Table Of Contents

CTRS Show Commands

show account

show activesessions all

show activesessions both

show activesessions recordings

show activesessions replays

show cli pagination

show diskalertthreshold

show diskusage activelog

show diskusage common

show diskusage inactivelog

show diskusage install

show diskusage tmp

show diskspace left

show diskspace used

show hardware

show hdcapable

show ldcapable

show logins

show mediasecurity

show myself

show network all

show network dhcp eth0 status

show network eth0

show network failover

show network ip_conntrack

show network ipprefs all

show network ipprefs enabled

show network ipprefs public

show network max_ip_conntrack

show network route

show network status

show open files all

show open files process

show open files regexp

show open ports all

show open ports regexp

show packages

show process list

show process load

show process name

show process open-fd

show process pid

show process search

show process user

show process using-most cpu

show process using-most memory

show recordedquality

show refreshrate

show snmp trapdests

show snmp users

show stats io

show status

show syslog facility

show syslog heartbeat facility

show syslog heartbeat interval

show syslog heartbeat msg

show syslog heartbeat severity

show syslog timezone

show syslog version

show tech all

show tech network all

show tech network hosts

show tech network interfaces

show tech network resolv

show tech network routes

show tech network sockets

show tech runtime all

show tech runtime cpu

show tech runtime disk

show tech runtime env

show tech runtime memory

show tech system all

show tech system bus

show tech system hardware

show tech system host

show tech system kernel modules

show tech system software

show tech system tools

show timezone

show users

show version

show videoquality

show workingdir

CTRS Show Commands

---

September 2010

This chapter contains Cisco TelePresence Recording Server (CTRS) show commands:

•show account

•show activesessions all

•show activesessions both

•show activesessions recordings

•show activesessions replays

•show cli pagination

•show diskalertthreshold

•show diskusage activelog

•show diskusage common

•show diskusage inactivelog

•show diskusage install

•show diskusage tmp

•show diskspace left

•show diskspace used

•show hardware

•show hdcapable

•show ldcapable

•show logins

•show mediasecurity

•show myself

•show network all

•show network dhcp eth0 status

•show network eth0

•show network failover

•show network ip_conntrack

•show network ipprefs all

•show network ipprefs enabled

•show network ipprefs public

•show network max_ip_conntrack

•show network route

•show network status

•show open files all

•show open files process

•show open files regexp

•show open ports all

•show open ports regexp

•show packages

•show process list

•show process load

•show process name

•show process open-fd

•show process pid

•show process search

•show process user

•show process using-most cpu

•show process using-most memory

•show recordedquality

•show refreshrate

•show snmp trapdests

•show snmp users

•show stats io

•show status

•show syslog facility

•show syslog heartbeat facility

•show syslog heartbeat interval

•show syslog heartbeat msg

•show syslog heartbeat severity

•show syslog timezone

•show syslog version

•show tech all

•show tech network all

•show tech network hosts

•show tech network interfaces

•show tech network resolv

•show tech network routes

•show tech network sockets

•show tech runtime all

•show tech runtime cpu

•show tech runtime disk

•show tech runtime env

•show tech runtime memory

•show tech system all

•show tech system bus

•show tech system hardware

•show tech system host

•show tech system kernel modules

•show tech system software

•show tech system tools

•show timezone

•show users

•show version

•show videoquality

•show workingdir

---

Note For information about using the CTRS administration software, refer to the Cisco TelePresence Recording Server Release 1.7 Administration Guide at the following URL:

http://www.cisco.com/en/US/products/ps10341/prod_maintenance_guides_list.html

---

show account

show account

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display a list of all administrative accounts except for the master administrator account.

Examples

admin:show account

Name = test, Privilege = 1

show activesessions all

show activesessions all

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all active recordings and replays.

Examples

admin:show activesessions all

Setting active types to all

*************Active Call(s) *************

*******************************************

show activesessions both

show activesessions both

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all active bidirectional sessions.

Examples

admin:show activesessions both

Setting active types to bidirectional

*************Active Call(s) *************

*******************************************

show activesessions recordings

show activesessions recordings

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all active recordings.

Examples

admin:show activesessions recordings

Setting active types to recordings

*************Active Call(s) *************

*******************************************

show activesessions replays

show activesessions replays

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all active replays.

Examples

admin:show activesessions replays

Setting active types to replays

*************Active Call(s) *************

*******************************************

show cli pagination

show cli pagination

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to check the status of automatic pagination.

Examples

admin: show cli pagination

Automatic Pagination : Off

show diskalertthreshold

show diskalertthreshold

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to show the disk percent usage that will trigger an alert to an administrator.

Examples

admin: show diskalertthreshold

Disk Alert Threshold: 80

Alert Admin at Email:

show diskusage activelog

show diskusage activelog [file fname] [directory] [sort]

Syntax Description

file fname	Save output in a file format.
directory	View directory sizes only, in 1024 byte blocks.
sort	Sort output by size.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the active log directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples

admin:show diskusage activelog 

This command can take significantly long time,

and can also effect the system wide IOWAIT on your system.

Continue (y/n)?

show diskusage common

show diskusage common [file fname] [directory] [sort]

Syntax Description

file fname	Save output in a file format.
directory	View directory sizes only, in 1024 byte blocks.
sort	Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the common directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples

admin:show diskusage common

This command can take significantly long time,

and can also effect the system wide IOWAIT on your system.

Continue (y/n)

show diskusage inactivelog

show diskusage inactivelog [file fname] [directory] [sort]

Syntax Description

file fname	Save output in a file format.
directory	View directory sizes only, in 1024 byte blocks.
sort	Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the inactive directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view inactivelog command.

Examples

admin:show diskusage inactivelog 

This command can take significantly long time,

and can also effect the system wide IOWAIT on your system.

Continue (y/n)?

show diskusage install

show diskusage install [file fname] [directory] [sort]

Syntax Description

file fname	Save output in a file format. The file will be saved as platform/cli/fname.
directory	View directories only in 1024 byte blocks.
sort	Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the install directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view install command.

Examples

admin:show diskusage install

This command can take significantly long time,

and can also effect the system wide IOWAIT on your system.

Continue (y/n)?

show diskusage tmp

show diskusage tmp [file fname] [directory] [sort]

Syntax Description

file fname	Save output in a file format. The file will be saved as platform/cli/fname.
directory	View directories only in 1024 byte blocks.
sort	Sort output by size in 1024 byte blocks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the temporary directories as well as the usage of the disk partition on which they exist. You can view the saved output file by using the file view activelog command.

Examples

admin:show diskusage tmp

This command can take significantly long time,

and can also effect the system wide IOWAIT on your system.

Continue (y/n)?

show diskspace left

show diskspace left

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the amount of media diskspace left.

Examples

admin:show diskspace left

Disk Space: 621G

show diskspace used

show diskspace used

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the amount of media diskspace used.

Examples

admin:show diskspace used

Disk Space: 18G

show hardware

show hardware

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display basic platform hardware information.

Examples

admin:show hardware

HW Platform       : 7845H2

Processors        : 2

Type              : Family: Xeon

CPU Speed         : 2333

Memory            : 4096 MBytes

Object ID         : 1.3.6.1.4.1.9.1.586

OS Version        : UCOS 4.0.0.0-27

Serial Number     : 2UX90700FN

RAID Version      :

RAID Firmware Version:  5.26

RAID BIOS Version: N/A

BIOS Information  :

11/01/2008

RAID Details      :

Smart Array P400 in Slot 1

   Bus Interface: PCI

   Slot: 1

   Serial Number: PAFGK0P9VWS6D8

   Cache Serial Number: PA82C0J9SWV3HL

   RAID 6 (ADG) Status: Enabled

   RAID 6 (ADG) Enabler Status: Enabled

   Controller Status: OK

   Chassis Slot: 

   Hardware Revision: Rev E

   Firmware Version: 5.26

   Rebuild Priority: Medium

   Expand Priority: Medium

   Surface Scan Delay: 3 sec

   Cache Board Present: True

   Cache Status: OK

   Accelerator Ratio: 50% Read / 50% Write

   ...

show hdcapable

show hdcapable

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display if HD video recording is enabled.

Examples

admin:show hdcapable

HD Capability: Enabled

show ldcapable

show ldcapable

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display if LD video recording is enabled.

Examples

admin:show ldcapable

CIF Capability: Enabled

show logins

show logins [number]

Syntax Description

number

The optional parameter can be used to specify the number of displayed logins. A value of 0 will display all previously saved logins. The default is 20.

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display the last 20 platform admin logins.

Examples

admin:show logins

admin    pts/0        dhcp-171-70-13-1 Tue Dec  1 16:05   still logged in

root     pts/0        pnmars-61.cisco. Tue Dec  1 05:53 - 10:45  (04:52)

show mediasecurity

show mediasecurity

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display the configured box-level security for media.

Examples

admin:show mediasecurity

show myself

show myself

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display information about the current account. The CLI "set commandcount" and "set logging" commands can be used to modify current account settings.

Examples

admin:show myself

Machine Name    : tsbu-ctrs-dev6

account name    : admin

privilege level : 4

command count   : disabled

logging setting : disabled

show network all

show network all

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display all basic platform network information.

---

Note You can use the search option to selectively display the output.

---

Examples

admin:show network all

Ethernet 0

DHCP         : disabled           Status     : up

IP Address   : 172.28.70.109      IP Mask    : 255.255.252.0

Link Detected: yes                Mode       : Auto enabled, Full, 1000 Mbits/s

Duplicate IP : no

DNS

Primary      : 171.70.168.183     Secondary  : Not Configured

Options      : timeout:5 attempts:2

Domain       : cisco.com

Gateway      : 172.28.68.1 on Ethernet 0

172.28.68.0/22 dev eth0  proto kernel  scope link  src 172.28.70.109 

169.254.0.0/16 dev eth0  scope link 

default via 172.28.68.1 dev eth0 

Active Internet connections (servers and established)

Proto Recv-Q Send-Q Local Address               Foreign Address             State      

tcp        0      0 localhost:3873              *:*                         LISTEN      

tcp        0      0 *:12102                     *:*                         LISTEN      

tcp        0      0 localhost:8999              *:*                         LISTEN      

tcp        0      0 *:12104                     *:*                         LISTEN      

tcp        0      0 *:5001                      *:*                         LISTEN      

tcp        0      0 *:8009                      *:*                         LISTEN      

tcp        0      0 *:32777                     *:*                         LISTEN      

tcp        0      0 *:32778                     *:*                         LISTEN      

tcp        0      0 localhost:1098              *:*                         LISTEN      

tcp        0      0 *:32780                     *:*                         LISTEN      

tcp        0      0 *:61455                     *:*                         LISTEN      

tcp        0      0 *:webcache                  *:*                         LISTEN      

tcp        0      0 *:61456                     *:*                         LISTEN      

tcp        0      0 *:61457                     *:*                         LISTEN      

tcp        0      0 localhost:8083              *:*                         LISTEN      

...

show network dhcp eth0 status

show network dhcp eth0 status

Command Modes

Admin

Command History

Release	Modifications
1.6	The command was first documented.

Usage Guidelines

Use this command to display the DHCP status for eth0.

Examples

admin:show network dhcp eth0 status

DHCP is disabled for eth0

Host ip address: 192.0.2.0

Net mask: 255.255.255.0

Gateway: 192.0.2.255

show network eth0

show network eth0

Syntax Description

None

Command Modes

Admin

Command History

Release	Modification
1.6	The command was first documented.

Usage Guidelines

Use this command to display some basic platform network information about eth0.

---

Note You can use the search option to selectively display the output.

---

Examples

admin:show network eth0 

Ethernet 0

DHCP         : disabled           Status     : up

IP Address   : 172.28.70.109      IP Mask    : 255.255.252.0

Link Detected: yes                Mode       : Auto enabled, Full, 1000 Mbits/s

Duplicate IP : no

DNS

Primary      : 171.70.168.183     Secondary  : Not Configured

Options      : timeout:5 attempts:2

Domain       : cisco.com

Gateway      : 172.28.68.1 on Ethernet 0

show network failover

show network failover

Syntax Description

None

Command Modes

Admin

Command History

Release	Modification
1.6	This command was first documented.

Usage Guidelines

Use this command to display NIC Teaming network fault tolerance information.

Examples

admin:show network failover 

Network Fault Tolerance is not configured.

show network ip_conntrack

show network ip_conntrack

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the current utilization of ip_conntrack.

Examples

admin:show network ip_conntrack

35

show network ipprefs all

show network ipprefs all

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that may be used on the product.

Examples

admin:show network ipprefs all

Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  

------------ ------------ ------------ ------------ ------------ ------------ ------------ 

sshd         tcp          22           public       -            enabled      sftp and ssh 
access 

racoon       esp          -            public       -            disabled     ipsec 
traffic 

racoon       udp          500          public       -            disabled     ipsec setup 
port 

tomcat       tcp          8443         translated   443          enabled      secure web 
access 

tomcat       tcp          8080         translated   80           enabled      web access   

ntpd         udp          123          public       -            enabled      network time 
sync 

dhcp6c       udp          546          public       -            disabled     DHCPv6 
client 

netdump      udp          6666         public       -            disabled     this port 
needs to be open on systems running the netdump server 

database     tcp          1533         public       -            enabled      database 
partA port 

database     tcp          1534         public       -            disabled     database 
partB port 

snmp         udp          161          public       -            disabled     snmp port    

jboss        tcp          1044         public       -            disabled     jboss debug 
port 

ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 

ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 

...

show network ipprefs enabled

show network ipprefs enabled

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that are currently opened.

Examples

admin:show network ipprefs enabled

Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  

------------ ------------ ------------ ------------ ------------ ------------ ------------ 

sshd         tcp          22           public       -            enabled      sftp and ssh 
access 

tomcat       tcp          8443         translated   443          enabled      secure web 
access 

tomcat       tcp          8080         translated   80           enabled      web access   

ntpd         udp          123          public       -            enabled      network time 
sync 

database     tcp          1533         public       -            enabled      database 
partA port 

ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 

ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 

show network ipprefs public

show network ipprefs public

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all incoming ports that are currently opened for any remote client.

Examples

admin:show network ipprefs public

Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  

------------ ------------ ------------ ------------ ------------ ------------ ------------ 

sshd         tcp          22           public       -            enabled      sftp and ssh 
access 

tomcat       tcp          8443         translated   443          enabled      secure web 
access 

tomcat       tcp          8080         translated   80           enabled      web access   

ntpd         udp          123          public       -            enabled      network time 
sync 

database     tcp          1533         public       -            enabled      database 
partA port 

ALL          tcp          32768:61000  public       -            enabled      generic 
ephemeral tcp ports 

ALL          udp          32768:61000  public       -            enabled      generic 
ephemeral udp ports 

show network max_ip_conntrack

show network max_ip_conntrack

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display ip_conntrack_max information.

Examples

admin:show network max_ip_conntrack

65536

show network route

show network route

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display some basic platform network route information.

---

Note You can use the search option to selectively display the output.

---

Examples

admin:show network route

172.28.68.0/22 dev eth0  proto kernel  scope link  src 172.28.70.109 

169.254.0.0/16 dev eth0  scope link 

default via 172.28.68.1 dev eth0

show network status

show network status [search name]

Syntax Description

search name

Optional search feature, The variable name is a text string indicating network. String cannot contain spaces or tabs and is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display basic platform network status information.

Examples

admin:show network status

Active Internet connections (w/o servers)

Proto Recv-Q Send-Q Local Address               Foreign Address             State      

tcp        0      0 tsbu-ctrs-dev6.cisco.:41626 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

tcp        0      0 tsbu-ctrs-dev6.cisco.:41627 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

tcp        0      0 tsbu-ctrs-dev6.cisco.:41624 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

Active UNIX domain sockets (w/o servers)

Proto RefCnt Flags       Type       State         I-Node Path

unix  3      [ ]         DGRAM                    7948   /dev/log2

unix  2      [ ]         DGRAM                    28530 

Example with optional search feature:

admin:show network status cisco.com

Active Internet connections (w/o servers)

Proto Recv-Q Send-Q Local Address               Foreign Address             State      

tcp        0      0 tsbu-ctrs-dev6.cisco.:41626 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

tcp        0      0 tsbu-ctrs-dev6.cisco.:41627 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

tcp        0      0 tsbu-ctrs-dev6.cisco.:41624 tsbu-ct:tsbu_ctrs_dev6_ctis ESTABLISHED 

Active UNIX domain sockets (w/o servers)

Proto RefCnt Flags       Type       State         I-Node Path

unix  3      [ ]         DGRAM                    7948   /dev/log2

unix  2      [ ]         DGRAM                    28530  
/usr/local/platform/conf/clm/unix_socket

unix  11     [ ]         DGRAM                    7809   /dev/log

unix  2      [ ]         DGRAM                    4001   @udevd

unix  2      [ ]         DGRAM                    1173292 

unix  2      [ ]         DGRAM                    1171540 

show open files all

show open files all

Syntax Description

none

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all open files on the CTRS.

Examples

admin:show open files all

Executing.. please wait.

COMMAND     PID     USER   FD      TYPE     DEVICE        SIZE       NODE NAME

init          1     root  cwd       DIR      104,2        4096          2 /

init          1     root  rtd       DIR      104,2        4096          2 /

init          1     root  txt       REG      104,2       31216    3997776 /sbin/init

init          1     root  mem       REG      104,2       52400    2277509 
/lib/libsepol.so.1

init          1     root  mem       REG      104,2     1539036    2277466 
/lib/tls/libc-2.3.4.so

init          1     root  mem       REG      104,2      110984    2277391 /lib/ld-2.3.4.so

init          1     root  mem       REG      104,2       55000    2277498 
/lib/libselinux.so.1

init          1     root   10u     FIFO       0,13                   1203 /dev/initctl

migration     2     root  cwd       DIR      104,2        4096          2 /

migration     2     root  rtd       DIR      104,2        4096          2 /

migration     2     root  txt   unknown                                   /proc/2/exe

ksoftirqd     3     root  cwd       DIR      104,2        4096          2 /

ksoftirqd     3     root  rtd       DIR      104,2        4096          2 /

ksoftirqd     3     root  txt   unknown                                   /proc/3/exe

migration     4     root  cwd       DIR      104,2        4096          2 /

migration     4     root  rtd       DIR      104,2        4096          2 /

migration     4     root  txt   unknown                                   /proc/4/exe

ksoftirqd     5     root  cwd       DIR      104,2        4096          2 /

ksoftirqd     5     root  rtd       DIR      104,2        4096          2 /

ksoftirqd     5     root  txt   unknown                                   /proc/5/exe

migration     6     root  cwd       DIR      104,2        4096          2 /

migration     6     root  rtd       DIR      104,2        4096          2 /

migration     6     root  txt   unknown                                   /proc/6/exe

ksoftirqd     7     root  cwd       DIR      104,2        4096          2 /

ksoftirqd     7     root  rtd       DIR      104,2        4096          2 /

ksoftirqd     7     root  txt   unknown                                   /proc/7/exe

migration     8     root  cwd       DIR      104,2        4096          2 /

migration     8     root  rtd       DIR      104,2        4096          2 /

migration     8     root  txt   unknown                                   /proc/8/exe

show open files process

show open files process {processID1,processID2...}

Syntax Description

processID1...

Process ID numbers. To show information about more than one process, separate process ID numbers with a comma.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all open files on the device belonging to the indicated processes.

Examples

admin:show open files process 3886,4086

COMMAND   PID USER   FD   TYPE     DEVICE    SIZE    NODE NAME

arpmond  3886 root  cwd    DIR      104,2    4096       2 /

arpmond  3886 root  rtd    DIR      104,2    4096       2 /

arpmond  3886 root  txt    REG      104,2   19483  328533 
/usr/local/os-services/sbin/arpmond

arpmond  3886 root  mem    REG      104,2  110984 2277391 /lib/ld-2.3.4.so

arpmond  3886 root  mem    REG      104,2 1539036 2277466 /lib/tls/libc-2.3.4.so

arpmond  3886 root    0r   CHR        1,3            1930 /dev/null

arpmond  3886 root    1w   CHR        1,3            1930 /dev/null

arpmond  3886 root    2w   CHR        1,3            1930 /dev/null

arpmond  3886 root    3u  sock        0,4            7384 can't identify protocol

arpmond  3886 root    4u  sock        0,4            7742 can't identify protocol

arpmond  3886 root    5wW  REG      104,2       4 4030838 /var/lock/subsys/.arpmond

arpmond  3886 root    6u  unix 0xf69e7dc0            7741 socket

arpmond  3886 root    7u  sock        0,4            7632 can't identify protocol

ipprefsd 4086 root  cwd    DIR      104,2    4096       2 /

ipprefsd 4086 root  rtd    DIR      104,2    4096       2 /

ipprefsd 4086 root  txt    REG      104,2  132789  328534 
/usr/local/os-services/sbin/ipprefsd

ipprefsd 4086 root  mem    REG      104,2  105824 2277470 /lib/tls/libpthread-2.3.4.so

ipprefsd 4086 root  mem    REG      104,2  717778  511070 
/usr/local/platform/lib/libstlport.so.5.1

ipprefsd 4086 root  mem    REG      104,2  211948 2277468 /lib/tls/libm-2.3.4.so

ipprefsd 4086 root  mem    REG      104,2   47404 2277426 /lib/libnss_files-2.3.4.so

ipprefsd 4086 root  mem    REG      104,2  110984 2277391 /lib/ld-2.3.4.so

ipprefsd 4086 root  mem    REG      104,2   38624 2277378 
/lib/libgcc_s-3.4.6-20060404.so.1

ipprefsd 4086 root  mem    REG      104,2 1539036 2277466 /lib/tls/libc-2.3.4.so

ipprefsd 4086 root    0r   CHR        1,3            1930 /dev/null

ipprefsd 4086 root    1w   CHR        1,3            1930 /dev/null

ipprefsd 4086 root    2w   CHR        1,3            1930 /dev/null

ipprefsd 4086 root    3u  unix 0xf69e7bc0            7791 /tmp/ipprefs.socket

show open files regexp

show open files regexp "string"

Syntax Description

"string"

Regular expression identifying string. String value must be included inside quotation marks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all open files on the device that match the regular expression as defined by the string value.

Examples

admin:show open files regexp "Cisco"

Executing.. please wait.

syslogd    4174     root   10u     FIFO      104,2                4030835 
/var/CiscoSyslogFifo

snmpd      8642     root    6r     FIFO      104,2                4030835 
/var/CiscoSyslogFifo

java      29187    admin  mem       REG      104,2       46642     511301 
/usr/local/platform/jar/CiscoIPSec.jar

show open ports all

show open ports all

Syntax Description

none

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all open ports on the device.

Examples

admin:show open ports all

Executing.. please wait.

COMMAND     PID     USER   FD   TYPE  DEVICE SIZE NODE NAME

sshd       4355     root    3u  IPv6    8294       TCP *:ssh (LISTEN)

dhparent2  4577     root    4u  IPv4    8955       TCP *:12104 (LISTEN)

java       4624     root    4u  IPv4    8955       TCP *:12104 (LISTEN)

post_proc  4656     root    4u  IPv4    8955       TCP *:12104 (LISTEN)

post_proc  4656     root    6u  IPv4    9013       TCP *:61456 (LISTEN)

ccs        5380     root    4u  IPv4    8955       TCP *:12104 (LISTEN)

ccs        5380     root    7u  IPv4    9817       TCP *:12102 (LISTEN)

ccs        5380     root    8u  IPv4    9899       TCP *:61455 (LISTEN)

ccs        5380     root    9u  IPv4    9901       TCP *:61457 (LISTEN)

keyExchan  5528     root    4u  IPv4    8955       TCP *:12104 (LISTEN)

cmahostd   7766     root    4u  IPv4 1177318       UDP *:49152 

cmapeerd   7936     root    3u  IPv4   15503       UDP 127.0.0.1:25376 

cmanicd    8111     root    3u  IPv4   16564       UDP 127.0.0.1:25393 

snmpd      8642     root    7u  IPv4   16654       TCP *:61461 (LISTEN)

snmpd      8642     root    9u  IPv4   16672       UDP 127.0.0.1:25375 

snmpd      8642     root   10u  IPv4   16675       UDP *:snmp 

clm        9600     root    6u  IPv4   28528       UDP *:8500 

clm        9600     root    7u  IPv4   28529       TCP *:8500 (LISTEN)

racoon     9603     root    7u  IPv6   27678       UDP [fe80::223:7dff:fe62:b15a]:isakmp 

racoon     9603     root    8u  IPv6   27680       UDP [::1]:isakmp 

racoon     9603     root    9u  IPv4   27681       UDP 172.28.70.109:isakmp 

racoon     9603     root   10u  IPv4   27682       UDP 127.0.0.1:isakmp 

servM      9608  servmgr    6u  IPv4   27894       TCP 127.0.0.1:8888 (LISTEN)

servM      9608  servmgr    7u  IPv4   27897       TCP 127.0.0.1:8889 (LISTEN)

ntpd      10800      ntp    4u  IPv4   28111       UDP *:ntp 

ntpd      10800      ntp    5u  IPv6   28112       UDP *:ntp 

ntpd      10800      ntp    6u  IPv4   28113       UDP 127.0.0.1:ntp 

ntpd      10800      ntp    7u  IPv4   28114       UDP 172.28.70.109:ntp 

oninit    11160 informix    4u  IPv4   28738       TCP 172.28.70.109:tsbu_ctrs_dev6_ctis 
(LISTEN)

oninit    11160 informix    6u  IPv4 1177195       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41751 (ESTABLISHED)

show open ports regexp

show open ports regexp "string"

Syntax Description

"string"

Regular expression identifying string. String value must be included inside quotation marks.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all open ports on the device that match the regular expression as defined by the string value.

Examples

admin:show open ports regexp "informix"

Executing.. please wait.

oninit    11160 informix    4u  IPv4   28738       TCP 172.28.70.109:tsbu_ctrs_dev6_ctis 
(LISTEN)

oninit    11160 informix    6u  IPv4 1177195       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41751 (ESTABLISHED)

oninit    11160 informix    7u  IPv4 1177197       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41752 (ESTABLISHED)

oninit    11160 informix    8u  IPv4 1177199       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41753 (ESTABLISHED)

oninit    11160 informix    9u  IPv4 1177201       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41754 (ESTABLISHED)

oninit    11160 informix   10u  IPv4 1177203       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41755 (ESTABLISHED)

oninit    11160 informix   11u  IPv4 1177205       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41756 (ESTABLISHED)

oninit    11160 informix   12u  IPv4 1177207       TCP 
172.28.70.109:tsbu_ctrs_dev6_ctis->172.28.70.109:41757 (ESTABLISHED)

show packages

show packages {active name | active *} | {inactive name | inactive *}

Syntax Description

active name	Retrieves the version number for a specific package on the active partition.
active *	Retrieves the version numbers for all packages on the active partition.
inactive name	Retrieves the version number for a specific package on the inactive partition.
inactive *	Retrieves the version number for all packages on the inactive partition.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the version number of one or more packages on the active side or inactive partition.

Examples

admin:show packages active jdk

Active Side Package(s): for jdk package(s)

jdk-1.5.0_17-fcs

admin: show packages inactive jdk

Inactive Side Package(s): for jdk package(s)

jdk-1.5.0_14-fcs

show process list

show process list [file name] [detail] [vm]

Syntax Description

file name	Saves output in a separate file.
detail	Displays detailed process information, such as process page fault, virtual memory and start time.
vm	Displays process virtual memory.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the list of all processes and critical information about each of them. This command also displays the parent-child relationship between these processes.

Use the detail option to see a more detailed view of these processes.

Use the file name option to redirect the output of this command.

Examples

admin:show process list 

...

 5758 /usr/sbin/racoon -F -f /etc/racoon/racoon.conf

 5759 /usr/local/platform/bin/servM

 7035  \_ /usr/local/cm/bin/dbmon

 7985  \_ /usr/local/cm/bin/cdpd -f

 8045  \_ /usr/local/platform/bin/enStart

 8255  \_ /usr/local/platform/bin/certM

 8514  \_ /usr/local/cm/bin/cdragent /usr/local/cm/conf/cdragent/cdragentCfg.xml

 8538  \_ /usr/local/cm/bin/RisDC

 8551  \_ /usr/local/cm/bin/amc /usr/local/cm/conf/amc/amcCfg.xml

 8695  \_ /usr/local/cm/bin/ctftp

 6627 /usr/local/cm/bin/cmoninit

 6628  \_ /usr/local/cm/bin/cmoninit

 6629      \_ /usr/local/cm/bin/cmoninit

 6630      \_ /usr/local/cm/bin/cmoninit

 6631      \_ /usr/local/cm/bin/cmoninit

 6632      \_ /usr/local/cm/bin/cmoninit

 ...

show process load

show process load [cpu | memory | time] [cont] [clear] [noidle] [page] [thread]
[num number | num all]

Syntax Description

cont	Repeats the command continuously.
clear	Screen clears before displaying output.
cpu	Sorts output by CPU usage. If no options are specified, this is the default. Note This option cannot be combined with other options.
memory	Sorts output by memory usage. Note This options cannot be combined with other options.
noidle	Command ignores the idle/zombie processes
page	Pauses output.
thread	Displays threads.
time	Sorts output by time usage. Note This option cannot be combined with other options.
num number	Defines the number of processes to display; minimum value is 1, default is 10.
num all	Displays all processes.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the current system load including the number of processes using the most CPU, memory or time.

---

Note The following options cannot be combined with other command options: cpu, memory or time. If more than one is specified, the last one will be used. If none is specified, cpu will be shown.

---

Examples

admin:show process load num 10

 22:11:35  up  7:50,  4 users,  load average: 0.00, 0.00, 0.00

75 processes: 74 sleeping, 1 running, 0 zombie, 0 stopped

CPU states:  cpu    user    nice  system    irq  softirq  iowait    idle

           total    1.9%    0.0%    0.9%   0.9%     0.0%   10.6%   85.4%

Mem:   511988k av,  494364k used,   17624k free,       0k shrd,   46104k buff

                    354932k actv,   67572k in_d,    6848k in_c

Swap: 2048248k av,   17984k used, 2030264k free                  269444k cached

  PID USER     PRI  NI  SIZE  RSS SHARE STAT %CPU %MEM   TIME CPU COMMAND

13993 admin     24   0  1152 1152   888 R     1.9  0.2   0:00   0 top

    1 root      15   0   512  480   448 S     0.0  0.0   0:04   0 init

    2 root      RT   0     0    0     0 SW    0.0  0.0   0:00   0 migration/0

    3 root      15   0     0    0     0 SW    0.0  0.0   0:00   0 keventd

    4 root      15   0     0    0     0 SW    0.0  0.0   0:03   0 kapmd

    5 root      34  19     0    0     0 SWN   0.0  0.0   0:00   0 ksoftirqd/0

    8 root      25   0     0    0     0 SW    0.0  0.0   0:00   0 bdflush

    6 root      15   0     0    0     0 SW    0.0  0.0   0:01   0 kswapd

    7 root      15   0     0    0     0 SW    0.0  0.0   0:00   0 kscand

    9 root      15   0     0    0

show process name

show process name process-name [file name] [cont] [detail | vm ]

Syntax Description

process-name	Identifies a specific process.
file name	Saves output in a separate file.
cont	Repeats the command continuously.
detail	Displays detailed process information, such as virtual memory, and start time.
vm	Displays the process virtual memory.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the details of processes that share the same name. This command displays the parent-child relationship.

Examples

admin:show process name servM detail

  PID  PPID TID %CPU %MEM S USER    MINFL  MAJFL  RSS   VSZ                  STARTED 
COMMAND

 7280     1 -  0.1  0.3 S servmgr   21909   1962 7432 86140 Mon Jan 14 10:53:25 2008 
/usr/local/platform/bin/servM

show process open-fd

show process open-fd process-ID [file name] [cont]

Syntax Description

process-ID	Identifies a specific process.
file name	Saves output in a separate file.
cont	Repeats the command continuously.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the open file descriptors for a comma-separated list of process IDs.

Examples

admin: show process open-fd 10554

COMMAND     PID USER   FD   TYPE DEVICE     SIZE    NODE NAME

ntp_start 10554 root  cwd    DIR    8,1     4096       2 /

ntp_start 10554 root  rtd    DIR    8,1     4096       2 /

ntp_start 10554 root  txt    REG    8,1   585908  506215 /bin/bash

ntp_start 10554 root  mem    REG    8,1    13601 1077403 /lib/libdl-2.3.2.so

ntp_start 10554 root  mem    REG    8,1  1516255  587978 /lib/tls/libc-2.3.2.so

ntp_start 10554 root  mem    REG    8,1     5848   49258 /lib/csa/sse2/sse2_boost.so.1

ntp_start 10554 root  mem    REG    8,1   102480 1077387 /lib/ld-2.3.2.so

ntp_start 10554 root  mem    REG    8,1   124884   49255 /lib/csa/libcsa.so.6

ntp_start 10554 root  mem    REG    8,1    50783 1077423 /lib/libnss_files-2.3.2.so

ntp_start 10554 root  mem    REG    8,1    86486  587977 /lib/tls/libpthread-0.60.so

ntp_start 10554 root  mem    REG    8,1    11784 1077461 /lib/libtermcap.so.2.0.8

ntp_start 10554 root  mem    REG    8,1    21436  424691 
/usr/lib/gconv/gconv-modules.cache

ntp_start 10554 root  mem    REG    8,1 32148976  326576 /usr/lib/locale/locale-archive

...

show process pid

show process pid process-ID [file name] [cont] [detail | vm ]

Syntax Description

process-ID	Identifies a specific process.
file name	Saves output in a separate file.
cont	Repeats the command continuously.
detail	Displays detailed process information, such as virtual memory, and start time.
vm	Displays the process virtual memory.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the details of a process with a specified process ID.

Examples

admin:show process pid 3886 vm

PID TTY      STAT   TIME  MAJFL   TRS   DRS  RSS %MEM COMMAND

 3886 ?        S      1:29      0    12  1659  396  0.0 
/usr/local/os-services/sbin/arpmond

show process search

show process search regexp [file name ]

Syntax Description

regexp	Identifies a specific string (regular expression) on which to search.
file name	Saves output in a separate file.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to search for particular patterns in the output of the operating system-specific process listing.

Examples

admin:show process search cisco*

root     10731  7672  0 20:01 pts/0    00:00:00 /bin/bash 
/usr/local/platform/cli_scripts/listProcesses.sh -search cisco*

root     10736 10731  0 20:01 pts/0    00:00:00 grep -i cisco*

show process user

show process user name [file name ] [cont] [detail | vm ]

Syntax Description

name	User identification
file name	Saves output in a separate file.
cont	Repeats the command continuously.
detail	Displays detailed process information, such as virtual memory, and start time.
vm	Displays the process virtual memory.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display details of processes that share the specified user name. This command displays the parent-child relationship.

Examples

admin:show process user admin

  PID  PPID TID %CPU S COMMAND

13342 13341 -  0.0 S cliscript.sh

13423 13342 -  0.4 S java

13689 13423 -  0.0 S  \_ listProcesses.s

13694 13689 -  0.0 R      \_ ps

13424 13342 -  0.0 S java

13425 13342 -  0.0 S java

13426 13342 -  0.0 S java

13427 13342 -  0.0 S java

13428 13342 -  0.1 S java

13429 13342 -  0.0 S java

13430 13342 -  0.0 S java

...

show process using-most cpu

show process using-most cpu [file name] [cont] [number]

Syntax Description

file name	Saves output in a separate file.
cont	Repeats the command continuously.
number	Defines the number of processes to display; default is 5.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display a list of the most CPU-intensive processes.

Examples

admin:show process using-most cpu

1.4   1   0 S 00:00:33 ./jre/bin/java -Djava.compiler=NONE -cp /usr/StorMan/RaidMan.jar 
com.ibm.sysmgt.raidmgr.agent.ManagementAgent

 1.4   1   0 S 00:00:30 /usr/local/cm/bin/amc /usr/local/cm/conf/amcCfg.xml

 1.6   0   0 S 00:00:38 /usr/local/cm/bin/cmoninit

 3.3   0   0 S 00:01:13 /usr/local/cm/bin/RisDC

 6.0   1   0 S 00:02:16 /home/tomcat/tomcat /home/tomcat/tomcatJlauncherConfig.xml 
-Djava.library.path=/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/loca
l/thirdparty/java/j2sdk/jre/lib/i386/server:/usr/lib/pgsql:/usr/lib:/usr/local/cm/lib::/us
r/local/platform/lib -Xmx512m -Xms256m -DLD_ASSUME_KERNEL

show process using-most memory

show process using-most memory [file name ] [cont] [number]

Syntax Description

file name	Saves output in a separate file.
cont	Repeats the command continuously.
number	Defines the number of processes to display; default is 5.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display a list of the most memory-intensive processes.

Examples

admin:show process using-most memory

75564 /usr/local/cm/bin/cmoninit

75600 /usr/local/cm/bin/cmoninit

76428 /usr/local/cm/bin/cmoninit

117412 /usr/local/cm/bin/cmoninit

148832 /home/tomcat/tomcat /home/tomcat/tomcatJlauncherConfig.xml 
-Djava.library.path=/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/loca
l/thirdparty/java/j2sdk/jre/lib/i386/server:/usr/lib/pgsql:/usr/lib:/usr/local/cm/lib::/us
r/local/platform/lib -Xmx512m -Xms256m -DLD_ASSUME_KERNEL=2.2.5 -Djava.end

show recordedquality

show recordedquality recid

Syntax Description

recid

Recording identification number.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the quality level for a recorded file that is identified by a recording identification number (recid). Recording identification numbers can be found in the Recordings Management section of the administrative user interface.

Examples

admin:show recordedquality 2009113021152077726258

Highest Detail, Best Motion: 1080p

show refreshrate

show refreshrate

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the default spacing between IDRs in the video streams.

Examples

admin:show refreshrate

IDRs are spaced 15 seconds apart

show snmp trapdests

show snmp trapdests

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the configured Simple Network Management Protocol (SNMP) trap destinations.

Examples

admin:show snmp trapdests

1) Host = 64.101.180.49:162 (Version 3)

     Version 3 Options:

            User = TimTrap               PW   = authpriv

           Level = authnopriv            hash = md5

        EngineID = 0x80001f8803001a6406bc16

  2) Host = 64.101.180.49 (Version 3)

     Version 3 Options:

            User = TimTrap2              PW   = authpriv

           Level = authnopriv            hash = md5

        EngineID = 0x80001f8803001a6406bc16

show snmp users

show snmp users

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the configured Simple Network Management Protocol (SNMP) users and communities.

Examples

admin:show snmp users

1)  Username: admin                     Version: v3

       Level: AuthNoPriv                   Mode: RW

2)  Username: tim                       Version: v3

       Level: AuthNoPriv                   Mode: RW

3) Community: TimRO                     Version: v2c

       Level: n/a                          Mode: R

4) Community: TimRW                     Version: v2c

       Level: n/a                          Mode: RW

show stats io

show stats [file name] [kilo | detail] [page]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
kilo	Shows details statistics in kilobytes.
detail	Shows detailed statistics of every available device on the system. This option overrides kilo option.
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display system I/O statistics of the device.

Examples

admin:show stats io kilo file statsiodump

show status

show status

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display basic platform status information.

Examples

admin:show status

Host Name    : tsbu-ctrs-dev6

Date         : Tue Dec 1, 2009 20:47:30

Time Zone    : Coordinated Universal Time (Etc/UTC)

Locale       : en_US.UTF-8

Product Ver  : 2.0.0.0-44

Platform Ver : 2.0.0.1-1

License MAC  : 00237D62B15A

Uptime:

 20:47:31 up 8 days,  1:04,  3 users,  load average: 0.33, 0.35, 0.28

CPU Idle:                          %  System:  00.00%    User:  00.00%

  IOWAIT:  00.00%     IRQ:  00.00%    Soft:  00.00%   Intr/sec: 1034.34

Memory Total:        4147676K

        Free:        2954080K

        Used:        1193596K

      Cached:         523412K

      Shared:              0K

     Buffers:         112808K

                        Total            Free            Used

Disk/active         34701384K       31991040K        2357800K (7%)

Disk/inactive       34701352K       32444668K        1904140K (6%)

Disk/logging       705460380K      650848468K       18776524K (3%)

     Buffers:          68972K

                        Total            Free            Used

Disk/active          4032124K        2117232K        1710064K (45%)

Disk/inactive        4032092K        1857492K        1969776K (52%)

Disk/logging        70438620K       63214064K        3646484K (6%)

show syslog facility

show syslog facility

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog default facility used for logging messages.

Examples

admin:show syslog facility

Using the local1 facility

show syslog heartbeat facility

show syslog heartbeat facility

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat facility used for heartbeat messages.

Examples

admin:show syslog heartbeat facility

Using the local1 facility

show syslog heartbeat interval

show syslog heartbeat interval

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat interval in minutes.

---

Note Zero (0) indicates that the syslog heartbeat interval is disabled.

---

Examples

admin:show syslog heartbeat interval

Using the 0 minute interval

show syslog heartbeat msg

show syslog heartbeat msg

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog heartbeat message text.

Examples

admin:show syslog heartbeat msg

Using the "Syslog heartbeat message" message

show syslog heartbeat severity

show syslog heartbeat severity

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the severity used for syslog heartbeat messages.

Examples

admin:show syslog heartbeat severity

Using the 7 severity

show syslog timezone

show syslog timezone

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog timezone setting as either local time or GMT/UTC.

Examples

admin:show syslog timezone

Using gmt timezone

show syslog version

show syslog version

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the syslog output version as either CiscoLog v1.1 or IETF/RFC Syslog Protocol Version 1.

Examples

admin:show syslog version

Version is 0, the Ciscolog v1.1 format

show tech all

show tech all [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display output from all of the show tech commands simultaneously.

---

Note This command may produce a large output of data.

---

Examples

admin:show tech all file techdump

show tech network all

show tech network all [page] [file name] [search text]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all of the network-related information associated with the node.

Examples

admin:show tech network all 

-------------------- show platform network -------------------- 

 Ethernet Interfaces: 

1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 00:23:7d:62:b1:5a brd ff:ff:ff:ff:ff:ff

    inet 172.28.70.109/22 brd 172.28.71.255 scope global eth0

    inet6 fe80::223:7dff:fe62:b15a/64 scope link 

       valid_lft forever preferred_lft forever

3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 00:23:7d:62:b1:58 brd ff:ff:ff:ff:ff:ff

4: sit0: <NOARP> mtu 1480 qdisc noop 

    link/sit 0.0.0.0 brd 0.0.0.0

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Supports auto-negotiation: Yes

        Advertised link modes:  10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Advertised auto-negotiation: Yes

        Speed: 1000Mb/s

  ...

show tech network hosts

show tech network hosts [page] [file name] [search text]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display host-related aspects of the device's network.

Examples

admin:show tech network hosts 

-------------------- show platform network -------------------- 

 /etc/hosts File: 

#This file was generated by the /etc/hosts cluster manager.

#It is automatically updated as nodes are added, changed, removed from the cluster.

127.0.0.1 localhost

::1 localhost

172.28.70.109 tsbu-ctrs-dev6.cisco.com tsbu-ctrs-dev6 

show tech network interfaces

show tech network interfaces [page] [file name] [search text]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display interface-related aspects of the device's network.

Examples

admin:show tech network interfaces

-------------------- show platform network -------------------- 

 Ethernet Interfaces: 

1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 00:23:7d:62:b1:5a brd ff:ff:ff:ff:ff:ff

    inet 172.28.70.109/22 brd 172.28.71.255 scope global eth0

    inet6 fe80::223:7dff:fe62:b15a/64 scope link 

       valid_lft forever preferred_lft forever

3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 00:23:7d:62:b1:58 brd ff:ff:ff:ff:ff:ff

4: sit0: <NOARP> mtu 1480 qdisc noop 

    link/sit 0.0.0.0 brd 0.0.0.0

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Supports auto-negotiation: Yes

        Advertised link modes:  10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Advertised auto-negotiation: Yes

        Speed: 1000Mb/s

...

show tech network resolv

show tech network resolv [page] [file name] [search text]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display specific information from the resolv.conf file for this device.

Examples

admin:show tech network resolv 

-------------------- show platform network -------------------- 

 /etc/resolv.conf file

search cisco.com

nameserver 171.70.168.183 

show tech network routes

show tech network routes [page] [file name] [search text]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display specific route-related information for this device.

Examples

admin:show tech network routes 

-------------------- show platform network -------------------- 

 Routes: 

172.28.68.0/22 dev eth0  proto kernel  scope link  src 172.28.70.109 

169.254.0.0/16 dev eth0  scope link 

default via 172.28.68.1 dev eth0 

show tech network sockets

show tech network sockets [page] [file name] [search text] [numeric]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.
search text	Searches output for a particular text string as indicated by text. Search is case insensitive.
numeric	Displays ports in numeric format

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the list of open sockets. With the numeric option, you can show the numerical addresses of the ports instead of determining symbolic hosts.

Examples

admin:show tech network sockets numeric

 -------------------- show platform network -------------------- 

 Network Connections:

Active Internet connections (w/o servers)

Proto Recv-Q Send-Q Local Address               Foreign Address             State      

tcp        0      0 localhost:9000              localhost:32789             ESTABLISHED 

tcp        0      0 localhost:32789             localhost:9000              ESTABLISHED 

tcp        0     48 tsbu-kht9.cisco.com:22      sjc-tifox-8712.cisco.c:3445 ESTABLISHED 

udp        0      0 localhost:32768             localhost:514               ESTABLISHED 

Active UNIX domain sockets (w/o servers)

Proto RefCnt Flags       Type       State         I-Node Path

unix  2      [ ]         DGRAM                    16220  
/usr/local/platform/conf/clm/unix_socket

unix  2      [ ]         DGRAM                    8434   @/var/run/hal/hotplug_socket

unix  2      [ ]         DGRAM                    3352   @udevd

unix  13     [ ]         DGRAM                    6581   /dev/log

unix  3      [ ]         DGRAM                    6600   /dev/log2

unix  2      [ ]         DGRAM                    2049109 

unix  3      [ ]         STREAM     CONNECTED     2043836 

unix  3      [ ]         STREAM     CONNECTED     2043835 

unix  2      [ ]         DGRAM                    252061 

unix  2      [ ]         DGRAM                    251977 

unix  2      [ ]         DGRAM                    251967 

unix  2      [ ]         DGRAM                    16316  

unix  2      [ ]         DGRAM                    16222  

...

show tech runtime all

show tech runtime all [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all of the show tech runtime information simultaneously, including environment variables, disk, memory and CPU.

Examples

admin:show tech runtime all

-------------------- show platform runtime -------------------- 

Environment variables:

TOMCAT_HOME=/usr/local/thirdparty/jakarta-tomcat

SERVER_LOCALE=en_us.utf8

HOSTNAME=tsbu-ctrs-dev6

SR_AGT_CONF_DIR=/usr/local/Snmpri/conf

SHELL=/usr/local/platform/bin/cliscript.sh

TERM=vt100

CATALINA_HOME=/usr/local/thirdparty/jakarta-tomcat

INFORMIXTMP=/usr/local/ctis/db/informix/tmp

...

The disk usage:

Filesystem            Size  Used Avail Use% Mounted on

/dev/cciss/c0d0p2      34G  2.3G   31G   7% /

/dev/cciss/c0d0p1      34G  1.9G   31G   6% /partB

/dev/cciss/c0d1p1     673G   18G  621G   3% /common

none                  2.0G     0  2.0G   0% /dev/shm

...

Total memory (RAM+swap) usage (in KB):

             total       used       free     shared    buffers     cached

Mem:       4147676    1198220    2949456          0     112828     524952

-/+ buffers/cache:     560440    3587236

Swap:      2048248          0    2048248

Total:     6195924    1198220    4997704

The processor usage :

top - 21:53:33 up 8 days,  2:10,  3 users,  load average: 0.30, 0.32, 0.27

Tasks: 138 total,   1 running, 137 sleeping,   0 stopped,   0 zombie

...

show tech runtime cpu

show tech runtime cpu [page] [file name ]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the CPU usage at the time the command is executed.

Examples

admin:show tech runtime cpu

-------------------- show platform runtime -------------------- 

The processor usage :

top - 21:59:15 up 8 days,  2:16,  3 users,  load average: 0.31, 0.31, 0.27

Tasks: 137 total,   1 running, 136 sleeping,   0 stopped,   0 zombie

Cpu(s):  0.1% us,  0.0% sy,  0.0% ni, 99.9% id,  0.0% wa,  0.0% hi,  0.0% si

Mem:   4147676k total,  1197636k used,  2950040k free,   112828k buffers

Swap:  2048248k total,        0k used,  2048248k free,   524952k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            

    1 root      16   0  2552  652  560 S  0.0  0.0   0:01.48 init               

    2 root      RT   0     0    0    0 S  0.0  0.0   0:00.09 migration/0        

    3 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/0        

    4 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/1        

    5 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/1        

    6 root      RT   0     0    0    0 S  0.0  0.0   0:00.02 migration/2        

    7 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/2        

    8 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/3        

    9 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/3        

   10 root      RT   0     0    0    0 S  0.0  0.0   0:00.02 migration/4        

   11 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/4        

   12 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/5        

   13 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/5        

   14 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/6        

   15 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/6        

   16 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/7        

   17 root      34  19     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/7 

show tech runtime disk

show tech runtime disk [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the disk usage of the system.

Examples

admin:show tech runtime disk

-------------------- show platform runtime -------------------- 

The disk usage:

Filesystem            Size  Used Avail Use% Mounted on

/dev/cciss/c0d0p2      34G  2.3G   31G   7% /

/dev/cciss/c0d0p1      34G  1.9G   31G   6% /partB

/dev/cciss/c0d1p1     673G   18G  621G   3% /common

none                  2.0G     0  2.0G   0% /dev/shm

/dev/cciss/c0d0p3     251M   11M  228M   5% /grub

/dev/cciss/c0d0p6      67G   85M   63G   1% /spare

/dev/cciss/c0d1p1     673G   18G  621G   3% /common/media

show tech runtime env

show tech runtime env [page] [file name ]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display runtime environment variables.

Examples

admin:show tech runtime env

Environment variables:

TOMCAT_HOME=/usr/local/thirdparty/jakarta-tomcat

SERVER_LOCALE=en_us.utf8

HOSTNAME=tsbu-ctrs-dev6

SR_AGT_CONF_DIR=/usr/local/Snmpri/conf

SHELL=/usr/local/platform/bin/cliscript.sh

TERM=vt100

CATALINA_HOME=/usr/local/thirdparty/jakarta-tomcat

INFORMIXTMP=/usr/local/ctis/db/informix/tmp

HISTSIZE=1000

SSH_CLIENT=::ffff:171.70.13.148 4385 22

INFORMIXDIR=/usr/local/ctis/db/informix

JBOSS_HOME=/usr/local/thirdparty/jboss

SSH_TTY=/dev/pts/0

CLIENT_LOCALE=en_us.utf8

TOMCAT_CLASSPATH=/usr/local/thirdparty/java/bcprov-jdk15-138.jar:/usr/local/platform/jar/x
alan.jar:/usr/local/platform/jar/certMgmt.jar:/usr/local/platform/jar/certMonitor.jar:/usr
/local/platform/jar/Iproduct.jar:/usr/local/platform/jar/Ihardware.jar:/usr/local/platform
/jar/CiscoIPSec.jar:/usr/local/platform/jar/ciscoCmd.jar:/usr/local/platform/jar/ciscoComm
on.jar:/usr/local/platform/jar/platform-api.jar:/common/download:/usr/local/platform/appli
cation_locale/platform-api:/usr/local/platform/application_locale/cmplatform:/usr/local/cm
/jar/commons-logging.jar

USER=admin

LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05
;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32
:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=
01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=
01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:

LD_LIBRARY_PATH=/usr/local/thirdparty/java/jdk1.5.0_17/jre/lib/i386/server:/usr/local/thir
dparty/java/jdk1.5.0_17/jre/lib/i386:/usr/local/thirdparty/java/jdk1.5.0_17/jre/../lib/i38
6:/usr/local/lib:/usr/local/thirdparty/java/j2sdk/jre/lib/i386:/usr/local/thirdparty/java/
...

show tech runtime memory

show tech runtime memory [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display runtime memory information.

Examples

admin:show tech runtime memory

-------------------- show platform runtime -------------------- 

Total memory (RAM+swap) usage (in KB):

             total       used       free     shared    buffers     cached

Mem:       4147676    1199348    2948328          0     112844     525716

-/+ buffers/cache:     560788    3586888

Swap:      2048248          0    2048248

Total:     6195924    1199348    4996576

show tech system all

show tech system all [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display all of the information associated with show tech system commands simultaneously, including bus, hardware, host, kernel, software and tools.

Examples

admin:show tech system all

-------------------- show platform system -------------------- 

Host related info:

Machine Name: tsbu-ctrs-dev6.cisco.com

Tue Dec  1 22:10:31 UTC 2009 - up for 8 days  2:27

Locale LANG=en_US.UTF-8

Software Release Version: 2.0.0.0-44

Platform Release Version: 2.0.0.1-1

Hardware Model: 7845H2

Processors    : 2

Type          :  Family: Xeon

...

software: system versions

java version "1.5.0_17"

Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)

...

Tomcat "6.0.20-0"

Linux Kernel modules loaded: 

Module                  Size  Used by

ipt_REDIRECT            6209  2 

deflate                 7617  0 

...

show tech system bus

show tech system bus [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display bus-related system information.

Examples

admin: show tech system bus

-------------------- show platform system -------------------- 

Hardware: pci bus devices summary

00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)

00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 (rev b1)

00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)

00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)

00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 
(rev 09)

00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface 
Controller (rev 09)

00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09)

01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)

01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller 
(rev 03)

01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller

01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART

02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)

03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet 
(rev 12)

04:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)

05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet 
(rev 12)

06:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 04)

09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)

Hardware: USB bus devices summary

Bus 006 Device 001: ID 0000:0000  

Bus 005 Device 003: ID 03f0:1327 Hewlett-Packard 

Bus 005 Device 002: ID 03f0:1027 Hewlett-Packard 

Hardware: bus devices detail 

...

show tech system hardware

show tech system hardware [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display hardware-related system information.

Examples

admin:show tech system hardware 

-------------------- show platform system -------------------- 

Hardware Model: 7845H2

Processors    : 2

Type          :  Family: Xeon

Speed         : 2333 MHz

Memory        : 4096 MB

show tech system host

show tech system host [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display host-related system information.

Examples

admin:show tech system host

-------------------- show platform system -------------------- 

Host related info:

Machine Name: tsbu-ctrs-dev6.cisco.com

Tue Dec  1 22:18:35 UTC 2009 - up for 8 days  2:35

Locale LANG=en_US.UTF-8

show tech system kernel modules

show tech system kernel modules [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the kernel modules installed.

Examples

admin:show tech system kernel modules

-------------------- show platform system -------------------- 

Linux Kernel modules loaded: 

Module                  Size  Used by

ipt_REDIRECT            6209  2 

deflate                 7617  0 

zlib_deflate           24793  1 deflate

twofish                41025  0 

serpent                17729  0 

aes                    32641  0 

blowfish               14273  0 

des                    15809  0 

sha256                 13377  0 

crypto_null             6337  0 

af_key                 34513  2 

mptctl                 37573  4 

mptbase                68257  1 mptctl

sg                     38369  0 

hpilo                  13836  6 

ipmi_si                39904  2 

ipmi_devintf           13448  4 

ipmi_msghandler        33644  2 ipmi_si,ipmi_devintf

i2c_dev                14529  0 

i2c_core               26305  1 i2c_dev

iptable_nat            27613  2 ipt_REDIRECT

ipt_LOG                10177  1 

ipt_limit               6465  2 

ipt_state               5953  2 

ip_conntrack           46085  2 iptable_nat,ipt_state

iptable_filter          6977  1 

ip_tables              23105  6 
ipt_REDIRECT,iptable_nat,ipt_LOG,ipt_limit,ipt_state,iptable_filter

...

show tech system software

show tech system software [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display system-related software information.

Examples

admin:show tech system software 

-------------------- show platform system -------------------- 

Software Release Version: 2.0.0.0-44

Platform Release Version: 2.0.0.1-1

show tech system tools

show tech system tools [page] [file name]

Syntax Description

file name	Saves output information to a file. The file is saved in the following format: platform/cli/name.txt. The name option cannot contain a period (.).
page	Pauses output.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display system-related tools information.

Examples

admin:show tech system tools

-------------------- show platform system -------------------- 

software: system versions

java version "1.5.0_17"

Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)

Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)

Tomcat "6.0.20-0"

show timezone

show timezone {config | list}

Syntax Description

config	Displays the current timezone setting.
list	Lists all available timezones.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the current timezone settings or to display a list of all available timezones in long format.

---

Note The first value is the timezone index, which may be used to set a new timezone using the set timezone command. You can also use the time zone name.

---

Examples

admin:show timezone config

Current timezone: Coordinated Universal Time

admin:show timezone list

  0 - (GMT-12:00) Eniwetok, Kwajalein

  1 - (GMT-11:00) Midway Island, Samoa

  2 - (GMT-10:00) Hawaii

Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney

Current timezone: (GMT+10:00) Canberra, Melbourne, Sydney

The numbers in first column 0, 1, 2 represent index that can be used in set timezone 
command

  0 - (GMT-12:00) Eniwetok, Kwajalein

  1 - (GMT-11:00) Midway Island, Samoa

  2 - (GMT-10:00) Hawaii

  3 - (GMT-09:00) Alaska

  4 - (GMT-08:00) Pacific Time (US & Canada)

  5 - (GMT-07:00) Arizona

  6 - (GMT-07:00) Mountain Time (US & Canada)

  7 - (GMT-06:00) Central Time (US & Canada)

  8 - (GMT-06:00) Central America

  9 - (GMT-06:00) Saskatchewan

 10 - (GMT-06:00) Mexico City

 ...

show users

show users

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the users registered on this device.

Examples

admin:show users 

Users:

Guest  - Anonymous

show version

show version {active | inactive}

Syntax Description

active	Displays the version number of the software on the active partition.
inactive	Displays the version number of the software on the inactive partition.

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display information about the version number of the software on the inactive or active partition.

Examples

admin:show version active 

Active Master Version: 1.1.1.0-30

Active Version Installed Software Options: 

No Installed Software Options Found.

admin:show version inactive

Inactive Master Version: 1.6.0.0-213

Inactive Version Installed Software Options: 

No Installed Software Options Found.

show videoquality

show videoquality

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the default video quality.

Examples

admin:show videoquality 

Video Quality: Highest Detail, Best Motion: 1080p

show workingdir

show workingdir

Syntax Description

None

Command Modes

Admin

Command History

Release	Modifications
1.6	This command was first documented.

Usage Guidelines

Use this command to display the current working directories for activelog, inactivelog, and the TFTP system directories.

Examples

admin:show workingdir 

activelog : <not set, using default path>

inactivelog : <not set, using default path>

tftp : <not set, using default path>