CDDI/FDDI SBus Adapter User Guide
Workgroup SBus Adapter Technical Specifications
Download this chapter
Workgroup SBus Adapter Technical SpecificationsWorkgroup SBus Adapter Technical Specifications
 Feedback

Table of Contents

SBus Adapter Technical Specifications

SBus Adapter Technical Specifications

Table A-1 provides a detailed description of the CDDI/FDDI SBus single and dual attachment adapter specifications.


Table  A-1: CDDI/FDDI SBus Adapter Specifications
FDDI SBus
Adapter 		CDDI SBus
Adapter
Dimensions (H x W x D) Single attachment adapter: 0.75 x 3.3 x 5.78"
(1.9 x 8.4 x 14.6 cm)

Dual attachment adapter:
0.75 x 6.72 x 5.78"
(1.9 x 17.07 x 14.6 cm)

 Single attachment adapter:
0.75 x 3.3 x 5.78"
(1.9 x 8.4 x 14.6 cm)

Dual attachment adapter:
0.75 x 6.72 x 5.78"
(1.9 x 17.07 x 14.6 cm)
Power requirements +5V @ 1.8A (maximum)
+12V @ 30 mA (maximum)		 +5 V @ 1.5A (maximum)
+12 V @ 30 mA (maximum)
Power dissipation 9.4 watts (W) (maximum)

Single attachment adapter:
5W (typ)

Dual attachment adapter:
6W (typ)

 7.9W (maximum)

Single attachment adapter:
4W (typ)

Dual attachment adapter:
5W (typ)
Environmental conditions:
Operating temperature
Storage temperature
Relative humidity		 32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)
10 to 90% (noncondensing)		 32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)
10 to 90% (noncondensing)
EMI certifications FCC Class B (47 CFR, Part 15)
CISPR Class B
VDE Class B
EN55022 Class B
VCCI Class 2
CE Mark		 FCC Class A (47 CFR, Part 15)
CISPR Class A
VDE Class B
EN55022 Class A
VCCI Class 1
CE Mark
Network connector MIC RJ-45
Station-to-station cabling Up to 2 kilometers of either 62.5/125-micron or 50/125-micron multimode fiber Category 5 UTP: up to 100 meters
IBM Type 1 STP: up to 100 meters1
Faceplate indicators Status, ringop Status, ringop
SBus compliance SBus A.2 specification SBus A.2 specification

1 Defined in EIA/TIA 568.