Product Bulletin No. 1921
Cisco Catalyst Operating System Software
Version 7.4(1) for the Cisco Catalyst 4000 Family Switches
The Cisco Catalyst® Operating System (CatOS) software version 7.4(1) for the Cisco Catalyst 4000 Family Supervisor Engine supports Cisco Catalyst 4000 Family switches including the Cisco Catalyst 2948G, 4912G, and 2980G-A switches.
Hardware Supported
The Cisco CatOS software version 7.4(1) supports all chassis and cards previously supported under the Cisco CatOS for the Cisco Catalyst 4000 Family Supervisor Engine. In addition, CatOS version 7.4(1) supports the hardware for the Cisco Catalyst Supervisor II Engine listed below.
Table 1: Cisco Catalyst Supervisor II Engine Hardware Supported by CatOS Version 7.4(1)
Chassis | Description |
---|---|
WS-C4503 |
Cisco Catalyst 4500 Series 3-slot chassis |
WS-C4506 |
Cisco Catalyst 4500 Series 6-slot chassis |
Power Supplies | |
PWR-C45-1000AC |
Cisco Catalyst 4500 1000 watt AC power supply (data only) |
PWR-C45-2800ACV |
Cisco Catalyst 4500 2800 watt AC power supply (with integrated voice) |
Orderable Software Images
Table 2 lists the software versions and applicable ordering information for the Cisco Catalyst 4000 Family Supervisor Engine software.
Caution: Always back up the switch configuration file before you upgrade or downgrade the switch software to avoid losing the configuration stored in nonvolatile RAM (NVRAM). When you downgrade switch software, you lose your configuration. Use the write network command or the copy config tftp command to back up your configuration to a Trivial File Transfer Protocol (TFTP) server. Use the copy config flash command to back up the configuration to a Flash memory device.
Table 2: Software Ordering Information
Product Number | Description | Image |
---|---|---|
SC4K-SUPK8-7.4.1 SC4K-SUPK8-7.4.1= |
Cisco Catalyst 4000 Supervisor Flash image, version 7.4.1 Spare |
cat4000-k8 |
SC4K-SCVK8-7.4.2 SC4K-SCVK8-7.4.2= |
Cisco Catalyst 4000 CiscoView image, version 7.4.2 Spare |
cat4000-cv |
SC4K-SUPK9-7.4.1 SC4K-SUPK9-7.4.1= |
Cisco Catalyst 4000 Supervisor Flash image with SSH, version 7.4.1 Spare |
cat4000-k9 |
For more detailed information, refer to the Cisco Catalyst 4000 Family release notes at:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/index.htm.
Also, review the Cisco Catalyst 4000 Family documentation at:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/index.htm.