Table Of Contents

F Commands

feature cts

feature dot1x

F Commands

---

This chapter describes the Cisco NX-OS TrustSec commands that begin with F.

feature cts

To enable the Cisco TrustSec feature, use the feature cts command. To revert to the default, use the no form of this command.

feature cts

no feature cts

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release	Modification
5.1(3)N1(1)	This command was introduced.

Usage Guidelines

To use this command, you must enable the Cisco TrustSec feature using the feature dot1x command.

This command does not require a license.

Examples

This example shows how to enable the Cisco TrustSec feature:

switch# configure terminal

switch(config)# feature cts

switch(config)#

This example shows how to disable the Cisco TrustSec feature:

switch# configure terminal

switch(config)# no feature cts

switch(config)#

Related Commands

Command	Description
feature dot1x	Enables the 802.1X feature.
show cts	Displays the Cisco TrustSec status information.

feature dot1x

To enable the 802.1X feature, use the feature dot1x command. To revert to the default setting, use the no form of this command.

feature dot1x

no feature dot1x

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release	Modification
5.1(3)N1(1)	This command was introduced.

Usage Guidelines

You must use the feature dot1x command before you enable the Cisco TrustSec feature on the switch by using the feature cts command.

This command does not require a license.

Examples

This example shows how to enable 802.1X:

switch# configure terminal

switch(config)# feature dot1x

switch(config)#

This example shows how to disable 802.1X:

switch# configure terminal

switch(config)# no feature dot1x

switch(config)#

Related Commands

Command	Description
show dot1x	Displays 802.1X status information.
feature cts	Enables the Cisco TrustSec feature on the switch.