Cisco Small Business Network Storage Systems

If there is a problem with the NSS and the configuration interface is not accessible, you might need to reset the network settings.

Resetting the Network Settings of the NSS

Step 1:
Shut down and power off the system.

Step 2:
Press and hold the Reset button on the front panel of the chassis then apply power to the system.

Step 3:
Wait until you see the Power LED on the front panel to flash yellow rapidly then release the Reset button.

Note: The following will be reset to their default settings:

• Link Addressing: DHCP
• Link Bonding Mode: Active Backup
• NSS Hostname: nas<MAC address of primary link> For example, "nas0123456789ab"
• Administrator Password: admin
• Network Filters: cleared
• Network Default Policy: Accept All
• MTU Size: 1500