 Feedback
|
Table Of Contents
Release Notes for Cisco Unified Personal Communicator Release 8.5
Network Ports Used by Cisco Unified Personal Communicator
Virtual Desktop Infrastructure (VDI) Support
General Platform Requirement Notes
Codecs for Use with Cisco Unified Personal Communicator
Cisco Unified IP Phone Requirements
Installing Cisco Systems Network Protocol
Installing Cisco Unified Personal Communicator Using MSI
Installing the Microsoft Visual C++ 2005 Redistributable Package
Using Translation Patterns Instead of Application Dialing Rules
Removing Cisco Unified Video Advantage
Cisco Unified Personal Communicator Deployment
Installing Security Certificates on Client Computers for Client Services Framework (CSF)
Enabling Availability Status for Microsoft Office Users
Automatic Tethered Phone Selection
Preferred Audio and Video Device Selection
Enhanced Directory Integration
Forced Authorization Codes Support
Cisco VPN Client and CAST video
Cisco VT Camera II Support on Windows 7 64-bit
Enhanced Directory Integration Functionality and Cisco Unified Personal Communicator
Cisco Unified Communications Manager 6.1(3) and Conference Participant Lists
Other Party Hears Cuts or Clips in Audio on a Call
Voice Messages Show a Duration of Zero
Adding an Audio Call to a Video Call Results in an Audio Call
Users of Cisco Unified IP Phone 8961, 6900 Series, and 9900 Series Models Cannot Control Desk Phone
JTAPI Error When a Call Is Placed
Limitation with Shared Lines When Deploying with Cisco Unified SRST
How Cisco Unified Personal Communicator Determines the Audio Codec to Use on a Call
Chat Slow with Wireless Connection from Some Laptops
16-Bit Color Quality Might Cause High CPU Usage
Availability Status Not Displayed in Microsoft Office
Uninstalling Microsoft Office Communicator
Overriding the Default Language and Regional Settings Used by Cisco Unified Personal Communicator
Errors Displayed After Signing In to a Different Cisco Unified Presence Server
Long Meeting Passwords in Cisco WebEx Cause Problems
Additions to Deployment Documentation
Configuring Mailstore Server Names and Addresses on Cisco Unified Presence for Secure Voicemail
Before You Start Cisco Unified Personal Communicator as a Desktop Agent
Factors That Affect the Video Capability of Users
Determining the Bit Rate Required for a Particular Video Capability
Configuring the Bit Rate Capability for Cisco Unified Personal Communicator
How Cisco Unified Client Services Framework Determines the Video Capability of Your Computer
Limiting of Usage of Bandwidth by Users
About Tuning Computers for Maximum Video Performance
Video Conversations with Multiple Displays
Some Web Cameras Start When Users Sign In
Poor Sound Quality on the Tandberg PrecisionHD USB Camera on Windows 7
Tandberg PrecisionHD Camera Requires Windows Security Update
Obtaining Documentation, Obtaining Support, and Security Guidelines
Release Notes for Cisco Unified Personal Communicator Release 8.5
April 2, 2012These release notes describe the new features and caveats for Cisco Unified Personal Communicator Release 8.5(6).
To view the release notes for previous versions of Cisco Unified Personal Communicator, go to http://www.cisco.com/en/US/products/ps6844/prod_release_notes_list.html.
For details about downloading the software, see Installation Notes.
Contents
•
About Audio and Video Quality
•
Introduction
These release notes describe requirements, restrictions, and caveats for Cisco Unified Personal Communicator Release 8.5(1), Release 8.5(2), Release 8.5(3), Release 8.5(4), Release 8.5(5), and Release 8.5(6). These release notes are updated for every maintenance release but not for patches or hotfixes.
Cisco Unified Personal Communicator uses Cisco Unified Client Services Framework, which provides Cisco telephony services and next-generation media services for Cisco Unified Personal Communicator.
Before you install Cisco Unified Personal Communicator, review this document for issues that might affect your system. For a list of the open caveats, see Open Caveats.
System Requirements
•
Network Requirements
For Cisco Unified Personal Communicator to successfully operate as an endpoint, your network must meet the requirements in the following sections:
•
Voice over IP
You must configure voice over IP (VoIP) on your Cisco routers and gateways.
Network Ports Used by Cisco Unified Personal Communicator
Cisco Unified Personal Communicator expects inbound and outbound traffic to occur on particular ports through particular protocols.
Cisco Unified Personal Communicator allows the operating system to choose a port for the origination of all types of traffic, except for Real-Time Transport Protocol (RTP). Cisco Unified Personal Communicator selects a port to send and receive RTP traffic. The application uses port 16384 as the base port for the initial stream and uses higher port numbers for additional RTP and RTCP streams. For a particular stream, Cisco Unified Personal Communicator always uses the same port in the range to send and receive.
Table 1 and Table 2 describe the ports using by Cisco Unified Client Services Framework for inbound and outbound traffic. Table 3 describes the ports used by Cisco Unified Personal Communicator.
Table 1 Ports Used for Inbound Traffic by Cisco Unified Client Services Framework
16384-32766
UDP
Receives Real-Time Transport Protocol (RTP) media streams for audio and video. These ports are configured in Cisco Unified Communications Manager. For more information about device configuration files, see the Cisco Unified Communications Manager System Guide:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
Note
Configurations that Use Network Ports
You can use the network port information for these configurations:
•
To avoid blocking availability status information, verify that firewalls on the client computer or on the network are configured to allow Cisco Unified Personal Communicator traffic.
Configuring Network Ports on Client Computers
When you run Cisco Unified Personal Communicator on Windows for the first time after installation, the firewall asks whether you want to block the application or not. Select Unblock.
Troubleshooting Tips
If users experience problems with presence, phone mode switching, or instant messages, the firewall might be denying connections despite the previous allowed setting. Restart Cisco Unified Personal Communicator. If this does not resolve the issue, return to the Firewall settings, remove Cisco Unified Personal Communicator, and add it again to the list of applications that allow incoming connections.
Routing Access Control Lists
You must configure switching and routing ACLs so that Cisco Unified Personal Communicator can communicate with servers and endpoints that might be connected to the voice VLAN. The voice VLAN is the VLAN that carries voice traffic.
By using ACLs, you can permit Cisco Unified Personal Communicator to connect to each server through the appropriate protocol through which the application communicates with that server.
You can use ACLs to permit Cisco Unified Personal Communicator to connect to each server through the appropriate protocol for that server. For example, you can allow UDP traffic in the port range that Cisco Unified Personal Communicator uses for RTP, and then label it with the appropriate QoS actions.
When Cisco Unified Personal Communicator is in software phone mode, this configuration enables Cisco Unified Personal Communicator to send RTP media to, and receive RTP messages from, other audio and video endpoints across the IP network.
For details about ACLs, how to configure the voice VLAN, and how to configure QoS actions, see the switching and routing documentation for your network products.
Network Address Translation
The Cisco Unified Personal Communicator is not compatible with Network Address Translation (NAT). Cisco Unified Personal Communicator cannot use Simple Traversal of UDP through Network Address Translation (STUN), Traversal using NAT (TURN), or any other NAT-traversal scheme.
To traverse NAT, Cisco Unified Personal Communicator must be behind a virtual private network (VPN) connection.
Server Requirements
Note
Table 4 Cisco Unified Personal Communicator Server Requirements
Cisco Unified Communications Manager
•
Note
•
•
•
•
Note
Cisco Unified Presence
•
•
•
Cisco Unity
•
•
•
•
Cisco Unity Connection
•
•
•
•
Cisco Unified Personal Communicator supports all of these releases in systems where publisher and subscriber Cisco Unity Connection servers are integrated in an active-active configuration, regardless whether or not failover is configured.
Cisco Unified Meeting Place
For conference calls with video:
•
•
•
For meetings:
•
•
Cisco WebEx Node for MCS
•
Cisco WebEx Meeting Center
•
Cisco Unified Videoconferencing Multiple Control Unit (MCU)
•
•
Cisco Unified Survivable Remote Site Telephony
•
•
•
•
Cisco ASA Adaptive Security Appliances
•
For information on interdomain federation requirements, see the release notes for Cisco Unified Presence Release 8.0:
http://www.cisco.com/en/US/products/ps6837/prod_release_notes_list.html
LDAP
•
•
•
1 Cisco Unified Meeting Place Express VT 2.0 does not support web meetings.
Required Servers
The following servers are required for Cisco Unified Personal Communicator operation:
•
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
•
http://www.cisco.com/en/US/products/ps6837/tsd_products_support_series_home.html
•
Recommended Servers
To use the full functionality of Cisco Unified Personal Communicator, you must have the following products installed and operational:
•
–
http://www.cisco.com/en/US/products/ps6509/tsd_products_support_series_home.html
–
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.html
•
–
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/index.html
–
–
http://www.cisco.com/en/US/products/hw/video/ps1870/tsd_products_support_series_home.html
•
–
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/index.html
–
http://www.webex.com/smb/web-meeting-center.html
For details about how to integrate your conferencing server and Cisco Unified Personal Communicator, see the Deployment Guide for Cisco Unified Presence at the following URL:
http://www.cisco.com/en/US/products/ps6837/products_installation_and_configuration_guides_list.html
Client Computer Requirements
Before you install Cisco Unified Personal Communicator on any computer, the computer must meet the requirements described in these sections:
•
•
•
For more information about client PC requirements and audio quality impact refer to About Audio and Video Quality.
Hardware Requirements
Table 5 Hardware Requirements for Desktop and Laptop Computers for Audio and Video in Various Modes
Memory
1 GB
1 GB
1 GB
1 GB
2 GB
Available disk space
1 GB
1 GB
1 GB
1 GB
1 GB
Minimum Windows Experience Index (WEI) processor score1
2.0
4.0
4.0
4.8
5.9 and a system with at least four CPU cores.
Video card
A DirectX 9-compatible graphics card with this video RAM:
Windows XP
Not applicable
128 MB
128 MB
128 MB
256 MB
Windows Vista
Not applicable
256 MB
256 MB
256 MB
256 MB
Windows 7
Not applicable
256 MB
256 MB
256 MB
256 MB
I/O ports
When you use USB audio and video, USB 2.0 is required.
HD-capable USB 2.0 web camera, HDMI capture card, and HD camera.
1 Windows XP does not provide a WEI processor score.
Tested Video Devices
The video cameras tested with Cisco Unified Personal Communicator are as follows:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The following computers with built-in video cameras were tested with Cisco Unified Personal Communicator:
Tested Audio Devices
The following Plantronics audio devices have been tested and work with Cisco Unified Personal Communicator:
•
•
•
•
•
•
Note
The following additional audio devices have been tested and work with Cisco Unified Personal Communicator:
•
•
•
•
•
•
•
•
•
•
•
Note
Software Requirements
Tested Software Integrations
The following table lists the applications that have been successfully tested for compatibility with Cisco Unified Personal Communicator and the features that are available for each application.
Tested VPN Clients
The virtual private network (VPN) clients tested with Cisco Unified Personal Communicator are as follows:
•
•
Virtual Desktop Infrastructure (VDI) Support
Cisco Unified Personal Communicator Release 8.5(5) and later is supported on the following hosted virtual desktop applications:
•
•
Note
General Platform Requirement Notes
•
•
While Cisco does perform basic testing of third-party headsets and handsets for use with Cisco Unified Personal Communicator, it is ultimately the responsibility of the customer to test this equipment in their own environment to determine suitable performance.
Due to the many inherent environmental and hardware inconsistencies in the locations where Cisco Unified Personal Communicator is deployed, there is not a single best solution that is optimal for all environments.
•
Additional Documentation
To access hardening guides from vendors of operating systems, see the following URL:
http://www.microsoft.com/technet/security/prodtech/windows2000/win2khg/default.mspx
To access security configuration guides, see the National Security Agency (NSA) website at the following URL:
Software Interoperability
Before you deploy Cisco Unified Personal Communicator Release 8.5 to the computers of your users, ensure that there are no other applications installed on the computers of your users that use Cisco Unified Client Services Framework. The following applications use Cisco Unified Client Services Framework:
•
•
•
•
•
In addition, Cisco Unified Personal Communicator cannot co-exist with Microsoft Office Communicator/Microsoft Lync.
Codecs for Use with Cisco Unified Personal Communicator
A codec is an implementation of an algorithm capable of performing encoding and decoding on a digital data stream. Codecs are used to encode and decode data, such as sound and video streams, that would otherwise use large amounts of network bandwidth when transmitted or disk space when stored.
Video Codecs
You can use the following video codecs with Cisco Unified Personal Communicator:
•
Audio Codecs
You can use the following audio codecs with Cisco Unified Personal Communicator:
•
•
•
•
•
Compatibility Notes
•
•
http://www.cisco.com/en/US/products/ps6837/prod_release_notes_list.html
•
For details about performing upgrades, see the Deployment Guide for Cisco Unified Presence:
http://www.cisco.com/en/US/products/ps6837/products_installation_and_configuration_guides_list.html
Cisco Unified IP Phone Requirements
Table 8 lists the Cisco Unified IP Phone models that are supported for Cisco Unified Personal Communicator, and whether Skinny Call Control Protocol (SCCP) and Session Initiation Protocol (SIP) are supported:
Table 8 Phones Supported by Cisco Unified Personal Communicator
Cisco IP Communicator
Yes
Yes
Not applicable
9971
Not applicable
Yes
9951
Not applicable
Yes
8961
Not applicable
Yes
8945
Yes
Yes
No4
8941
Yes
Yes
No4
7985G
Yes
Not applicable
No
7975G
Yes
Yes
Yes5
7971G6
Yes
Yes
Yes5
7970G6
Yes
Yes
Yes5
7965G
Yes
Yes
Yes5
7962G
Yes
Yes
Yes5
7961G-GE6
Yes
Yes
Yes5
7961G6
Yes
Yes
Yes5
7960G
Yes
Not applicable
Yes
7945G
Yes
Yes
Yes5
7942G
Yes
Yes
Yes5
7941G-GE6
Yes
Yes
Yes5
7941G6
Yes
Yes
Yes5
7940G
Yes
Not applicable
Yes
7931G7
Yes
Not applicable
Yes
7925G
Yes
Not applicable
No
7921G
Yes
Not applicable
No
7920G6
Yes
Not applicable
No
7912G6
Yes
Not applicable
No
7911G
Yes
Yes
Yes5
7910G6
Yes
Not applicable
No
7906G
Yes
Yes
No
7905G6
Yes
Not applicable
No
7902G6
Yes
Not applicable
No
6961
Yes
Not applicable
6945
Yes
Yes
Yes
6941
Yes
Not applicable
6921
Yes
Not applicable
6911
Yes
Not applicable
69019
Yes
Not applicable
No
1 Requires SIP firmware upgrade Sip9971.9-1-0PD0-97.
2 Requires SIP firmware upgrade Sip9951.9-1-0PD0-97.
3 Requires SIP firmware upgrade Sip8961.9-1-0PD0-97.
4 This phone does not have a detachable camera. CAST cannot be enabled. Video can only be displayed on the phone, not the desktop
5 An SCCP firmware load is required to support video.
6 This phone is at the end of software maintenance.
7 For 7931G phones to function correctly with Cisco Unified Personal Communicator, you must set the value of the Outbound Call Rollover to field to No Rollover in Cisco Unified Communications Manager.
8 You must unplug the video from this model of phone to get CAST to work.
9 This phone does not support speakerphones or headsets.
To enable video on phones, the following conditions must exist:
•
•
For more information, see Users Might See Lower Video Quality When Computer Is Connected to Some Models of Cisco Unified IP Phone.
Note
About Audio and Video Quality
Cisco Unified Personal Communicator is designed to provide premium voice and video quality under a variety of conditions; however, in some instances users may notice interruptions of transmission or temporary distortions ("Artifacts") which are considered a normal part of the applications operation.
These artifacts should be infrequent and temporary when using:
•
•
We take reasonable measures to interface with the operating system in ways that decrease the likelihood that other applications running on the system will interfere with software phone audio and video quality. However, the shared nature of system environments in which these products run is very different than a closed environment like Cisco IP Phones and we cannot guarantee equivalent performance.
The following are some conditions that may cause artifacts:
•
•
•
•
•
•
Avoiding or recovering from the conditions previously listed will help minimize audio and video distortion artifacts.
Related Documentation
For a list of complete documentation for Cisco Unified Personal Communicator, see the documentation guide:
http://www.cisco.com/en/US/products/ps6844/products_documentation_roadmaps_list.html
New and Changed Information
Release 8.5(6)
This release unifies the client experience between the standalone Cisco Unified Personal Communicator application and the version running on virtualized clients. For information on the virtualized clients, refer to the following documentation locations:
•
•
Release 8.5(5)
This release provides the following new functionality and enhancements:
•
–
Note
Note
•
•
•
•
•
•
–
–
–
–
Release 8.5(3)
This release provides the following new functionality and enhancements:
•
•
•
•
•
•
•
Consider the following two examples for user joeblack:
–
–
Refer to the section (Cisco Unified Personal Communicator Release 8.5) Distributing HTML Files for Display in the Cisco Unified Personal Communicator Window in Chapter 12 of the Deployment Guide for Cisco Unified Presence Release 8.6 for additional information on configuring this feature. This section is available at the following location:
Release 8.5(2)
This release provides the following new functionality and enhancements:
•
•
•
•
Release 8.5(1)
The release provides the following new functionality and enhancements:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Installation Notes
After you place the order, you receive information on where to find documentation for Cisco Unified Personal Communicator, along with the Product Authorization Key (PAK). The PAK provides the software activation key and the license file.
For details about obtaining the license file, see the Deployment Guide for Cisco Unified Presence at the following URL:
http://www.cisco.com/en/US/products/ps6837/products_installation_and_configuration_guides_list.html
You download Cisco Unified Personal Communicator software from the Software Center (http://www.cisco.com/public/sw-center/sw-voice.shtml). You must have an account on Cisco.com to access this site.
•
•
•
•
•
•
•
Time Required to Install
If the computer on which you are installing Cisco Unified Personal Communicator does not already have Microsoft .NET installed, the Cisco Unified Personal Communicator installer installs Microsoft .NET. This will result in a longer installation time.
Installing Cisco Systems Network Protocol
When you install Cisco Unified Personal Communicator on Windows Vista or Windows 7, you might be prompted to install Cisco Systems Network Protocol device software. Install this software.
If you do not install this software, you cannot place video calls if you set your Cisco Unified Personal Communicator to use your desk phone for phone calls.
Installing Cisco Unified Personal Communicator Using MSI
The video components of Cisco Unified Client Services Framework require Microsoft Visual C++ 2005 version 8.0.59193. Microsoft Visual C++ 2005 must be installed before you install Cisco Unified Personal Communicator, if you are using MSI to install.
Microsoft provides a Microsoft Visual C++ 2005 redistributable package, vcredist_x86.exe. You can download this package from the following links:
•
To see the command line options, execute the following command:
vcredist_x86.exe /?
The Microsoft Visual C++ 2008 redistributable package is not compatible with Cisco Unified Client Services Framework: the Microsoft Visual C++ 2005 package is required.
Installing the Microsoft Visual C++ 2005 Redistributable Package
You can use an MSI file to install the Microsoft Visual C++ 2005 redistributable package. Extract the files vcredist.msi and vcredis1.cab from vcredist_x86.exe to a temporary folder. Use the following command line option:
vcredist_x86.exe /C /T:<full-path-to-folder>
Example
vcredist_x86.exe /C /T:C:\VCRedist
Use the extracted files to install Microsoft Visual C++ 2005.
Using Translation Patterns Instead of Application Dialing Rules
Cisco Unified Personal Communicator is easiest to install with Cisco Unified Communications Manager Release 7.0 or later, although you can install it with Cisco Unified Communications Manager Release 6.1(3) or later.
Cisco Unified Communications Manager Release 7.0 and later support +E.164 phone numbers. Cisco recommends that you use +E.164 phone numbers with Cisco Unified Personal Communicator, so that outgoing calls are easier to set up.
If you are using Cisco Unified Communications Manager Release 7.0 or later, Cisco recommends that you use translation patterns to set up outbound calls, rather than application dialing rules. If you use translation patterns, the rules are dynamically applied, and you do not need to restart services.
For detailed information on translation patterns, see the Cisco Unified Communications Manager Administration online help, or the Cisco Unified Communications Manager Administration Guide:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
Removing Cisco Unified Video Advantage
If Cisco Unified Video Advantage is installed on a client computer, you must uninstall it before you can install Cisco Unified Personal Communicator. If you do not uninstall Cisco Unified Video Advantage, you are prompted to do so during the Cisco Unified Personal Communicator installation.
Tip
Cisco Unified Personal Communicator Deployment
The Cisco Unified Personal Communicator installation application installs the following components:
•
•
•
•
The Cisco Unified Personal Communicator application is provided in two separate installation formats as follows:
•
•
This section describes the installation formats and the deployment options.
Executable File
Users can run the executable file on their own computers. The executable file includes the prerequisite software for the application, as follows:
•
•
•
–
–
–
Cisco Unified Personal Communicator checks if the prerequisite software is installed on the computer and if not, it automatically installs the prerequisites. To save time during the installation process, we recommend that you install the prerequisite software in advance of installing Cisco Unified Personal Communicator. All of the prerequisite software is available from the Microsoft website.
Note
Windows Installer (MSI) File
You can use a software management system to push the Windows Installer (MSI) file to the computers of your users. The MSI file does not contain any of the prerequisite software that is required for Cisco Unified Personal Communicator.
Note
The prerequisite software that you must install prior to installing the Cisco Unified Personal Communicator MSI file is:
•
•
•
–
–
–
The prerequisite software is available from the Microsoft website.
Deployment Options
You can deploy the Cisco Unified Personal Communicator installation application in one of the following ways:
•
•
•
•
Automated Mass Deployment
The mass deployment options for installing Cisco Unified Personal Communicator are as follows:
•
•
•
Standalone Installation
The administrator can install Cisco Unified Personal Communicator on each individual client computer or users can install the application on their own computers. The administrator can use the options listed in Automated Mass Deployment to deploy the administrator configuration settings.
Note
Deploying the MSI with Group Policy
Before You Begin
Ensure that all the computers or users on which you want to install Cisco Unified Personal Communicator are in the same domain.
Procedure
Step 1
gpmc.msc
Step 2
Step 3
Step 4
Step 5
Step 6
a.
b.
c.
d.
e.
f.
gpupdate /force
g.
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
The MSI file appears in the details pane.
The MSI file is pushed to each computer the next time that the computer updates policy settings.
The next time that the computer is restarted, the changes that you deployed in the Computer Configuration section of the group policy object are applied before the log-in screen is displayed on the computer.
Any changes that you deployed in the User Configuration section are applied after the user logs in to the domain. An information window displays descriptions of the changes as they are being made.
Deploying the MSI or Executable File from a Command
You can use commands to install Cisco Unified Personal Communicator. You can use either the msiexec command, or the CiscoUnifiedPersonalCommunicatorK9.exe command. You can also specify features to install with Cisco Unified Personal Communicator.
•
•
Using the msiexec Command
The syntax required for the msiexec command is as follows:
msiexec /i MSI-filename /q [ADDLOCAL="feature1[,...[feature9]]"]
The ADDLOCAL parameter specifies the features that you want to install. To successfully install Cisco Unified Personal Communicator, you must always include the CSF and JRE features.
Note
•
•
•
•
–
–
–
–
–
–
–
–
For example, to install Cisco Unified Personal Communicator with the click-to-call feature for Microsoft Excel and Microsoft Word, use the following command:
msiexec /i CiscoUnifiedPersonalCommunicatorK9.msi /q ADDLOCAL="CUPC,ClicktoCall,Word,Excel,CSF,PrivateJRE"
If you are deploying Cisco Unified Personal Communicator with Microsoft Office 2007 or 2010, you must include the Microsoft Office Integration feature, OfficeIntegrationC2X. Use the following command to install Cisco Unified Personal Communicator with the Microsoft Office Integration feature:
msiexec /i CiscoUnifiedPersonalCommunicatorK9.msi /q ADDLOCAL="CUPC,OfficeIntegrationC2X,CSF,PrivateJRE"
Related Topics
Features Available with Cisco Unified Personal Communicator
Using the CiscoUnifiedPersonalCommunicatorK9.exe Command
The syntax required for the CiscoUnifiedPersonalCommunicatorK9.exe command is as follows:
CiscoUnifiedPersonalCommunicatorK9.exe /s [/v"/q ADDLOCAL=\"feature1[,...[feature9]]\""]
For example, to install Cisco Unified Personal Communicator with the click-to-call feature for Microsoft Excel and Microsoft Word, use the following command:
CiscoUnifiedPersonalCommunicatorK9.exe /s /v"/q ADDLOCAL=\"CUPC,ClicktoCall,Word,Excel,CSF,PrivateJRE\""
Note
•
•
•
•
–
–
–
–
–
–
–
–
Related Topics
Features Available with Cisco Unified Personal Communicator
Features Available with Cisco Unified Personal Communicator
Table 9 lists the features that you can select when you install Cisco Unified Personal Communicator from a command.
Table 9 Features Available to Install with Cisco Unified Personal Communicator
CUPC
Cisco Unified Personal Communicator.
CSF
Essential feature. This must be installed for Cisco Unified Personal Communicator to operate correctly.
PrivateJRE
Essential feature. This must be installed for Cisco Unified Personal Communicator to operate correctly.
ClicktoCall
The Application Programming Interface (API) that the click-to-call features use is also installed if you select this feature.
OfficeIntegrationC2X
Integration for Microsoft Office applications with Click to Call, IM, and Presence features. This should only be chosen if Microsoft Office 2007 or 2010 is installed.
Excel
Click-to-call features for Microsoft Excel. 1
InternetExplorer
Click-to-call features for Microsoft Internet Explorer. 1
Outlook
Click-to-call features for Microsoft Outlook. 1
PowerPoint
Click-to-call features for Microsoft PowerPoint. 1
Word
Click-to-call features for Microsoft Word. 1
Firefox
Click-to-call features for Mozilla Firefox. 1
SmartTags
Smart Tag call menu options in Microsoft Office. 1
1 If you select this feature, the ClicktoCall feature is also selected automatically.
Users will be prompted to close the applications indicated when the following options are used:
•
•
•
•
•
•
•
•
Related Topics
•
Installing Security Certificates on Client Computers for Client Services Framework (CSF)
The following procedure describes the steps that the administrator needs to take to add security certificates to the keystore on the computer on which Cisco Unified Personal Communicator is running. By default, Cisco Unified Personal Communicator expects self-signed certificates, except when the administrator configures a CCMCIP security profile with a specified certificate type.
Procedure
Step 1
•
•
Step 2
a.
b.
Step 3
a.
b.
c.
–
–
–
Enabling Availability Status for Microsoft Office Users
To enable the availability status feature of Cisco Unified Personal Communicator to work with the supported Microsoft Office applications, the administrator must configure an attribute in Microsoft Active Directory.
Procedure
Step 1
Step 2
Step 3
Add a new value to the proxyAddresses attribute in the format `SIP:email-address', for example, `SIP:johndoe@cisco.com'.
Limitations and Restrictions
Review Table 10 before you work with Cisco Unified Personal Communicator. Table 10 lists known limitations that will not be fixed, and there is not always a workaround. The table is sorted by severity, then by identifier in alphanumeric order.
Some features might not work as documented, and some features could be affected by recent changes to the product. Make sure to read the Important Notes.
Note
Important Notes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Desktop Phone Mode Error
Cisco Unified Personal Communicator compares the local JTAPI file against the version hosted on Cisco Unified Communications Manager the first time it enters desktop phone mode each session. It downloads the server version to perform this comparison. If the server version cannot be downloaded within 30 seconds, an error is produced. Users can safely ignore this error and continue entering desktop phone mode.
DSCP Packet Marking
Note
Differentiated Services Code Point (DSCP) is an IP field responsible for classification of IP packets. It allows for Quality of Service on IP networks where packet priority is dependent on the DSCP value. Packets with higher DSCP values are given a higher priority as they traverse the network.
Windows Vista and 7 applications do not have the ability to set DSCP values. These operating systems reset all DSCP values to zero that have been set by the application if the user is not an administrator and the UAC user account control setting is turned on. This was the behavior on Cisco Unified Personal Communicator releases prior to 8.5(5). DSCP packet marking is operating system driven for Windows Vista and 7 in the non-Administrative user / UAC case.
Cisco Unified Personal Communicator 8.5(5) includes changes to ensure that audio and video streams are always set up within separate, specific port ranges. This is necessary because the Windows Vista and 7 operating systems need to mark DSCP values for audio and video packets differently and thus need a way to discover how to separately identify audio and video streams. Since the Cisco Unified Personal Communicator 8.5(5) changes guarantee that audio will always be set up within one port range and video in another, an OS Group Policy can be configured to distinguish one from the other and mark the media packets appropriately. Perform the following procedure to create audio and video group policies:
Procedure
Step 1
Step 2
Step 3
The port range between these two numbers is the port range all media streams use. From that port range you need two port ranges; an audio port range and a video port range. Calculate these ranges by allocating the bottom half of the range to audio and the top half to video.
Step 4
Step 5
•
•
•
•
•
Step 6
•
•
•
•
•
Step 7
•
•
•
•
•
Automatic Tethered Phone Selection
Cisco Unified Personal Communicator Release 8.5(5) adds capabilities for the automatic selection of a tethered phone. Cisco Unified Personal Communicator users will often have multiple desktop phone devices assigned to them but only one that is tethered to their workstation through an Ethernet cable. This new feature ensures that the tethered phone is always selected when a Cisco Unified Personal Communicator user enters desktop phone mode.
This feature is disabled by default. Set the AutomaticTetheredPhoneSelection registry key to true through a group policy setting to enable it. This key is located in HKEY_CURRENT_USER\Software\Policies\Cisco Systems, Inc.\Client Services Framework\AdminData. For additional information on setting group policies and registry settings in Cisco Unified Personal Communicator, refer to the following chapters in the Deployment Guide for Cisco Unified Presence Release 8.6:
•
•
The following usage scenarios outline the operation of this feature when it is enabled through the registry:
•
•
•
•
Note
Preferred Audio and Video Device Selection
Cisco Unified Personal Communicator Release 8.5(5) adds capabilities for the selection of preferred audio and video devices.
When Cisco Unified Personal Communicator is first installed, the devices selected as defaults by the operating system become the currently selected devices. If the user has a preferred audio or video device they wish to use when it is available, they will select it on the Audio or Video tab of the Options window and click Apply after selection is complete. Once applied, the chosen devices will override any other plugged in devices.
If the preferred device is removed from the workstation, Cisco Unified Personal Communicator will revert to using the operating system default devices. If the preferred device is removed from the workstation and a new device of the same type (audio or video) is introduced, this new device will become the currently selected device. If an additional device is introduced to the workstation while the preferred device is still present, it must be explicitly selected to become the new preferred device.
Automatic Server Discovery
Cisco Unified Personal Communicator contains a feature for the automatic discovery of Cisco Unified Presence servers. Previous versions of Cisco Unified Personal Communicator required either the administrator to push the server address to a client through a registry key or the client to manually enter the server address on the logon screen. Cisco Unified Personal Communicator can now use DNS SRV lookup to automatically find the Cisco Unified Presence server in the client's Active Directory domain.
DNS SRV is a record an administrator adds to a DNS server. This record can be added to any DNS domain but its addition to the Active Directory domain is recommended. A DNS SRV record is unlike a typical DNS record. Instead of storing a simple Host name and IP address pairing, DNS SRV records details about a particular service on a network. A DNS administrator can map many hosts to the same service name and assign a priority and weighting to each. This provides support for load balancing and failover services.
Cisco Unified Personal Communicator uses the following logon process when making use of the DNS SRV feature:
1.
2.
3.
4.
Cisco Unified Personal Communicator continues to support server identification through a registry key pushed to the client or manual entry.
Refer to the section Automatic Server Discovery in Chapter 13 of the Deployment Guide for Cisco Unified Presence Release 8.6 for additional information on configuring this feature. This section is available at the following location:
Dial via Office
Cisco Unified Personal Communicator contains Dial via Office (DVO) functionality. DVO is a feature that allows a user to configure an additional phone number for the purposes of call forwarding. Users who have configured a DVO number are called through their standard office phone number and the call is then forwarded to the additional number specified. Calls placed by the user display the caller ID of their standard office phone number.
Note
DVO is configured on the Call Options window. Click Calls and then select the Dial via Office checkbox. Enter the DVO number in the space provided.
DVO functionality is triggered when the call is answered. This can be through the user answering the call or the call being routed to voicemail.
Note
Enhanced Directory Integration
Enhanced Directory Integration (EDI) has been introduced in Cisco Unified Personal Communicator 8.5(2). EDI provides additional capabilities to the basic directory integration already present in Cisco Unified Personal Communicator. EDI simplifies the integration of Cisco Unified Personal Communicator and corporate directory services. This improved integration provides benefits to organizations of any size with different directory architectures and sizes. Advantages of Enhanced Directory Integration include:
•
•
•
•
•
•
Table 11 lists the differences between basic and enhanced integration.
This section contains the following topics:
Configuration
EDI is enabled using either an Active Directory group policy or Windows registry settings. Cisco provides group policy template files that include directory configuration settings. These templates are available in ADM and ADMX formats for Windows Server 2003 and 2008 environments.
Once enabled, most administrators should not need to provide additional directory integration configuration. Cisco directory integration uses automatic discovery to find the directory service Windows uses to discover a domain controller or global catalog server. This discovery is performed with a DNS Service request. This request will search for the domain controller or global catalog server in the native domain of the user's workstation. The native domain can be identified by examining the USERDNSDOMAIN environment variable.
Directory server information can be configured manually if the directory server is not discoverable through a DNS query. Configuration is performed using a group policy or through manipulation of the registry. The administrator should configure the IP address or Host Name of the primary and backup directory server as well as the port requests are received on.
Connections to a global catalog server are recommended. This server contains the primary directory attributes for all users in a Windows domain forest. Administrators can connect to a domain controller instead if the required search attributes are not present on the global catalog server. If possible, administrators should enable missing search attributes on the global catalog server so it can be used. Administrators should confirm with directory managers that photo attributes are available on the global catalog server when using contact photographs. If possible, enable these attributes on the global catalog server instead of relying on the domain controller. Directory integration looks for domain controllers on port 389 and global catalog servers on port 3268 by default. Specifying a port during configuration overrides these defaults.
Security
EDI encrypts all authentication data by default. If encryption is required for user credential and query data, SSL can be enabled. In this scenario, the SSL connection certificate must be present in the Windows certificate store. In a Windows domain, this certificate would typically be part of the workstation certificate store by default. SSL uses port 636 when communicating with a domain controller and port 3269 when communicating with a global catalog server. These defaults can be changed.
Windows encryption may need to be disabled in non-Windows Server environments. In such instances a basic bind will be used to connect to the directory. Credentials are transmitted in clear text when a basic bind is in use. SSL usage is highly recommended in this scenario.
Administrators can use a common set of credentials for directory integration to authenticate for directory queries. Administrators would push the credentials out to all workstations using a group policy or manipulation of registry settings. This is typically used when third party directory services are used. If credentials are not provided but required for the query, directory integration will attempt an anonymous bind to the service.
Photo Retrieval
Basic directory integration provides for the retrieval for contact photograph Universal Resource Indicators (URI). EDI provides three methods for photo retrieval:
•
EDI retrieves the attribute content of the directory attribute defined by PhotoUri group policy or registry setting. Directory integration then parses the attribute content. If the attribute contains binary data it will be displayed as a JPEG photograph. If the attribute contains a URI the photo will be retrieved from it. If a directory user object stores photos in the "thumbnailphoto" attribute, setting the PhotoURI setting to "thumbnailphoto" forces directory integration to retrieve the photo from this field. A photo can also be stored in the "jpegPhoto" attribute in the active directory.
•
EDI retrieves a contact photo based on the provided resource indicator. This resource indicator is formatted as a static HTTP request. No error checking is provided.
•
EDI retrieves a contact photo based on a dynamically constructed resource indicator using directory attributes. The URI is typically constructed using a base value plus the dynamic portion of the URI drawn from directory attributes.
Forced Authorization Codes Support
Forced Authorization Codes (FAC) allow for the limiting of phone usage to certain numbers by requiring users to enter authorization codes. When the user calls a number associated with an FAC route pattern, they will be prompted to enter the associated code. If the code is correct the call is allowed to proceed.
Client Matter Codes
Client matter codes (CMC) allow you to manage call access and accounting. CMC assists with call accounting and billing for billable clients by forcing the user to enter a code to specify that the call relates to a specific client matter. You can assign client matter codes to customers, students, or other populations for call accounting and billing purposes.
TLS and SRTP Support
Cisco Unified Personal Communicator 8.5 supports TLS for signaling and SRTP for secure media streaming.
Cisco VPN Client and CAST video
The Cisco VPN Client does not support CAST video on computers running in a 64 bit environment. Use the Cisco AnyConnect Client instead of the Cisco VPN Client in 64 bit environments.
Cisco VT Camera II Support on Windows 7 64-bit
Cisco Unified Personal Communicator 8.5(2) includes support for the Windows 7 64-bit and the Cisco VT Camera II. The Cisco VT Camera II however is not supported on Windows 7 64-bit. Although Cisco Unified Personal Communicator 8.5(2) provides support for both, this does not mean the Cisco VT Camera II will run on Windows 7 64-bit using Cisco Unified Personal Communicator 8.5(2). Users of the Cisco VT Camera II running a Windows 7 64-bit environment must use a different camera.
Enhanced Directory Integration Functionality and Cisco Unified Personal Communicator
Please note the following items when using the Enhanced Directory Integration functionality introduced in Cisco Unified Personal Communicator 8.5(2):
•
•
•
•
•
–
–
–
Cisco Unified Communications Manager 6.1(3) and Conference Participant Lists
If you use Cisco Unified Communications Manager 6.1(3), in conference calls the names of the participants are incorrect in the participant list.
Other Party Hears Cuts or Clips in Audio on a Call
When you are on a call with audio, or with audio and video, the other party might hear cuts or clips in your audio. The following table shows a possible solution to this problem. This solution relates only to particular audio devices, so you might not see the microphone boost setting referred to in the solution.
Users Hear Echo on Calls
When you are on a call with audio, or with audio and video, you might hear an echo. Camera microphones often have issues with echo. If you have selected your camera microphone as your microphone device, consider using a non-camera microphone as your microphone device.
To select another microphone device, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Voice Messages Show a Duration of Zero
When you view your voice messages, the duration of some messages might appear as zero. This problem occurs in releases of Cisco Unity and Cisco Unity Connection that are not supported by Cisco Unified Personal Communicator. To resolve this issue, upgrade your release of Cisco Unity or Cisco Unity Connection to a release that is supported by Cisco Unified Personal Communicator. For information on supported releases of Cisco Unity and Cisco Unity Connection, see Server Requirements.
Adding an Audio Call to a Video Call Results in an Audio Call
When you add an audio call to a video call, the party on the audio call does not receive a request to add video to their call. When the calls are merged, the call becomes an audio call.
Users of Cisco Unified IP Phone 8961, 6900 Series, and 9900 Series Models Cannot Control Desk Phone
If users with a Cisco Unified IP Phone 8961, 69xx, or 99xx model desk phone cannot use their desk phone from Cisco Unified Personal Communicator, you must add the users to the Standard CTI Allow Control of Phones supporting Connected Xfer and conf user group. For more information about how to do this, see the Deployment Guide for Cisco Unified Presence:
http://www.cisco.com/en/US/products/ps6837/products_installation_and_configuration_guides_list.html
JTAPI Error When a Call Is Placed
Users might see a JTAPI error about 15 seconds after they place a call, when Cisco Unified Personal Communicator is set to use the desk phone for phone calls.
To resolve this issue, ensure that your dial plan is set up correctly on Cisco Unified Communications Manager. In particular, ensure that Cisco Unified Communications Manager does not need to wait for more digits to be dialed.
For detailed information on setting up your dial plan, see the Cisco Unified Communications Manager Administration online help, or the Cisco Unified Communications Manager Administration Guide and the Cisco Unified Communications Manager System Guide:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
Limitation with Shared Lines When Deploying with Cisco Unified SRST
If you have Cisco Unified Survivable Remote Site Telephony (SRST) set up in your Cisco Unified Communication system, you can continue to place and receive calls during a system failure. In these circumstances, the Cisco Unified Personal Communicator uses shared lines to enable you to continue to place and receive calls.
Cisco Unified SRST does not support shared lines with SIP phones. Cisco Unified Personal Communicator receives only alternate calls if both of the following conditions occur:
•
•
However, the desk phone receives all calls.
Specifying Audio Value Names
Before you install Cisco Unified Personal Communicator, you must perform some configuration on the computers of your users. You can specify the Cisco Unified Client Services Framework client settings, including an Audio_ISAC_Advertised setting. This specifies whether to enable the advertising of the availability of the audio iSAC codec. Enter one of the following values for this setting:
•
•
The iSAC audio codec is only supported in Cisco Unified Communications Manager Release 8.0 and later.
How Cisco Unified Personal Communicator Determines the Audio Codec to Use on a Call
Cisco Unified Personal Communicator uses Cisco Unified Communications Manager devices for your Cisco Unified Personal Communicator software, and for your desk phone.
The audio bit rate capability of these devices is one of several factors that determine the audio capability of Cisco Unified Personal Communicator for the user. You specify this bit rate capability in Cisco Unified Communications Manager.
To configure the bit rate capability of these devices, use the region settings of the device pool that the devices are in. The following settings affect the audio bit rate capability of the devices:
8.0 or later
Max Audio Bit Rate
Earlier than 8.0
Audio Codec
For more information about region and device pool configuration in Cisco Unified Communications Manager, see the Cisco Unified Communications Manager Administration online help, or the Cisco Unified Communications Manager Administration Guide:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
When you place a call in Cisco Unified Personal Communicator, both endpoints advertise their audio codec capability to the Cisco Unified Communications Manager. The Cisco Unified Communications Manager selects the highest possible common codec between them. The default audio codec is G.711.
Chat Slow with Wireless Connection from Some Laptops
On some laptop computers, after you connect to a wireless network, then start a chat with a contact, CPU usage by the cupc.exe process might increase significantly.
To resolve this problem, install the latest display drivers for your laptop computer. If your computer is a Lenovo ThinkPad R400, T400, T500, or W500, install the drivers at the following URL:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70366.html
16-Bit Color Quality Might Cause High CPU Usage
Under certain rare conditions, Cisco Unified Personal Communicator might use higher than expected CPU resources. Users might notice that typing becomes slow, and see irregular movement when they move windows.
Try the following workarounds for this issue:
•
•
Availability Status Not Displayed in Microsoft Office
Both Cisco Unified Personal Communicator and Microsoft Office Communicator use the Microsoft Office Communicator Automation API to provide availability status, instant messaging, and telephony features to Microsoft Office. These features can only be provided by one of these applications at a time.
If you install Cisco Unified Personal Communicator after Microsoft Office Communicator, then you want to use these features from the Cisco Unified Personal Communicator integration, you must uninstall Microsoft Office Communicator, then run the Cisco Unified Personal Communicator installer again, and select the Repair option. If your availability status is not displayed in the To and Cc fields of your messages in Microsoft Office, then update the following group policy settings or registry settings on your computer:
Alternatively, you can apply the following keys to set the policies manually:
Microsoft Office 2007
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Outlook\IM]"EnablePresence"=dword:00000002
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Outlook\IM]"SetOnlineStatusLevel"=dword:00000002
Microsoft Office 2010
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\IM]"EnablePresence"=dword:00000002
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\IM]"SetOnlineStatusLevel"=dword:00000002
Uninstalling Microsoft Office Communicator
After you uninstall Microsoft Office Communicator, delete the contents of the folders listed in the following table:
Also clear the contents of the following registry key value name:
HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\AdminData
Overriding the Default Language and Regional Settings Used by Cisco Unified Personal Communicator
Cisco Unified Personal Communicator uses the operating system settings (GetUserDefaultLCID) to determine the desired language and regional settings. To override these settings, you can add values to the following registry key:
HKEY_CURRENT_USER\SOFTWARE\Cisco Systems, Inc.\Unified Communications\CUPC\
The values that you can add are:
•
•
•
Errors Displayed After Signing In to a Different Cisco Unified Presence Server
Problem
Solution
1.
–
–
2.
Long Meeting Passwords in Cisco WebEx Cause Problems
Problem
Solution
Additions to Deployment Documentation
Configuring Mailstore Server Names and Addresses on Cisco Unified Presence for Secure Voicemail
In Chapter 12 of the Cisco Unified Presence Release 8.5 Deployment Guide, in the section entitled "Configuring Mailstore Server Names and Addresses on Cisco Unified Presence", there should be a note saying:
Note
Before You Start Cisco Unified Personal Communicator as a Desktop Agent
In Chapter 12 of the Cisco Unified Presence Release 8.5 Deployment Guide, in the section entitled "Before You Start Cisco Unified Personal Communicator as a Desktop Agent", in addition to the two registry keys described in Step 1 of the procedure, you must also set the following registry key:
•
This specifies that your Cisco Unified Presence credentials are used to sign into Cisco Unified Communications Manager.
Notes on Video
•
•
•
•
•
•
Factors That Affect the Video Capability of Users
Factors that affect the frame format and frame rate that can be achieved on a video call are:
•
•
•
•
•
•
•
Determining the Bit Rate Required for a Particular Video Capability
Use Table 12 to determine the minimum bit rate that your Cisco Unified Personal Communicator requires to attain a particular frame format and frame rate.
Example
To configure Cisco Unified Personal Communicator for a user to be capable of video with VGA frame size, at 30 frames per second, Cisco Unified Personal Communicator requires a combined audio and video bit rate of at least 768 kb/s. Allow 64 kb/s for the audio codec to use with VGA frame format.
Configuring the Bit Rate Capability for Cisco Unified Personal Communicator
Cisco Unified Personal Communicator uses Cisco Unified Communications Manager devices for your Cisco Unified Personal Communicator software, and for your desk phone.
The bit rate, or bandwidth, capability of these devices is one of several factors that determine the video capability of Cisco Unified Personal Communicator for the user. You specify this bit rate capability in Cisco Unified Communications Manager.
To configure the bit rate capability of the devices, use the region settings of the device pool that the devices are in. The following settings affect the bit rate capability of the devices:
8.0 or later
•
•
Earlier than 8.0
•
•
For more information about region and device pool configuration in Cisco Unified Communications Manager, see the Cisco Unified Communications Manager Administration online help, or the Cisco Unified Communications Manager Administration Guide:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
Example
If you want your devices to be capable of 720p HD video calls at 30 frames per second (fps), configure the Region Settings to allocate a bit rate that can handle the 720p HD video at 30 fps, as well as the audio for the call.
If Cisco Unified Personal Communicator requires a minimum bit rate of 2000 kb/s to make a HD video call, and the audio bit rate for the region is set to 64 kb/s (G.722, G.711), then you must put the devices in a device pool that is in a region that is configured to have a video call bit rate as shown in the following table:
How Cisco Unified Client Services Framework Determines the Video Capability of Your Computer
Cisco Unified Client Services Framework derives the hardware profile of the machine as a WEI score. Cisco Unified Client Services Framework uses the WEI processor subscore to determine the send and receive video profile that is appropriate for your computer.
Table 13 lists the H.264/AVC levels that are supported, the bit rate and frame format for each level, and the minimum WEI processor subscore that is required to support each level
Limiting of Usage of Bandwidth by Users
The Video section in the Cisco Unified Personal Communicator Options dialog box contains a slider that enables you to limit the bandwidth that Cisco Unified Personal Communicator uses for video calls. Table 14 lists the bandwidth settings that are available on the slider, from highest to lowest, and the video implications for each level.
About Tuning Computers for Maximum Video Performance
To tune your computer for maximum video performance, do the following:
•
•
Note
Video Troubleshooting Tips
•
Users See Video Impairments
Problem
•
•
This problem occurs when:
•
•
•
•
•
Try one or more of the following suggested solutions.
Solution
Solution
1.
2.
3.
4.
Video Conversations with Multiple Displays
If your computer displays on more than one device, use the primary display for video conversations. Video hardware acceleration is generally not supported on non-primary displays, so CPU usage on non-primary displays becomes very high.
Users Might See Lower Video Quality When Computer Is Connected to Some Models of Cisco Unified IP Phone
Problem
This problem occurs if the link speeds and duplex configuration on either end of the connection are not the same. For example, if the link speed of the port at the PC port is 1000 Mb/s and the switch port is connected at 100 Mb/s. Alternatively, if the link on one end of the connection is half duplex, and the link on the other end is full duplex.
Contact your Cisco Support representative to get the latest update on this issue.
Solution
1.
2.
3.
For information about how to set network configuration settings on your Cisco Unified IP Phone, see the documentation for your phone. Refer to publications that are specific to your language, phone model, and Cisco Unified Communications Manager release. You can navigate to the documentation for your phone from the following URL:
http://www.cisco.com/cisco/web/psa/maintain.html?mode=prod&level0=278875240
Camera Troubleshooting Tips
•
•
Some Web Cameras Start When Users Sign In
The correct behavior of web cameras is that web cameras start when users start a video call, or a video conference call. In particular circumstances, some web cameras start when users sign in to Cisco Unified Personal Communicator. This occurs on particular hardware configurations, with particular web camera driver software.
In these circumstances, Cisco Unified Personal Communicator controls the web camera. Other applications cannot access the camera. However, you can still use the web camera for video calls, video conference calls, and so on.
To resolve this problem, install the latest drivers from the manufacturer of your web camera. If your computer is a Lenovo ThinkPad W500, install the drivers at the following URL:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70600.html
Poor Sound Quality on the Tandberg PrecisionHD USB Camera on Windows 7
Problem
Solution
To resolve this issue completely, install the software upgrade version 1.2 for the PrecisionHD USB Camera, as follows:
1.
http://www.tandberg.com/support/video-conferencing-software-download.jsp?t=2&p=94
2.
3.
4.
Tandberg PrecisionHD Camera Requires Windows Security Update
Problem
Solution
http://support.microsoft.com/kb/975560
Caveats
Using the Bug Toolkit
You can search for problems by using the Cisco Software Bug Toolkit. Known problems (bugs) are graded according to severity level. These release notes list the following types of bugs:
•
•
•
Before You Begin
To access Bug Toolkit, you need the following:
•
•
•
Procedure
Step 1
Step 2
Step 3
For information about how to search for bugs, create saved searches, create bug groups, and so on, click Help on the Bug Toolkit page.
Open Caveats
Table 15 describes possible unexpected behavior by Cisco Unified Personal Communicator on Windows. The table is sorted by severity, then by identifier in alphanumeric order.
Unless otherwise noted, these caveats apply to all Cisco Unified Personal Communicator releases. Because defect status continually changes, be aware that the tables reflects a snapshot of the defects that were open at the time this report was compiled. For more information about an individual defect, click the associated identifier in the table to access the online record for that defect, including workarounds. For an updated view of open defects, access the Bug Toolkit. For details, see Using the Bug Toolkit.
Note
Note
http:/www.cisco.com/en/US/products/ps6837/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Resolved Caveats
This section lists caveats that may have been open in previous releases and are now resolved.
Caveats are listed in order of severity and then in alphanumeric order by bug identifier. Only severity 1, severity 2, and select severity 3, 4, 5, and 6 resolved defects, as well as all customer-found defects, are listed in this section. Because defect status continually changes, be aware that this document reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access the Bug Toolkit (see the Using the Bug Toolkit).
The following sections list caveats that are resolved in Cisco Unified Personal Communicator Release 8.5(1) but that may have been open in previous releases:
Release 8.5(6)
Table 16 lists the caveats that were resolved in Release 8.5(6).
Release 8.5(5)
Table 17 lists the caveats that were resolved in Release 8.5(5).
Release 8.5(3)
Table 18 lists the caveats that were resolved in Release 8.5(3).
Release 8.5(1)
Table 19 lists caveats that were resolved in Release 8.5(1).
Accessibility Notes
Cisco Unified Personal Communicator is introducing accessibility features in phases. Users familiar with previous versions of Cisco Unified Personal Communicator will see a subset of keyboard shortcuts and features in this release.
For additional information, refer to:
http://www.cisco.com/web/about/responsibility/accessibility/legal_regulatory/vpats.html
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently uses RSS version 2.0.
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending e-mail to export@cisco.com.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.
