 Feedback
|
Table Of Contents
Release Notes for Cisco UCS Virtual Interface Card Drivers, Release 2.2
New Software Features in Release 2.2
Known Limitations and Behaviors
Related Cisco UCS Documentation
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco UCS Virtual Interface Card Drivers, Release 2.2
First Published: December 12, 2013Part Number: OL-31142-01Introduction
This release note discusses the new features, known limitations, and open caveats for Cisco UCS Virtual Interface Card (VIC) Drivers, Release 2.2. It does not cover new features, resolved and open caveats for third-party drivers, and known limitations.
Note
We sometimes update the documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
Use this document in conjunction with the document listed in the Related Documentation section.
Table 1 shows the online change history for this document.
Table 1 Online Revision History
OL-31142-01
A0
December 12, 2013
Created the release notes document.
System Requirements
For a complete list of supported hardware and software, see the Hardware and Software Interoperability Matrix for this release located at: http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
New Software Features in Release 2.2
Release 2.2.(1), December 12, 2013
The Release 2.2(1) adds support for the following features:
•
•
•
•
Operating System Support
For complete information about the operating systems that Release 2.2 supports, see the Hardware and Software Interoperability for UCSM Managed Servers document for each Release 2.2 release located here:
http://www.cisco.com/en/US/partner/products/ps10477/prod_technical_reference_list.htmlResolved Caveats
Table 2 lists the caveats that have been resolved since Release 2.1(2).
Open Caveats
Table 3 lists the open caveats in Release 2.2.
Customers using Red Hat Enterprise Linux version 5.8 or an earlier version should be aware that a libfc bug exists in distributions. The details of this bug are available in the Red Hat Bugzilla 884740.
Known Limitations and Behaviors
There are no known limitations in this release.
Related Cisco UCS Documentation
Documentation Roadmaps
For a complete list of all B-Series documentation, see the Cisco UCS B-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/b-series-doc.
For a complete list of all C-Series documentation, see the Cisco UCS C-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/c-series-doc
Other Documentation Resources
An ISO file containing all B and C-Series documents is available at the following URL: http://software.cisco.com/download/type.html?mdfid=283853163&flowid=25821. From this page, click Unified Computing System (UCS) Documentation Roadmap Bundle.
The ISO file is updated after every major documentation release.
Follow Cisco UCS Docs on Twitter to receive document update notifications.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Cisco UCS Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011-2013 Cisco Systems, Inc. All rights reserved.
