This document provides release-specific information for each new and changed feature in Cisco Data Mobility Manager.
The Cisco MDS 9000 Family Data Mobility Manager Configuration Guide applies to Cisco NX-OS Release 4.2(1), but includes all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an MDS switch, refer to the Cisco MDS 9000 Family Data Mobility Manager Configuration Guide for the release train that applies to the release on your switch.
Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply.
To check for additional information about this release, refer to the Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Releases available at the following Cisco Systems website:
Table 1 summarizes the new and changed features as described in the Cisco MDS 9000 Family Data Mobility Manager Configuration Guide, and tells you where they are documented. The table includes a brief description of each new feature and the release in which the change occurred.
Table 1 New and Changed Features for Cisco Data Mobility Manager
Feature
Description
GUI Change
Changed in Release
Where Documented
DMM Pre-Configuration Wizard
Steps and screenshots added to configure the MDS modules using the DMM Pre-Configuration Wizard.
Allows you to configure the MDS modules for DMM using the DMM Pre-Configuration Wizard.