Document ID: 109714
Updated: Feb 26, 2009
Contents
Introduction
After you create a category in the Cisco Unified Web and E-Mail Interaction Manager 4.2(5) for the Cisco Unified Contact Center Express, the new category does not show up either in the List or Tree pane until a restart of the Cisco Interaction Manager (CIM). This document discusses how to troubleshoot this issue.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Components Used
The information in this document is based on the Cisco Unified Web and E-Mail Interaction Manager version 4.2(5).
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Problem
Log in to the default partition (partition 1) on a newly installed and/or upgraded Cisco Unified Web and E-Mail Interaction Manager 4.2(5) system, with a partition administrator account. Go to Department > any department > Classifications > Categories and click New. Enter the details and save the newly created category. The new category does not show up in either the List or Tree pane.
This issue is documented by Cisco Bug ID CSCsy00673 (registered customers only)
Solution
Use this solution to resolve the problem.
Go to \CIM\eService\config\egpl_cachedefaultconfig.properties, open the properties file, and change the values as given:
from: distribute = true to: distribute = false
Restart the CIM after you change the setting and try to recreate the category.
Related Information
Open a Support Case 
(Requires a Cisco Service Contract.)
Related Cisco Support Community Discussions
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.