Use the Status > System Information page to view information about the ATA and its current settings.
Field
Description
Model
The model number and product description.
Hardware Version
The hardware version number.
Boot Version
The boot firmware version number.
Firmware Version
The current firmware version.
Recovery Firmware
The version number of the recovery firmware.
WAN MAC Address
The MAC address of the WAN interface.
Host Name
The host name of the ATA.
Domain Name
The domain name of the ATA.
Serial Number
The serial number of the ATA.
Current Time
Time that is set on the ATA.
Interface Information
Use the Status > Interface Information page to view information for the WAN interface (INTERNET port) and on SPA122 only, the LAN interface (ETHERNET port).
Interface List
Field
Description
Interface
The name of the interface: WAN or LAN (SPA122 only).
Connect Type
The type of connection configured for the interface.
IP Address
The IP address of the interface.
Subnet Mask
The subnet mask of the interface.
MAC Address
The MAC address of the interface.
Port List (SPA122 only)
Field
Description
Interface
The name of the interface: WAN or LAN.
TX (pkts)
The number of packets transmitted from this port.
RX (pkts)
The number of packets received by this port.
Status
The status of the port, showing whether the port is connected to a device or disconnected.
Clear TX & RX
Click this button to reset to 0 the count of TX and RX packets.
Internet Status
Use the Status > Internet Status page to view information about the WAN interface (INTERNET port).
Field
Description
Link Status
The status of the INTERNET (WAN) interface, showing whether the port is connected or disconnected.
IP Address
The IP address of the INTERNET (WAN) interface.
Netmask
The subnet mask for the INTERNET (WAN) interface.
Gateway
The IP address of the default gateway.
Host Name
The host name of the ATA.
Domain Name
The domain name of the ATA.
MTU Type
The method for setting the MTU: Auto or Manual.
MTU Size
The largest protocol data unit (in bytes) permitted for network transmission.
DNS 1-3 (if applicable)
IP addresses for up to three DNS servers that are used for name resolution.
Port Statistics (SPA122 only)
Use the Status > Port Statistics page to view information about the port activity on the WAN interface (INTERNET port) and the LAN interface (ETHERNET port).
Field
Description
Input (pkts)
The number of packets received by the port.
Output (pkts)
The number of packets transmitted by the port.
Input Errors
The number of receive errors for incoming traffic.
Input Broadcasts
The number of broadcast messages received by the interface.
Output Broadcasts
The number of broadcast messages sent by the interface.
Input Multicasts
The number of multicast messages received by the interface.
Output Multicasts
The number of multicast messages sent by the interface.
DHCP Server Information (SPA122 only)
Use the Status > DHCP Server Information page to view information about the DHCP server and clients.
DHCP Pool Information
Field
Description
Client Name
The host name of the DHCP client.
IP Address
The IP address leased to the client.
MAC Address
The MAC address of the DHCP client.
Expires Time
The remaining time in the current DHCP lease, shown in HH:MM:SS (hours:minutes:seconds) format. The page is periodically updated with the new value as the timer counts down.
Interface
The interface through which the client is connected.
DHCP Server Details
Field
Description
DHCP Server
The status of the DHCP server: Enabled or Disabled.
IP Address / Mask
The IP address and subnet mask for the ETHERNET (LAN) interface.
DNS Proxy
The setting for the DNS proxy service: Enabled or Disabled.
Maximum DHCP Users
The maximum number of clients that can lease an IP address from the DHCP server.
IP Address Range
The range of IP addresses that can be dynamically assigned by the DHCP server.
Client Lease Time
The maximum amount of time, in minutes, that a client can lease a dynamically assigned IP address.
Static DNS
The IP addresses of up to three DNS servers to be used by DHCP clients.
Option 66
The setting for Option 66, which provides provisioning server address information to hosts requesting this option. The ATA may be set to None (internal), Remote TFTP Server, or Manual TFTP Server.
TFTP Server
The IP address, hostname, or URL of the TFTP server used for provisioning.
Option 67
The configuration/bootstrap filename that is provided to hosts that request this option.
Option 159
The configuration URL that is provided to clients that request this option.
Option 160
The configuration URL that is provided to clients that request this option.
Feedback
Port Statistics (SPA122 only)