Table Of Contents

New and Changed Information

New and Changed Information for Cisco NX-OS Releases

New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)

New and Changed Information for Cisco NX-OS Release 5.1(3)N1(1)

New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)

New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)

New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)

New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)

New and Changed Information

---

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Fundamentals Command Reference. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/prod_command_reference_list.html

To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 5000 Series Switch Release Notes available at the following Cisco website:

http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html

New and Changed Information for Cisco NX-OS Releases

This section includes the following topics:

•New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)

•New and Changed Information for Cisco NX-OS Release 5.1(3)N1(1)

•New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)

•New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)

•New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)

•New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)

New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)

There are no new or changed features for this release.

New and Changed Information for Cisco NX-OS Release 5.1(3)N1(1)

summarizes the new and changed features for Cisco NX-OS Release 5.1(3)N1(1) and tells you where they are documented.

Table 1 New and Changed Information for Release 5.1(3)N1(1) 

Feature	Description	Where Documented
ASIC version of Layer 3 daughter card and GEM card	The following command was updated to display the ASIC version of a Layer 3 daughter card and GEM card: •show module	show module
Clock protocol	This feature was introduced to synchronize the clock protocol. The following command was added: •clock protocol	clock protocol

New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)

There are no new and changed features for Cisco NX-OS Release 5.0(3)N2(1).

New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)

summarizes the new and changed features for Cisco NX-OS Release 5.0(3)N1(1) and tells you where they are documented.

Table 2 New and Changed Information for Release 5.0(3)N1(1) 

Feature	Description	Where Documented
System resources	Added the show system resources command.	show system resources

New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)

There are no new and changed features for Cisco NX-OS Release 5.0(2)N2(1).

New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)

There are no new and changed features for Cisco NX-OS Release 5.0(2)N1(1).