Table Of Contents

Supported MIBs

MIB List

Using FTP to Access the MIB Files

Supported MIBs

---

This appendix lists the supported management information base (MIBs) for this release. It contains these sections:

•MIB List

•Using FTP to Access the MIB Files

MIB List

---

Note The Catalyst 2955 switch supports the ENTITY-MIB, CISCO-ENVMON-MIB and CISCO-ENTITY-ALARM-MIB.

---

•BRIDGE-MIB (RFC1493)

•CISCO-2900-MIB

•CISCO-BULK-FILE-MIB

•CISCO-CDP-MIB

•CISCO-CLUSTER-MIB

•CISCO-CONFIG-MAN-MIB

•CISCO-ENTITY-ALARM-MIB (Catalyst 2955 only)

•CISCO-ENTITY-VENDORTYPE-OID-MIB

•CISCO-ENVMON-MIB

•CISCO-FLASH-MIB

•CISCO-FTP-CLIENT-MIB

•CISCO-IETF-VDSL-LINE-MIB (Catalyst 2950 Long-Reach Ethernet [LRE] only)

•CISCO-IGMP-FILTER-MIB

•CISCO-IMAGE-MIB

•CISCO-LRE-CPR-MIB (Catalyst 2950 LRE only)

•CISCO-MAC-NOTIFICATION-MIB

•CISCO-MEMORY-POOL-MIB

•CISCO-PAGP-MIB

•CISCO-PING-MIB

•CISCO-PORT-SECURITY-MIB

•CISCO-PROCESS-MIB

•CISCO-PRODUCTS-MIB

•CISCO-RTTMON-MIB (subsystems supported: sub_rtt_rmon and sub_rtt_rmonlib)

•CISCO-SMI

•CISCO-STACKMAKER-MIB

•CISCO-STP-EXTENSIONS-MIB

•CISCO-SYSLOG-MIB

•CISCO-TC

•CISCO-TCP-MIB

•CISCO-VLAN-MEMBERSHIP-MIB

•CISCO-VTP-MIB

•ENTITY-MIB

•IANAifType-MIB

•IF-MIB (RFC 1573)

•OLD-CISCO-CHASSIS-MIB

•OLD-CISCO-CPU-MIB

•OLD-CISCO-INTERFACES-MIB

•OLD-CISCO-IP-MIB

•OLD-CISCO-MEMORY-MIB

•OLD-CISCO-SYSTEM-MIB

•OLD-CISCO-TCP-MIB

•OLD-CISCO-TS-MIB

•RFC1213-MIB

•RFC1398-MIB

•RMON-MIB (RFC 1757)

•RS-232-MIB

•SNMPv2-MIB

•SNMPv2-SMI

•SNMPv2-TC

•TCP-MIB

•UDP-MIB

---

Note The IF-MIB and the CISCO-IETF-VDSL-LINE-MIB are supported as read-only MIBs for the Fast Ethernet interfaces on the CPE devices.

---

Using FTP to Access the MIB Files

You can obtain each MIB file by using this procedure:

---

Step 1 Use FTP to access the server ftp.cisco.com.

Step 2 Log in with the username anonymous.

Step 3 Enter your e-mail username when prompted for the password.

Step 4 At the ftp> prompt, change directories to /pub/mibs/v1 and the /pub/mibs/v2.

Step 5 Use the get MIB_filename command to obtain a copy of the MIB file.

---

---

Note You can also access information about MIBs on the Cisco website:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

---