 Feedback
|
How to call an IP address using Cisco Jabber Video for TelePresence
To call an IP address, use the format jabbervideo@<ipaddress>. For example, to call an endpoint registered to the IP address 10.47.27.27, dial jabbervideo@10.47.27.27
Note: Some endpoints require a username when they receive a call. To call these endpoints, use the format <username>@<ipaddress>, where <username> is the username of the person you are calling.
This article applies to the following products:
- Cisco Jabber Video for TelePresence
| January 13th, 2012 | TAA_KB_472 |