Channel Associated Signaling (CAS) is the transmission of signaling information within the voice channel. CAS signaling often is referred to as robbed-bit signaling because user bandwidth is being robbed by the network for other purposes.
Design


Design TechNotes

(All Telephony Signaling Design TechNotes)


(All Telephony Signaling Design TechNotes)

Answer and Disconnect Supervision on T1 Digital Trunks

Cisco CallManager: Understanding Direct-Inward-Dial (DID)

Country Options Configuration for E1R2 Signaling

E1 R2 Signaling Theory

Understand the NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Module

Understanding How Digital T1 CAS (Robbed Bit Signaling) Works in IOS Gateways

Understanding MGCP Interactions with Cisco CallManager

Voice Network Signaling and Control


Cisco CallManager: Understanding Direct-Inward-Dial (DID)


Country Options Configuration for E1R2 Signaling

E1 R2 Signaling Theory

Understand the NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Module

Understanding How Digital T1 CAS (Robbed Bit Signaling) Works in IOS Gateways

Understanding MGCP Interactions with Cisco CallManager


Voice Network Signaling and Control

Configure


Configuration Examples and TechNotes

(All Telephony Signaling Configuration Examples and TechNotes)


(All Telephony Signaling Configuration Examples and TechNotes)

Configuring and Troubleshooting T1 CAS Signaling

Country Options Configuration for E1R2 Signaling

Distinguishing Modem and Voice Calls on Cisco AS5xxx Gateways

E1 R2 Customization with the cas-custom Command

E1 R2 Signaling Configuration and Troubleshooting

Integrate the Cisco IOS Gateway to the MX/Alliance Turret via T1-CAS

Integrating PBXs into VoIP Networks Using the TDM Cross Connect Feature

MGCP with Digital CAS and Cisco CallManager Configuration Example

VoIP with Channel Associated Signaling (CAS)


Country Options Configuration for E1R2 Signaling

Distinguishing Modem and Voice Calls on Cisco AS5xxx Gateways


E1 R2 Customization with the cas-custom Command

E1 R2 Signaling Configuration and Troubleshooting

Integrate the Cisco IOS Gateway to the MX/Alliance Turret via T1-CAS

Integrating PBXs into VoIP Networks Using the TDM Cross Connect Feature

MGCP with Digital CAS and Cisco CallManager Configuration Example


VoIP with Channel Associated Signaling (CAS)

Maintain and Operate


Troubleshoot and Alerts


Troubleshooting TechNotes

(All Telephony Signaling Troubleshooting TechNotes)


(All Telephony Signaling Troubleshooting TechNotes)

Answer and Disconnect Supervision on T1 Digital Trunks

Cisco CallManager: Understanding Direct-Inward-Dial (DID)

Country Options Configuration for E1R2 Signaling

Distinguishing Modem and Voice Calls on Cisco AS5xxx Gateways

E1 R2 Customization with the cas-custom Command

E1 R2 Signaling Theory

Identify, Supersede, and Maintain Compatible DSP Firmware Version Levels on C5510 DSPs

Integrate the Cisco IOS Gateway to the MX/Alliance Turret via T1-CAS

T1/E1 Loopback Testing and Troubleshooting

Toll-Fraud Prevention Feature in IOS Release 15.1(2)T

Troubleshooting EM_PARK Issues for E&M Digital CAS Signaling

Troubleshooting the DSP on NM-HDV for Cisco 2600/3600/VG200 Series Routers

Understand the NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Module

Understanding How Digital T1 CAS (Robbed Bit Signaling) Works in IOS Gateways

Understanding MGCP Interactions with Cisco CallManager

Voice Network Signaling and Control


Cisco CallManager: Understanding Direct-Inward-Dial (DID)


Country Options Configuration for E1R2 Signaling

Distinguishing Modem and Voice Calls on Cisco AS5xxx Gateways


E1 R2 Customization with the cas-custom Command

E1 R2 Signaling Theory

Identify, Supersede, and Maintain Compatible DSP Firmware Version Levels on C5510 DSPs


Integrate the Cisco IOS Gateway to the MX/Alliance Turret via T1-CAS

T1/E1 Loopback Testing and Troubleshooting


Toll-Fraud Prevention Feature in IOS Release 15.1(2)T


Troubleshooting EM_PARK Issues for E&M Digital CAS Signaling

Troubleshooting the DSP on NM-HDV for Cisco 2600/3600/VG200 Series Routers

Understand the NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Module

Understanding How Digital T1 CAS (Robbed Bit Signaling) Works in IOS Gateways

Understanding MGCP Interactions with Cisco CallManager


Voice Network Signaling and Control
