What can I do with the in call menu on the Cisco TelePresence MCU?
This article applies to the following products, when running software version 4.3 or later:
- Cisco TelePresence MCU 4200 Series
- Cisco TelePresence MCU 4500 Series
- Cisco TelePresence MCU 5300 Series
- Cisco TelePresence MCU MSE Series
The following table is a quick reference to all the functions available via the in call menu when the conference is hosted on a Cisco TelePresence MCU, running version 4.3 (or later) of the Cisco TelePresence MCU application.
For more detail on using the in call menu, refer to Cisco TelePresence Accessing Conferences Getting started guide MCU 4.3.
| Function | Numeric sequence | Menu sequence |
|---|---|---|
| Request/release the floor (for my use) | *11 |
My actions > Request floor My Actions > Release floor |
| Mute/unmute my audio | *12 |
My actions > Mute my audio My actions > Unmute my audio |
| Stop/start my video | *13 |
My actions > Stop my video My actions > Start my video |
| Return to the auto attendant | *14
|
My actions > Request floor |
| Change layout | *15, cycle through layouts (8 or 2) or focus participants (4 or 6) |
My actions > Change layout > Next/Previous layout view
My actions > Change layout > Focus on next/previous participant |
| Change/remove border | *191
|
My actions > More actions > Increase border
My actions > More actions > Remove border |
| Clear text chat | *192 |
My actions > More actions > Clear text chat |
| Enable/disable widescreen mode | *193
|
My actions > More actions > Widescreen mode (off) My actions > More actions > Widescreen mode (on) |
| Show the participant list | *2 |
Participants |
| Assign the floor to another participant | *2, select participant, 1 |
Participants > <name> > Assign floor |
| Mute/unmute another participant's audio | *2, select participant, 2 |
Participants > <name> > Mute audio Participants > <name> > Unmute audio |
| Stop/start another participant's video | *2, select participant, 3 |
Participants > <name> > Stop video Participants > <name> > Start video |
| Send a keypad sequence to another participant | *2, select participant, 4, sequence, ## |
Participants > <name> > Keypad > <sequence> > More > Send |
| Increase another participant's audio level | *2, select participant, 5 |
Participants > <name> > Make louder |
| Decrease another participant's audio level | *2, select participant, 6 |
Participants > <name> > Make quieter |
| Enable/Disable AGC for another participant | *2, select participant, 7 |
Participants > <name> > Enable AGC Participants > <name> > Disable AGC |
| Disconnect another participant | *2, select participant, 8 |
Participants > <name> > Disconnect this endpoint |
| Mute all other participants' audio | *31 |
Conference actions > Mute others' audio |
| Unmute all other participants' audio | *32 |
Conference actions > Unmute others' audio |
| Lock/unlock the conference | *33
|
Conference actions > Lock conference Conference actions > Unlock conference |
| Release the floor (from whomever currently holds it) | *34 |
Conference actions > Release floor |
| Disconnect all participants | *351
|
Conference actions > Disconnect all > Disconnect all |
| Add a participant | *36, enter address, ## |
Conference actions > Add participant > <address> > More > Call |
| Add/change/clear the chair PIN | *41
|
Conference settings > Add PIN Conference settings > Change PIN |
| Add/change/clear the guest PIN | *42
|
Conference settings > Add guest PIN Conference settings > Change guest PIN |
| Mute/unmute my audio | *6 |
Mute audio Unmute audio |
| April 2nd, 2013 | TAA_KB_691 |