document Conventions

Command descriptions use these conventions:

•Braces ({ }) indicate a required choice.

•Square brackets ([ ]) indicate optional elements.

•Vertical bars (|) separate alternative, mutually exclusive elements.

•Boldface indicates commands and keywords that are entered literally as shown.

•Italics indicate arguments for which you supply values.

Examples use these conventions:

•Examples depict screen displays and the command line in screen font.

•Information you need to enter in examples is shown in boldface screen font.

•Variables for which you must supply a value are shown in italic screen font.

Graphical user interface examples uses these conventions:

•Boldface indicates buttons and menu items.

•Selecting a menu item (or pane) is indicated by the following convention:

Choose Start > Settings > Control Panel.

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.

Installation Warnings

Be sure to read the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document that accompanied this device before installing the chassis. This document contains important safety information. This section includes the following warnings:

•Power Supply Disconnection Warning

•Jewelry Removal Warning

•Wrist Strap Warning

•Work During Lightning Activity Warning

•Installation Instructions Warning

•Chassis Warning for Rack-Mounting and Servicing

•Short-Circuit Protection Warning

•SELV Circuit Warning

•Ground Conductor Warning

•Blank Faceplates and Cover Panels Warning

•Product Disposal Warning

•Short-Circuit Protection Warning

•Compliance with Local and National Electrical Codes Warning

•DC Power Connection Warning

•AC Power Disconnection Warning

•TN Power Warning

•48 VDC Power System

•Multiple Power Cord

•Circuit Breaker (15A) Warning

•Grounded Equipment Warning

•Safety Cover Requirement

•Faceplates and Cover Panel Requirement

Power Supply Disconnection Warning

Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the power at the circuit breaker on DC units. Statement 12

Jewelry Removal Warning

Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Wrist Strap Warning

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Work During Lightning Activity Warning

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Installation Instructions Warning

Warning Read the installation instructions before connecting the system to the power source. Statement 1004

Chassis Warning for Rack-Mounting and Servicing

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit should be mounted at the bottom of the rack if it is the only unit in the rack.When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

Short-Circuit Protection Warning

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

SELV Circuit Warning

Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Ground Conductor Warning

Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Blank Faceplates and Cover Panels Warning

Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029

Product Disposal Warning

Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

Short-Circuit Protection Warning

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

Compliance with Local and National Electrical Codes Warning

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

DC Power Connection Warning

Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8

AC Power Disconnection Warning

Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246

TN Power Warning

Warning The device is designed to work with TN power systems. Statement 19

48 VDC Power System

Warning The customer 48 volt power system must provide reinforced insulation between the primary AC power and the 48 VDC output. Statement 128

Multiple Power Cord

Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit, disconnect the power cord of the power strip that the unit is plugged into. Statement 137

Circuit Breaker (15A) Warning

Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13

Grounded Equipment Warning

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39

Safety Cover Requirement

Warning The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed. Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and electrical hazards. Statement 117

Faceplates and Cover Panel Requirement

Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 142

Where to Find Safety and Warning Information

For safety and warning information, see the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document that accompanied the product. This document describes the international agency compliance and safety information for the Cisco ASA 5505 Adaptive Security Appliance. It also includes translations of the safety warnings.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

	Cisco ASA 5505 Hardware Installation Guide
	About This Guide
Cisco ASA 5505 Hardware Installation Guide About This Guide Overview Preparing for Installation Installing the Cisco ASA 5505 Maintenance and Upgrade Procedures Pinouts Index	Download this chapter About This Guide Download the complete book asa_5505hw.pdf (PDF - 2 MB) Feedback Table Of Contents About This Guide Document Objectives Audience Document Organization Document Conventions Installation Warnings Where to Find Safety and Warning Information Obtaining Documentation and Submitting a Service Request About This Guide This preface includes the following sections: •Document Objectives •Audience •Document Organization •Document Conventions •Installation Warnings •Obtaining Documentation and Submitting a Service Request Document Objectives This guide describes how to perform installation and maintenance procedures on the Cisco ASA 5505 Adaptive Security Appliance. Audience This guide is for network administrators who perform any of the following tasks: •Managing network security •Installing and configuring firewalls •Managing default and static routes, and TCP and UDP services Document Organization This guide includes the following chapters and appendices: •Chapter 1, "Overview," describes the product overview, LEDs and memory requirements. •Chapter 2, "Preparing for Installation," describes the installation overview, safety recommendations, and general site requirements. •Chapter 3, "Installing the Cisco ASA 5505," describes how to connect the interface cables, and rack or wall mount the chassis . •Chapter 4, "Maintenance and Upgrade Procedures," describes the adaptive security appliance maintenance and upgrade procedures. •Appendix 1, "Cable Pinouts," describes the cable pinouts. Document Conventions Command descriptions use these conventions: •Braces ({ }) indicate a required choice. •Square brackets ([ ]) indicate optional elements. •Vertical bars (\|) separate alternative, mutually exclusive elements. •Boldface indicates commands and keywords that are entered literally as shown. •Italics indicate arguments for which you supply values. Examples use these conventions: •Examples depict screen displays and the command line in screen font. •Information you need to enter in examples is shown in boldface `screen` font. •Variables for which you must supply a value are shown in italic screen font. Graphical user interface examples uses these conventions: •Boldface indicates buttons and menu items. •Selecting a menu item (or pane) is indicated by the following convention: Choose Start > Settings > Control Panel. Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. Installation Warnings Be sure to read the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document that accompanied this device before installing the chassis. This document contains important safety information. This section includes the following warnings: •Power Supply Disconnection Warning •Jewelry Removal Warning •Wrist Strap Warning •Work During Lightning Activity Warning •Installation Instructions Warning •Chassis Warning for Rack-Mounting and Servicing •Short-Circuit Protection Warning •SELV Circuit Warning •Ground Conductor Warning •Blank Faceplates and Cover Panels Warning •Product Disposal Warning •Short-Circuit Protection Warning •Compliance with Local and National Electrical Codes Warning •DC Power Connection Warning •AC Power Disconnection Warning •TN Power Warning •48 VDC Power System •Multiple Power Cord •Circuit Breaker (15A) Warning •Grounded Equipment Warning •Safety Cover Requirement •Faceplates and Cover Panel Requirement Power Supply Disconnection Warning Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the power at the circuit breaker on DC units. Statement 12 Jewelry Removal Warning Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43 Wrist Strap Warning Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94 Work During Lightning Activity Warning Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Installation Instructions Warning Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Chassis Warning for Rack-Mounting and Servicing Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit should be mounted at the bottom of the rack if it is the only unit in the rack.When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006 Short-Circuit Protection Warning Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 SELV Circuit Warning Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021 Ground Conductor Warning Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024 Blank Faceplates and Cover Panels Warning Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029 Product Disposal Warning Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Short-Circuit Protection Warning Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Compliance with Local and National Electrical Codes Warning Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 DC Power Connection Warning Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8 AC Power Disconnection Warning Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246 TN Power Warning Warning The device is designed to work with TN power systems. Statement 19 48 VDC Power System Warning The customer 48 volt power system must provide reinforced insulation between the primary AC power and the 48 VDC output. Statement 128 Multiple Power Cord Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit, disconnect the power cord of the power strip that the unit is plugged into. Statement 137 Circuit Breaker (15A) Warning Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13 Grounded Equipment Warning Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39 Safety Cover Requirement Warning The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed. Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and electrical hazards. Statement 117 Faceplates and Cover Panel Requirement Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 142 Where to Find Safety and Warning Information For safety and warning information, see the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document that accompanied the product. This document describes the international agency compliance and safety information for the Cisco ASA 5505 Adaptive Security Appliance. It also includes translations of the safety warnings. Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks