Table Of Contents

Editing ITP MLR Address Table Files

Launching the Address Table Editor

Address Table Menu

Creating a New Address Table File

Loading an Existing Address Table File

Loading an Address Table File from a Node

Loading an Address Table File from the Archive

Working in Address Table Files

Result Types and Values

Editing Address Table Properties

Checking the Semantics of an Address Table File

Deploying an Address Table File

Displaying Basic Information About an Address Table File

Listing Archived Address Tables

Creating Network Name Mapping Files

Network Name Configuration Dialog Menu

Network Name Configuration Dialog Table

Saving an Address Table File

Reverting to the Last Saved Address Table File

Editing ITP MLR Address Table Files

---

You use the Cisco Mobile Wireless Transport Manager (MWTM) to configure Multi-Layer Routing (MLR) address table files by using the MWTM Address Table Editor. You can:

•Create new address table files.

•Load existing address table files.

•Edit address table files.

•Perform semantic checks on address table files.

•Deploy address table files to an ITP.

•Save address table files.

If you implement MWTM User-Based Access, the Address Table Editor is available to users with authentication level Network Operator (level 3) and higher.

For more detailed information about address tables, including configuration procedures and scenarios, see the IP Transfer Point (ITP) feature module for Cisco IOS software release 12.2(25)SW3 or later.

This chapter contains:

•Launching the Address Table Editor

•Creating a New Address Table File

•Loading an Existing Address Table File

•Loading an Address Table File from a Node

•Loading an Address Table File from the Archive

•Working in Address Table Files

•Editing Address Table Properties

•Checking the Semantics of an Address Table File

•Deploying an Address Table File

•Displaying Basic Information About an Address Table File

•Listing Archived Address Tables

•Creating Network Name Mapping Files

•Saving an Address Table File

•Reverting to the Last Saved Address Table File

Launching the Address Table Editor

The Address Table Editor runs as a separate application in the MWTM, so it requires a separate log in, just like the MWTM client.

If you implement MWTM User-Based Access, the Address Table Editor is available to users with authentication level Network Operator (level 3) and higher.

To launch the Address Table Editor, use one of these procedures:

•Choose Tools > Address Table Editor from the MWTM main menu.

•Enter the mwtm atblclient command (see mwtm atblclient, page B-100) from the command prompt.

The Startup Options dialog box appears, which you use to load a specific address-table file or create a new address table file.

The Startup Options dialog box contains options for loading or creating the address table data from:

Field or Button	Description
New File	Opens the Address Table Properties dialog box, which you use to create a new address table file (see Creating a New Address Table File). Create the new address table file. If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.
From File	Opens the Load File Dialog: Address Table File list, which you use to load a specific address table file and change the list of address table files (see Loading an Existing Address Table File). Select an address table file to load.
From ITP	Opens the Load Address Table from ITP wizard, which you use to select the ITP release 12.2(25)SW3 or later signaling point whose address table file you want to edit (see Loading an Address Table File from a Node). Select a signaling point. If you implement MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher.
From Archive	Opens the Load Address Table from Archive wizard, which you use to select the ITP release 12.2(25)SW3 or later node and signaling point whose address table file you want to edit (see Loading an Address Table File from the Archive). Select a signaling point and table type. If you implement MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher.

Once you close the Startup Options dialog box by creating a new address table file or loading an existing address table file, the Address Table Editor window appears. If you have created a new address table file, the table will be blank. If you have opened an existing address table file, the table will be populated.

Address Table Menu

The menu on the Address Table Editor window contains:

Menu Command	Description
File > New Table (Ctrl-N)	Opens the Address Table Properties dialog box. The MWTM prompts you to: •Enter the table name, variant, instance number, and network name, then click OK to create the address table file. •Click Cancel to close the prompt window without creating an address table file. For more information, see Creating a New Address Table File. If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.
File > Load > Load From File (Ctrl-L)	Opens the Load File dialog box, allowing you to load an already existing address table file. The MWTM prompts you to: •Select the file from the list, then click OK to load the address table file. •Click Cancel to close the prompt window without loading an address table file. For more information, see Loading an Existing Address Table File.
File > Load > Load From Node (Ctrl-T)	Opens the Load Address Table from ITP Wizard, which you use to select the ITP release 12.2(25)SW3 or later signaling point whose address table file you want to edit, as well as the table type. Tip Click Show Log at any time to view the process details. To load the address table from a node: 1. Select a node and signaling point from the drop-down list boxes, then click Next to load the address table list. 2. Select an address table list from the drop-down list box, then click Next to enter your passwords. 3. Enter the login password, then click Next. 4. Enter the enable password, then click Next. 5. Click Finish to complete the loading process. If you have implemented MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher. For more information, see Loading an Address Table File from a Node.
File > Load > Load From Archive (Ctrl-H)	Opens the Load Address Table from Archive Wizard, which you use to select the ITP release 12.2(25)SW3 or later node and signaling point whose address table file you want to edit. To load the address from archive: 1. Select a node and signaling point from the drop-down list boxes, then click Next to load the address table list. 2. Select the address table list from the drop-down list box, then click Next to enter your passwords. 3. Select the version from the table by clicking on it, then click Next. 4. Click Finish to complete the loading process. If you have implemented MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher. For more information, see Loading an Address Table File from the Archive.
File > Revert (Ctrl-R)	Reverts to the last saved version of the address table file.
File > Save (Ctrl-S)	Saves the changes that you make to the address table file.
File > Save As	Opens the Save File Dialog: Address Table File list, which you use to save the address table file with a new name or overwrite an existing address table file.
File > Semantic Check (Ctrl-K)	Opens the Semantic Check address table dialog box, which you use to check the semantics of an address table file against a specific ITP (see Checking the Semantics of an Address Table File).
File > Deploy (Ctrl-Y)	Opens the Deployment wizard, which you use to validate an address table file, upload it to an ITP, and activate it on the ITP. Note If you have not saved the current address table file, the Save File Dialog: Address Table File List appears, prompting you to save the file before continuing. For more information, see Deploying an Address Table File.
File > Exit (Ctrl-Q)	Closes the Address Table Editor window. The MWTM prompts you to confirm this action. Ensure that you save any changes before exiting, if necessary. Click: •Yes to exit. •No to close the window.
Edit > Address Table Properties (Ctrl-P)	Opens the Edit Address Table Properties dialog box, which you use to change the name, variant, version, instance ID, and network name associated with an address table file (see Editing Address Table Properties).
Edit > Add (Ctrl-E)	Adds a row to the address table.
Edit > Delete (Ctrl-Delete)	Deletes one or more chosen rows from an address table. The Confirm Delete dialog box appears. To: •Delete the chosen rows, click Yes. The rows disappear from the table and the Confirm Delete dialog box closes. •Retain the chosen rows, click No. The rows remain in the table and the Confirm Delete dialog box closes.
Edit > Node Archive Management	Opens the Node Archive Management dialog box, which you use to view the contents of the archive, open a version with its corresponding editor, and delete all versions of a file (see Node Archive Management, page 4-31). If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.
Edit > Node File Management	Opens the Node File Management dialog box, which you use to transfer address table files to and from the ITP (see Node File Management, page 4-24). If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.
View > Address Table Info (Ctrl-I)	Opens the Address Table Information dialog box, which shows basic information about the currently visible address table file.
View > Network Name Configuration (Ctrl-F)	Opens the Network Name Configuration dialog box, which maps network names to variants and network indicators, in support of cross-instance address table files.
Help > Topics (F1)	Shows the table of contents for the MWTM online help.
Help > Window (Shift-F1)	Shows online help for the current window.
Help > About (F3)	Shows build date, version, SSL support, and copyright information about the MWTM application.

Creating a New Address Table File

You use the MWTM to create a new address table file. If you:

•Launch the Address Table Editor from the Startup Options window, click New File.

•Are already in the Address Table Editor, choose File > New Table from the Address Table Editor menu. You are prompted to save changes if you are currently working on an unsaved file.

---

Note If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.

---

The Address Table Properties dialog box appears.

Field or Button	Description
Table Name	User-defined unique table name.
Variant	SS7 protocol variant. Select a variant from the drop-down list box. Valid variants are: •ANSI •China •ITU •TTC
Version	Version of the file format that the address table uses. Choose either: •1.1—Available beginning with 12.2(25)SW4a or 12.2(18)IXA •1.3—Available beginning with 12.2(25)SW9, 12.2(18)IXC, 12.4(11)SW, or 12.2(33)IRA •1.5—Available beginning with 12.2(18)IXG, 12.4(15)SW2, or 12.2(33)IRB. This version supports optional specification of instance number with a point code result.
Instance Number	Number of the instance that the address table uses. Select an instance number from the drop-down list box. Valid numbers are 0 to 7. The default instance number is 0.
Network Name	Network name that the address table uses. Select a network name from the drop-down list box. When you select the network name, the MWTM automatically sets the corresponding variant in the Variant field. If you change the network name for an existing address table file, the new network name must use the same variant.
OK	Creates the new address table file and closes the Address Table Properties dialog box. Enter or select values for the new address table file, then click OK. The MWTM creates the new address table file and closes the Address Table Properties dialog box.
Cancel	Closes the Address Table Properties dialog box without creating a new address table file. To close the Address Table Properties dialog box without creating a new address table file, click Cancel.
Help	Shows online help for the current window.

Related Topics

•Loading an Existing Address Table File

•Loading an Address Table File from a Node

Loading an Existing Address Table File

You use the MWTM to load a specific address table file and change the list of address table files. If you:

•Launch the Address Table Editor from the Startup Options window, click From File.

•Are already in the Address Table Editor, choose File > Load > Load From File from the Address Table Editor menu. You are prompted to save changes if you are currently working on an unsaved file.

---

Note When you load an address table file, the name of the server that is associated with the address table client and the filename, as well as the table type and mode (can be edit or view only), appear in the window name:

MWTM: Address Table Editor -- mwtm-sun8 -- address table.File.1 (MLR edit mode) 

If you have not yet loaded or saved an address table file, the message No File Loaded appears in place of the address-table filename.

---

The Load File Dialog: Address Table File List appears.

Field or Button	Description
File Types	Drop-down list only includes MLR.
Go up one Folder	Click this icon to go up one folder in the directory structure.
Type	Icon indicating whether the item in the table is a file or a folder.
Name	Name of the address table file or folder.
Last Modified	Date and time the address table file or folder was last modified.
Size (bytes)	Size of the address table file or folder, in bytes.
Number of Files (in lower-left corner)	Total number of address table files and folders.
OK	When you click this button, it: •Loads the chosen address table file. •Saves any changes you made to the list of files. •Closes the Load File Dialog: Address Table File list. •Opens the Progress dialog box •Begins loading the address table file. To load an address table file: •Double-click it in the list •Select it in the list and click OK. –Or, enter the name of the file and click OK. The MWTM closes the Load File Dialog: Address Table File list and the Progress dialog box appears, which shows the progress of the address table file load, as well as any messages that appear while loading the file. •When the file has been loaded, click OK. The MWTM closes the Progress dialog box, loads the address table file, and returns to the Address Table Editor window.
Delete	Deletes the chosen file from the address table file list. The MWTM issues an informational message containing the name and location of the deleted file.
Cancel	Closes the dialog box without loading an address table file or saving any changes to the address table file list.
Help	Shows online help for the dialog box.

Related Topics

•Launching the Address Table Editor

•Loading an Address Table File from a Node

Loading an Address Table File from a Node

---

Note Before using the Load Address Table From ITP wizard to load address table files, you must enable TFTP file transfer for the address table staging directory by using the mwtm atbldir command (see mwtm atbldir, page B-101).

---

You use the Load Address Table From ITP wizard to load an existing address table file from a node. If you:

•Launch the Address Table Editor from the Startup Options window, click From Node.

•Are already in the Address Table Editor, choose File > Load > Load From Node from the Address Table Editor menu.

If you implement MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher.

The Load Address Table From ITP wizard appears. The left pane of the Load Address Table From ITP wizard contains:

Step	Description
Select Node/SP	You can select the signaling point from which the address table should be loaded. You can optionally check the Filter by Node check box, which limits signaling point selection to a specific node. Select a signaling point and node (optional) from the drop-down list boxes, then click Next . The MWTM retrieves address table names from the chosen signaling point. If no address table names are available, the process ends with errors. If address table names are available, the MWTM proceeds directly to the Select Table step.
Select Table	The MWTM retrieves address table names from the chosen signaling point.
Login	You can log in to the ITP. Enter the: •Log in password, if required. •Enable password, if required. Note To avoid entering username and password information each time, you can set up credentials (see Configuring Login Credentials, page 5-19).
Load	Uploads the address table file to the MWTM. If the file upload ends with no errors, the process is successful. Click Finish.

The bottom line of the Load Address Table From ITP wizard contains:

Field or Button	Description
Progress Bar	Indicates that the address table file is being uploaded.
Show Log/Hide Log	Shows or hides the log file for the Load Address Table From ITP wizard.
Next >	Advances to the next step in the Load Address Table From ITP wizard.
Finish	Closes the Load Address Table From ITP wizard. The Finish button appears when loading ends successfully or the wizard detects errors and the process is cancelled.
Cancel	Closes the Load Address Table From ITP wizard without loading the file.
Help	Shows online help for the Load Address Table From ITP wizard.

Related Topics

•Launching the Address Table Editor

•Loading an Existing Address Table File

•Editing Address Table Properties

Loading an Address Table File from the Archive

---

Note Before using the Load Address Table From Archive wizard to load address table files, you must use the mwtm atbldir command to enable TFTP file transfer for the address table staging directory (see mwtm atbldir, page B-101).

---

You can use the Load Address Table From Archive wizard to load an existing address table file from the archive. If you:

•Launch the Address Table Editor, from the Startup Options window, click From Archive.

•Are already in the Address Table Editor, choose File > Load > Load From Archive from the Address Table Editor menu.

If you implement MWTM User-Based Access, this option is available to users with authentication level Network Operator (level 3) and higher.

The Load Address Table From Archive wizard appears. The left pane of the Load Address Table From Archive wizard contains:

Step	Description
Select Node/SP	You can select the signaling point from which to load the address table. You can optionally check the Filter by Node check box, which limits signaling point selection to a specific node. Select a signaling point and node (optional) from the drop-down list boxes, then click Next. The MWTM retrieves address table names from the chosen signaling point. If no address table names are available, the process completes with errors. If address table names are available, the MWTM proceeds directly to the Select Table step.
Select Table	The MWTM retrieves address table names from the chosen signaling point.
Select Version	You can select the version you want to load. Click a version to highlight it, then click Next. The table contains: •Rev—Revision number. •Date—Date and time the version was created. •Comments—Provided at the time of creation, if applicable. •Author—Initiator of the comments.
Load	Uploads the address table file to the MWTM. If the file upload ends with no errors, the process is successful. Click Finish.

The bottom line of the Load Address Table From Archive wizard contains:

Field or Button	Description
Progress Bar	Indicates that the address table file is being uploaded.
Next >	Advances to the next step in the Load Address Table From ITP wizard.
Finish	Closes the Load Address Table From ITP wizard. The Finish button appears when loading completes successfully or it detects errors and the process is cancelled.
Cancel	Closes the Load Address Table From ITP wizard without loading the file.
Help	Shows online help for the Load Address Table From ITP wizard.

Related Topics

•Launching the Address Table Editor

•Loading an Existing Address Table File

•Loading an Address Table File from a Node

Working in Address Table Files

After you create a new address table file or load an existing address table file, you can manage the address table entries.

If you implement MWTM User-Based Access, these options are available to users with authentication level Network Administrator (level 4) and higher. To:

•Add a row to a table, select the table and choose Edit > Add from the address table menu; or, Add from the right-click menu.

•Delete one or more rows from a table, select the rows and choose Edit > Delete from the address table menu; or, Delete from the right-click menu.

•Edit the values in each row in each table, type over the current value or select a new value from a drop-down list box. If you are editing a row, you cannot move on until all fields in the row are completed.

•Reset a cell to its previous value. Press Esc. Press Esc twice to reset the entire row.

•Commit your changes, click outside the row or press Enter.

---

Note Once you commit your changes, pressing Esc does not reset the cells in the row.

---

The Address Table Editor window contains:

Heading	Description
Address Digits	Address digits for the address table. Enter a 1- to 20-digit hexadecimal string. The value must be unique in an address table.
Exact Match	Considers the address an exact match.
Result Type	Type of action to perform on a match.
Result Value	Values to use with the matching action.

Result Types and Values

This table defines the list of result types from which to choose when you click in the Result Types column and the drop-down arrow that appears, also the corresponding result values that you enter for MLR address tables:

Result Type	Result Value	Description
asname	Route to the specified application server.	Message is routed to a particular destination M3UA or SUA application server.
block	(Optional, version 1.3 and higher) The Edit SCCP Error window appears. Enter a value: •0—No data for TT •1—No translation for address •2—Subsystem congestion •3—Subsystem is failed •4—Subsystem is unequipped •5—SS7 network failure •6—SS7 network congestion •7—Unqualified •8—XUDTS error in message transport •9—XUDTS error in local processing •A—XUDTS cannot perform reassembly •B—SCCP failure •C—SCCP hop counter violation •D—Segmentation not supported •E—Segmentation failure •WORD ITU SCCP Spare Error Codes in Hex {F..FF} Click Add to accept the value.	Indicates that you should discard the short message.
continue	None	Message that the normal SCCP routing will process the message.
group	Specify the name of the result group to which to route.	Indicates that a result group is used for routing.
gt	<SCCP address> tt <number> gti <number>	Indicates that the message is routed by using SCCP global title. Places the specified address in the SCCP Called Party Address. The routing indicator changes to RI=GT. Then routed based on the locally provisioned global-title translation table. When you select this parameter and click the corresponding space in the Result Value column, the Edit GTT dialog box appears and contains: •SCCP Address—An address string of 1-15 hexadecimal characters. The string is not input in BCD-String format, but in normal form. •Translation Type—Identifies the translation type that the address specifies. Valid values are 0-255. •Global Title Indicator—Identifies the global title indicator value for the specified address. This value is always 2 for an ANSI variant and might be 2 or 4 for other variant types. •Numbering Plan—Identifies the numbering plan of the specified address. This value is only specified when the gti parameter value is 4. Valid values are 0-15. •Nature of Address Indicator—Identifies the nature of the specified address. This value is only specified when the gti parameter value is 4. Valid values are 0-127. •Add—Adds the current values. •Close—Closes the dialog box. •Help—Launches the online help window for the current dialog box.
none	none	A result is not specified.
pc	<point code> ssn <number>	Indicates that pc or pc/ssn routing is used. When you select this parameter and click the corresponding space in the Result Value column, the Edit Point Code dialog box appears and displays these fields and buttons: •Point Code—Point code to route the message. •Instance—(version 1.5 and higher) Number of instances in which the point code is defined. Valid instance values are 0-7. •SSN —Specify a subsystem number. Valid values are 2-255. •Add—Adds the current values. •Close—Closes the dialog box. •Help—Launches the online help window for the current dialog box.

Editing Address Table Properties

You can use the MWTM to edit the address table properties associated with an address table file. Choose Edit > Address Table Properties from the Address Table Editor menu. The Edit Address Table Properties dialog box appears.

Field or Button	Description
Table Name	User-defined unique table name.
Variant	SS7 protocol variant. You cannot edit this field.
Version	Version of the file format that the address table uses. You cannot edit this field.
Instance Number	Number of the instance that the address table uses. Valid numbers are 0 to 7; the default instance number is 0.
Network Name	Network name that the address table uses. If you change the network name for an existing address table file, the new network name must use the same variant.
OK	Saves the changes to the address table file. Enter or select values, then click OK. The MWTM saves your changes to the address table file.
Cancel	Closes the Edit Address Table Properties dialog box without saving any changes to the address table file. To close the Edit Address Table Properties dialog box at any time without saving any changes to the address table file, click Cancel.
Help	Shows online help for the current window.

Checking the Semantics of an Address Table File

In using the MWTM, Cisco strongly recommends that you check the semantics of an address table file against a specific ITP, validating these data in the address table file:

Group Name—In the Address Table entries, when the result type is group the result value is a group name. You must configure the group name in the address entry on the ITP prior to the deployment of the address table. During the validation process, if the group name in the address entry does not have a corresponding match on the ITP, the MWTM generates an error.

To check the semantics of an address table file, choose File > Semantic Check from the Address Table Editor menu. The Semantic Check Address Table dialog box appears.

Field or Button	Description
Filter by Node	You can check the Filter by Node check box, which limits signaling point selection to a specific node.
Signaling Point	Name of the associated signaling point.
OK	Closes the Semantic Check Address Table dialog box and opens the Progress dialog box, which shows the progress of the semantic check for the address table file. Enter the name or IP address of an ITP, and click OK. The the Semantic Check Address Table dialog box closes and the Progress dialog box opens, which shows the progress of the semantic check for the address table file and any messages that appear while checking the file. When the check ends, click OK. The Progress dialog box closes and returns to the Semantic Check Address Table dialog box.
Cancel	Closes the Semantic Check Address Table dialog Box without checking the semantics of the address table file.

---

Note You can also use the mwtm checkmlr command to check the semantics of an MLR address table file (see mwtm checkmlr, page B-103).

---

Deploying an Address Table File

You use the Deployment wizard to validate an address table file, upload it to an ITP, archive the file, and activate it on the ITP. To launch the Deployment wizard for an address table file, use one of these procedures:

•Choose File > Deploy from the Address Table Editor menu (see Deploying ITP Files, page 4-33).

•Enter the mwtm pushmlr command (see mwtm pushmlr, page B-121).

Displaying Basic Information About an Address Table File

You use the MWTM to view basic information about the current address table file. Choose View > Address Table Info from the address table menu. The Address Table Information dialog box appears.

The Address Table Information dialog box is read-only.

Field or Button	Description
Table Name	User-defined unique table name.
Filename	Name of the address table file.
Version	Version of the file format that the address table uses.
Variant	SS7 protocol variant. Valid variants are: •ANSI •China •ITU •NTT •TTC
Network Name	Network name that the address table file uses.
Instance Number	Number of the instance that the address table uses. Valid numbers are 0 to 7. The default instance number is 0.
Last Modified	Date and time that someone last modified the address table file.
Total Entries	Total number of entries in the address table file.
OK	Closes the address table Table Info dialog box.

Listing Archived Address Tables

To view a list of deployed and archived MLR address tables, do one of the following:

•Enter the mwtm listarchive command (see mwtm listarchive, page B-115).

•In the MWTM Address Table Editor, choose Edit > Node Archive Management (see Node Archive Management, page 4-31).

For a list of current MLR address table files in the address table staging directory, enter the mwtm listmlr command (see mwtm listmlr, page B-116).

Creating Network Name Mapping Files

When the MWTM discovers your network, it automatically creates and populates the network name-mapping file; therefore, in most cases, you do not need to manually create the network name-mapping file. For more information about running Discovery, see Discovering Your Network, page 3-4.

In some cases, you might want to manually create the network name-mapping file; for example, you might not have run Discovery yet, but you want to prepare for a future address table configuration. Also, while you cannot change or delete entries that have been populated automatically by the MWTM, you can add entries manually; and, you can change or delete those manual entries.

To create the network name-mapping file manually; or, add, change, or delete manual entries, choose View > Network Name Configuration from the address table menu. If you implement MWTM User-Based Access, this option is available to users with authentication level System Administrator (level 5). The Network Name Configuration dialog box appears.

The Network Name Configuration dialog box contains:

•Network Name Configuration Dialog Menu

•Network Name Configuration Dialog Table

Network Name Configuration Dialog Menu

The menu on the Network Name Configuration dialog box contains:

Menu Command	Description
File > Revert (Ctrl-R)	Loads the most recent network name-mapping file from the MWTM server. If the MWTM discovers new entries for the network name-mapping file while you are editing an address table file (for example, if a new network instance is added, or a new network is discovered), the Address Table Editor does not detect the new entries and they do not appear in the Network Name Configuration dialog box. To see the new entries in the dialog box, choose File > Revert. (You can also restart the Address Table Editor to automatically load the most recent network name-mapping file from the MWTM server.)
File > Save (Ctrl-S)	Saves the changes that you make to the network name-mapping file. After you add, change, or delete entries and save the file, the MWTM uses the file the next time it discovers the network. However, if the MWTM discovers entries that conflict with manual entries in the file, the MWTM uses (and shows in the Network Name Configuration dialog box) the discovered entries; not the manual entries.
File > Print (Ctrl-P)	Prints the contents of the network name-mapping file.
File > Close (Ctrl-W)	Closes the network name-mapping file without saving any additions, changes, or deletions.
Edit > Add (Alt-A)	Adds an entry to the network name-mapping file.
Edit > Delete (Delete)	Deletes the chosen entry from the network name-mapping file.
Help > Topics (F1)	Shows the table of contents for the MWTM online help.
Help > Window (Shift-F1)	Shows online help for the current window.
Help > About (F3)	Shows build date, version, SSL support, and copyright information about the MWTM application.

Network Name Configuration Dialog Table

The Network Name Configuration Dialog table contains:

Field	Description
Network Name	Network name that the address table file uses. If you change the network name for an existing address table file, the new network name must use the same variant.
Variant	SS7 protocol variant. Valid variants are: •ANSI •China •ITU •NTT •TTC
Network Indicator	Type of call that a user places. Valid values are: •National—National-bound call. The MWTM routes national calls through the national network. •NationalSpare—National-bound call, used in countries in which more than one carrier can share a point code. In those countries, the Network Indicator differentiates networks. •International—International-bound call. The MWTM forwards international-bound calls to an STP pair that acts as an international gateway. •InternationalSpare—International-bound call, used in countries in which more than one carrier can share a point code. In those countries, networks are differentiated by the Network Indicator.
Discovered	Indicates whether the: •MWTM (Yes) discovered the entry. •A user entered it manually (No).

Saving an Address Table File

You use the MWTM to save a specific address table file and change the list of address table files.

If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.

To save the changes that you make to an address table file or change the list of address table files, use one of these procedures. To save the changes that you make to the address table file:

•Without changing the name of the file, choose File > Save from the address table menu.

•With a new name, choose File > Save As from the address table menu. The Save File Dialog: Address Table File List appears.

Field or Button or Icon	Description
Go up one Folder	Click this icon to go up one folder in the directory structure.
Create New Folder	Click this icon to create a new folder in the current directory. This action opens the Input dialog box. Enter a folder name and click OK. The new folder appears in the Save File dialog box. Double-click the folder to open it. You can save files in this folder or create another folder at this level.
Type	Icon indicating whether the item in the table is a file or a folder.
Name	Name of the address table file or folder.
Last Modified	Date and time a user last modified the address table file or folder.
Size (bytes)	Size of the address table file or folder, in bytes.
Filename	Name by which you want to save the address table file. If you create a new address table filename, you can use any letters, numbers, or characters in the name that your operating system allows. However, if you include spaces in the new name, the MWTM converts those spaces to hyphens (-); for example, the MWTM saves file a b c as a-b-c.
Number of Files (visible in bottom left corner)	Total number of address table files and folders.
OK	Saves the address table file or any changes you made to the list of files and closes the dialog box. To save the address table file with a new name, use one of these procedures. To save the file with: •A completely new name, enter the new name and click OK. •An existing name, overwriting an old address table file, select the name in the list and click OK. The MWTM closes the Save File Dialog: Address Table File List and the Progress dialog box appears, which shows the progress of the address table file save, as well as any messages that appear while saving the file. When the file is saved, click OK. The MWTM: •Closes the Progress dialog box. •Saves the address table file with the new name •Returns to the Address Table Editor window. Note If another user modifies and saves the address table file before you save your changes, the MWTM asks if you want to overwrite that user's changes. If you do, the other user's changes are overwritten and lost. If you choose not to, your changes are lost; unless you save the address table file to a different filename.
Delete	Deletes the chosen file from the address table file list. The MWTM issues an informational message containing the name and location of the deleted file.
Cancel	Closes the dialog box without saving the address table file or any changes to the address table file list.
Help	Shows online help for the dialog box.

When you are ready to exit the Address Table Editor window, choose File > Exit from the address table menu.

If you made any changes to the address table file, the MWTM asks if you want to save the changes before leaving the window. Click:

•Yes to save the changes.

The MWTM opens the Save File Dialog: Address Table File List, which you use to save the address table file with a new name, or overwrite an existing address table file.

•No to close the prompt window.

The MWTM closes the Address Table Editor window without saving any changes to the address table file.

By default, address table files reside in the MWTM installation directory. If you installed the MWTM in:

•The default directory, /opt, then the default directory is /opt/CSCOsgm/atbl.

•A different directory, then the default directory resides in that directory.

To change the directory in which the MWTM stores address table files, use the mwtm atbldir command (see mwtm atbldir, page B-101).

Reverting to the Last Saved Address Table File

To revert to the last saved version of the address table file, choose File > Revert from the address table menu. The MWTM shows the last saved version of the file.

If you implement MWTM User-Based Access, this option is available to users with authentication level Network Administrator (level 4) and higher.