Command Line Interface Reference Guide - Revised June 30, 2009 - Appendix B: Valid Features [Cisco BTS 10200 Softswitch]

Table Of Contents

Valid Features

Feature Information

General

Office Table Features

Feature List

Feature Profile Base Feature List (Release 4.5)

Feature Type and Value Definitions (Release 4.5)

Feature Configuration Base Types and Values (Release 4.5)

Valid Features

Revised: July 24, 2009, OL-3743-42

This section lists the valid features for this release. The service provider can change the values, star codes, and associated features FNAME1, FNAME2 assigned to the features. See the Cisco BTS 10200 Softswitch System Description for more information.

Caution Always enter feature tokens in uppercase, or you will receive the following message: "Reply: Database is void of entries." For example, enter AC_ACT, not ac_act. Also, feature tokens must be typed with an underscore character (_) or you will receive the following message: "Reply: Database is void of entries." For example, you must enter AC_ACT, not AC-ACT.

Feature Information

This section details additional feature provisioning information.

Note To define features, you must specify a type/value pair. Therefore, to change the values for a feature, issue the change command according to the following example:

change feature fname=OCB; type1=pin-len; value1=5; type2=to; value2=2-; type3=fail-cnt; value3=4; type4=lock-out; value4=60;

General

The following list provides additional general feature provisioning information:

•If a call-agent-id is not configured in the Office Code table, AR, AC and CFNA features will not work.

•The call transfer (CT) feature includes three-way bridging functionality.

•If a subscriber has both call transfer and three-way calling features enabled, then call transfer takes priority.

•Call-Hold (CHD) and Call-Park (CPRK) are Centrex-only features. They are available only to Centrex subscribers.

•For Centrex subscribers: if CHD is assigned CW, CIDCW behaves as CHD. The user is expected to dial the CHD-Star-Code after hookflash to answer a waiting call. A user must hookflash and dial CHD-Star-Code after hookflash to alternate between two calls.

•Features assigned to the main-subscriber of a Centrex or MLH Group are provided to the members of the whole group if the members have the GRP flag set to Y in the Subscriber table. However, this is not applicable to activate or deactivate features. Members of a group must individually activate or deactivate the features, as applicable.

•The Subscriber Feature Data table must be provisioned for hotline and warmline features to work.

•The Call Park Subscriber Group table must be provisioned for the Call Park feature to work.

•SFG control is enabled only if the subscriber is assigned OSFG or ISFG in the Subscriber Service Profile table and the Centrex group table has sfg-control=Y.

Office Table Features

This section provides additional feature provisioning information for office tables.

One service ID (the office service ID) is reserved for provisioning of POP-based features. These office-based features can include certain network features and certain usage-sensitive features, as described below. The service provider provisions the individual features, enters a unique ID in the service table, and provisions this service ID in the POP table. All of the subscribers within the POP are provided with this service (and this set of features).

One service ID (the default office service ID) is reserved for provisioning of switch-based features. The service provider provisions the individual features, enters a unique ID in the service table, and provisions this service ID in the CA-Config table. All of the subscribers on the switch are provided with this service (and this set of features).

Note If the office-service-id is provisioned in the POP table, the system uses this value.
However, if the office-service-id is not provisioned in the POP table, the system uses the default-office-service-id provisioned in the CA-Config table.

Caution The system does not validate or restrict the provisioning of features on the office service ID. However, entries other than the ones listed below will have undefined results. Do not enter features other than the ones listed below.

•The following features can be provisioned with the office-service-id (POP table) and the default-office-service-id (CA-Config table):

–USTWC (For three-way-calling, note that USTWC is the feature that can be included in the office service ID, and TWC is the feature that can be assigned to individual subscribers.)

–COT

–AR_ACT (or AR, if umbrella feature was created)

–AR_DEACT (not needed if umbrella feature AR was created)

–AC_ACT (or AC, if umbrella feature was created)

–AC_DEACT (not needed if umbrella feature AC was created)

–8XX

–LNP

–911

–BLV

–REFER—Valid for SIP subscribers only

•The following features are available, if not subscribed, only if the usage-sensitive (usage-sens) token in the Subscriber table is set to Y:

–USTWC

–COT

–AR_ACT

–AR_DEACT

–AC_ACT

–AC_DEACT

•The system checks both the usage-sens token in the Subscriber table and the type token in the Subscriber Feature Data table for the following features. If the type=denied, the feature is not provided.

–USTWC

–COT

–AC_ACT

–AR_ACT

•The system checks for type=denied for the BLV feature, but it is not restricted by the usage-sens token.

•The system does not check the usage-sens token or if type=denied for the following features:

–911

–LNP

–8XX

Additional RACF-Pin assignment information:

•Assign the RACF_PIN feature only to those RACF subscribers that have unique PINs.

•A unique PIN is identified in the subscriber feature data entry for RACF as PINTYPE=PIN or PINTYPE=NEWPIN. (The NEWPIN type indicates that the subscriber has not yet changed the PIN from the default one assigned by service provider. To use the RACF feature, the subscriber must change the PIN at least once from their home number. Once this is done, the PINTYPE in feature data is changed to PIN).

•Subscribers with a nonunique PIN are not allowed to change it. A nonunique PIN can only be changed through the command line interface by the service provider. For nonunique PIN validation, provision an authcode and set the PINTYPE to AUTHCODE.

•Nonunique PINs are typically assigned to a group of subscribers sharing the same PIN, for example: in a Centrex environment.

Office Service id precedence information:

1. The Cisco BTS 10200 Softswitch first checks the Point of Presence (POP) table to see if an office-service id is provisioned. If an office-service-id is provisioned, and LNP is provisioned in the Service table, then LNP can be triggered regardless of any provisioning in the Call Agent Configuration table.

2. If the office-service id is not provisioned in the POP table, the Cisco BTS 10200 Softswitch checks the default-office-service-id in Call Agent Configuration table. If the default-office-service-id is provisioned and LNP is provisioned in the Service table, then LNP can be triggered.

3. If the office-service id is not provisioned in either the POP table or the Call Agent Configuration table, LNP is not triggered.

Feature List

Table B-1 lists the valid features for the Cisco BTS 10200 Softswitch.

Note The TYPEn and VALUEn information in Table B-1 is valid for Release 4.4.x and earlier. For Releases 4.5.x and later, valid TYPEn and VALUEn values are listed in Table B-2, Feature Profile Base Features. See also the applicable tokens in theFeature table.
Table B-1 List of Features
F
N
A
M
E

TDPn

TIDn

T
T
Y
P
E
1

F
N
A
M
E
1

F
N
A
M
E
2

F
N
A
M
E
3

F
N
A
M
E
4

F
N
A
M
E
5

T
Y
P
E
1

V
A
L
U
E
1

T
Y
P
E
2

V
A
L
U
E
2

T
Y
P
E
3

V
A
L
U
E
3

T
Y
P
E
4

V
A
L
U
E
4

V
A
L
U
E
5

O
f
f
i
c
e

P
O
T
S

C
e
n
t
r
e
x

T
a
n
d
e
m

G
R
P

Description
8XX
COLLECTED_ 
INFORMATION
SPECIFIC_ 
DIGIT_STRING
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Toll-free number.
911
COLLECTED_ 
INFORMATION
911_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Emergency service.
AC
 
 
R
A 
C
_ 
A 
C 
T
A 
C
_ 
D 
E 
A 
C 
T
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic callback.
AC_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic callback 
activation.
AC_ 
DEACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic callback 
deactivation.
ACR
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Anonymous call rejection.
ACR_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Anonymous call rejection 
activation code.
ACR_ 
DEACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Anonymous call rejection 
deactivation code.
ALERT_
NOTIFY 
(Re 
lease 
4.5)
CALL_ 
ACCEPTED
CALL_ 
ACCEPTED_ 
NOTIFY
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Alerting notification to 
third-party feature 
server.
Note The feature identifier (FNAME) can be any unique string of up to 16 ASCII characters chosen by the service provider.
ANI
 
 
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
N
Automatic number 
identification.
AR
 
 
R
A
R
_
A
C
T
A
R
_
D
E
A
C
T
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic recall.
AR_ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic recall 
activation.
AR_ 
DEACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Automatic recall 
deactivation.
BLV
TERMINATION_
ATTEMPT
BLV
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Busy line verification.
CBLK
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Call block—reject caller.
CCW
COLLECTED_ 
INFORMATION
O_MID_CALL 
(Release 
4.5)
T_MID_CALL 
(Release 
4.5)
VERTICAL_ 
SERVICE_CODE
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
(Release 
4.5)
T_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
(Release 
4.5)
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Cancel call waiting.
CDP
COLLECTED_
INFORMATION
CUSTOMIZE_
DIALING_PLAN
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
Y
Customize dial plan.
CFB
T_BUSY
T_EXCEPTION 
(Release 
4.5.1)
T_BUSY
T_NOT_ 
REACHABLE 
(Release 
4.5.1)
R
C
F
B
V
A
C
F
B
V
D
C
F
B
I
 
 
M
C
F
Y
I
N
T
L
N
 
 
 
 
 
 
Y
Y
 
N
Call forwarding busy.
MCF—Multiple call 
forwarding (Default = N). 
Multiple call forwarding 
is enabled by default, but 
can be disabled. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFBI
COLLECTED_
INFORMATION
VERTICAL_
SERVICE_
CODE
R
 
 
 
 
 
S
D
T
N
F
D
T
N
 
 
 
 
 
 
Y
Y
 
N
Call forwarding busy 
interrogation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFBVA
COLLECTED_
INFORMATION
VERTICAL_
SERVICE_CODE
R
 
 
 
 
 
S
D
T
Y
F
D
T
Y
I
N
T
L
N
C
C
N
 
 
Y
Y
 
N
Call forwarding busy 
activation. See Table B-2 
for Release 4.5.x 
TYPEn/VALUEn information.
CFBVD
COLLECTED_
INFORMATION
VERTICAL_
SERVICE_CODE
R
 
 
 
 
 
F
D
T
Y
 
 
 
 
 
 
 
 
Y
Y
 
N
Call forwarding busy 
deactivation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFC 
(Re- 
lease 
4.5)
CALL_ 
ACCEPTED
T_BUSY
CALL_ 
ACCEPTED
T_BUSY
R
C
F
C
_
A
C
T
C
F
C
_
D
E
A
C
T
C
F
C
_
D
N
_
C
H
G
_
A
C
T
C
F
C
I
C
F
C
I
_
N
O
_
D
N
_
V
R
F
Y
 
 
 
 
 
 
 
 
 
 
 
 
 
Call forwarding 
combination. See Table B-2 
for Release 4.5.x 
TYPEn/VALUEn information.
CFC_ 
DN_ 
CHG_ 
ACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call forwarding 
combination DN change with 
activation. See Table B-2 
for Release 4.5.x 
TYPEn/VALUEn information.
CFC_ 
ACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call forwarding 
combination activation. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFC_ 
DEACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call forwarding 
combination deactivation. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFCI 
(Re 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
CFC interrogation with DN 
verification. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFCI_ 
NO_DN_ 
VRFY 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
CFC interrogation with no 
DN verification. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFNA
CALL_ 
ACCEPTED
CALL_ 
ACCEPTED
R
C
F
N
A
V
A
C
F
N
A
V
D
C
F
N
A
I
 
 
T
O
3
0
I
N
T
L
N
M
C
F
Y
 
 
 
 
Y
Y
 
N
Call forwarding no answer.
MCF—Multiple call 
forwarding (Default = N). 
Multiple call forwarding 
is enabled by default, but 
can be disabled.
TO—Timeout period in 
seconds. See Table B-2 for 
Release 4.5.x TYPEn/VALUEn 
information.
CFNAI
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
S
D
T
N
F
D
T
N
 
 
 
 
 
 
Y
Y
 
N
CFNA variable 
interrogation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFNAVA
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
S
D
T
Y
F
D
T
Y
I
N
T
L
N
C
C
N
 
 
Y
Y
 
N
CFNA variable activation. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFNAVD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
F
D
T
Y
 
 
 
 
 
 
 
 
Y
Y
 
N
CFNA variable 
deactivation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFU
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
C
F
U
A
C
F
U
D
C
F
U
I
 
 
R
R
Y
I
N
T
L
N
M
C
F
Y
 
 
Y
Y
 
N
Call forwarding 
unconditional.
MCF—Multiple call 
forwarding allowed. 
Multiple call forwarding 
is enabled by default, but 
can be disabled.
RR—Ring reminder. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFUA
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
I
N
T
L
N
C
C
A
N
S
F
D
T
Y
S
D
T
Y
 
 
Y
Y
 
N
CFU activation.
INTL—CF to international 
directory number (DN). See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFUD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
F
D
T
Y
 
 
 
 
 
 
 
 
Y
Y
 
N
CFU deactivation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFUI
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
S
D
T
N
F
D
T
N
 
 
 
 
 
 
Y
Y
 
N
CFU interrogation. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFV 
ABBG
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
S
D
T
Y
F
D
T
Y
I
N
T
L
N
C
C
N
 
 
 
Y
 
N
Call forwarding variable 
activation for business 
groups. CFVABBG takes 
precedence over CFU. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CFVBBG
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
C
F
V
A
B
B
G
C
F
U
D
C
F
U
I
 
 
M
C
F
Y
R
R
Y
I
N
T
L
N
 
 
 
 
 
Y
 
N
Call forwarding variable 
for business groups. 
CFVBBG takes precedence 
over CFU. See Table B-2 
for Release 4.5.x 
TYPEn/VALUEn information.
CHD
O_MID_CALL 
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
T_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Call hold.
For Centrex users, an 
access code (typically 
provisioned as *52) can be 
used in conjunction with 
the CHD feature.
CIDCW
T_BUSY
T_BUSY
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Caller ID with call 
waiting.
CIDS
 
 
R
C
I
D
S
D
C
I
D
S
S
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling identity delivery 
and suppression per call. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CIDSD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling identity delivery 
and suppression, delivery 
part per call. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CIDSS
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling identity delivery 
and suppression, 
suppression part per call. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CLIP
N-A
N-A
R
C
N
A
M
C
N
D
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Calling line identity 
presentation.
CLIR
N-A
N-A
R
C
N
A
B
C
N
D
B
C
I
D
S
S
C
I
D
S
D
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Calling line identity 
restriction.
CNAB
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling name delivery 
blocking.This feature is 
not supported on SIP 
trunks. See the Cisco BTS 
10200 Softswitch 
Provisioning Guide and 
Release Notes for more 
information. See Table B-2 
for Release 4.5.x 
TYPEn/VALUEn information.
CNAM
FACILITY_ 
SELECTED_AND
_AVAILABLE
TERMINATION_ 
RESOURCE_ 
AVAILABLE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling name.
CND
FACILITY_ 
SELECTED_AND
_AVAILABLE
TERMINATION_ 
RESOURCE_ 
AVAILABLE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling number delivery.
CNDB
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Calling number delivery 
blocking (toggles the 
privacy indicator). See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
COS
COLLECTED_ 
INFORMATION
COS_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
N
Class of service 
screening.
COT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
Y
 
N
Customer-originated trace.
CPRK
O_MID_CALL
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE
T_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Call park access code.
CPRK_ 
RET
 
 
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Call park retrieval access 
code.
CT
O_MID_CALL 
 
 
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
T_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Call transfer.
CW
T_BUSY
T_BUSY
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Call waiting.
CWD
T_BUSY
T_BUSY
R
 
 
 
 
 
T
O
1
5
 
 
 
 
 
 
 
 
Y
Y
 
N
Call waiting deluxe. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
CWDA
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call waiting feature (CW 
and CWD) activation.
CWDD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call waiting feature (CW 
and CWD) deactivation.
CWDI
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Call waiting deluxe. 
interrogation.
DACWI
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Distinctive alerting/call 
waiting on incoming on DID 
calls.
DND
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
D
N
D
_
A
C
T
D
N
D
_
D
E
A
C
T
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Do not disturb.
DND_ 
ACT
COLLECTED_ 
INFORMATION
CUSTOMIZE_ 
DIALING_PLAN
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Do not disturb activation.
DND_ 
DEACT
COLLECTED_ 
INFORMATION
CUSTOMIZE_ 
DIALING_PLAN
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Do not disturb 
deactivation.
DPN
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Directed call pickup with 
barge-in.
DPU
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Directed call pickup.
DRCW
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Distinctive ringing call 
waiting.
DRCW_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
DRCW activation code.
GSC1D
COLLECTED_ 
INFORMATION
SC1D_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
Y
1-digit group speed 
calling.
GSC2D
COLLECTED_ 
INFORMATION
SC2D_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
Y
2-digit group speed 
calling.
HOT 
LINE
O_ATTEMPT_ 
AUTHORIZED
O_ATTEMPT_ 
AUTHD
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Hotline.
HOTV
O_ATTEMPT_ 
AUTHORIZED
O_ATTEMPT_ 
AUTHD
R
H
O
T
V
A
H
O
T
V
D
H
O
T
V
I
 
 
T
O
4
 
 
 
 
 
 
 
 
Y
Y
 
N
Hotline variable. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
HOTVA
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Hotline variable 
activation.
HOTVD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Hotline variable 
deactivation.
HOTVI
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Hotline variable 
interrogation.
ISFG
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Incoming SFG feature for 
Centrex.
IVR
T_ANSWER
T_ANSWER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
N
Internal IVR feature.
LCD 
(Re- 
lease 
4.4.1)
COLLECTED_ 
INFORMATION
LCD_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Limited Call Duration
LNP
COLLECTED_ 
INFORMATION
LNP_TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Local number portability.
MDN
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_ 
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Multiple directory 
numbers. 
For example, teen service.
NSA 
(Re- 
lease 
4.5)
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
No Solicitation 
Announcement feature.
NSA_ 
ACT 
(Re- 
lease 
4.5)
COLLECTED_IN
FORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NSA Management feature.
OCB
COLLECTED_ 
INFORMATION
COS_TRIGGER
R
O
C
B
A
O
C
B
D
O
C
B
I
 
 
P
I
N
_
L
E
N
4
F
A
I
L
_
C
N
T
3
T
O
-
T
O
3
0
 
 
Y
Y
 
N
Outgoing call barring. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
OCBA
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Outgoing call barring 
activation.
OCBD
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Outgoing call barring 
deactivation.
OCBI
COLLECTED_
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Outgoing call barring 
interrogation.
OSFG
ROUTE_ 
SELECTED
ROUTE_ 
SELECTED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
N
Outgoing SFG feature for 
Centrex.
PS 
(Re- 
lease 
4.5)
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Privacy screening (PS) 
feature.
PS_ 
MANAGE 
(Re- 
lease 
4.5)
COLLECTED_
INFORMATION
COLLECTED_
INFORMATION
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PS management feature.
PS_O 
(Re- 
lease 
4.5)
COLLECTED_
INFORMATION
COLLECTED_
INFORMATION
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
N
PS feature assigned to the 
incoming trunk from the PS 
application server.
RACF
T_ANSWER
T_ANSWER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Remote activation of call 
forwarding. RACF is an 
IVR-based function that 
can be used with CFU.
RACF_ 
PIN
COLLECTED_ 
INFORMATION
T_ANSWER
VERTICAL_ 
SERVICE_CODE
T_ANSWER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
RACF PIN change.
RCF
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
C
F
U
 
 
 
 
M
C
F
Y
R
R
N
 
 
 
 
 
 
Y
 
 
N
Remote call forwarding. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
REFER
O_MID_CALL 
 
T_MID_CALL
REFER_ 
TRIGGER 
REFER_ 
TRIGGER
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Refer capability is 
inherent to a SIP phone. 
Refer is used to perform a 
blind or a consultative 
call transfer. This is 
currently defined as a 
basic SIP capability 
available to all SIP 
subscribers and 
provisioned as part of the 
Office Service ID.
SC1D
COLLECTED_ 
INFORMATION
SC1D_TRIGGER
R
S
C
1
D
_
A
C
T
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
1-digit speed calling.
SC1D_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
1-digit speed calling 
aCtivation code.
SC2D
COLLECTED_ 
INFORMATION
SC2D_TRIGGER
R
S
C
2
D
_
A
C
T
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
2-digit speed calling.
SC2D_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
2-digit speed calling 
aCtivation code.
SCA
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Selective call acceptance.
SCA_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
SCA activation code. 
ACA_ACT provides access to 
an IVR server for 
activation, screening list 
setup and editing, and 
deactivation of SCA.
SCF
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Selective call forwarding. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
SCF_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Selective call forwarding 
activation.
SCR
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_
AUTHORIZED
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Selective call rejection.
SCR_ 
ACT
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Selective call rejection 
activation. SCR_ACT 
provides access to an IVR 
server for the activation, 
screening list setup and 
editing, and deactivation 
of SCR.
SLE 
(Re 
lease 
4.5)
 
 
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Screening list editing 
feature. Required for all 
features needing screening 
list functionality.
TWC
O_MID_CALL 
 
 
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
T_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Three-way call.
TWCD
O_MID_CALL 
 
 
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
T_SWITCH_
HOOK_FLASH_ 
IMMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
Y
 
N
Three-way call deluxe.
USTWC
O_MID_CALL 
 
 
T_MID_CALL
O_SWITCH_ 
HOOK_FLASH_ 
IMMEDIATE 
T_SWITCH_ 
HOOK_FLASH_I
MMEDIATE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
N
Usage-sensitive three-way 
call.
VM 
(Re- 
lease 
4.5)
CALL_ 
ACCEPTED
T_BUSY
CALL_ 
ACCEPTED
T_BUSY
R
V
M
_
A
C
T	
T
V
M
_
D
E
A
C
V
M
_
A
C
C
E
S
S
 
 
 
 
 
 
 
 
 
 
 
Y
 
 
 
 
Voice mail feature. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
VM_ 
AC 
CESS 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail access feature.
VMA 
(Re- 
lease 
4.5)
TERMINATION_
ATTEMPT_ 
AUTHORIZED
TERMINATION_
ATTEMPT_ 
AUTHORIZED
R
V
M
_
A
C
T	
T
V
M
_
D
E
A
C
V
M
_
A
C
C
E
S
S
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail always feature. 
See Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
VMA_ 
ACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail always 
activation feature.
VM_ 
ACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail activation 
feature.
VMA_ 
DEACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail always 
deactivation feature.
VM_ 
DEACT 
(Re- 
lease 
4.5)
COLLECTED_ 
INFORMATION
VERTICAL_ 
SERVICE_CODE
R
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Voice mail deactivation 
feature.
WARM 
LINE
O_ATTEMPT_ 
AUTHORIZED
O_ATTEMPT_ 
AUTHD
R
 
 
 
 
 
T
O
4
 
 
 
 
 
 
 
 
Y
Y
 
N
Warmline feature. See 
Table B-2 for Release 
4.5.x TYPEn/VALUEn 
information.
Feature Profile Base Feature List (Release 4.5)

Table B-2 lists the features for the "Feature Profile Base (Release 4.5)" table.

Table B-2 Feature Profile Base Features

FNAME

Feature Name

Type

Datatype

From-
Value

To-
Value

Default

Description

CFB

Call Forwarding Busy

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFB

Call Forwarding Busy

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

CFBI

Call Forwarding Busy interrogation

FDT

STRING

NO_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFBI

Call Forwarding Busy interrogation

SDT

STRING

NO_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFBVA

Call Forwarding Busy Activation

CC

STRING

N

Courtesy call.

CFBVA

Call Forwarding Busy Activation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFBVA

Call Forwarding Busy Activation

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFBVA

Call Forwarding Busy Activation

SDT

STRING

DIAL_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFBVD

Call Forwarding Busy Deactivation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFC

Call Forwarding Combination

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

CFC

Call Forwarding Combination

TO

INTEGER

6

180

30

TO = TIMEOUT PERIOD in seconds.

CFC_ACT

Call Forwarding Combination Activation

FDT

STRING

STUTTER_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFC_DEACT

Call Forwarding Combination Deactivation

FDT

STRING

STUTTER_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFC_DN_
CHG_ACT

Call Forwarding Combination Activation DN Change

CC

STRING

N

Courtesy call.

CFC_DN_
CHG_ACT

Call Forwarding Combination Activation DN Change

FDT

STRING

STUTTER_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFC_DN_
CHG_ACT

Call Forwarding Combination Activation DN Change

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFC_DN_
CHG_ACT

Call Forwarding Combination Activation DN Change

SDT

STRING

DIAL_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFCI

CFC Interrogation with DN Verification

FDT

STRING

NO_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFCI

CFC Interrogation with DN Verification

SDT

STRING

NO_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFCI_NO_
DN_VRFY

CFC Interrogation with no DN Verification

FDT

STRING

NO_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFCI_NO_
DN_VRFY

CFC Interrogation with no DN Verification

SDT

STRING

NO_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFNA

Call Forwarding No Answer

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFNA

Call Forwarding No Answer

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

CFNA

Call Forwarding No Answer

TO

INTEGER

6

180

30

TO = TIMEOUT PERIOD in seconds.

CFNAI

CFNA Variable interrogation

FDT

STRING

NO_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFNAI

CFNA Variable interrogation

SDT

STRING

NO_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFNAVA

CFNA Variable Activation

CC

STRING

N

Courtesy call.

CFNAVA

CFNA Variable Activation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFNAVA

CFNA Variable Activation

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFNAVA

CFNA Variable Activation

SDT

STRING

DIAL_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFNAVD

CFNA Variable Deactivation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFU

Call Forwarding Unconditional

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFU

Call Forwarding Unconditional

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

CFU

Call Forwarding Unconditional

RR

BOOLEAN

Y

Ring reminder.

CFUA

CFU Variable Activation

CC

STRING

ANS

Courtesy call.

CFUA

CFU Variable Activation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFUA

CFU Variable Activation

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFUA

CFU Variable Activation

SDT

STRING

DIAL_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFUD

CFU Variable Deactivation

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFUI

CFU interrogation

FDT

STRING

NO_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFUI

CFU interrogation

SDT

STRING

NO_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFVABBG

Call Forwarding Variable Activation for Business Groups

CC

STRING

N

Courtesy call.

CFVABBG

Call Forwarding Variable Activation for Business Groups

FDT

STRING

CONFIRMATION_DIAL_TONE

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE.

CFVABBG

Call Forwarding Variable Activation for Business Groups

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFVABBG

Call Forwarding Variable Activation for Business Groups

SDT

STRING

DIAL_TONE

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CFVBBG

Call Forwarding Variable for Business Groups

INTL

BOOLEAN

N

Allow forwarding to international numbers (Yes/No).

CFVBBG

Call Forwarding Variable for Business Groups

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

CFVBBG

Call Forwarding Variable for Business Groups

RR

BOOLEAN

Y

Ring reminder.

CIDS

Calling Identity Delivery / Suppression per call

SDT

STRING

STUTTER_DIAL_TONE

Send a second dial tone after star code. Permitted values are

NO_TONE, DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CIDSD

Calling Identity Delivery PER CALL

SDT

STRING

STUTTER_DIAL_TONE

Send a second dial tone after star code. Permitted values are:

NO_TONE, DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CIDSS

Calling Identity Suppression per call

SDT

STRING

STUTTER_DIAL_TONE

Send a second dial tone after star code. Permitted values are:

NO_TONE, DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CNAB

Calling Name Delivery Blocking

SDT

STRING

STUTTER_DIAL_TONE

Send a second dial tone after star code. Permitted values are:

NO_TONE, DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CNDB

Calling Number Delivery Blocking

SDT

STRING

STUTTER_DIAL_TONE

Send a second dial tone after star code. Toggles the Privacy Indicator. Permitted values are:

NO_TONE, DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

CWD

Call Waiting Deluxe

TO

INTEGER

10

30

15

TO = TIMEOUT PERIOD in seconds.

0 indicates no timeout.

HOTV

Hotline Variable

TO

INTEGER

1

15

4

TO = TIMEOUT PERIOD in seconds.

OCB

Outgoing Call Barring

FAIL_
CNT

INTEGER

0

10

3

Fail count

OCB

Outgoing Call Barring

LOCK_
OUT

INTEGER

0

180

30

Lockout period.

0 = Lock-out indefinitely.

OCB

Outgoing Call Barring

PIN_LEN

INTEGER

1

8

4

PIN length

OCB

Outgoing Call Barring

TO

INTEGER

0

180

TO = TIMEOUT PERIOD in minutes.

RCF

Remote Call Forwarding

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

RCF

Remote Call Forwarding

RR

BOOLEAN

N

Ring reminder.

SCF

Selective Call Forwarding

RR

BOOLEAN

Y

Ring reminder.

VM

Voice Mail

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

VM

Voice Mail

TO

INTEGER

1

15

4

TO = TIMEOUT PERIOD in seconds.

VMA

Voice Mail Always

MCF

BOOLEAN

Y

Allow forwarding of multiple simultaneous calls (Yes/No).

VMA

Voice Mail Always

RR

BOOLEAN

Y

Ring reminder.

WARMLINE

Warmline Feature

TO

INTEGER

1

15

4

Warmline feature.

Feature Type and Value Definitions (Release 4.5)

Table B-3 lists the valid feature type and value definitions for the "Feature Profile Base (Release 4.5)" table.

Table B-3 Feature Type-Value Definitions

Type

Definition

Feature

Value

Description

CC

Courtesy call

See the "Feature Profile Base (Release 4.5)" table

ANS

Make a courtesy call (CC) during call forwarding activation. Answer on CC is required to activate call forwarding (CF).

NOANS

Make a courtesy call during call forwarding activation. Answer on CC is not required to activate CF.

N

No courtesy call during call forwarding activation.

BBG

Make a courtesy call during call forwarding activation. Answer on CC is required for CF activation to calls external to BBG, but no answer is required for calls internal to BBG. Applies only to CFVABBG.

FDT

Final Dial Tone

See the "Feature Profile Base (Release 4.5)" table

See description.

Send a final dial tone after a confirmation tone. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

FAIL-
CNT

Number of consecutive failures allowed before service is locked.

OCB

0

0—indicates no service lockout.

Range: 1-10

Number of invalid attempts to activate or deactivate OCB before service is locked out.

INTL

International Call Forwarding allowed or not.

See the "Feature Profile Base (Release 4.5)" table

Y

Allows forwarding to international numbers.

N

Do not allow forwarding to an international number.

LOCK-
OUT

Lockout period for OCB feature

OCB

Range 0-180

Lockout period in minutes.

0

Lock out indefinitely. Requires a service order to unlock.

Range: 1-180

The service is locked out for activation or deactivation for the lockout period after the FAIL-CNT reaches the specified threshold. The lockout period begins after the last failed attempt.

MCF

Multiple Call Forwarding—Indicates if multiple call forwarding is allowed when CFU is encountered. By default only 1 call at a time can be forwarded from any subscriber.

See the "Feature Profile Base (Release 4.5)" table

Y

Allow forwarding of multiple simultaneous calls.

N

Allow forwarding of only one call at a time.

PIN-LEN

Pin length for OCB feature

OCB

Range: 4-12

Specifies the pin length.

RR

Ring reminder—Indicates whether to provide a splash ring when a call is forwarded.

See the "Feature Profile Base (Release 4.5)" table

Y

Send a splash ring if phone is idle when a call is forwarded as a result of call forwarding.

N

Do not send a splash ring.

SDT

Second Dial Tone

See the "Feature Profile Base (Release 4.5)" table

See description.

Send a second dial tone after a star code. Permitted values are:

NO_TONE
DIAL_TONE
STUTTER_DIAL_TONE
CONFIRMATION_TONE
CONFIRMATION_DIAL_TONE

TO

Timeout

CFNA

Range: 6-180

Number of seconds to ring a telephone before forwarding. 6 seconds is equivalent to 1 ring.

Timeout

WARM
LINE

Range: 1-15

Number of seconds for dial tone timeout for warmline feature.

Timeout—Number of minutes before the service is unlocked (see FAIL-CNT).

OCB

0

Failures are ignored.

Range: 1-180

Tracks the number of consecutive failures in minutes within the TO time span. The time span begins with the first failure.

Feature Configuration Base Types and Values (Release 4.5)

Table B-4 lists the types and values for the "Feature Configuration Base (Release 4.5)" table.

Table B-4 Feature Configuration Base Table Types and Values

Add

Fname

Type

Datatype

From

To

CHK-POS-Values

Default

Description

# IVR based COS Feature

COS

FDT-
TIMER

INTEGER

10

100

N

40

First digit timer for AUTH/ACCT collection in tenths of a second.

Note To determine the correct value, use the following formula as a guide: 100 times 1/10 = 10 seconds. In this case, specify 100 to enter a 10 second interval.

COS

IDT-TIMER

INTEGER

10

100

N

40

Inter-digit timer for AUTH/ACCT collection in tenths of a second.

Note To determine the correct value, use the following formula as a guide: 100 times 1/10 = 10 seconds. In this case, specify 100 to enter a 10 second interval.

# IVR based NSA Feature

NSA

FDT-
TIMER

INTEGER

10

100

N

40

First digit timer for AUTH/ACCT collection in tenths of a second.

Note To determine the correct value, use the following formula as a guide: 100 times 1/10 = 10 seconds. In this case, specify 100 to enter a 10 second interval.

NSA

IDT-TIMER

INTEGER

10

100

N

40

Inter-digit timer for AUTH/ACCT collection in tenths of a second.

Note To determine the correct value, use the following formula as a guide: 100 times 1/10 = 10 seconds. In this case, specify 100 to enter a 10 second interval.

NSA

INVOKE-
DIGITS

DIGITS

N

1

Invoke digit(s) for NSA feature.

NSA

RESTART-
KEY

STRING

N

*

Restart key to erase the entered digits and restart entering digits.

NSA

RETURN-KEY

STRING

N

#

Return key to signal that all digits are entered. Do not wait for IDT-TIMER.

# For IVR based NSA Activation (NSA-ACT)

# Authentication

NSA-ACT

AUTH-
ENABLED

BOOLEAN

N

Y

Specifies whether to enable authentication.

NSA-ACT

AUTH-
REPLAY-
PIN-OP-
CONFIRM

DIGITS

N

1

Operation key to confirm the PIN.

NSA-ACT

AUTH-
REPLAY-
PIN-OP-
REENTER

DIGITS

N

2

Operation key to reenter the PIN.

# NSA_ACT ATimer and Reattempts

NSA-ACT

REPEAT-
INSTRUCT
ION

DIGITS

N

0

Operations key to repeat instructions.

NSA-ACT

RESTART-
KEY

STRING

N

*

Restart key to erase the entered digits and restart entering digits.

NSA-ACT

RETURN-KEY

STRING

N

#

Return key to signal that all digits are entered. Do not wait for IDT-TIMER.

NSA-ACT

NUM-
ATTEMPTS

INTEGER

1

5

N

3

Specifies the number of attempts to request a valid response. This allows the IVR server to control flow appropriately.

Note The recommended value is 1.

NSA-ACT

T-SESSION

INTEGER

300

1200

N

600

Session timer in tenths of a second. The session times out after this amount of idle time during an activation session.

Note To determine the correct value, use the following formula as a guide: 1200 times 1/10 = 120 seconds. In this case, specify 1200 to enter a 120 second interval.

# For NSA-ACT Time-of-day (TOD) Management

NSA-ACT

TOD-
ENABLED

BOOLEAN

N

*

Specifies whether to enable the TOD management function for a subscriber. When enabled, the subscriber can manage the TOD feature using the handset.

NSA-ACT

TOD-SET-
OLD

DIGITS

N

1

Operations key to set the schedule to the old record.

NSA-ACT

TOD-SET-
NEW

DIGITS

N

2

Operations key to set a new schedule.

# For NSA-ACT SLE
# Timer and reattempts

SLE

T1-TIMER

INTEGER

20

100

N

40

Specifies in tenths of a second how long the SPCS waits for a customer to confirm an existing remote DN or indicate that the remote DN should be changed. T1 is settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds.

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

T2-TIMER

INTEGER

20

100

N

40

Specifies in tenths of a second how long the SPCS waits for a customer to specify a new remote DN. T2 defines how long the SPCS waits for the customer to specify a new remote DN.

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

T3-TIMER

INTEGER

20

100

N

40

Specifies in tenths of a second how long the SPCS waits for a customer to specify "#", "12", or "0" when a DN must be added to the list during feature activation. T3 is settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds.

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

T4-TIMER

INTEGER

20

100

N

40

Specifies in tenths of a second how long the SPCS waits for a customer to specify a DN when adding or deleting an entry. T4 is settable between 2 and 10 seconds with an interval of 1 second and a suggested value of 4 seconds.

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

T5-TIMER

INTEGER

20

40

N

30

Specifies in tenths of a second how long the originating SPCS waits for a response to the initial query sent to the screened DN's SPCS. T5 is settable between 2 and 4 seconds with an interval of 1 second and a suggested value of 3 seconds.

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

T6-TIMER

INTEGER

20

40

N

35

Specifies in tenths of a second how long the SPCS waits for the customer to specify an option after an entry on the list is voiced back during list review. For DTMF customers, T6 is settable between 2 and 3 seconds with an interval of 0.5 second and a suggested value of 2.5 seconds. For dial pulse customers, it is settable between 3 and 4 seconds with an interval of 0.5 second and a suggested value of 3.5 seconds

Note (Note: dial pulse capability is dependant on the gateway. The dial pulse default values are used.)

Note To determine the correct value, use the following formula as a guide: 20 times 1/10 = 2 seconds. In this case, specify 20 to enter a 2 second interval.

SLE

IDT-TIMER

INTEGER

20

90

N

40

Interdigit timer. The interdigit timing is settable between 2 and 9 seconds with an interval of 1 second and a suggested value of 4 seconds.

# SLE Non-GR-220 Reattempts and Session Timer

SLE

NUM-
ATTEMPTS

INTEGER

1

5

N

30

Specifies the number of attempts to request a valid response. This allows the IVR server to control flow appropriately.

Note Recommended value is 1.

SLE

T-SESSION

INTEGER

300

1200

N

600

Default session timer in tenths of a second. The session times out after this amount of idle time during an SLE session. Not in GR-220.

# GR-220 Operation Keys

SLE

REPEAT-INSTRUCTION

DIGITS

N

0

Operations key to go to the repeat instruction menu.

SLE

LIST-REVIEW

DIGITS

N

1

Operations key to go to the list review menu.

SLE

TOD

DIGITS

N

2

Operations key to go to the TOD menu, not in GR-220.

SLE

CHANGE-
STATUS

DIGITS

N

3

Operations key to go to the change status menu.

SLE

ADD-ENTRY

DIGITS

N

#

Operations key to go to the add entry menu.

SLE

DELETE-
ENTRY

DIGITS

N

*

Operations key to go to the delete entry menu.

SLE

ADD-ENTRY-RETURN-KEY

DIGITS

N

*

Return key for the add entry procedure.

SLE

DELETE-
ENTRY-
RETURN-KEY

DIGITS

N

#

Return key for the delete entry procedure.

SLE

LAST-
CALLING-
PARTY

DIGITS

N

01

Operations key for the last calling party.

SLE

INTERCOM-
DIALING-
CODE

DIGITS

N

02

Operations key for the extension.

SLE

WILDCARD

DIGITS

N

03

Operations key for the wildcard

SLE

DELETE-
VOICED-
BACK-
ENTRY

DIGITS

N

07

Operations key to delete the voiced back entry.

SLE

DELETE-
ALL-
ENTRIES

DIGITS

N

08

Operations key to delete all entries.

SLE

DELETE-
ALL-ANONYMOUS-
ENTRIES

DIGITS

N

09

Operations key to delete all anonymous entries.

SLE

LIST-
EDITING-
RETURN-
KEY

DIGITS

Y

*#

Return key. Both an asterisk (*) and the number sign (#) are valid

# Call Forwarding Busy on Unreachable

CFB

FORWARD-
ON-
UNREACH
ABLE

BOOLEAN

N

Y

Forward calls by CFB when the subscriber is unreachable.

# Privacy Screening Feature for ACR and PS

PS

PRIVACY-
UNKNOWN-TREAT
MENT

STRING

Y

PUBLIC

Specifies whether to treat an incoming call with unknown privacy received, no privacy received, or no calling party information received, as public or anonymous.

ACR

PRIVACY-
UNKNOWN-TREAT
MENT

STRING

Y

PUBLIC

Specifies whether to treat an incoming call with unknown privacy received, no privacy received, or no calling party information received, as public or anonymous..

# Wakeup Call (Release 4.5.1) (Not supported)

WKUP

WKUP_
RINGTIME

INTEGER

1

180

N

120

Specifies, in seconds, how many times the wake call rings.

WKUP

WKUP_
ATTEMPTS

INTEGER

1

4

N

2

Specifies the number of wakeup attempts.

WKUP

WKUP_
INTERVAL

INTEGER

1

20

N

10

Specifies the wakeup interval in minutes. The interval is the time between the end of one attempt and the beginning of the next attempt.

WKUP

WKUP_
TCLSCRIPT

STRING

N

Specifies the TCL script file name for the media server to play.