Table Of Contents

H Commands

hostname dynamic (FabricPath)

H Commands

---

This chapter describes the Cisco NX-OS FabricPath commands that begin with H.

hostname dynamic (FabricPath)

To configure a dynamic hostname exchange for Intermediate-System-to-Intermediate System (IS-IS), use the hostname dynamic command. To return to the default setting, use the no form of this command.

hostname dynamic

no hostname dynamic

Syntax Description

This command has no arguments or keywords.

Command Default

ON

Command Modes

FabricPath IS-IS configuration mode

Command History

Release	Modification
5.2(1)N1(1)	This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to configure a dynamic hostname exchange for IS-IS:

switch# configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

switch(config)# fabricpath domain default

switch(config-fabricpath-isis)# hostname dynamic

switch(config-fabricpath-isis)#

Related Commands

Command	Description
show hostname	Displays the system's hostname.