Table Of Contents
Disaster Recovery System Administration Guide for Cisco Unity Connection Release 9.x
What is the Disaster Recovery System?
Task Lists for Backing Up and Restoring Cisco Unity Connection
Task List for Backing Up Cisco Unity Connection
Task List for Restoring Cisco Unity Connection
System Requirements
How to Access the Disaster Recovery System
Master Agent Duties and Activation
Local Agents
Managing Backup Devices
Creating and Editing Backup Schedules
Enabling, Disabling, and Deleting Schedules
Starting a Manual Backup
Checking Backup Status
Checking the Status of the Current Backup Job
How a Restore Affects Cisco Unity Connection Voice Messages
Restoring or Replacing Cisco Unity Connection Servers
Viewing the Restore Status
Viewing the Backup and Restore History
Backup History
Restore History
Managing DRS Backup Remotely
Trace Files
Command Line Interface
Alarms and Messages
Related Documentation
Obtaining Documentation and Submitting a Service Request
Cisco Product Security Overview
Disaster Recovery System Administration Guide for Cisco Unity Connection Release 9.x
Revised November 23, 2012
This guide provides an overview of the Disaster Recovery System, describes how to use the Disaster Recovery System, and provides procedures for completing various backup-related tasks and restore-related tasks. This guide serves as a reference and procedural guide that is intended for users of Cisco Unified Communications Manager and other Cisco IP telephony applications.
This document includes the following topics:
•
What is the Disaster Recovery System?
•Task Lists for Backing Up and Restoring Cisco Unity Connection
•System Requirements
•How to Access the Disaster Recovery System
•Master Agent Duties and Activation
•Local Agents
•Managing Backup Devices
•Creating and Editing Backup Schedules
•Enabling, Disabling, and Deleting Schedules
•Starting a Manual Backup
•Checking Backup Status
•How a Restore Affects Cisco Unity Connection Voice Messages
•Restoring or Replacing Cisco Unity Connection Servers
•Viewing the Restore Status
•Viewing the Backup and Restore History
•Managing DRS Backup Remotely
•Command Line Interface
•Alarms and Messages
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
•Cisco Product Security Overview
What is the Disaster Recovery System?
The Disaster Recovery System (DRS), which can be invoked from, Cisco Unity Connection Administrationprovides full data backup and restore capabilities. The Disaster Recovery System allows you to perform regularly scheduled automatic or user-invoked data backups.
DRS restores its own settings (backup device settings and schedule settings) as part of the platform backup/restore. DRS backs up and restores drfDevice.xml and drfSchedule.xml files. When the server is restored with these files, you do not need to reconfigure DRS backup device and schedule.
Caution Before you restore, ensure that the version that is installed on the server matches the version of the backup file that you want to restore. The Disaster Recovery System supports only matching versions for restore. For example, the Disaster Recovery System does not allow a restore from version 6.1.(1).1000-1 to version 6.1(2).1000-1, or from version 6.1.(2).1000-1 to version 6.1(2).1000-2
Caution Before you restore Cisco Unity Connection, ensure that the hostname, IP address, version, and deployment type of the restore matches the hostname, IP address, version, and deployment type of the backup file that you want to restore.
The Disaster Recovery System includes the following capabilities:
•A user interface for performing backup and restore tasks.
•A distributed system architecture for performing backup and restore functions.
•Scheduled backups.
•Archive backups to a physical tape drive or remote SFTP server.
The Disaster Recovery System contains two key functions, Master Agent (MA) and Local Agent (LA). The Master Agent coordinates backup and restore activity with Local Agents.
Caution DRS encryption depends on the cluster security password. If you change this security password through the Command Line Interface or a fresh install, then it is recommended that you take a fresh backup immediately or remember the old security password.
Note When a Cisco Unity Connection cluster is configured, The Disaster Recovery System uses an SSL-based communication between the Master Agent and the Local Agent for authentication and encryption of data between the publisher and subscriber servers. DRS makes use of the IPSec certificates for its Public/Private Key encryption. Be aware that if you delete the IPSEC truststore(hostname.pem) file from the Certificate Management pages, then DRS will not work as expected. If you delete the IPSEC-trust file manually, then you must ensure that you upload the IPSEC certificate to the IPSEC-trust.
Caution Schedule backups during off-peak hours to avoid call-processing interruptions and impact to service.
Task Lists for Backing Up and Restoring Cisco Unity Connection
Added November 16, 2010
The following tables list the tasks for backing up and restoring Cisco Unity Connection.
Note DRS backs up and restores the backup device settings and backup schedule settings, so you do not need to reconfigure DRS settings after a restore.
Task List for Backing Up Cisco Unity Connection
Table 1 provides a task list for backing up Cisco Unity Connection by using the Disaster Recovery System.
Task List for Restoring Cisco Unity Connection
Table 2 provides a task list for restoring Cisco Unity Connection by using the Disaster Recovery System.
System Requirements
To back up data to a remote device on the network, you must have an SFTP server that is configured. Cisco allows you to use any SFTP server product but recommends SFTP products that have been certified with Cisco through the Cisco Technology Developer Partner program (CTDP). CTDP partners, such as GlobalSCAPE, certify their products with specified version of Cisco Unity Connection. For information on which vendors have certified their products with your version of Cisco Unity Connection, refer to the following URL:
http://www.cisco.com/pcgi-bin/ctdp/Search.pl
Cisco uses the following servers for internal testing. You may use one of the servers, but you must contact the vendor for support:
•Open SSH (refer to http://sshwindows.sourceforge.net/)
•Cygwin (refer to http://www.cygwin.com/)
•Titan (refer to http://www.titanftp.com/)
Cisco does not support using the SFTP product FreeFTPd. This is because of the 1 GB file size limit on this SFTP product.
Note For issues with third-party products, contact the corresponding vendor for support
Note While a backup or restore is running, you cannot perform any OS Administration tasks because Disaster Recovery System blocks all OS Administration requests by locking the platform API. However, this does not block most CLI commands as only the CLI-based upgrade commands use the Platform API locking package.
Tip Schedule backups during periods when you expect less network traffic.
Note Be aware that if you migrate to an HP DL380-G6 server (software-only), you will not be able to install older versions of Cisco Unified Communications Manager (5.x and 6.x) on the new server. Therefore, to be able to run a DRS backup, you must install the older version of Cisco Unified Communications Manager on your old publisher (which may no longer be supported). Once this backup has been completed, you will be able to restore it on your HP DL380-G6 (software-only) publisher.
How to Access the Disaster Recovery System
To access the Disaster Recovery System, choose Disaster Recovery System from the Navigation drop-down list box in the upper, right corner of the Cisco Unity Connection Administration window. Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Note You set the Administrator username and password during Cisco Unity Connection installation, and you can change the Administrator password or set up a new Administrator account by using the Command Line Interface (CLI). Refer to the Command Line Interface Reference Guide for Cisco Unifed Communications Solutions for more information.
Master Agent Duties and Activation
The system automatically activates the Master Agent (MA) on the server.
The Master Agent (MA) performs the following duties:
•The MA stores systemwide component registration information.
•The MA maintains a complete set of scheduled tasks in an XML file. The MA updates this file when it receives updates of schedules from the user interface. The MA sends executable tasks to the applicable Local Agents, as scheduled. (Local Agents execute immediate-backup tasks without delay.)
•You access the MA through the Disaster Recovery System user interface to perform activities such as configuring backup devices, scheduling backups by adding new backup schedules, viewing or updating an existing schedule, displaying status of executed schedules, and performing system restoration.
•The MA stores backup data on a locally attached tape drive or a remote network location.
Local Agents
The server has a Local Agent to perform backup and restore functions.
The Local Agent runs backup and restore scripts on the server.
Note When a Cisco Unity Connection cluster is configured, the Disaster Recovery System uses an SSL-based communication between the Master Agent and the Local Agent for authentication and encryption of data between the publisher and subscriber servers. DRS makes use of the IPSec certificates for its Public/Private Key encryption. This certificate exchange gets handled internally; you do not need to make any configuration changes to accommodate this exchange.
Managing Backup Devices
Before using the Disaster Recovery System, you must configure the locations where you want the backup files to be stored. You can configure up to 10 backup devices. Perform the following steps to configure backup devices.
Note You can add, delete, and list devices through the Command Line Interface. For more information on CLI commands for DRS, refer to the "Command Line Interface" section.
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
Note When a Cisco Unity Connection cluster is configured, we recommend that you back up the publisher server and, optionally, the subscriber server.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > Backup Device. The Backup Device List window displays.
Step 4 To configure a new backup device, click Add New.
Step 5 To edit a backup device, select it in the Backup Device list. Then, click Edit Selected.
The Backup Device window displays.
Step 6 Enter the backup device name in the Backup device name field.
Note The backup device name may contain only alphanumeric characters, spaces ( ), dashes (-) and underscores (_). Do not use any other characters.
Step 7 Choose one of the following backup devices and enter the appropriate field values in the Select Destination area:
•Tape Device—Stores the backup file on a locally attached tape drive. Choose the appropriate tape device from the list. Note the following considerations:
–You cannot use more than one tape for a single backup. If you have more data than will fit on a tape, either you must store backups on a network directory, or you must back up components on one tape and back up mailbox stores on one or more additional tapes.
–You cannot store more than one backup on a tape; each backup overwrites the data from the previous backup, so you only have the data from the most recent backup. If you want to create more than one backup for a server (components in one backup, mailbox stores in another backup, for example), you must use separate tapes. Otherwise, you will only have the portion of the data that you backed up last.
Note Be aware that if you are logged in through a VMware virtual machine, you cannot back up on a tape. This is because the tape device option is disabled for VMware users.
•Network Directory—Stores the backup file on a network drive that is accessed through an SFTP connection. Enter the following required information:
–Server name: Name or IP address of the network server
–Path name: Path name for the directory where you want to store the backup file
–User name: Valid username for an account on the remote system
–Password: Valid password for the account on the remote system
–Number of backups to store on Network Directory: The number of backups to store on this network directory.
If you are backing up more than one Connection server, we recommend that you create a separate directory on the network drive for each Connection server. In addition, if you are using DRS to back up other applications (Cisco Unified Communications Manager, Cisco Unified Presence), we recommend that you create a separate directory for each of the other servers. The value that you specify here applies to all of the backups in the directory, not just the backups for one server. For example, suppose you want to retain three backups for a Connection server and three backups for a Cisco Unified Communications Manager server. If you specify the same network directory for both servers, and if you specify three as the number of backups to store in the directory on both servers, only the most recent three backups will appear in the directory. If the last three backups were of the Connection server, you will not have any Cisco Unified Communications Manager backups at all.
Specify a value high enough to ensure that the backups you want to keep are not overwritten. For example, if you configure DRS so a full backup of a Connection server requires three separate backups (components, MailboxStore1, and MailboxStore2) and if you want to retain the two most recent full backups, choose 6 here. Choosing a lower number will cause the Disaster Recovery System to overwrite backups that you want to retain.
The location you specified in the Path Name field must have enough space for the number of backups you specify here plus one. When the network drive contains the maximum number of backups that you want to store, DRS saves the newest backup to that location before deleting the oldest backup.
Note You must have access to an SFTP server to configure a network storage location. The SFTP path must exist prior to the backup. The account that is used to access the SFTP server must have write permission for the selected path.
Step 8 To update these settings, click Save.
Note After you click the Save button, the DRS Master Agent validates the selected backup device. If the user name, password, server name, or directory path is invalid, the save will fail.
Step 9 To delete a backup device, select it in the Backup Device list. Then, click Delete Selected.
Note You cannot delete a backup device that is configured as the backup device in a backup schedule.
Creating and Editing Backup Schedules
You can create up to 10 backup schedules. Each backup schedule has its own set of properties, including a schedule for automatic backups, the set of features to back up, and a storage location.
Note You can list and add backup schedules through the Command Line Interface. For more information on CLI commands for DRS, refer to the "Command Line Interface" section.
Note Be aware that your backup .tar files are encrypted by a randomly generated password. This password is then encrypted by using the cluster security password and gets saved along with the backup .tar files. You must remember this security password or take a backup immediately after the security password change/reset.
Perform the following steps to manage backup schedules:
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > Scheduler.
The Schedule List window displays.
Step 4 Do one of the following steps to add a new schedule or edit an existing schedule
a. To create a new schedule, click Add New.
b. To configure an existing schedule, click its name in the Schedule List column.
The scheduler window displays.
Step 5 Enter a schedule name in the Schedule Name field.
Note You cannot change the name of the default schedule.
Step 6 Select the backup device in the Select Backup Device area.
Step 7 Select the features to back up in the Select Features area. You must choose at least one feature.
Always choose to back up the following features:
•Recorded greetings and voice names (CONNECTION_GREETINGS_VOICENAMES).
•The database (CONNECTION_DATABASE).
•Other Connection-specific data (CUC).
Backing up messages (CONNECTION_MESSAGES_<database name>) is optional.
Step 8 Choose the date and time when you want the backup to begin in the Start Backup at area. Note the following:
•Schedule backups during off-peak hours to avoid affecting system performance.
•Do not schedule a backup to run while the Update Database Statistics task is running. By default, this task runs daily at 3:30 am.
Step 9 Choose the frequency at which you want the backup to occur in the Frequency area: Once, Daily, Weekly, or Monthly. If you choose Weekly, you can also choose the days of the week when the backup will occur.
Tip To set the backup frequency to Weekly, occurring Tuesday through Saturday, click Set Default.
Step 10 To update these settings, click Save.
Step 11 To enable the schedule, click Enable Schedule.
The next backup occurs automatically at the time that you set.
Step 12 To disable the schedule, click Disable Schedule.
Enabling, Disabling, and Deleting Schedules
Procedure
Note You can enable, disable, and delete backup schedules through the Command Line Interface. For more information on CLI commands for DRS, refer to the "Command Line Interface" section.
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > Scheduler.
The Schedule List window displays.
Step 4 Check the check boxes next to the schedules that you want to modify.
•To select all schedules, click Select All.
•To clear all check boxes, click Clear All.
Step 5 To enable the selected schedules, click Enable Selected Schedules.
Step 6 To disable the selected schedules, click Disable Selected Schedules.
Step 7 To delete the selected schedules, click Delete Selected.
Starting a Manual Backup
Follow this procedure to start a manual backup.
Note Be aware that your backup .tar files are encrypted by a randomly generated password. This password is then encrypted by using the cluster security password and gets saved along with the backup .tar files. You must remember this security password or take a backup immediately after the security password change/reset.
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > Manual Backup. The Manual Backup window displays.
Step 4 Select a backup device in the Select Backup Device area.
Step 5 Select the features to back up in the Select Features area.
Always choose to back up the following features:
•Recorded greetings and voice names (CONNECTION_GREETINGS_VOICENAMES).
•The database (CONNECTION_DATABASE).
•Other Connection-specific data (CUC).
Backing up messages (CONNECTION_MESSAGES_<database name>) is optional.
Step 6 To start the manual backup, click Start Backup.
Checking Backup Status
You can check the status of the current backup job and cancel the current backup job. To view the backup history, see the "Viewing the Backup and Restore History" section.
Caution Be aware that if the backup to the remote server is not completed within 20 hours, the backup session will time out. You will then need to begin a fresh backup.
Checking the Status of the Current Backup Job
Perform the following steps to check the status of the current backup job.
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > Current Status. The Backup Status window displays.
Step 4 To view the backup log file, click the log filename link.
Step 5 To cancel the current backup, click Cancel Backup.
Note The backup cancels after the current component completes its backup operation.
How a Restore Affects Cisco Unity Connection Voice Messages
Added November 16, 2010
If you back up Connection, create one or more new mailbox stores, and then restore without backing up the new mailbox stores, the new mailbox stores are deleted.
If you back up and restore only the Connection directory, without also backing up and restoring Connection voice messages, some user folders may be deleted, depending on whether the associated features are in use for those users:
•The drafts folder is created the first time a user saves a draft message after the feature is configured. (You must either configure Connection to automatically save draft messages when users are disconnected or hang up, or configure Connection to allow users to save draft messages.)
•The future delivery folder is created the first time a user marks a message for future delivery. (Future delivery is not configurable.)
•The sent items folder, which allows users to recall messages they have already sent, is created the first time a user sends a voice message after message recall is configured. (In Cisco Unity Connection Administration, you must change the value of the Sent Messages: Retention Period (in Days) setting on the System Settings > Advanced > Messaging page to a value greater than zero.)
If the folders contain any messages, the messages are moved to the undeliverable messages folder.
Restoring or Replacing Cisco Unity Connection Servers
If you are restoring Cisco Unity Connection data on an existing server or on both servers in a Cisco Unity Connection cluster, do the procedure in this section.
If you are replacing a Cisco Unity Connection server or replacing the hard disks in a Connection server, including one or both servers in a Cisco Unity Connection cluster, start with the applicable task list in the "Replacing Cisco Unity Connection 9.x Servers or Hard Disks" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection Release 9.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/upgrade/guide/9xcucrugx.html. Each task list will redirect you to the procedure in this section to restore data.
Note Cisco Unity Connection does not support restoring or replacing clone cluster. Also, pre-configured backup devices must be created before restoring Connection servers.
Procedure
Step 1 If you reinstalled software on the server or on a Cisco Unity Connection cluster, do the following steps, as applicable:
a. Confirm that the IP address and host name of the server match the IP address and host name when the server was backed up. Otherwise, the restore will fail.
In addition, if Cisco Unity Connection is running on a virtual machine, confirm that the following settings match the values when the server was backed up. The settings are used to create the license MAC value for the Connection virtual machine, and if you change any of them, you must get new license files for the virtual machine.
–Time zone
–NTP server
–NIC speed and duplex settings
–DHCP settings
–Primary DNS settings
–SMTP hostname
–X.509 Certificate information (Organization, Unit, Location, State, and Country)
b. Confirm that the Cisco Unity Connection version that is installed on the server exactly matches the Connection version that was installed when you made the backup.
For example, the Disaster Recovery System does not allow a restore from version 8.5(1).1000-1 to version 8.5(2).1000-1, or from version 8.5(2).1000-1 to version 8.5(2).1000-2. (The last parts of the version number change when you install a service release or an engineering special.)
c. Confirm that you have the security password that was in effect when the Cisco Unity Connection server was backed up.
DRS encrypts backed-up data by using the security password as the encryption key. If you changed the security password after the last backup, DRS will ask for the old security password.
d. Reinstall the licenses that were originally installed on the server.
e. If any Connection languages were previously installed, reinstall the same languages.
Step 2 On the Cisco Unity Connection server, sign in to Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Restore > Restore Wizard. The Restore Wizard Step 1 window displays.
Step 4 Choose the backup device from which to restore in the Select Backup Device area. Then, click Next.
The Restore Wizard Step 2 window displays.
Step 5 Choose the backup file that you want to restore.
Note The backup filename indicates the date and time that the system created the backup file.
Step 6 Click Next. The Restore Wizard Step 3 window displays.
Step 7 Always choose to restore the following features:
•Recorded greetings and voice names (CONNECTION_GREETINGS_VOICENAMES).
•The database (CONNECTION_DATABASE): Restoring messages (CONNECTION_MESSAGES_<database name>) is optional.
•Other Connection-specific data (CUC).
Note The only features listed are the features that were included in the backup.
Step 8 Click Next. The Restore Wizard Step 4 window displays.
Step 9 Select the Perform file integrity check using SHA1 Message Digest checkbox if you want to run a file integrity check.
Note The file integrity check is optional and is only required in the case of SFTP backups. You do not need to run a file integrity check when restoring from tape and local device backups.
Note Be aware that the file integrity check process consumes a significant amount of CPU and network bandwidth, which considerably slows down the restore process.
Step 10 When you are prompted to choose the node to restore, choose the same features that you selected in Step 7, and click Next.
Caution Existing data for the selected features is overwritten.
Step 11 To start restoring the data, click Restore.
Note If you selected the Perform file integrity check using SHA1 Message Digest checkbox in Step 7, DRS runs a file integrity check on each file when you click Restore. If the system finds discrepancies in any .tar file during the check, the restore process will ERROR out the component that failed the integrity check and move to restore the next .tar file (that is, the next component).
Step 12 To view the status of the restore, see the "Viewing the Restore Status" section.
Step 13 Restart the server. For more information on restarting, see the "System Restart" chapter of the Cisco Unified Communications Operating System Administration Guide for Cisco Unity Connection Release 9.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/os_administration/guide/9xcucosagx.html.
Step 14 If you are restoring a Connection standalone server, skip to Step 15.
If you are restoring a Connection cluster, force Connection to copy the data from the publisher to the subscriber server:
a. After the publisher server has finished restarting, log on to the command line interface for the subscriber server.
b. At the command line, run the following command to force Connection to copy data from the publisher server to the subscriber server:
utils cuc cluster overwritedb
c. Check the status of the Connection cluster on the subscriber server. At the command line, run the following command:
d. Log on to the command line interface for the publisher server.
e. Check the status of the Connection cluster on the publisher server. At the command line, run the following command:
Step 15 During off-peak hours, re-synchronize message-waiting indicators for each phone system:
a. In Cisco Unity Connection Administration, expand Telephony Integrations, and click Phone System.
b. Click the name of the first phone system.
c. For Synchronize All MWIs on This Phone System, click Run.
d. Repeat Step a. through Step c. for the remaining phone systems.
Step 16 If you are servers or hard disks, return to the applicable task list in the "Replacing Cisco Unity Connection 9.x Servers or Hard Disks" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection Release 9.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/upgrade/guide/9xcucrugx.html.
Viewing the Restore Status
To check the status of the current restore job, perform the following steps:
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Restore >Status. The Restore Status window displays.
The Status column in the Restore Status window shows the status of the restoration in progress, including the percentage of completion of the restore procedure.
Step 4 To view the restore log file, click the log filename link.
Viewing the Backup and Restore History
Using the following procedures, you can see the last 20 backup and restore jobs:
•Backup History
•Restore History
Backup History
Perform the following steps to view the backup history.
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Backup > History. The Backup History window displays.
Step 4 From the Backup History window, you can view the backups that you have performed, including filename, backup device, completion date, result, and features that are backed up.
Note The Backup History window displays only the last 20 backup jobs.
Restore History
Perform the following steps to view the restore history.
Procedure
Step 1 In Cisco Unity Connection Administration, in the Navigation list, click Disaster Recovery System, and click Go.
The Disaster Recovery System Logon window displays.
Step 2 Log in to the Disaster Recovery System by using the same Administrator username and password that you use for Cisco Unified Communications Operating System Administration.
Step 3 Navigate to Restore > History. The Restore History window displays.
Step 4 From the Restore History window, you can view the restores that you have performed, including filename, backup device, completion date, result, and the features that were restored.
Note The Restore History window displays only the last 20 restore jobs.
Managing DRS Backup Remotely
The Disaster Recovery System (DRS), which provides full data backup, can be invoked remotely by using the following URL:
https://<UC Application>/platform-services/services/< MaintenanceService>?wsdl
where --
•<UC Application> specifies the name of the Cisco Unity Connection server.
•<MaintenanceService> specifies the operations for DRS backup. The following are the supported values of the < MaintenanceService> parameter:
–scheduleBackup - scheduleBackup service updates an already scheduled DRS backup, which is to be run at a specified time in future.
–startBackup - startBackup service starts a DRS backup instantly.
–getBackupProgress - getBackupProgress service returns the current status of an on-going DRS backup.
Trace Files
In this release of the Disaster Recovery System, trace files for the Master Agent, the GUI, and each Local Agent get written to the following locations:
•For the Master Agent, find the trace file at platform/drf/trace/drfMA0*
•For each Local Agent, find the trace file at platform/drf/trace/drfLA0*
•For the GUI, find the trace file at platform/drf/trace/drfConfLib0*
You can view trace files by using the Command Line Interface. See the Command Line Interface Reference Guide for Cisco Unifed Communications Solutions for more information.
Command Line Interface
The Disaster Recovery System also provides command line access to a subset of backup and restore functions, as shown in Table 3. For more information on these commands and on using the command line interface, see the Command Line Interface Reference Guide for Cisco Unifed Communications Solutions.
Table 3 Disaster Recovery System Command Line Interface
Command
|
Description
|
utils disaster_recovery backup
|
Starts a manual backup by using the features that are configured in the Disaster Recovery System interface
|
utils disaster_recovery restore
|
Starts a restore and requires parameters for backup location, filename, features, and nodes to restore
|
utils disaster_recovery status
|
Displays the status of ongoing backup or restore job
|
utils disaster_recovery show_backupfiles
|
Displays existing backup files
|
utils disaster_recovery cancel_backup
|
Cancels an ongoing backup job
|
utils disaster_recovery show_registration
|
Displays the currently configured registration
|
utils disaster_recovery show_tapeid
|
Displays the tape identification information
|
utils disaster_recovery device add
|
Adds the network or tape device
|
utils disaster_recovery device delete
|
Deletes the device
|
utils disaster_recovery device list
|
Lists all the devices
|
utils disaster_recovery schedule add
|
Adds a schedule
|
utils disaster_recovery schedule delete
|
Deletes a schedule
|
utils disaster_recovery schedule disable
|
Disables a schedule
|
utils disaster_recovery schedule enable
|
Enables a schedule
|
utils disaster_recovery schedule list
|
Lists all the schedules
|
Alarms and Messages
The Disaster Recovery System (DRS) issues alarms and other messages for various errors and other conditions that occur during a backup or restore procedure. Table 4 provides a list of Cisco DRS alarms.
Table 4 Disaster Recovery System Alarms and Messages
Alarm Name
|
Description
|
Explanation
|
DRFBackupDeviceError
|
DRF backup process has problems accessing device.
|
DRS backup process encountered errors while it was accessing device.
|
DRFBackupFailure
|
Cisco DRF Backup process failed.
|
DRS backup process encountered errors.
|
DRFBackupInProgress
|
New backup cannot start while another backup is still running
|
DRS cannot start new backup while another backup is still running.
|
DRFInternalProcessFailure
|
DRF internal process encountered an error.
|
DRS internal process encountered an error.
|
DRFLA2MAFailure
|
DRF Local Agent cannot connect to Master Agent.
|
DRS Local Agent cannot connect to Master Agent.
|
DRFLocalAgentStartFailure
|
DRF Local Agent does not start.
|
DRS Local Agent might be down.
|
DRFMA2LAFailure
|
DRF Master Agent does not connect to Local Agent.
|
DRS Master Agent cannot connect to Local Agent.
|
DRFMABackupComponent
Failure
|
DRF cannot back up at least one component.
|
DRS requested a component to back up its data; however, an error occurred during the backup process, and the component did not get backed up.
|
DRFMABackupNodeDisconnect
|
The node that is being backed up disconnected from the Master Agent prior to being fully backed up.
|
While the DRS Master Agent was running a backup operation on a Cisco Unity Connection node, the node disconnected before the backup operation completed.
|
DRFMARestoreComponent
Failure
|
DRF cannot restore at least one component.
|
DRS requested a component to restore its data; however, an error occurred during the restore process, and the component did not get restored.
|
DRFMARestoreNodeDisconnect
|
The node that is being restored disconnected from the Master Agent prior to being fully restored.
|
While the DRS Master Agent was running a restore operation on a Cisco Unity Connection node, the node disconnected before the restore operation completed.
|
DRFMasterAgentStartFailure
|
DRF Master Agent did not start.
|
DRS Master Agent might be down.
|
DRFNoRegisteredComponent
|
No registered components are available, so backup failed.
|
DRS backup failed because no registered components are available.
|
DRFNoRegisteredFeature
|
No feature got selected for backup.
|
No feature got selected for backup.
|
DRFRestoreDeviceError
|
DRF restore process has problems accessing device.
|
DRS restore process cannot read from device.
|
DRFRestoreFailure
|
DRF restore process failed.
|
DRS restore process encountered errors.
|
DRFSftpFailure
|
DRF SFTP operation has errors.
|
Errors exist in DRS SFTP operation.
|
DRFSecurityViolation
|
DRF system detected a malicious pattern that could result in a security violation.
|
The DRF Network Message contains a malicious pattern that could result in a security violation like code injection or directory traversal. DRF Network Message has been blocked.
|
DRFTruststoreMissing
|
The IPsec truststore is missing on the node.
|
The IPsec truststore is missing on the node. DRF Local Agent cannot connect to Master Agent.
|
DRFUnknownClient
|
DRF Master Agent on the Pub received a Client connection request from an unknown server outside the cluster. The request has been rejected.
|
The DRF Master Agent on the Pub received a Client connection request from an unknown server outside the cluster. The request has been rejected.
|
DRFLocalDeviceError
|
DRF is unable to access local device.
|
DRF is unable to access local device.
|
DRFBackupCompleted
|
DRF backup completed successfully.
|
DRF backup completed successfully.
|
DRFRestoreCompleted
|
DRF restore completed successfully.
|
DRF restore completed successfully.
|
DRFNoBackupTaken
|
DRF did not find a valid backup of the current system.
|
DRF did not find a valid backup of the current system after an Upgrade/Migration or Fresh Install.
|
Related Documentation
For descriptions and URLs of Cisco Unity Connection documentation on Cisco.com, see the Documentation Guide for Cisco Unity Connection Release 9.x. The document is shipped with Connection and is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/roadmap/9xcucdg.html.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2012 Cisco Systems, Inc. All rights reserved.
Feedback
