Feedback
Contents
N through Z
- packet (fabricpath-oam)
- param-list
- password secure-mode
- path (fabricpath-oam)
- payload (fabricpath-oam)
- ping fabricpath
- port (fabricpath-oam)
- protocol (fabricpath-oam)
- redistribute hmm route-map
- reply mode out-of-band
- restart fabric_mcast
- route-reflector-group affinity
- server protocol
- server protocol radius
- service tag (fabricpath-oam)
- set
- show clock
- show config-profile
- show evb
- show fabric access connections
- show fabric access group
- show fabric access statistics
- show fabric connectivity cable-plan
- show fabric connectivity neighbors
- show fabric database statistics
- show fabric forwarding
- show fabric multicast
- show fabric multicast globals
- show fabric multicast vrf
- show fabricpath isis
- show fabricpath isis interface
- show fabricpath oam loopback
- show fabricpath oam mtrace
- show fabricpath oam notification
- show fabric oam traceroute
- show interface ethernet
- show interface status err-disabled
- show ip arp internal event-history
- show ip arp internal event-history buffer-size
- show ip arp statistics
- show logging level evb
- show logging logfile
- show param-list
- show running-config evb
- show running-config fabric multicast
- show running-config param-list
- show startup-config evb
- show startup-config param-list
- show tech-support fabric multicast
- system fabric core-vlans
- system fabric dynamic-vlans
- topology (fabricpath-oam)
- traceroute fabricpath
- use-vrf
- user-jid
- vdc switch
- verify profile
- vlan (fabricpath-oam)
- vlan access-map
- vlan filter
- vn-segment
- vni
packet (fabricpath-oam)
To specify packet flow and payload information in hexadecimal string format, use the packet command in FabricPath OAM profile flow configuration mode. To remove the packet information, use the no form of this command.
Syntax Description
hex-string Packet flow and payload information in hexadecimal string format. The maximum limit is 256 characters.
Note Enter the packet information starting with the Ethernet header in hexadecimal string format. For example: 00156dc4274b5404a63ced2b810000010800450000283e8a400080069bd2c0a80260e Command History
Usage Guidelines
You can specify a string value up to the maximum length of 256 characters. The string value is converted to a hex-string value. All characters beyond the maximum limit are treated as 0.
Examples
The following example shows how specify the value for packet flow and payload.
Device# configure terminal Device(config)# fabricpath oam profile 100 Device(config-fb-oam-profile)# flow forward Device(config-fb-oam-profile-flow)# packet 00156dc4274b5404a63ced2b810000010800450000283e8a400080069bd2c
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
Configures the direction FabricPath OAM flow entropy.
param-list
To create a user-defined parameter list or to configure parameters and parameter list instances for an existing parameter list, use the param-list command in global configuration mode. To delete a user-defined parameter list, use the no form of this command.
Syntax Description
parameter-list-name Name of the parameter list.
Note The parameter-list-name argument can be used to create a new parameter list or configure parameters and parameter list instances for an existing parameter list. To view existing parameter lists, type param-list ? in global configuration mode. Command History
Usage Guidelines
When you create a parameter list using the param-list command, the device enters parameter list configuration mode (config-param-list). In parameter list configuration mode, you can:
- Create parameters for the specified parameter list using the define option.
- Create an instance of a parameter list using the instance option.
Note
To view the define and instance options, type ? in parameter list configuration mode.To configure parameters and parameter list instances for an existing parameter list, use the param-list parameter-list-name command, where parameter-list-name corresponds to an existing parameter list.
Examples
The following example shows how to create a user-defined parameter list named List1 and create a parameter named param1 within the list:
Device# configure terminal Device(config)# param-list List1 Device(config-param-list)# define param1 integer 100 Device(config-param-list)# exitThe following examples shows how to view existing parameter lists:
Device# configure terminal Device(config)# param-list ? WORD Enter the name of the parameter list (Max Size 80) List2 (no abbrev) List3 (no abbrev)In the above example, List2 and List3 are the existing parameter lists. The following example shows how to add a parameter named param2 to List2:
Device(config)# param-list List2 Device(config-param-list)# define param2 integer 100 Device(config-param-list)# exit
Related Commands
Command
Description
password secure-mode
path (fabricpath-oam)
To configure the control plane forward or reverse path verification request, use the path command in FabricPath OAM profile configuration mode. To remove the path verification request, use the no form of this command.
Syntax Description
forward Configures the control plane forward path.
reverse Configures the control plane reverse path.
ecmp ecmp-value Configures the Equal-Cost Multipath (ECMP) value in hexadecimal values. The range is 0 to 255.
switch-id switch-id-value Configures the switch ID. The range is from 1 to 65535.
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
payload (fabricpath-oam)
To configure a FabricPath Operation, Administration, and Maintenance (OAM) payload pattern, use the payload command in FabricPath OAM profile configuration mode. To remove the FabricPath OAM payload pattern, use the no form of this command.
Syntax Description
pad pad-value Configures a FabricPath OAM payload pad value. The range is from 0x0 to 0xffff.
test Configures FabricPath OAM payload test information.
pattern-type pattern-id Configures a FabricPath OAM payload test pattern ID. The range is from 0 to 255.
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
ping fabricpath
To test the FabricPath Operation, Administration, Maintenance reachability, use the ping fabricpath command in privileged EXEC mode.
ping fabricpath [ switch-id switch-id [ profile profile-id ] [ interface interface-id ] [ ingress if-id ] { vlan vlan-id | tag tag-id | dot1q dot1q-id intf-id } [use-host-vlan] [ reply mode out-of-band { ipv4 ipv4-addr | ipv6 ipv6-addr } ] [ forward flow flow-entropy [ l2 | l3 ] ] [ hop hop-count ] [ topology topology-id ] [ size size | sweep min-size max-size ] [ payload { test pattern-type test-id | pad pad-val } ] [ repeat repeat-count ] [validate] [verbose] [ timeout timeout-val ] [ interval interval-val ] [ asynchronous [ database database-id ] [ threshold threshold-val ] ] ]
Syntax Description
switch-id switch-id (Optional) Sends a loopback request to the specified switch ID.
profile profile-id (Optional) Specifies FabricPath OAM profile.
interface interface-id (Optional) Name of the egress interface for FabricPath OAM ping. The allowed interfaces are Ethernet and Port Channel. The interface range is allowed for asynchronous ping so that multiple sessions per interface are created.
ingress if-id (Optional) Name of the ingress interface. (Required for SVI when used for enhanced forwarding. The ingress SVI and IP address from flow entropy is used to determine which segment packet exits out of the device.)
vlan vlan-id VLAN ID. The range is from 1 to 4094.
tag tag-id FabricPath OAM tag. The range is from 4096 to 0x00FFFFFF.
dot1q dot1q-id intf-id Specifies the FabricPath OAM 802.1Q interface ID.
Note Dot1q option is not available on Cisco Nexus 5000 series and 6000 series switches and it's only applicable to N7k. use-host-vlan (Optional) Specifies that only VLAN input should be used. Use this keyword when enhanced forwarding is applied and you do not want to use translated VLAN. Use this option when you specify the ingress interface ID or when you specify the flow entropy through the profile keyword or through forward flow with IP address of customer traffic.
reply mode out-of-band (Optional) Specifies that the FabricPath OAM reply mode is out of band. By default, FabricPath OAM is replied in band (on the FabricPath network). Use the reply mode out-of-band keyword to change the mode of reply to out of band for input IPv4 or IPv6 addresses. For routing, only default VRF is used.
ipv4 ipv4-addr (Optional) Specifies the input IPv4 address for out-of-band reply.
ipv6 ipv6-addr (Optional) Specifies the input IPv6 address for out-of-band reply.
forward flow flow-entropy (Optional) Specifies input flow entropy (128 bytes) from actual user data traffic so that FabricPath OAM packet takes the same path as user traffic.
l2 (Optional) Specifies that the input flow entropy must be terminated until only Layer 2 entries are used. For example, MAC address, VLAN, and e-type. We recommend that you use only one string option.
l3
Note Only IPv4 and IPv6 entries can be processed. hop hop-count (Optional) Specifies the FabricPath OAM ping hop count. Range is from 1 to 64. Default is 63.
topology topology-id (Optional) Specifies the topology ID. Range is from 0 to 63. Default is 0.
size size (Optional) Specifies the data padding size of data Type Length Value (TLV) or test TLV. The total size must not be greater than the MTU of the egress interface.
sweep min-size max-size (Optional) Specifies the FabricPath OAM minimum or maximum data or test TLV size in a sweep scenario.
payload (Optional) Specifies the FabricPath OAM payload pattern.
test pattern-type test-id (Optional) Specifies the FabricPath OAM test pattern ID.
pad pad-value (Optional) Specifies the padding of the packet with the specified data pattern. The range is from 0 to 0-0xFFFF.
repeat repeat-count (Optional) Specifies the repeat value.
validate (Optional) Validates the ping command.
verbose (Optional) Displays additional information.
timeout timeout-value (Optional) Specifies the timeout values in seconds. Range is from 1 to 36000.
interval interval-val (Optional) Specifies the minimum send delay between requests, in milliseconds. The range is from 100 to 3600000. Default is 0 for synchronous ping, 1000 for asynchronous ping.
asynchronous database-id (Optional) Specifies the database ID for storing asynchronous FabricPath OAM ping output.
threshold threshold-value (Optional) Specifies the threshold for number of timeouts that can occur before the information is captured in syslogs or SNMP traps. The range is from 1 to 10.
Command History
Usage Guidelines
For an synchronous ping, traceroute, or mtrace, if the profile has multiple interfaces only the first interface, is selected. Use the interface keyword to overwrite the selected interface. Only one session is created.
For Asynchronous ping, multiple sessions are automatically created for each interface option unless the you overwrite the inferface option using the interface keyword.
Examples
The following examples show how to ping a switch ID.
Device# ping fabricpath switch-id 10 sender handle: 1 Sending 5, 300-byte Loopback Request to switch-id 10, Timeout is 5 seconds, send interval is 0 msec: Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' – Destination Unreachable, 'X' - unknown return code, 'V' – VLAN nonexistent, 'v' – VLAN in suspended state, 'M' - malformed request, 'm' - unsupported tlvs, 'C' – Cross Connect Error, 'U' – Unknown RBridge nickname, 'n' – Not AF, 'E' –MTU mismatch, 'I' – Interface not in forwarding state, 'S' – Service Tag nonexistent, 's' – Service Tag in suspended state 't' – trace route in progress to get hop count’ Type escape sequence to abort. !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms Total Time Elapsed 5 msThe following examples show how to ping a switch ID with the keyword verbose.
Device# ping fabricpath switch-id 10 verbose Sending 5, 300-byte Loopback Request to switch-id 10, Timeout is 5 seconds, send interval is 0 msec: Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' – Destination Unreachable, 'X' - unknown return code, 'V' – VLAN nonexistent, 'v' – VLAN in suspended state, 'm' - malformed request, 'C' – Cross Connect Error, 'U' – Unknown RBridge nickname, 'n' – Not AF, 'M' –MTU mismatch, 'I' – Interface not in forwarding state, 'S' – Service Tag nonexistent, 's' – Service Tag in suspended state, 't' – trace route in progress to get hop count Type escape sequence to abort. ! size 300, reply switch-id 10 ! size 300, reply switch-id 10 ! size 300, reply switch-id 10 ! size 300, reply switch-id 10 ! size 300, reply switch-id 10 Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms Total Time Elapsed 5 msThe following example shows how to ping FabricPath switch ID when data TLV is included.
Device# ping fabricpath switch-id 3570 vlan 10 size 100 payload pad 0xAABB repeat 1 verbose Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 6 ! size 274, reply switch-id 3570 Success rate is 100 percent (1/1), round-trip min/avg/max = 5/5/5 ms Total time elapsed 6 msThe following example shows how to ping FabricPath switch ID with enhanced forwarding.
Device# ping fabricpath switch-id 3570 ingress vlan 20 vlan 10 repeat 1 Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 7 ! Success rate is 100 percent (1/1), round-trip min/avg/max = 3/3/3 ms Total time elapsed 5 msThe following example shows interactive ping with control plane forward and control plane reverse verification request.
Device# ping fabricpath Switch-id(1-65535) [1] 3570 Repeat count(1-429967295) [5] Timeout in seconds [2] Interval in ms [1000] Extended command(y/n) [n] y OAM Profile(1-1023) [none] Interface [none] Ingress Interface [none] Forward Flow entropy [n] Reverse Flow entropy [n] Reply mode out of band [n] Verbose [n] Hop count(1-63) [63] Topology id [0] Use host vlan [n] Vlan(vlan id or none) [1] 10 Control path forward request [n] y Control path forward ecmp [1] Control path forward switch-id(1-65535) [1] 3570 Control path reverse request [n] y Control path reverse ecmp [1] Control path reverse switch-id(1-65535) [1] 2021 Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 8 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 3/7/19 ms Total time elapsed 4071 msThe following example shows how to ping FabricPath switch ID when flow entropy is specified.
Device# ping fabricpath switch-id 3570 forward flow 0011222211110022222233338100000A8904 repeat 1 Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 10 ! Success rate is 100 percent (1/1), round-trip min/avg/max = 14/14/14 ms Total time elapsed 15 ms
Related Commands
Command
Description
Related Information
Traces the path from a source to a destination branch for FabricPath OAM.
Discovers the FabricPath route.
port (fabricpath-oam)
To configure a destination or source flow port address, use the port command in FabricPath OAM profile flow configuration mode. To remove the configured address for source or destination port, use the no form of this command.
Syntax Description
destination Specifies the destination flow port address.
source Specifies the source flow port address.
port-number The source or destination port address. The range is from 0 to 65535.
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
Configures the direction FabricPath OAM flow entropy.
protocol (fabricpath-oam)
To configure the FabricPath Operation, Administration, and Maintenance (OAM) flow protocol number, use the protocol command in FabricPath OAM profile flow configuration mode. To remove the flow protocol number, use the no form of this command.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
Configures the direction FabricPath OAM flow entropy.
redistribute hmm route-map
To enable redistribution of IPv4 and IPv6 Host Mobility Manager (HMM) routes through specified route maps, use the redistribute hmm route-map command in address-family configuration mode. To disable redistribution of HMM routes through specified route maps, use the no form of this command.
Syntax Description
map-name Route-map name.
Note Redistribution does not work if an access list is used as a match option in route-maps. Command History
Examples
The following example shows how to enable redistribution of HMM IPv4 routes filtered through route-map1:
Device# configure terminal Device(config)# router bgp 100 Device(config-router)# address-family ipv4 unicast Device(config-router-af)# redistribute hmm route-map route-map1 Device(config-router-af)# exitreply mode out-of-band
To configure the fabricpath OAM out-of-band service reply mode, use the reply mode out-of-band command in fabricpath OAM profile configuration mode. To remove the out-of-band service reply mode, use the no form of this command.
Syntax Description
ipv4 Specifies the IPv4 address.
ipv6 Specifies the IPv6 address.
ip-address IPv4 or IPv6 address.
port-number Port number. The range is from 0 to 65535.
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
restart fabric_mcast
To restart the fabric multicast process in a controlled way, use the restart fabric_mcast in privileged EXEC mode.
Command History
route-reflector-group affinity
To specify the route reflector group affinity to peer with, use the route-reflector-group affinity command in router configuration mode.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Enables configuring host mobility-specific commands.
server protocol
To configure Lightweight Directory Access Protocol (LDAP) or Extensible Messaging and Presence Protocol (XMPP) for a server group, use the server protocol command in fabric database configuration mode. To remove the configuration use the no form of this command.
server protocol { ldap | xmpp } { ip ip-address | host hostname } [ port port-number ] [ vrf vrf-name ]
no server protocol { ldap | xmpp } { ip ip-address | host hostname } [ port port-number ] [ vrf vrf-name ]
Syntax Description
ldap Specifies that LDAP is configured.
xmpp Specifies that XMPP is configured.
ip ip-address Specifies the IP address of the server.
host hostname Specifies the hostname of the server.
port port-number (Optional) Specifies the TCP or UDP port number on the server.
vrf vrf-name (Optional) Specifies the VRF context to use to connect to the server.
Command History
Usage Guidelines
Use this command along with the fabric database type command to configure an external database using XML or XMPP.
Examples
The following example shows how to configure a profile database using LDAP:
Device(config)# fabric database type profile Device(config-fabric-db)# server protocol ldap ip 10.0.0.1 Device(config-fabric-db-server)# db-table db-profile-dbThe following example shows how to configure an asset database using XMPP and segment ID as key.
Device(config)# fabric database type asset Device(config-fabric-db)# server protocol xmpp host server.cisco.com Device(config-fabric-db-server)# db-jid db@cisco.com key-type 1 Device(config-fabric-db-server)# user-jid leaf1@cisco.com password pwd
Related Commands
Command
Description
Related Information
Configures the Jabber ID of the database using XMPP.
Configures the external database.
Configures the Jabber ID and password of the switch that is used to connect to the server.
server protocol radius
To configure a RADIUS server protocol for a an authentication, authorization, and accounting (AAA) server group, use the server protocol radius command in fabric database configuration mode. To remove the configuration, use the no form of this command.
Syntax Description
group group-name Specifies a RADIUS protocol using an authentication, authorization, and accounting (AAA) server group.
Command History
Related Commands
Command
Description
Related Information
Configures the external database.
service tag (fabricpath-oam)
To configure a FabricPath OAM service, use the service tag command in FabricPath OAM profile configuration mode. To remove the FabricPath OAM service, use the no form of this command.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
set
To specify a value for a configured parameter, use the set command in parameter instance configuration mode.
Syntax Description
Command History
Examples
The following example shows how to specify a value for a configured parameter:
Device> enable Device# configure terminal Device(config)# param-list param-prof1-list Device(config-param-list)# define ipaddr ipaddr Device(config-param-list)# define prog1 string Device(config-param-list)# define segid integer Device(config-param-list)# define vlan_num integer Device(config-param-list)# instance param-prof1-inst1 Device(config-param-inst)# set ipaddr 192.0.2.1/24 Device(config-param-inst)# set prog1 vrf-300 Device(config-param-inst)# set segid 6300 Device(config-param-inst)# set vlan_num 300 Device(config-param-inst)# end
Related Commands
Command
Description
show clock
Syntax Description
Command History
Release Modification —
This command was introduced in a release earlier than Cisco NX-OS Release 7.0(0)N1(1).
Examples
This example shows how to display the clock setting:
Device# show clock Fri Jun 13 02:19:20 PDT 2008This example shows how to display the clock setting and the summer-time (daylight saving time) configuration:
Device# show clock detail Fri Jun 13 02:19:20 PDT 2008 summer-time configuration: -------------------------- timezone name: PDT starts : 1 Sunday March at 02:00 hours Ends : 1 Sunday November at 02:00 hours Minute offset: 60show config-profile
To display details of created and applied profiles, use the show config-profile in privileged EXEC mode.
Command History
Usage Guidelines
Use the configure profile command to create profiles and to assign a list of commands to the profile in the device. Once a profile is created with a valid parameter list and parameter instances, apply the profile using the apply profile command. Use > to redirect the configuration profile to a file and >> to redirect it to a file in append mode.
Examples
The following sample output from the show config-profile command displays details of the param-prof1 profile:
Device(config)# show config-profile param-prof1 config-profile param-prof1 interface vlan $vlan_num ip local-proxy-arp ip proxy-arp fabric forwarding mode proxy-gateway ip address $ipaddr no ip redirects vrf member $prog1 no shutdown vlan $vlan_num vn-segment $segid applied: param-prof1-inst1
Related Commands
Command
Description
Related Information
Applies a configuration profile to configure hosts.
Configures a profile.
Verifies if all configurations are correct for a configured profile.
show evb
To display information associated with Edge Virtual Bridging (EVB), use the show evb command in privileged EXEC mode.
show evb [ [ hosts | vsi ] [ detail | summary ] [ interface ethernet slot-number ] [ ip ipv4-address ] [ ipv6 ipv6-address ] [ mac mac-address ] [ vlan vlan-id ] [ vni vni-id ] ]
Syntax Description
hosts (Optional) Displays information about hosts in an EVB session.
vsi (Optional) Displays information about Virtual Station Interface (VSI) in an EVB session.
detail (Optional) Displays detailed information about hosts or VSI in an EVB session.
summary (Optional) Displays summarized information about hosts or VSI in an EVB session.
interface (Optional) Displays information about hosts or VSI by the interface in an EVB session.
ethernet slot-number (Optional) Specifies information about the Ethernet IEEE 802.3z interface.
ip ipv4-address (Optional) Displays information about hosts or VSI by the IPv4 address in an EVB session.
ipv6 ipv6-address (Optional) Displays information about hosts or VSI by the IPv6 address in an EVB session.
mac mac-address (Optional) Displays information about hosts or VSI by the MAC address in an EVB session.
vlan vlan-id (Optional) Displays information about hosts or VSI by the VLAN in an EVB session.
vni vni-id (Optional) Displays information about hosts or VSI by the Virtual Network Identifier (VNI) in an EVB session.
Command History
Usage Guidelines
Use the feature evb command to enable the EVB session. This, in turn, enables the evb keyword in the show command on the device.
Examples
The following is sample output from the show evb command:
Device# show evb EVB (Edge Virtual Bridge) Role : VDP bridge VDP MAC address : 0180.c200.0000 (Nearest Bridge) 0123.4567.89ab (User) Resource wait init : 21 (~ 20 sec) Keep-alive init : 21 (~ 20 sec) No. received vdpdu : 0 No. dropped vdpdu : 0 No. received tlv : 0 No. received mgr tlv : 0 No. received assoc tlv : 0 No. received cmd : 0
Related Commands
Command
Description
Related Information
Enables the EVB session on a device.
show fabric access connections
To display the connection status of a device or a user in the fabric access network, use the show fabric access connections command in privileged EXEC mode.
Command History
Usage Guidelines
Use the show fabric access connections command to view the status of devices and users in the fabric access network. The fabric access ping parameters include status, interval, response time, and retry.
Examples
This example shows how to display the connection status of the device and user in the fabric access network:
Device# show fabric access connections XMPP Ping : Status = Enabled Interval = 60 second(s) Response = 10 second(s) Retry = 5 time(s) Device Connection : JID = device1@host1.com State = CLOSEDThe following table describes the significant fields shown in the display.
Table 2 show fabric access connections Field Description Field
Descriptions
Status
Specifies whether the fabric access connection is reachable or unreachable.
Interval
Specifies how often fabric access ping messages are sent out to the server.
Response
Specifies the expected response time to receive a ping response from the server.
Retry
Specifies the number of ping messages sent without receiving a successful response from the server before declaring the server dead.
Device Connection:
Specifies the details of a device.
JID
Specifies the Jabber ID details.
State
Specifies the state of the device connection.
Related Commands
Command
Description
Related Information
Displays the groups that a device or user is currently subscribed to or a list of members existing in a particular group.
Checks which remote devices failed to respond to the CLI requests sent through the single point of management feature.
show fabric access group
To display the groups that a device or user is currently subscribed to or a list of members existing in a particular group, use the show fabric access group command in privileged EXEC mode.
Syntax Description
device (Optional) Lists the groups that the currently logged-in device belongs to.
members group-name (Optional) Lists the members belonging to a group.
user (Optional) Lists the groups that the currently logged-in user belongs to.
Command History
Usage Guidelines
The show fabric access group command is part of the single point of management feature and helps the device or user find the names of existing groups to join. You can also create a group in the Extensible Messaging and Presence Protocol (XMPP) server using the fabric access create group group-name command.
Examples
The following sample output from the show fabric access group command displays all the groups that the device or user is currently subscribed to:
Device# show fabric access group group1 group2 group3 group4 group5 Total 5 groups
The following sample output from the show fabric access group device command displays the groups that the currently logged-in device is subscribed to:
Device# show fabric access group device group3 group4
The following sample output from the show fabric access group members command displays the members belonging to group2:
Device# show fabric access group members group2 admin@host-1.com device3@host-2.com Total 2 members
Related Commands
Command
Description
Related Information
Logs in to a fabric access server.
Displays the groups that a device or user is currently subscribed to or a list of members existing in a particular group.
Checks which remote devices failed to respond to the CLI requests sent through the single point of management feature.
show fabric access statistics
To check which remote devices failed to respond to the CLI requests sent through the single point of management feature, use the show fabric access statistics command in privileged EXEC mode.
Command History
Usage Guidelines
Use the fabric access attach command or the fabric access send command to send CLI requests to a specified device or group.
Examples
The following sample output from the show users command displays the remote device “spom2-test2@host1.com” that did not respond to the show users command.
Device# show fabric access statistics Device not replied(1) to CLI "sh users" on 2013-04-18 18:27:53 spom2-test2@host1.com/(fabric-access-device)
Related Commands
Command
Description
Related Information
Sends a command to a host device or a list of host devices without entering the fabric access group chat mode.
Sends a CLI command to a group of devices without entering fabric access group chat mode.
Displays the connection status of a device or a user that is connected in the fabric access network.
show fabric connectivity cable-plan
To display the cable plan available in the system memory, use the show fabric connectivity cable-plan command in privileged EXEC mode.
Command History
Usage Guidelines
This command displays information specific to the cable plan that is imported. The cable plan information includes the location of the imported file, mismatch delay configuration values, cable-plan-check enable values, and details of all entries that are related to the device.
If no cable plan is imported, the output of the command will not display anything.
Configure the feature lldp command before enabling cable management.
The following table provides a list of cable plan status codes:
Table 3 Cable Plan Status Codes Status Code
Description
Ok
Everything works as per the configured cable plan checks; the cable-plan check is a success.
Unkn
Unable to determine the status. Usually happens when a cable plan is not enforced or there is no link between peers.
ErrC
The port is error-disabled due to a mismatch (the peer does not match the entry in the cable plan).
S
Specified at the end of a status. Usually happens when the port is stale in the device because the neighboring port interface is in an error-disabled mode.
Enp
An entry is not present in the cable plan. Usually happens when there is no cable plan record; however, there is a link between peers.
Examples
The following is sample output from the show fabric connectivity cable-plan command:
Device# show fabric connectivity cable-plan ------------------------------------------------------------------------------- Cable-Plan Enforce: Enforced File: No File Mismatch Delay Config: Disabled Mismatch Delay Timeout: 0 DeviceID: host1.spine1 Last Deployed: Md5: Size: 0 ------------------------------------------------------------------------------- Codes: (Ok) Normal, (ErrC) Cabling Plan error, (S) Stale entry (Unkn) Unknown, (Enp) Entry not present in Cable-Plan Current Cable-Plan: ------------------------------------------------------------------------------- lChassisId lPortId rChassisId rPortId StatusThe following example shows how to enable cable management and import a cable plan from the local location. If a cable plan is not imported the output of the show fabric connectivity cable-plan will not display anything:Device# configure terminal Device(config)# feature lldp Device(config)# feature cable-management Device(config)# exit Device# fabric connectivity cable-plan import bootflash:cp.xml Success: Imported cable-plan: /bootflash/cp.xml Device#
Related Commands
Command
Description
Related Information
Imports a cable plan from a local or a remote location.
show fabric connectivity neighbors
To display cache information about fabric connectivity neighbors, use the show fabric connectivity neighbors command in privileged EXEC mode.
show fabric connectivity neighbors [ errors | interface { ethernet slot/chassis | mgmt interface-number } | tier { lower | upper } ]
Syntax Description
errors (Optional) Displays information about neighbors that are in cabling error state.
interface (Optional) Displays the list of neighbors connected to an interface.
ethernet slot/chassis (Optional) Displays information about the specified Ethernet 802.3z interface. The range for the slot/chassis argument is from 1 to 253.
mgmt interface-number (Optional) Displays information about the specified management interface.
tier (Optional) Displays the neighbors connected to an adjacent tier.
lower (Optional) Displays the neighbors connected to an adjacent lower tier.
upper (Optional) Displays the neighbors connected to an adjacent upper tier.
Command History
Usage Guidelines
This command displays the data received by a device via the Link Layer Discovery Protocol (LLDP) type, length, values (TLVs). The command also displays the local chassis and port IDs, remote chassis and port ID, the tier levels of the remote chassis, the expected cable-plan entry, and status of the configuration.
Examples
The following is sample output from the show fabric connectivity neighbors command:
Device# show fabric connectivity neighbors ------------------------------------------------------------------------------- Local System: Device Tier Config: Enabled Device Tier Level: 2 Mismatch Delay Config: Disabled Mismatch Delay Timeout: 0 Cable-Plan Enforce: Enabled DeviceID: host1 ChassisID: 000a.0001.0008 ------------------------------------------------------------------------------- Codes: (Ok) Normal, (ErrT) Tier error , (ErrC) Cable-Plan error, (V) VPC Peer connection, (S) Stale entry, (Unkn) Unknown, (Enp) Entry not present in Cable-Plan, (Tl) Tier level Neighbor Table: ------------------------------------------------------------------------------- Local DeviceID PortID Tl Cable-Plan Status Intf Entry Eth2/1 leaf0 Eth2/2 Unk Unkn Ok Eth2/2 leaf1 Eth2/2 Unk Unkn Ok Eth2/3 leaf2 Eth2/2 Unk Unkn Ok,S Eth2/4 stewong-1 Eth2/2 Unk Unkn Ok Eth2/5 leaf4 Eth2/2 Unk Unkn Ok Eth2/6 leaf5 Eth2/2 Unk Unkn Ok Eth2/7 leaf6 Eth2/2 Unk Unkn Ok,S Eth2/8 leaf7 Eth2/2 Unk Unkn Ok Total entries displayed: 8
Related Commands
Command
Description
Related Information
Clears all information about neighbors from the neighbor cache.
show fabric database statistics
To display fabric database statistics, use the show fabric database statistics command in privileged EXEC mode.
Syntax Description
type (Optional) Defines the type of statistics to display.
asset (Optional) Displays statistics of asset databases.
cabling (Optional) Displays statistics of cabling databases.
profile (Optional) Displays statistics of profile databases.
Command History
Examples
The following is sample output from the show fabric database statistics command where statistics for all databases are displayed. The fields are self-explanatory.
Device# show fabric database statistics Global Stats: DB-Type Requests Dispatched Not dispatched Re-dispatched --------------------------------------------------------------------- Asset 3 1 2 0 Cabling 0 0 0 0 Profile 1 1 0 0 --------------------------------------------------------------------- TOTAL 4 2 2 0 Per Database stats: T Prot Server/DB Reqs OK NoRes Err TmOut Pend ------------------------------------------------------------------------------- A LDAP host91 1 0 1 0 0 0 ou=segments,dc=cisco,dc=com P LDAP host91 1 1 0 0 0 0 ou=profiles,dc=cisco,dc=com Legend: T-Type (A-Asset, C-Cabling, P-Profile)
Related Commands
Command
Description
Related Information
Configures the external database.
show fabric forwarding
To display information about the host databases and configuration of the host mobility manager (HMM) component, use the show fabric forwarding command in privileged EXEC mode.
show fabric forwarding { host-db | internal { af | buffers | clients | debug | event-history { auto-config | errors | events | msgs | packets | periodic | trace} | intf { local-host-db | remote-host-db} | mac-bd local-host-db | mem-stats | migration-vips | state | svi-info | work-info} | { ip | ipv6} { aggregate-subnet-prefix | local-host-db | remote-host-db}}
Syntax Description
host-db Displays host database information.
internal Displays internal HMM information.
af Displays address family information.
buffers Displays the internal buffer state maintained by HMM.
clients Displays RPM clients.
debug Displays internal debug information maintained by HMM.
event-history Displays HMM event logs.
auto-config Displays auto-configuration events of the HMM process.
errors Displays HMM error logs.
events Displays HMM process events.
msgs Displays HMM message logs.
packets Displays HMM process packet events.
periodic Displays HMM process periodic events.
trace Displays processing logs of HMM commands.
intf Displays interface on which local host is learnt.
local-host-db Displays HMM local host database information.
remote-host-db Displays HMM remote host database information.
mac-bd Displays MAC-Bridge Domain (MAC-BD) information.
mem-stats Displays dynamic memory statistics.
migration-vips Displays HMM VIPs DB for migration.
state Displays internal state information maintained by HMM.
svi-info Displays switched virtual interface (SVI) information.
work-info Displays internal HMM worker thread information.
ip Displays IP information.
ipv6 Displays IPv6 information.
aggregate-subnet-prefix Displays HMM aggregate subnet prefix information.
Command History
Examples
This command shows how to display host database information:
Device# show fabric forwarding host-dbThis command shows how to display address family information:
Device# show fabric forwarding internal af Number of URIB buffers in use/xid : 0/0 Number of U6RIB buffers in use/xid : 0/0 Number of VRFs in Update RIB List : 0 Update RIB event signalled count : 0 Update RIB thread wake up count : 0This command shows how to display the internal buffer state maintained by HMM:
Device# show fabric forwarding internal buffers HMM buffers informationThis command shows how to display RPM clients:
Device# show fabric forwarding internal clients Name Uuid Sap Flags Stats(R/A/N/F) mrib 0x113 256 0x40 1/1/0/0 arp 0x10c 279 0xce80 1/1/0/0 adjmgr 0x108 252 0x680 1/1/0/0 fwm 0x28c 602 0x7aa2 1/1/0/0 ISIS_L2MP 0x118 432 0x1ff0 1/1/0/0 IP 0x221 263 0xc3a0 1/1/0/0 ICMPv6 0x10e 282 0xcec0 1/1/0/0This command shows how to display internal debug information maintained by HMM:
Device# show fabric forwarding internal debug HMM Debug information Debug Flags : Off Debug-filters : OffThis command shows how to display auto-configuration events of HMM process:
Device# show fabric forwarding internal event-history auto-config Process auto-config logs of HMM 1) Event:E_DEBUG, length:65, at 382460 usecs after Mon Dec 23 10:53:29 2013 [126] [10937]: Decrement outstanding PPM request (1/10) -> (0/10) 2) Event:E_DEBUG, length:65, at 376938 usecs after Mon Dec 23 10:53:29 2013 [126] [10937]: Decrement outstanding PPM request (2/10) -> (1/10) 3) Event:E_DEBUG, length:65, at 375093 usecs after Mon Dec 23 10:53:29 2013 [126] [10937]: Decrement outstanding PPM request (3/10) -> (2/10) 4) Event:E_DEBUG, length:65, at 373241 usecs after Mon Dec 23 10:53:29 2013 [126] [10937]: Decrement outstanding PPM request (4/10) -> (3/10) --More--This command shows how to display HMM error logs:
Device# show fabric forwarding internal event-history errors Error events for HMM ProcessThis command shows how to display HMM process events:
Device# show fabric forwarding internal event-history events Process Event logs of HMM 1) Event:E_DEBUG, length:58, at 788428 usecs after Sun Jan 12 09:44:36 2014 [117] [10937]: Received L3_PROTOCOL_STATE change msg, num 1 2) Event:E_DEBUG, length:58, at 786919 usecs after Sun Jan 12 09:44:36 2014 [117] [10937]: Received L3_PROTOCOL_STATE change msg, num 1 3) Event:E_DEBUG, length:58, at 784142 usecs after Sun Jan 12 09:44:36 2014 [117] [10937]: Received L3_PROTOCOL_STATE change msg, num 1 4) Event:E_DEBUG, length:51, at 777076 usecs after Sun Jan 12 09:44:36 2014 [117] [10937]: Received IF_CREATED change msg, num 1 --More--This command shows how to display HMM message logs:
Device# show fabric forwarding internal event-history msgs Msg events for HMM Process 1) Event:E_DEBUG, length:45, at 602003 usecs after Mon Jan 13 05:14:48 2014 [100] [32706]: nvdb: transient thread created 2) Event:E_DEBUG, length:83, at 601402 usecs after Mon Jan 13 05:14:48 2014 [100] [10944]: comp-mts-rx opc - from sap 27057 cmd hmm_show_internal_event_ hist_cmd 3) Event:E_DEBUG, length:42, at 918941 usecs after Mon Jan 13 05:14:15 2014 [100] [32699]: nvdb: terminate transaction 4) Event:E_DEBUG, length:45, at 896918 usecs after Mon Jan 13 05:14:15 2014 [100] [32699]: nvdb: transient thread created --More--This command shows how to display HMM process packet events:
Device# show fabric forwarding internal event-history packets Process packet logs of HMMThis command shows how to display HMM process periodic events:
Device# show fabric forwarding internal event-history periodic Process periodic event logs of HMM 1) Event:E_DEBUG, length:44, at 786068 usecs after Mon Jan 13 05:16:01 2014 [123] [10942]: HMM cleanup thread in progress 2) Event:E_DEBUG, length:44, at 785935 usecs after Mon Jan 13 05:15:56 2014 [123] [10942]: HMM cleanup thread in progress 3) Event:E_DEBUG, length:43, at 62257 usecs after Mon Jan 13 05:15:55 2014 [123] [10936]: Invoke profile bookkeeping... 4) Event:E_DEBUG, length:44, at 785801 usecs after Mon Jan 13 05:15:51 2014 [123] [10942]: HMM cleanup thread in progress --More--This command shows how to display processing logs of HMM commands:
Device# show fabric forwarding internal event-history trace Trace logs of HMM 1) Event:E_DEBUG, length:58, at 210400 usecs after Mon Dec 23 10:53:29 2013 [119] [10935]: mts data queue bind success dynamic_sap=3137This command shows how to display HMM local host database information:
Device# show fabric forwarding internal intf local-host-dbThis command shows how to display HMM remote host database information:
Device# show fabric forwarding internal intf remote-host-dbThis command shows how to display MAC-BD information:
Device# show fabric forwarding internal mac-bd local-host-dbThis command shows how to display dynamic memory statistics:
Device# show fabric forwarding internal mem-stats Mem stats for HMM Process Private Mem stats for UUID : Malloc track Library(103) Max types: 5 -------------------------------------------------------------------------------- Curr alloc: 1728 Curr alloc bytes: 120844(118k) Private Mem stats for UUID : Non mtrack users(0) Max types: 161 -------------------------------------------------------------------------------- Curr alloc: 740 Curr alloc bytes: 75035(73k) Private Mem stats for UUID : libsdwrap(115) Max types: 22 -------------------------------------------------------------------------------- Curr alloc: 34 Curr alloc bytes: 2441304(2384k) Private Mem stats for UUID : Associative_db library(175) Max types: 14 -------------------------------------------------------------------------------- Curr alloc: 156 Curr alloc bytes: 4400(4k) Private Mem stats for UUID : Event sequence library(158) Max types: 4 -------------------------------------------------------------------------------- Curr alloc: 0 Curr alloc bytes: 0(0k) --More--This command shows how to display the HMM VIPs DB for migration:
Device# show fabric forwarding internal migration-vipsThis command shows how to display internal state information maintained by HMM:
Device# show fabric forwarding internal state HMM Internal Global State Start reason : configuration Sup state : Active Restart type : Stateless All core components up : Yes Comp Uuid Up Dynamic Init clis 261 True False True ifmgr 318 True False True adjmgr 264 True False True arp 268 True False True icmpv6 270 True False True netstack 545 True False True l3vm 445 True False True urib 273 True False True u6rib 274 True False True unknown 652 True False True rpm 305 True False True unknown 593 False True False bgp 283 False True False unknown 406 False True False unknown 68 False True False pktmgr 263 True False True unknown 1210 True True True unknown 704 True True True Libraries registered : IP IPv6 HMM thread : 0x68b2cb90 Debug Flags : OffThis command shows how to display SVI information:
Device# show fabric forwarding internal svi-info HMM Global config information Fabric id : 0 Conversational Learning : False Urib/U6rib Conv Aging Timeout : 1800/1800 (secs) Switch role : leaf Anycast Gateway mac : 0000.0000.0000 Fabric control segment/Notify : -/False Migration count : 0 Migration : False Port tracking : - HMM SVI information AM thread halted/count : No/0 #RARP on Mgmt intf : 407 #Recvd non Ether pkts : 0 #Recvd non RARP pkts : 0 #Hosts with same mac-bd : 0This command shows how to display internal HMM worker thread information:
Device# show fabric forwarding internal work-info HMM Worker information Work in Progress : False Remote Hosts cleanup pending/progress : False/False Fabric ID change pending/progress : False/False #Worker walk : 0 #No work : 0 #Signal worker thread : 0This command shows how to display IP HMM aggregate subnet prefix information:
Device# show fabric forwarding ip aggregate-subnet-prefixThis command shows how to display IP HMM local host database information:
Device# show fabric forwarding ip local-host-dbThis command shows how to display IP HMM remote host database information:
Device# show fabric forwarding ip remote-host-dbThis command shows how to display IPv6 HMM aggregate subnet prefix information:
Device# show fabric forwarding ipv6 aggregate-subnet-prefixThis command shows how to display IPv6 HMM local host database information:
Device# show fabric forwarding ipv6 local-host-dbThis command shows how to display IPv6 HMM remote host database information:
Device# show fabric forwarding ipv6 remote-host-db
Related Commands
Command
Description
Related Information
Enables configuring host mobility-specific commands.
show fabric multicast
To display routes of the fabric multicast process, use the show fabric multicast command in privileged EXEC mode.
show fabric multicast { ipv4 | ipv6 } { mroute | rp-grange | ssm-range } vrf { vrf-name | all | default | management }
Syntax Description
ipv4 Displays IPv4 information.
ipv6 Displays IPv6 information.
mroute Displays fabric multicast routes.
rp-grange Displays rendezvous point (RP) group ranges.
ssm-range Displays source specific multicast (SSM) ranges.
vrf Displays VRF information.
vrf-name VRF name.
all Displays information about all VRFs learnt by the fabric multicast process.
default Displays information about the default VRFs learnt by the fabric multicast process.
management Displays information about the management learnt by the fabric multicast process.
Command History
Usage Guidelines
The fabric multicast process has three kind of routes: multicast routes, RP group ranges, and SSM ranges.
Examples
The following is sample output from the show fabric multicast ipv4 mroute vrf all command:
Device# show fabric multicast ipv4 mroute vrf all Fabric mroute Database for VRF "default" VNI: 0 Fabric Mroute: (*, *) Interested Fabric Nodes: 1.1.0.5 (real) Fabric mroute Database for VRF "vpn1" VNI: 5002 Fabric Mroute: (*, *) Interested Fabric Nodes: This node 1.1.0.1 (real) Fabric Mroute: (*, 0.0.0.1/32) Interested Fabric Nodes: 1.1.0.1 (aggr) Fabric Mroute: (18.18.18.18/32, 0.0.0.1/32) Interested Fabric Nodes: 1.1.0.1 (real) Fabric mroute Database for VRF "vpn2" VNI: 5003 Fabric Mroute: (*, *) Interested Fabric Nodes: This node 1.1.0.1 (real) Fabric mroute Database for VRF "vpn3" VNI: 5004 Fabric Mroute: (*, *) Interested Fabric Nodes: This node 1.1.0.1 (real) Fabric mroute Database for VRF "vpn4" VNI: 5005 Fabric Mroute: (*, *) Interested Fabric Nodes: This node 1.1.0.1 (real)The following is sample output from the show fabric multicast ipv4 rp-grange vrf all command:
Device# show fabric multicast ipv4 rp-grange vrf all RP Grange Database for VRF "default" VNI: 0 RP Grange Database for VRF "vpn1" VNI: 5002 RP: 18.18.18.18 Group Range: 238.0.0.0/16 RP: 19.19.19.19 Group Range: 239.0.0.0/16 RP Grange Database for VRF "vpn2" VNI: 5003 RP Grange Database for VRF "vpn3" VNI: 5004 RP Grange Database for VRF "vpn4" VNI: 5005The following is sample output from the show fabric multicast ipv4 ssm-range vrf all command:
Device# show fabric multicast ipv4 ssm-range vrf all SSM Range Database for VRF "default" VNI: 0 SSM Group Range: 232.0.0.0/8 SSM Range Database for VRF "vpn1" VNI: 5002 SSM Group Range: 232.0.0.0/8 SSM Range Database for VRF "vpn2" VNI: 5003 SSM Group Range: 232.0.0.0/8 SSM Range Database for VRF "vpn3" VNI: 5004 SSM Group Range: 232.0.0.0/8 SSM Range Database for VRF "vpn4" VNI: 5005 SSM Group Range: 232.0.0.0/8
Related Commands
Command
Description
Related Information
Enables multicast enhanced fabric forwarding for a particular VRF.
Displays the global state associated with the fabric multicast process.
Displays the VRFs learned by the fabric multicast process and VNIs configured under the VRFs.
show fabric multicast globals
To display the global state associated with the fabric multicast process, use the show fabric multicast globals command in privileged EXEC mode.
Command History
Related Commands
Command
Description
Related Information
Enables multicast enhanced fabric forwarding for a particular VRF.
show fabric multicast vrf
To display the virtual routing and forwarding (VRFs) learned by the fabric multicast process and virtual network identifiers (VNI) configured under the VRFs, use the show fabric multicast vrf command in privileged EXEC mode.
Syntax Description
vrf-name (Optional) VRF name.
all (Optional) Displays all VRFs learned by the fabric multicast process and the VNIs configured under the VRFs.
default (Optional) Displays VNIs configured under the default VRF.
management (Optional) Displays VNIs configured under the management VRF.
Command History
Related Commands
Command
Description
Related Information
Enables multicast enhanced fabric forwarding for a particular VRF.
Displays routes of the fabric multicast process.
Displays the global state associated with the fabric multicast process.
show fabricpath isis
To display information about FabricPath Intermediate System-to-Intermediate System (IS-IS), use the show fabricpath isis command in privileged EXEC or global configuration mode.
Command History
Usage Guidelines
This command requires an Enhanced Layer 2 license. You can store the output of the command in an external file by including the > symbol after the command, followed by the name of the file and the type of storage location. You can add the output from the command to an existing file using the >> symbol.
Examples
The following example shows how to display information about FabricPath IS-IS in privileged EXEC mode:
Device(config)# show fabricpath isis Fabricpath IS-IS domain : default System ID : 547f.eea9.f73c IS-Type : L1 Fabric-Control SVI: Unknown SAP : 432 Queue Handle : 11 Maximum LSP MTU: 1492 Graceful Restart enabled. State: Inactive Last graceful restart status : none Graceful Restart holding time:60 Metric-style : advertise(wide), accept(wide) Start-Mode: Complete [Start-type configuration] Area address(es) : 00 Process is up and running CIB ID: 1 Interfaces supported by Fabricpath IS-IS : Level 1 Authentication type and keychain not configured Authentication check specified LSP Lifetime: 1200 L1 LSP GEN interval- Max:8000 Initial:50 Second:50 L1 SPF Interval- Max:8000 Initial:50 Second:50 MT-0 Ref-Bw: 400000 Max-Path: 16 Address family Swid unicast : Number of interface : 0 Distance : 115 L1 Next SPF: Inactiveshow fabricpath isis interface
To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) interface, use the show fabricpath isis interface command in privileged EXEC or global configuration mode.
Syntax Description
brief Displays brief information about the IS-IS interface.
ethernet Displays information about the Ethernet interface.
slot/ port Port number within a particular slot. Range is from 1 to 128.
port-channel Displays the information about port-channel interface.
channel-number Port-channel number. Range is from 1 to 4096.
Command History
Release Modification 6.0(2)N1(1) This command was introduced.
7.0(0)N1(1) This command was modified in Cisco NX-OS Release 7.0(0)N1(1). The QSFP-module argument was removed.
Usage Guidelines
The show fabricpath isis interface command requires an Enhanced Layer 2 license. You can store the output of the command in an external file by including the > symbol after the command, followed by the name of the file and the type of storage location. You can add the output from the command to an existing file using the >> symbol.
Examples
This example shows how to display brief information about the FabricPath IS-IS interface:
Device# show fabricpath isis interface brief Interface Type Idx State Circuit MTU Metric Priority Adjs/AdjsUp -------------------------------------------------------------------------------- Ethernet7/1 P2P 1 Up/Ready 0x01/L1 1500 400 64 1/1 Ethernet7/13 P2P 2 Up/Ready 0x01/L1 1500 400 64 1/1 Ethernet7/18 P2P 3 Up/Ready 0x01/L1 1500 40 64 1/1show fabricpath oam loopback
To display information about FabricPath Operation, Administration, and Maintenance (OAM) loopback, use the show fabricpath oam loopback command in privileged EXEC mode.
show fabricpath OAM loopback { database | statistics [ summary ] | status } [ session session-handle ]
Syntax Description
database Displays information about the FabricPath OAM loopback database.
statistics Displays FabricPath OAM loopback statistics.
summary (Optional) Displays FabricPath OAM loopback statistics summary.
status Displays FabricPath OAM loopback status.
session session-handle (Optional) Displays information about FabricPath OAM loopback for a specific session.
Command History
Usage Guidelines
When a ping command returns errors and the details are not available in the command output, you can use the show fabricpath OAM loopback database command to see the details.
A session is an auto-generated identifier for a proactive loopback request.
Examples
The following is sample output from the show fabricpath OAM loopback statistics command.
Device# show fabricpath OAM loopback statistics Sender Handle: 10 Last Clear of Statistics: Never Loopback Reply/notification return code distribution: V – VLAN nonexistent (0) - 0 v – VLAN in suspended state (1) - 0 C – Cross Connect Error (2) - 0 U – Unknown RBridge nickname (3) - 0 n – Not AF (4) - 0 M – MTU mismatch (5) - 0 I – Interface not in forwarding state (6) - 0 S – Service Tag nonexistent (7) - 0 s – Service Tag in suspended state (8) - 0 ! - success - 5 m – malformed request - 0 Q – request not sent - 0 . – timeout - 0 D – Destination unreachable - 0 X – Unknown return code - 0The following is sample output from the show fabricpath OAM loopback statistics summary command.
Device# show fabricpath OAM loopback statistics summary Loopback Requests: sent (5)/received (0)/timeout (0)/unsent (0) Loopback Replies: sent (0)/received (5)/unsent (0)The following is sample output from the show fabricpath OAM loopback status command.
Device(#) show fabricpath OAM loopback status Sender Handle Type State 1 on demand completed 10 Asynchronous running(No Error)The following is sample output from the show fabricpath OAM loopback database command.
Device(#) show fabricpath OAM loopback database Loopback Request from switch-id 10 Sender handle: 1 Last Clear of Statistics: Never Start time: 00:00:10 End time: NA Id: sent: 5 timeout: 0 unsent: 0 Interface: NA Hop limit: 2 Flags: 0 switch-id: 10 Forward Flow Entropy: Default Reverse Flow Entropy: NA Service Tag: NA Vlan: 10 out of band: No Reverse Path Req(ecmp/nickname): NA Control Plane Verification Req(ecmp/nickname):NA Reply: received (5) Reverse Resp (ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd)) Forward Resp (ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd))
Related Commands
Command
Description
Related Information
Clears statistics for FabricPath OAM loopback.
Configures a FabricPath OAM profile.
Tests the FabricPath OAM reachability.
show fabricpath oam mtrace
To display information about fabricpath Operation, Administration, and Maintenance (OAM) mtrace, use the show fabricpath oam mtrace command in privileged EXEC mode.
Syntax Description
database Displays information about fabricpath OAM mtrace database.
statistics Displays fabricpath OAM mtrace statistics.
summary (Optional) Displays fabricpath OAM mtrace statistics summary.
Command History
Usage Guidelines
When the mtrace command returns errors and the details are not available in the command output, you can use the show fabricpath oam mtrace database command to see the details.
Examples
The following is sample output from the show fabricpath oam mtrace statistics command.
Device(#) show fabricpath OAM mtrace statistics Mtrace Reply/notification return code distribution: V – VLAN nonexistent (0) - 0 v – VLAN in suspended state (1) - 0 C – Cross Connect Error (2) - 0 U – Unknown RBridge nickname (3) - 0 n – Not AF (4) - 0 M – MTU mismatch (5) - 0 I – Interface not in forwarding state (6) - 0 S – Service Tag nonexistent (7) - 0 s – Service Tag in suspended state (8) - 0 ! - success - 5 m – malformed request - 0 Q – request not sent - 0 . – timeout - 0 D – Destination unreachable - 0 X – Unknown return code - 0 Mtrace Requests: sent (5)/received (0)/timedout (0)/unsent (0) Mtrace Replies: sent (0)/received (25)/unsent (0)The following is sample output from the show fabricpath oam mtrace statistics summary command.
Device(#) show fabricpath OAM mtrace statistics summary Mtrace Requests: sent (5)/received (0)/timeout (0)/unsent (0) Mtrace Replies: sent (0)/received (25)/unsent (0)The following is sample output from the show fabricpath oam mtrace database command.
Device(#) show fabricpath OAM mtrace database Sender handle: 2 Mtrace request from switch-id 10 Id: sent: 1 timeout: 0 unsent: 0 Tree ID: 1 Vlan : 5 Hop limit: 2 Forward Flow Entropy: Default Reverse Flow Entropy: NA Service Tag: NA Vlan: 10 out of band: No Control Plane Verification Req(ecmp/nickname):1/15 Reply: received (2) Control Plane Resp from switch-id 112 2 next hop Rbridges Switch-id 11 ifindex 0x00010023 Slot 3 Port 5 Speed 10M State – forwarding no error Switch-id 789 ifindex 0x00230782 Slot 5 Port 11 Speed 1G State – forwarding no error ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd) Control Plane Resp from switch-id 13 ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd)
Related Commands
Command
Description
Related Information
Clears statistics for FabricPath OAM mtrace.
Configures a FabricPath OAM profile.
Traces the path from a source to a destination branch for FabricPath OAM.
show fabricpath oam notification
To display information about FabricPath Operation, Administration, and Maintenance (OAM) notifications, use the show fabricpath oam notification command in privileged EXEC mode.
Syntax Description
database Displays information about the FabricPath OAM notification database.
statistics Displays information about FabricPath OAM notification statistics.
Command History
Related Commands
Command
Description
Related Information
Clears statistics for FabricPath OAM notification.
Configures a FabricPath OAM profile.
show fabric oam traceroute
To display information about FabricPath Operation, Administration, and Maintenance (OAM), use the show fabricpath oam traceroute command in privileged EXEC mode.
Syntax Description
database Displays information about FabricPath OAM traceroute database.
session session-handle (Optional) Displays information about for FabricPath OAM traceroute for a specific session.
statistics Displays information about FabricPath OAM traceroute statistics.
summary (Optional) Displays FabricPath OAM traceroute statistics summary.
Command History
Usage Guidelines
When a traceroute command returns errors and the details are not available in the command output, you can use the show fabricpath OAM traceroute database command to see the details.
A session is an auto-generated identifier for a proactive traceroute request.
Examples
The following is sample output from the show fabricpath OAM traceroute statistics command.
Device# show fabricpath OAM traceroute statistics Last Clear of Statistics: Never Traceroute Reply/notification return code distribution V – VLAN nonexistent (0) - 0 v – VLAN in suspended state (1) - 0 C – Cross Connect Error (2) - 0 U – Unknown RBridge nickname (3) - 0 n – Not AF (4) - 0 M – MTU mismatch (5) - 0 I – Interface not in forwarding state (6) - 0 S – Service Tag nonexistent (7) - 0 s – Service Tag in suspended state (8) - 0 ! - success - 5 m – malformed request - 0 Q – request not sent - 0 . – timeout - 0 D – Destination unreachable - 0 X – Unknown return code - 0 Path Trace Requests: sent (5)/received (0)/timedout (0)/unsent (0) Path Trace Replies: sent (0)/received (5)/unsent (0)The following is sample output from the show fabricpath OAM traceroute statistics summary command.
Device# show fabricpath OAM traceroute statistics summary Path Trace Requests: sent (5)/received (0)/timeout (0)/unsent (0) Path Trace Replies: sent (0)/received (5)/unsent (0)The following is sample output from the show fabricpath OAM traceroute database command.
Device# show fabricpath OAM traceroute database Sender handle: 2 Path Trace Request from switch-id 10 Id: sent: 5 timeout: 0 unsent: 0 Interface: NA Hop limit: 2 Flags: 0 switch-id: 10 Forward Flow Entropy: Default Reverse Flow Entropy: NA Service Tag: NA Vlan: 10 out of band: No Reverse Path Req(ecmp/nickname): NA Control Plane Verification Req(ecmp/nickname):NA Reply: received (5) Reverse Resp (ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd)) Forward Resp (ecmp cnt: 1, (ecmp id: 0xFFFF, ifindex: 32, slot:0, port:0, state:10, state:fwd))
Related Commands
Command
Description
Related Information
Clears statistics for FabricPath OAM traceroute.
Configures a FabricPath OAM profile.
Discovers the FabricPath route.
show interface ethernet
To display the Energy Efficient Ethernet (EEE) status on an interface, use the show interface ethernet command.
Syntax Description
Command History
Examples
The following sample output shows the EEE status on an interface:
Device# show interface ethernet 2/6 Ethernet2/6 is down (Link not connected) admin state is up, Dedicated Interface Hardware: 10000 Ethernet, address: 0022.5579.de41 (bia 001b.54c1.af5d) MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, medium is broadcast auto-duplex, auto-speed, media type is 10G Beacon is turned off Auto-Negotiation is turned off Input flow-control is off, output flow-control is off Auto-mdix is turned off Rate mode is shared Switchport monitor is off EtherType is 0x8100 EEE (efficient-ethernet) : n/a Last link flapped never Last clearing of "show interface" counters never 0 interface resets 30 seconds input rate 0 bits/sec, 0 packets/sec 30 seconds output rate 0 bits/sec, 0 packets/sec Load-Interval #2: 5 minute (300 seconds) input rate 0 bps, 0 pps; output rate 0 bps, 0 pps L3 in Switched: ucast: 0 pkts, 0 bytes - mcast: 0 pkts, 0 bytes . . .show interface status err-disabled
To display information about interfaces that are in error-disabled state, use the show interface status err-disabled command in privileged EXEC mode.
Command History
Usage Guidelines
Miscabling interfaces, or interfaces in error-disabled state, prevent all traffic from leaving these interfaces. Error disabling is one way of bringing down an interface via software.
Examples
The following is sample output from the show interface status err-disabled command:
Device# show interface status err-disabled ---------------------------------------------------------------------------- Port Name Status Reason ---------------------------------------------------------------------------- Eth2/1 -- down fabric tier-mismatch
Related Commands
Command
Description
Related Information
Enables error-disable detection for an application.
Enables automatic recovery of an application from an error-disabled state.
Configures the error disable recovery timer.
show ip arp internal event-history
To view Address Resolution Protocol (ARP) event log messages, use the show ip arp internal event-history command in privileged EXEC mode.
show ip arp internal event-history { cli | client-errors | client-event | control | errors | event | ha | ip-sync-event | lcache | lcache-errors | msgs | packet | snmp | sync-event}
Syntax Description
cli Displays ARP CLI-related event log messages.
client-errors Displays ARP client error log messages.
client-event Displays ARP client event log messages.
control Displays ARP control event log messages.
errors Displays ARP error log messages.
event Displays ARP event log messages.
ha Displays ARP High Availability (HA)-related log messages.
ip-sync-event Displays ARP-related layer 3 (L3) routing traffic over virtual port channel (vPC) event log messages.
lcache Displays ARP lcache log messages.
lcache-errors Displays ARP lcache error log messages.
msgs Displays ARP log messages.
packet Displays ARP packet log messages.
snmp Displays Simple Network Management Protocol (SNMP) log messages.
sync-event Displays ARP-related Cisco Fabric Services (CFS) and multichassis EtherChannel Manager (MCECM) log messages.
Command History
Examples
The following sample output displays ARP error log messages:
Device# show ip arp internal event-history errors 1)Event :E_DEBUG, length:40, at 763259 usecs after Wed Oct 9 16:37:49 2013 [120] [4174]: Zero Ip on iod Ethernet2/1 2)Event:E_DEBUG, length:40, at 755456 usecs after Wed Oct 9 16:37:48 2013 [120] [4174]: Zero Ip on iod Ethernet2/2 3)Event:E_DEBUG, length:34, at 52925 usecs after Wed Oct 9 16:21:37 2013 [120] [4174]: Zero Ip on iod mgmt0
Related Commands
Command
Description
Related Information
Displays current buffer size of ARP event log message types.
Displays ARP statistics.
show ip arp internal event-history buffer-size
To view the current buffer size of Address Resolution Protocol (ARP) event log message types, use the show ip arp internal event-history buffer-size command in privileged EXEC mode.
show ip arp internal event-history buffer-size { all | cli | client-errors | client-event | control | errors | event | ha | ip-sync-event | lcache | lcache-errors | packet | snmp | sync-event}
Syntax Description
all Displays the current buffer size for all ARP event log message types.
cli Displays the current buffer size for the ARP CLI-related event log messages.
client-errors Displays the current buffer size for the ARP client error log messages.
client-event Displays the current buffer size for the ARP client event log messages.
control Displays the current buffer size for the ARP control event log messages.
errors Displays the current buffer size for the ARP error log messages.
event Displays the current buffer size for the ARP event log messages.
ha Displays the current buffer size for the ARP High Availability (HA)-related log messages.
ip-sync-event Displays the current buffer size for the ARP-related layer 3 (L3) routing traffic over virtual port channel (vPC) event log messages.
lcache Displays the current buffer size for the ARP lcache log messages.
lcache-errors Displays the current buffer size for the ARP lcache error log messages.
packet Displays the current buffer size for the ARP packet log messages.
snmp Displays the current buffer size for the Simple Network Management Protocol (SNMP) log messages.
sync-event Displays the current buffer size for the ARP-related Cisco Fabric Services (CFS) and multichassis EtherChannel Manager (MCECM) log messages.
Command History
Examples
The following sample output displays the buffer size for all ARP event log message types:
Device# show ip arp internal event-history buffer-size all packet buffer size = 16384 errors buffer size = 16384 event buffer size = 8388608 CFS and MCEC event buffer size = 8388608 Layer peering buffer size = 0 ARP control event buffer size = 8388608 ha buffer size = 16384 snmp buffer size = 16384 lcache buffer size = 16384 lcache error buffer size = 16384 cli buffer size = 16384 client-event buffer size = 16384 client error buffer size = 16384
Related Commands
Command
Description
Related Information
Displays ARP event log messages.
Displays ARP statistics.
show ip arp statistics
To view Address Resolution Protocol (ARP) statistics, use the show ip arp statistics command in privileged EXEC mode.
show ip arp statistics [ ethernet interface-number [ .sub-interface-number ] | loopback interface-number | mgmt management-interface-number] [ interface-all] [ vrf { vrf-name | all | default | management}]
Syntax Description
ethernet interface-number (Optional) Displays ARP statistics for the specified ethernet interface.
.sub-interface-number (Optional) Subinterface number for which ARP statistics will be displayed.
Note The period (.) needs to precede the sub-interface-number argument value. loopback interface-number (Optional) Displays ARP statistics for the specified loopback interface.
mgmt management-interface-number (Optional) Displays ARP statistics for the specified management interface.
interface-all (Optional) Displays ARP statistics for all interfaces.
vrf vrf-name (Optional) Displays ARP statistics for the specified VRF instance.
vrf all (Optional) Displays ARP statistics for all VRF instances.
vrf default (Optional) Displays ARP statistics for the default VRF instance.
vrf management (Optional) Displays ARP statistics for the management VRF instance.
Command History
Examples
The following sample output shows ARP statistics for an Ethernet subinterface:
Device# show ip arp statistics ethernet 2/1.1 ARP packet statistics for interface: Ethernet2/1.1 Sent: Total 0, Requests 0, Replies 0, Requests on L2 0, Replies on L2 0, Gratuitous 0, Tunneled 0, Dropped 0 from Server Port 0, from Fabric Port 0, fixup core 0, fixup server 0, fixup rarp 0, modified anycast glean 0 Send packet drops details: MBUF operation failed : 0 Context not yet created : 0 Invalid context : 0 Invalid ifindex : 0 Invalid SRC IP : 0 Invalid DEST IP : 0 Destination is our own IP : 0 Unattached IP : 0 Adjacency Couldn't be added : 0 Null Source IP : 0 Null Source MAC : 0 Client Enqueue Failed : 0 Dest. not reachable for proxy arp : 0 Dest. unreachable for enhanced proxy: 0 Dest. on L2 port being tracked : 0 Invalid Local proxy arp : 0 Invalid proxy arp : 0 VIP is not active : 0 Received: Total 0, Requests 0, Replies 0, Requests on L2 0, Replies on L2 0 Proxy arp 0, Local-Proxy arp 0, Enhanced Proxy arp 0, Anycast proxy Proxy arp 0, L2 Port-track Proxy arp 0, Tunneled 0, Fastpath 0, Snooped 0, Dropped 0, on Server Port 0 Received packet drops details: Appeared on a wrong interface : 0 Incorrect length : 0 Invalid protocol packet : 0 Invalid context : 0 Context not yet created : 0 Invalid layer 2 address length : 0 Invalid layer 3 address length : 0 Invalid source IP address : 0 Source IP address is our own : 0 No mem to create per intf structure : 0 Source address mismatch with subnet : 0 Directed broadcast source : 0 Invalid destination IP address : 0 Non-local destination IP address : 0 Non-active FHRP dest IP address. Learn and drop : 0 Invalid source MAC address : 0 Source MAC address is our own : 0 Received before arp initialization : 0
Related Commands
Command
Description
Related Information
Displays ARP event log messages.
Displays current buffer size of ARP event log message types.
show logging level evb
To display the system log (syslog) filter level for an Edge Virtual Bridging (EVB) session, use the show logging level evb command in privileged EXEC mode.
Command History
Usage Guidelines
Use the feature evb command to enable the EVB session. This, in turn, enables the evb keyword in the logging level command and the show logging level command on the device. Use the show logging level evb command to identify the default and the current severity levels of the EVB session.
Examples
The following is sample output from the show logging level evb command in which, for an EVB session, the default severity level is 5 and the user-defined syslog filter level is 4:
Device# show logging level evb Facility Default Severity Current Session Severity -------- ---------------- ------------------------ evb 5 4 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings) 5(notifications) 6(information) 7(debugging)
Related Commands
Command
Description
Related Information
Enables the EVB session on a device.
Enables the system log (syslog) filter level for an Edge Virtual Bridging (EVB) session
show logging logfile
To display messages in the log file that were timestamped within the configured time duration, use the show logging logfile command.
Syntax Description
start-time (Optional) Enter a start time to log messages in the format yyyy mmm dd hh:mm:ss. Use three characters for the month (mmm) field, digits for the year (yyyy) and day (dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
end-time (Optional) Enter an end time to log messages in the format yyyy mmm dd hh:mm:ss. Use three characters for the month (mmm) field, digits for the year (yyyy) and day (dd) fields, and digits separated by colons for the time (hh:mm:ss) field.
Command History
show param-list
To display all user-defined parameter lists configured in a device, use the show param-list command in privileged EXEC mode.
Syntax Description
param-list-name list-name (Optional) Displays details of a specific user-defined parameter.
show-instance (Optional) Displays details of instances created for user-defined parameters.
Command History
Usage Guidelines
The show param-list command displays all parameter lists configured in the device. To view the instances of all the parameter lists, use the show param-list show-instance command. To view the instances of a specific user-defined parameter list, use the show param-list param-list-name list-name show-instance command.
Examples
The following sample output from the show param-list command displays all parameter lists configured in the device:
Device(config)# show param-list Param List Name : param-prof1-list Name : ipaddr Type : ipaddr Name : prog1 Type : string Name : segid Type : integer Name : vlan_num Type : integer Param List Name : param-prof2-list Name : l2-segid Type : integer Name : l3-segid Type : integer Name : ipv4addr Type : ipaddr Name : ipv6addr Type : ipaddrThe following sample output from the show param-list show-instance command displays instances of all parameter lists available in the device:
Device(config)# show param-list show-instance Param List Name : param-prof1-list Name : ipaddr Type : ipaddr Name : prog1 Type : string Name : segid Type : integer Name : vlan_num Type : integer Param Instance Name : param-prof1-inst1 Name : ipaddr Value : 192.0.2.12 Name : prog1 Value : vrf-300 Name : segid Value : 6300 Name : vlan_num Value : 300 Param Instance Name : param-prof1-inst2 Name : ipaddr Value : 192.0.2.10 Name : prog1 Value : 330-vrf-2 Name : segid Value : 6301 Name : vlan_num Value : 301 Param List Name : param-prof2-list Name : l2-segid Type : integer Name : l3-segid Type : integer Name : ipv4addr Type : ipaddr Name : ipv6addr Type : ipaddr Param Instance Name : param-prof2-inst1 Name : l2-segid Value : 6305 Name : l3-segid Value : 6306 Name : ipv4addr Value : 192.0.2.5 Name : ipv6addr Value : 2001:DB8::1 Param Instance Name : param-prof2-inst2 Name : l2-segid Value : 6307 Name : l3-segid Value : 6308 Name : ipv4addr Value : 192.0.2.8 Name : ipv6addr Value : 2001:DB8::1The following sample output from the show param-list param-list-name list-name show-instance command displays instances of the param-prof1-list parameter list:
Device(config)# show param-list param-list-name param-prof1-list show-instance Param List Name : param-prof1-list Name : ipaddr Type : ipaddr Name : prog1 Type : string Name : segid Type : integer Name : vlan_num Type : integer Param Instance Name : param-prof1-inst1 Name : ipaddr Value : 192.0.2.12 Name : prog1 Value : vrf-300 Name : segid Value : 6300 Name : vlan_num Value : 300 Param Instance Name : param-prof1-inst2 Name : ipaddr Value : 192.0.2.10 Name : prog1 Value : 330-vrf-2 Name : segid Value : 6301 Name : vlan_num Value : 301
Related Commands
Command
Description
Related Information
Configures a parameter list instance.
Displays the statistical information about the running configuration of a parameter list.
Displays the statistical information about the startup configuration of a parameter list.
show running-config evb
To display the currently running configuration of an Edge Virtual Bridging (EVB) session, use the show running-config evb command in privileged EXEC mode.
Syntax Description
all (Optional) Displays the currently running configuration of an EVB session including all defaults.
Command History
Usage Guidelines
Use the feature evb command to enable the EVB session. This, in turn, enables the evb keyword in the show running-config command on the device.
Examples
The following is sample output from the show running-config evb command in an EVB session:
Device# show running-config evb !Command: show running-config evb !Time: Thu Oct 10 20:26:42 2013 version 6.2(1) feature evb logging level evb 6 evb reinit-keep-alive 21 evb resource-wait-delay 21 evb mac 0123.4567.89AB
Related Commands
Command
Description
Related Information
Enables the EVB session on a device.
show running-config fabric multicast
To display the running configurations made for the fabric multicast process, use the show running-config fabric multicast command in privileged EXEC mode.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
ip multicast fabric-pruning
Sets the multicast fabric-pruning to a desired level.
show running-config param-list
To display the configurations of a parameter list saved to the running configuration file of a configured parameter list, use the show running-config param-list command in privileged EXEC mode.
Syntax Description
Command History
Usage Guidelines
Use this command to display configured commands in the running configuration of a parameter list.
Examples
The following is sample output from the show running-config param-list command after configuring a parameter list:
! Configuring a Parameter list Device> enable Device# configure terminal Device(config)# param-list param-prof1-list Device(config-param-list)# define ipaddr ipaddr Device(config-param-list)# define prog1 string Device(config-param-list)# define segid integer Device(config-param-list)# define vlan_num integer Device(config-param-list)# instance param-prof1-inst1 Device(config-param-inst)# set ipaddr 192.0.2.1/24 Device(config-param-inst)# set prog1 vrf-300 Device(config-param-inst)# set segid 6300 Device(config-param-inst)# set vlan_num 300 Device(config-param-inst)# instance param-prof1-inst2 Device(config-param-inst)# set ipaddr 192.0.2.2/24 Device(config-param-inst)# set prog1 330-vrf-2 Device(config-param-inst)# set segid 6301 Device(config-param-inst)# set vlan_num 301 Device(config-param-inst)# exit Device(config-param-list)# exit ! Displaying the running configuration of a parameter list Device(config)# show running-config param-list param-prof1-list !Command: show running-config param-list param-prof1-list !Time: Thu Nov 28 00:37:25 2013 version 6.2(1) param-list param-prof1-list define ipaddr ipaddr define prog1 string define segid integer define vlan_num integer instance param-prof1-inst1 set ipaddr 192.0.2.1/24 set prog1 vrf-300 set segid 6300 set vlan_num 300 instance param-prof1-inst2 set ipaddr 192.0.2.2/24 set prog1 330-vrf-2 set segid 6301 set vlan_num 301 Device(config)# end
Related Commands
Command
Description
Related Information
Creates user-defined parameters for the specified parameter list.
Displays all user-defined parameter lists configured in a device.
show startup-config evb
To display the configuration of an Edge Virtual Bridging (EVB) session stored in the NVRAM that will be used at the next device startup, use the show startup-config evb command in privileged EXEC mode.
Syntax Description
Command History
Usage Guidelines
Use the feature evb command to enable the EVB session. This, in turn, enables the evb keyword in the show startup-config command on the device.
Examples
The following is sample output from the show startup-config evb command in an EVB session:
Device# show startup-config evb !Command: show startup-config evb !Time: Thu Oct 10 20:28:36 2013 !Startup config saved at: Thu Oct 10 20:24:00 2013 version 6.2(1) feature evb logging level evb 6 evb reinit-keep-alive 21 evb resource-wait-delay 21 evb mac 0123.4567.89AB
Related Commands
Command
Description
Related Information
Enables the EVB session on a device.
show startup-config param-list
To display the configurations of a parameter list saved to the startup configuration file of a configured parameter list, use the show startup-config param-list command in privileged EXEC mode.
Syntax Description
Command History
Usage Guidelines
Use this command to display configured parameters saved to the startup configuration of a parameter list.
Examples
The following is sample output from the show startup-config param-list command after configuring a parameter list:
! Configuring a Parameter list Device> enable Device# configure terminal Device(config)# param-list param-prof1-list Device(config-param-list)# define ipaddr ipaddr Device(config-param-list)# define prog1 string Device(config-param-list)# define segid integer Device(config-param-list)# define vlan_num integer Device(config-param-list)# instance param-prof1-inst1 Device(config-param-inst)# set ipaddr 192.0.2.1/24 Device(config-param-inst)# set prog1 vrf-300 Device(config-param-inst)# set segid 6300 Device(config-param-inst)# set vlan_num 300 Device(config-param-inst)# instance param-prof1-inst2 Device(config-param-inst)# set ipaddr 192.0.2.2/24 Device(config-param-inst)# set prog1 330-vrf-2 Device(config-param-inst)# set segid 6301 Device(config-param-inst)# set vlan_num 301 Device(config-param-inst)# exit Device(config-param-list)# exit Device(config)# copy running-config startup-config [########################################] 100% Copy complete. ! Displaying the startup configuration of a parameter list Device(config)# show startup-config param-list param-prof1-list !Command: show startup-config param-list param-prof1-list !Time: Thu Nov 28 02:51:51 2013 !Startup config saved at: Thu Nov 28 02:51:30 2013 version 6.2(1) param-list param-prof1-list define ipaddr ipaddr define prog1 string define segid integer define vlan_num integer instance param-prof1-inst1 set ipaddr 192.0.2.1/24 set prog1 vrf-300 set segid 6300 set vlan_num 300 instance param-prof1-inst2 set ipaddr 192.0.2.2/24 set prog1 330-vrf-2 set segid 6301 set vlan_num 301 Device(config)# end
Related Commands
Command
Description
Related Information
Creates user-defined parameters for the specified parameter list.
Displays all user-defined parameter lists configured in a device.
show tech-support fabric multicast
To display all show commands and event histories associated with fabric multicast process, use the show tech-support fabric multcast command in virtual services configuration mode.
Command History
Examples
The following is sample output from the show tech-support fabric multicast command:
Device# show tech-support fabric multicast `show running-config fabric multicast` !Command: show running-config fabric multicast !Time: Tue Oct 22 16:42:32 2013 version 6.2(1) feature fabric multicast ip multicast fabric-forwarding `show system internal sysmgr service name fabric_mcast` Service "fabric_mcast" ("fabric_mcast", 119): UUID = 0x4B3, PID = 14139, SAP = 1241 State: SRV_STATE_HANDSHAKED (entered at time Tue Oct 22 16:42:03 2013). Restart count: 2 Time of last restart: Tue Oct 22 16:42:03 2013. The service never crashed since the last reboot. Tag = N/A Plugin ID: 1 `show system internal feature-mgr feature state | include fabric_mcast` fabric_mcast 0x000004b3 enabled SUCCESS `show processes threads fabric_mcast` Thread-name Pid Stack-base Stack-size Bytes used MaxTime `show fabric multicast vrf all` Note: process currently not running `show fabric multicast globals` Note: process currently not running `show fabric multicast ipv4 mroute vrf all` Note: process currently not running `show fabric multicast ipv6 mroute vrf all` Note: process currently not running `show fabric multicast ipv4 ssm-range vrf all` Note: process currently not running `show fabric multicast ipv6 ssm-range vrf all` Note: process currently not running `show fabric multicast ipv4 rp-grange vrf all` Note: process currently not running `show fabric multicast ipv6 rp-grange vrf all` Note: process currently not running `show system internal fabric multicast ipv4 nexthop mapping` Note: process currently not running `show system internal fabric multicast ipv6 nexthop mapping` Note: process currently not running `show fabric multicast internal txlist detail vrf all` Note: process currently not running `show fabric multicast internal client-buffers` Note: process currently not running `show fabric multicast internal statistics` Note: process currently not running `show fabric multicast internal event-history errors` Note: process currently not running `show fabric multicast internal event-history msgs`system fabric core-vlans
To specify the VLAN ID or range of VLAN IDs used for core-facing interfaces, use the system fabric core-vlans command in global configuration mode. To remove the specified VLAN ID or range of VLAN IDs, use the no form of this command.
Syntax Description
vlan-id-or-range VLAN ID or range. You can specify VLAN IDs from 1 to 4094. The VLAN range is 1-5, 10 or 2-5, and 7-19.
Command History
Usage Guidelines
Use the system fabric core-vlans command to specify the set of VLANs that are used for core-facing interfaces. You can specify only those VLANs that are a subset of the fabric-reserved VLANs defined using the system fabric dynamic-vlans command. You an use the system fabric core-vlans command only after you have enabled the feature fabric forwarding command.
Note
There can be no existing VLANS in the range you specify by using the system fabric core-vlans command.Examples
The following example shows how to specify a VLAN ID or a range of VLAN IDs for a device:
Device> enable Device# configure terminal Device(config)# install feature-set fabric Device(config)# feature-set fabricpath Device(config)# feature-set fabric Device(config)# feature fabric forwarding Device(config)# system fabric dynamic-vlans 7-19 Device(config)# system fabric core-vlans 5
Related Commands
Command
Description
Related Information
Enables configuring host mobility-specific commands.
system fabric dynamic-vlans
To specify the VLAN ID or range of core and server and core or host-facing VLANs for a device, use the system fabric dynamic-vlans command in global configuration mode. To remove the specified VLAN ID or range of VLAN IDs, use the no form of this command.Syntax Description
vlan-id-or-range VLAN ID or range. You can specify VLAN IDs from 1 to 4094. The VLAN range is 1-5, 10 or 2-5, and 7-19.
Command History
Usage Guidelines
Use the system fabric dynamic-vlans command to specify the VLAN IDs or the complete range of core and server or host-facing VLANs for a device. You an use this command only after you have enabled the feature fabric forwarding command. We recommend specifying a contiguous range of VLAN IDs.
Note
There can be no existing VLANS in the range you specify by using the system fabric dynamic-vlans command.Examples
The following example shows how to specify a VLAN ID or range of VLAN IDs for a device:
Device> enable Device# configure terminal Device(config)# install feature-set fabric Device(config)# feature-set fabricpath Device(config)# feature-set fabric Device(config)# feature fabric forwarding Device(config)# system fabric dynamic-vlans 2 Device(config)# system fabric dynamic-vlans 7-19
Related Commands
Command
Description
Related Information
Enables configuring host mobility-specific commands.
topology (fabricpath-oam)
To configure a FabricPath Operation, Administration, and Maintenance (OAM) service topology identifier, use the topology command in FabricPath OAM profile configuration mode. To remove the service topology, use the no form of this command.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
traceroute fabricpath
To discover the FabricPath Operation, Administration, and Maintenance (OAM) route, use the traceroute fabricpath in privileged EXEC mode.
traceroute fabricpath switch-id switch-id [ interface interface-id ] [ vlan vlan-id | tag tag-id | dot1q dot1q-id intf-id ] [use-host-vlan] [ reply mode out-of-band { ipv4 ipv4-addr | ipv6 ipv6-addr } ] [ forward flow flow-entropy { l2 | l3 } ] [ hop hop-count ] [ topology topology-id ] verbose timeout timeout-value
Syntax Description
switch-id switch-id Sends a loopback request to the specified switch ID.
interface interface-id (Optional) Name of the egress interface for FabricPath OAM traceroute.
vlan vlan-id VLAN ID. The range is from 1 to 4094.
tag tag-id FabricPath OAM tag. The range is from 4096 to 0x00FFFFFF.
dot1q dot1q-id intf-id Specifies the FabricPath OAM 802.1Q interface ID.
Note The Dot1q option is not available on Cisco Nexus 5000 series and 6000 series switches; it is available only on the Cisco Nexus 7000 series. use-host-vlan (Optional) Specifies that only VLAN input should be used. Use this keyword when enhanced forwarding is applied and you do not want to use the translated VLAN. Use this option when you specify the ingress interface ID or when you specify the flow entropy through the profile keyword or through forward flow with the IP address of customer traffic.
reply mode out-of-band (Optional) Specifies that the FabricPath OAM reply mode is out of band. By default, FabricPath OAM is replied in band (on the FabricPath network). Use the reply mode out-of-band keyword to change the mode of reply to out of band for input IPv4 or IPv6 addresses. For routing, only the default VRF is used.
ipv4 ipv4-addr (Optional) Specifies the input IPv4 address for out-of-band reply.
ipv6 ipv6-addr (Optional) Specifies the input IPv6 address for out-of-band reply.
forward flow flow-entropy (Optional) Specifies input flow entropy (128 bytes) from actual user data traffic so that the FabricPath OAM packet takes the exact same path as the user traffic.
l2 (Optional) Specifies that the input flow entropy must be terminated until only Layer 2 entries are used. For example, MAC address, VLAN, and e-type. We recommend that you use only one string option.
l3
Note Only IPv4 and IPv6 entries can be processed. hop hop-count (Optional) Specifies the FabricPath OAM ping hop count. Range is from 1 to 64. Default is 63.
topology topology-id (Optional) Specifies the topology ID. Range is from 0 to 63. Default is 0.
verbose (Optional) Displays additional information.
timeout timeout-value (Optional) Specifies the timeout values. Range is from 1 to 36000.
Command History
Usage Guidelines
For a synchronous ping, traceroute, or mtrace, if the profile has multiple interfaces, only the first interface is selected. Use the interface keyword to overwrite the selected interface. Only one session is created.
Examples
The following example shows how to discover the route for FabricPath OAM packets.
Device# traceroute fabricpath switch-id 10 Sender handle: 3 Tracing fabricpath switch-id 10 Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' – Destination Unreachable, 'X' - unknown return code, 'V' – VLAN nonexistent, 'v' – VLAN in suspended state, 'm' - malformed request, 'C' – Cross Connect Error, 'U' – Unknown RBridge nickname, 'n' – Not AF, 'M' –MTU mismatch, 'I' – Interface not in forwarding state, 'S' – Service Tag nonexistent, 's' – Service Tag in suspended state, Type escape sequence to abort. 0 5 Rcvd on Eth10/23, Next hop RBID – 10(fwd)[1ms] ! 10 [1ms]The following example shows how to discover the route for FabricPath OAM packets with for a specific switch ID when the keyword verbose is included.
Device# traceroute fabricpath switch-id 3570 verbose Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 1 Hop Code SwitchId Interface State TotalTime PathId DwnSwId Intf State =============================================================================== 1 ! 3570 Rcvd on Eth1/3 fwd 3ms !!!!!specify customer flow entropyThe following example shows how to discover the route for FabricPath OAM packets with for a specific switch ID for forward flow.
Device# traceroute fabricpath switch-id 3570 forward flow 00112222111100112222222281000000A8903 Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 2 Hop Code SwitchId Interface State TotalTime PathId ============================================================ 1 ! 3570 Rcvd on Eth1/3 fwd 3ms !!!!Interactive traceroute with user specified layer 2 flow entropyThe following example shows interactive traceroute with user specified layer 2 flow entropy
Device# traceroute fabricpath Switch-id(1-65535) [1] 3570 Timeout in seconds [2] Extended command(y/n) [n] y OAM Profile(1-1023) [none] Interface [none] Ingress Interface [none] Forward Flow entropy [n] y Forward Flow entropy type L2/L3 [L2] Forward Flow source mac address(aaaa.bbbb.cccc) [0001.ccaa.aabb] Forward Flow destination mac address(aaaa.bbbb.cccc) [0001.ccaa.3abb] Forward Flow vlan(vlan id or none) [1] 10 Forward Flow stag(1-0xFFFFFF) [none] Forward Flow ether type [0x9100] Reverse Flow entropy [n] Reply mode out of band [n] Verbose [n] Hop count(1-63) [63] Topology id [0] Use host vlan [n] Vlan(vlan id or none) [1] 10 Control path forward request [n] Control path reverse request [n] Codes: '!' - success, 'Q' - request not sent, '.' - timeout, 'D' - Destination Unreachable, 'X' - unknown return code, 'V' - VLAN nonexistent, 'v' - VLAN in suspended state, 'm' - malformed request, 'C' - Cross Connect Error, 'U' - Unknown RBridge nickname, 'n' - Not AF, '*' - Success, Optional Tlv incomplete, 'I' - Interface not in forwarding state, 'S' - Service Tag nonexistent, 's' - Service Tag in suspended state, 'c' - Corrupted Data/Test Sender handle: 3 Hop Code SwitchId Interface State TotalTime PathId ============================================================ 1 ! 3570 Rcvd on Eth1/3 fwd 3ms
Related Commands
Command
Description
Related Information
Traces the path from a source to a destination branch for FabricPath OAM.
Tests the FabricPath OAM reachability.
use-vrf
To specify a virtual routing and forwarding instance (VRF) name for a RADIUS, TACACS+, or LDAP server group, use the use-vrf command in the appropriate command mode. To remove the VRF name, use the no form of this command.
Syntax Description
Command Modes
RADlUS server group configuration (config-radius)
TACACS+ server group configuration (config-tacacs+)
LDAP server group configuration (config-ldap)
Command History
Usage Guidelines
You can configure only one VRF instance for a server group.
Use the aaa group server radius command to enter RADIUS server group configuration mode, the aaa group server tacacs+ command to enter TACACS+ server group configuration mode, or the aaa group server ldap command to enter LDAP server group configuration mode.
If the server is not found, use the radius-server host command, the tacacs-server host command, or the ldap-server host command to configure the server.
Note
You must use the feature tacacs+ command before you configure TACACS+ or the feature ldap command before you configure LDAP.This command does not require a license.
Examples
This example shows how to specify a VRF name for a RADIUS server group:
Device# configure terminal Device(config)# aaa group server radius RadServer Device(config-radius)# use-vrf vrf1This example shows how to specify a VRF name for a TACACS+ server group:
Device(config)# feature tacacs+ Device(config)# aaa group server tacacs+ TacServer Device(config-tacacs+)# use-vrf vrf2This example shows how to remove the VRF name from a TACACS+ server group:
Device(config)# feature tacacs+ Device(config)# aaa group server tacacs+ TacServer Device(config-tacacs+)# no use-vrf vrf2This example shows how to specify a VRF name for an LDAP server group:
Device(config)# feature ldap Device(config)# aaa group server ldap LdapServer Device(config-ldap)# use-vrf vrf3This example shows how to remove the VRF name from an LDAP server group:
Device(config)# feature ldap Device(config)# aaa group server ldap LdapServer Device(config-ldap)# no use-vrf vrf3
Related Commands
Command
Description
Related Information
Creates a RADIUS server group and enters RADIUS server group configuration mode.
user-jid
To configure Jabber ID and password of the switch that is used to connect to the server, use the user-jid command in fabric database server configuration mode. To remove the Jabber ID and password, use the no form of this command.
Syntax Description
Command History
Usage Guidelines
Use the user-jid command to configure the Jabber ID and password for the switch that is used to connect to the Extensible Messaging and Presence Protocol (XMPP) server. Use this command with the fabric database type asset command to configure the external database using Extensible Markup Language (XML) and XMPP.
Examples
The following example shows how to configure a Jabber ID and password:
Device(config)# fabric database type asset Device(config-fabric-db)# server protocol xmpp host xcp-server.cisco.com Device(config-fabric-db-server)# db-jid asset-db@cisco.com key-type 1 Device(config-fabric-db-server)# user-jid leaf1@cisco.com password pwd
Related Commands
Command
Description
Related Information
Configures the Jabber ID of the database using XMPP.
Configures the external database.
vdc switch
To create or specify a virtual device context (VDC) for a switch and enter VDC configuration mode, use the vdc switch command.
Syntax Description
id 1 (Optional) Forces the VDC into a specific ID 1.
type storage (Optional) Specifies a VDC for storage.
Command History
Release Modification 7.0(0)N1(1)
This command was introduced.
Usage Guidelines
You can use the vdc switch command only with the specific Virtual Device Context (VDC) identifier value of 1. The VDC type storage cannot be the default VDC, and it can be only one of the VDCs. You cannot have two type storage VDCs on the device. When you create or specify a VDC, the Cisco NX-OS software allocates the internal resources for the VDC. This process can take a few minutes to complete depending on the amount of internal resource you have requested for the VDC.
Examples
The following example shows how to specify a Virtual Device Context (VDC) for a switch:
Device> enable Device# configure terminal Device (config)# vdc switch Device(config-vdc)# endThe following example shows how to force a VDC into a specific ID <1>:
Device> enable Device# configure terminal Device (config)# vdc switch id 1 Device(config-vdc)# endThe following example shows how to force a VDC into a specific ID <1>:
Device> enable Device# configure terminal Device(config)# vdc switch type storage Device(config)# endverify profile
To verify a configured profile, use the verify profile command in parameter instance configuration mode.
Syntax Description
Command History
Usage Guidelines
If the profile configurations are incorrect, the verify profile command displays an error.
Examples
The following example shows how to verify a profile using the verify profile command after configuring a profile:
! Configuring a profile Device> enable Device# configure terminal Device(config)# configure profile Profile1 Device(config-profile)# bridge-domain 10 Device(config-profile-bdomain)# vlan 1-5 Device(config-profile-vlan)# end ! Verifying a configured profile Device# configure terminal Device(config)# param-list Marksheet Device(config-param-list)# instance Instance1 Device(config-param-inst)# verify profile Profile1 Device(config-param-inst)# end
Related Commands
Command
Description
Related Information
Configures a profile.
Configures a parameter list instance.
Displays details of created and applied profiles.
vlan (fabricpath-oam)
To configure the FabricPath Operation, Maintenance, and Administration (OAM) VLAN, use the vlan command in FabricPath OAM profile configuration mode. To remove the VLAN configuration, use the no form of this command.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Configures a FabricPath OAM profile.
vlan access-map
To create a new VLAN access-map entry or to configure an existing VLAN access-map entry on a device, use the vlan access-map command in global configuration mode. To remove a VLAN access-map entry, use the no form of this command.
Syntax Description
map-name Name of the VLAN access map that you want to create or configure. The map-name argument can be up to 64 alphanumeric, case-sensitive characters.
Command History
Release Modification —
This command was introduced in a release earlier than Cisco NX-OS Release 7.0(0)N1(1).
7.0(0)N1(1)
This command was modified. The sequence-number argument was removed.
Usage Guidelines
Each VLAN access-map entry can include one action command and one or more match commands. Use the statistics per-entry command to configure the device to record statistics for a VLAN access-map entry.
Use the vlan access-map command to enter the access-map configuration mode (config-access-map) to enable receiving of packets on any port on the switch. PowerOn Auto Provisioning (POAP) uses access control 3ists (ACL) to selectively receive packets. All line cards supported by N7K support Layer 2 ports. Therefore, for the purpose of PoAP, all ports are configured as Layer 2 ports. To simplify configuration of ACLs, a common VLAN is allowed on all the ports and the VLAN ACL (VACL) configured on this common VLAN.
The VACL is configured in two phases. Initially, the VACL will be configured to permit just the DHCP requests and responses and redirect these to the supervisor. All other packets will be dropped. The permit rules match DHCP requests and responses. They make use of the fact that DHCP uses UDP and fixed L4 port numbers for the server (67) and client (68). Once the PoAP process receives the appropriate DHCP packets and an IP address is assigned to the switch, the VACL will be modified to permit all packets destined to the newly assigned IP address.
This command does not require a license.
Examples
The following example shows how to enable and configure a VLAN access-map entry:
Device> enable Device# configure terminal Device(config)# ip access-list testacl Device(config-acl)# 20 permit udp any any eq 67 Device(config-acl)# 30 permit udp any any eq 68 Device(config-acl)# 40 permit udp any eq 67 any Device(config-acl)# 50 permit udp any eq 68 any Device(config-acl)# 60 deny ip any any Device(config-acl)# exit Device(config)# vlan access-map poapvacl Device(config-access-map)# match ip address testacl Device(config-access-map)# end
Related Commands
Command
Description
Related Information
Applies a VLAN access map to one or more VLANs.
vlan filter
To apply a VLAN access map to one or more VLANs, use the vlan filter command in global configuration mode. To unapply a VLAN access map, use the no form of this command.
Syntax Description
map-name Name of the VLAN access map that you want to create or configure.
vlan-list vlan-list Specifies the ID of one or more VLANs that the VLAN access map filters. Valid VLAN IDs are from 1 to 3967.
Use a hyphen (-) to separate the beginning and ending IDs of a range of VLAN IDs; for example, use 70-100. Use a comma (,) to separate individual VLAN IDs and ranges of VLAN IDs; for example, use 20,70-100,142.
Note When you use the no form of this command, the VLAN-list argument is optional. If you omit this argument, the device removes the access map from all VLANs where the access map is applied. Command History
Release Modification —
This command was introduced in a release earlier than Cisco NX-OS Release 7.0(0)N1(1).
Usage Guidelines
You can apply a VLAN access map to one or more VLANs. You can apply only one VLAN access map to a VLAN.
The no form of this command enables you to unapply a VLAN access map from all or part of the VLAN list that you specified when you applied the access map. To unapply an access map from all VLANs where it is applied, you can omit the vlan-list argument. To unapply an access map from a subset of the VLANs where it is currently applied, use the vlan-list argument to specify the VLANs where the access map should be removed.
This command does not require a license.
Examples
The following example shows how to specify access control for packets on a VLAN access control list (VACL):
Device> enable Device# configure terminal Device(config)# ip access-list testacl Device(config-acl)# 20 permit udp any any eq 67 Device(config-acl)# 30 permit udp any any eq 68 Device(config-acl)# 40 permit udp any eq 67 any Device(config-acl)# 50 permit udp any eq 68 any Device(config-acl)# 60 deny ip any any Device(config-acl)# exit Device(config)# vlan access-map poapvacl Device(config-access-map)# match ip address testacl Device(config-access-map)# exit Device(config)# vlan filter poapvacl vlan-list 1 Device(config)# end
Related Commands
Command
Description
Related Information
Creates and configures VLAN access-map entry on a device.
vn-segment
To configure the virtual network (VN) segment ID of the virtual LAN (VLAN), use the vn-segment command in VLAN configuration mode. To remove a configured VN segment ID, use the no form of this command.
Syntax Description
Command History
Related Commands
Command
Description
Related Information
Enables a VLAN-based VN segment on a device.
vni
To configure the virtual network identifier (VNI), use the vni command in global configuration or VRF configuration mode. To remove the VNI, use the no form of this command.
Syntax Description
vni-id (Optional) Configures the unique identifier. The range is from 4096 to 16773119.
- vni-id
Note You can specify a single ID or a range. For example, 4099, 5000-5005. Command Modes
For spine devices—Global configuration (config)
For leaf devices—VRF configuration (config-vrf)
Command History
Related Commands
Command
Description
Related Information
Enables a VLAN-based VN segment on a device.
Configures the segment identifier of the VLAN.
