ATM Switch Router Software Configuration Guide, 12.1(6)EY - Preface [Cisco Catalyst 8500 Series Multiservice Switch Routers]

Preface
Audience
New and Changed Information
Organization
Related Documentation
Document Conventions
Obtaining Documentation

World Wide Web
Documentation CD-ROM
Ordering Documentation
Documentation Feedback

Obtaining Technical Assistance

Cisco.com
Technical Assistance Center

Contacting TAC by Using the Cisco TAC Website
Contacting TAC by Telephone

Preface

This preface describes the audience, organization, and conventions for the ATM Switch Router Software Configuration Guide, and provides information on how to obtain related documentation.

Audience

This publication is intended for experienced network administrators who are responsible for configuring and maintaining the Layer 3 enabled ATM switch router.

New and Changed Information

Feature

Description

Chapter or Section

ITT Enhancements

The Input Translation Table Management feature adds three enhancements which help better utilize ITT resources by:

· Minimizing fragmentation

· Shrinking ITT blocks

· Viewing used, and unused ITT blocks.

Chapter 6, in the section "Input Translation Table Management" section.

Organization

The major sections of this guide are as follows:

Chapter	Title	Description
Chapter 1	Product Overview	Provides an overview of the ATM switch router features and functions.
Chapter 2	Understanding the User Interface	Describes how to access the commands available in each command mode and explains the primary uses for each command mode.
Chapter 3	Initially Configuring the ATM Switch Router	Describes the initial configuration of the ATM switch router.
Chapter 4	Configuring System Management Functions	Describes the tasks to manage the general system features, such as access control and basic management of the ATM switch router.
Chapter 5	Configuring ATM Network Interfaces	Describes how to configure typical ATM network interfaces after autoconfiguration has established the default network connections.
Chapter 6	Configuring Virtual Connections	Describes how to configure virtual connections after autoconfiguration has determined the default virtual connections.
Chapter 7	Configuring Operation, Administration, and Maintenance	Describes the OAM fault management and performance management functions of the ATM switch router.
Chapter 8	Configuring Resource Management	Describes how to configure the management of switch, interface, and connection resources.
Chapter 9	Configuring ILMI	Describes the Integrated Local Management Interface (ILMI) protocol implementation and configuration.
Chapter 10	Configuring ATM Routing and PNNI	Describes how to configure the Interim Interswitch Signaling Protocol (IISP) and the Private Network-Network Interface (PNNI) protocol.
Chapter 11	Using Access Control	Describes how to configure and maintain access control lists.
Chapter 12	Configuring IP over ATM	Describes how to configure the Ethernet port for IP over ATM connections.
Chapter 13	Configuring LAN Emulation	Describes how to configure LAN emulation on the ATM switch router.
Chapter 14	Configuring ATM Accounting and ATM RMON	Describes the ATM accounting and ATM Remote Monitoring features and their configuration.
Chapter 15	Configuring Tag Switching	Describes how to configure tag switching on the ATM switch router.
Chapter 16	Configuring Signalling Features	Describes how to configure common and specialized signalling features.
Chapter 17	Configuring Interfaces	Describes the steps required to configure the individual port adapter and interface module.
Chapter 18	Configuring Circuit Emulation Services	Describes the steps to configure the Circuit Emulation Services port adapter modules.
Chapter 19	Configuring Frame Relay to ATM Interworking Port Adapter Interfaces	Describes the steps to configure the Frame Relay to ATM interworking port adapter modules.
Chapter 20	Configuring IMA Port Adapter Interfaces	Describes the steps to configure inverse multiplexing over ATM port adapter interfaces.
Chapter 21	Configuring ATM Router Module Interfaces	Describes the steps to integrate Layer 3 routing and ATM switching with the ATM router module.
Chapter 22	Managing Configuration Files, System Images, and Functional Images	Includes procedures for updating and maintaining the ATM switch router software and configurations.
Appendix A	PNNI Migration Examples	Provides examples for migrating from a flat PNNI topology to a hierarchical topology.
Appendix B	Acronyms	Lists the acronyms used in this guide.

Document Conventions

Unless otherwise noted, all information in this document is relevant to the Catalyst 8540 MSR, Catalyst 8510 MSR and LightStream 1010 ATM switch routers. Platform specific sections have the platform name appended to the title in parentheses. For example, the "Configuring Redundancy and Enhanced High System Availability (Catalyst 8540 MSR)" section is only relevant to the Catalyst 8540 MSR ATM switch router.

This document uses the following conventions:

Convention	Description
boldface font	Commands and keywords are in boldface.
italic font	Arguments for which you supply values are in italics.
[ ]	Elements in square brackets are optional.
{x \| y \| z}	Alternative keywords are grouped in braces and separated by vertical bars.
[x \| y \| z]	Optional alternative keywords are grouped in brackets and separated by vertical bars.
string	A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
`screen` font	Terminal sessions and information the system displays are in `screen` font.
boldface screen font	Information you must enter is in boldface screen font.
italic screen font	Arguments for which you supply values are in italic screen font.
	`This pointer highlights an important line of text in an example.`
^	The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.
< >	Nonprinting characters, such as passwords are in angle brackets.

Notes use the following conventions:

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.

Cautions use the following conventions:

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Cisco documentation is available in the following ways:

Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace:

http://www.cisco.com/public/ordsum.html

Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:

http://www.cisco.com/go/subscription

Nonregistered CCO users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by calling 800 553-NETS(6387).

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.

To access Cisco.com, go to the following website:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.

Contacting TAC by Using the Cisco TAC Website

If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:

http://www.cisco.com/tac

P3 and P4 level problems are defined as follows:

P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
P4—You need information or assistance on Cisco product capabilities, product installation, or basic product configuration.

In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.

To register for Cisco.com, go to the following website:

http://www.cisco.com/register/

If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:

http://www.cisco.com/tac/caseopen

Contacting TAC by Telephone

If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

P1 and P2 level problems are defined as follows:

P1—Your production network is down, causing a critical impact to business operations if service is not restored quickly. No workaround is available.
P2—Your production network is severely degraded, affecting significant aspects of your business operations. No workaround is available.

Table of Contents