|
Replacement
|
PA-MC-T3
|
Advantages
|
• Provides full channelization including DSOs, NxDS0, and T1
• Reduced spare requirements as same product works across 7200 series routers, 7500 series routers, and Flexwan Module for Catalyst® 6500
• Higher performance
• Smaller footprint through single-wide PA
|
|
PA-CT3/4T1
|
CT3IP-40
|
CT3IP-50
|
PA-MC-T3
|
7200
|
11.1(5)CC, 11.1(16)CA, 12.0(1)T, 12.0(1), 12.0(5)S, 12.1(1)E, 12.1(1)
|
N/A
|
N/A
|
11.1(22)CC, 12.0(2)XE, 12.0(2)XE2, 12.0(3)T, 12.0(5)S, 12.1(1)E, 12.1(1)
|
7500
|
N/A
|
11.1(8)CA, 11.1(17)CC, 11.2(1)BC, 11.2(1)F, 11.2(7)P, 11.3(1)T, 11.3(1), 12.0(1)T, 12.0(1), 12.0(2)XE3, 12.0(3)T, 12.0(4)XE1, 12.0(5)S, 12.0(5)XE5, 12.0(7)T, 12.0(7)XE1, 12.1(1)E, 12.1(1)
|
11.1(14)CA, 11.1(17)CC, 12.0(1)T, 12.0(1), 12.0(5)S, 12.1(1)E, 12.1(1)
|
11.1(20)CC, 12.0(2)XE, 12.0(3)T, 12.0(5)S, 12.1(1)E, 12.1(1)
|
Support Programs
End of Life Schedule
End-of-Sale Announcement
|
July 24, 2000
|
End of Sale: PA-CT3/4T1
|
September 30, 2000
This product no longer can be ordered after the date specified.
|
End of Shipment: PA-CT3/4T1
|
Approximately October, 2000 (depending on size of final orders and resultant lead times)
|
End of Software Maintenance
|
End of software maintenance is not being announced at this time.
|
End of Hardware Maintenance
|
October 1, 2005
After October 1, 2005, no hardware repairs or exchanges will be available for the PA-CT3/4T1.
|
Product Bulletin - No. 1176
End of Sale (EoS): PA-CT3/4T1, CT3IP-40, CT3IP-50
Introduction
Cisco Systems is announcing the end of sale (EoS) for the Channelized T3 Dual-Wide Port Adapter; Channelized T3 Interface Processor 40 and the Channelized Interface Processor 50, effective September 30, 2000. Severe component availability issues due to the age of these port adapters have necessitated this action. The PA-CT3/4T1, CT3IP-40, and CT3IP-50 remain available for ordering in systems and as spares until September 30, 2000.
This action does not affect other port adapters.
Product Substitution
Replacement
|
PA-MC-T3
|
Advantages
|
• Provides full channelization including DSOs, NxDS0, and T1
• Reduced spare requirements as same product works across 7200 series routers, 7500 series routers, and Flexwan Module for Catalyst® 6500
• Higher performance
• Smaller footprint through single-wide PA
|
|
PA-CT3/4T1
|
CT3IP-40
|
CT3IP-50
|
PA-MC-T3
|
7200
|
11.1(5)CC, 11.1(16)CA, 12.0(1)T, 12.0(1), 12.0(5)S, 12.1(1)E, 12.1(1)
|
N/A
|
N/A
|
11.1(22)CC, 12.0(2)XE, 12.0(2)XE2, 12.0(3)T, 12.0(5)S, 12.1(1)E, 12.1(1)
|
7500
|
N/A
|
11.1(8)CA, 11.1(17)CC, 11.2(1)BC, 11.2(1)F, 11.2(7)P, 11.3(1)T, 11.3(1), 12.0(1)T, 12.0(1), 12.0(2)XE3, 12.0(3)T, 12.0(4)XE1, 12.0(5)S, 12.0(5)XE5, 12.0(7)T, 12.0(7)XE1, 12.1(1)E, 12.1(1)
|
11.1(14)CA, 11.1(17)CC, 12.0(1)T, 12.0(1), 12.0(5)S, 12.1(1)E, 12.1(1)
|
11.1(20)CC, 12.0(2)XE, 12.0(3)T, 12.0(5)S, 12.1(1)E, 12.1(1)
|
Support Programs
End of sale refers to the time when certain products are no longer available for new purchases. It does not apply to the service and support programs for those products. Cisco will continue to support the PA-CT3/4T1, CT3IP-40, and CT3IP-50 after EoS through the SMARTnet™ and comprehensive maintenance programs. Customers with either of these service contracts are entitled to free software updates, 24-hour phone support through the Technical Assistance Center, and advance replaced hardware for repairs. Comprehensive maintenance customers also receive onsite service. Customers who do not have a maintenance contract can purchase software updates and hardware repair services from Cisco to meet specific requirements rather than full-service coverage. Cisco is committed to providing software support for a minimum of two years and providing hardware support for five years after the EoS date.
End of Life Schedule
End-of-Sale Announcement
|
July 24, 2000
|
End of Sale: PA-CT3/4T1
|
September 30, 2000
This product no longer can be ordered after the date specified.
|
End of Shipment: PA-CT3/4T1
|
Approximately October, 2000 (depending on size of final orders and resultant lead times)
|
End of Software Maintenance
|
End of software maintenance is not being announced at this time.
|
End of Hardware Maintenance
|
October 1, 2005
After October 1, 2005, no hardware repairs or exchanges will be available for the PA-CT3/4T1.
|
For additional information, contact Matt Laherty, Product Manager, at mlaherty@cisco.com.
|
|
|