Table Of Contents

New and Changed Information

New and Changed Information

---

Table 1 summarizes the new and changed commands for Cisco MDS NX-OS Release 4.1(3) and tells you where they are documented in the Cisco MDS 9000 Family Command Reference .

The Cisco MDS 9000 Family Command Reference applies to Cisco NX-OS Release 4.1(3), but describes all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an MDS switch, refer to the Cisco MDS 9000 Family CLI Command Reference for the release train that applies to the release on your switch.

---

Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply.

---

Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference  

Feature	Description	Where Documented
New and Changed Commands for Cisco NX-OS Release 4.1(3)
Call Home	destination-profile command (Added the HTTPs URL and transport method to the syntax description)	D Commands
Port Guard	errdisable detect cause link-down command	E Commands
Port Owner	switchport owner command	S Commands
F port Trunking	feature command (Added features hhtp-server, fport-channel-trunk, npiv and npv to the syntax description)	F Commands
	switchport command (Added the F and NP port mode)	S Commands
	show flogi database interface command	Show Commands
F port Channeling	show port-channel compatibility-parameters command	Show Commands
	show port-channel consistency command
	show port-channel database command
	show port-channel internal command
	show port-channel summary command
	show port-channel usage command
	channel-group command (Deleted auto keyword from the syntax description)	C Commands
	port-channel persistent command (Added usage guideline)	P Commands
	clear asic-cnt command	C Commands
	ntp command (Added a note)	N Commands
	show fcns database command (Changed the command output for show fcns database detail)	Show Commands
Hardware	show system command (Changed the show system uptime output)	Show Commands
Radius Configuration	radius-server host command (Changed the command output)	R Commands
	show running radius command (Changed the command output)	Show Commands
Scheduler	scheduler command (Deleted a Note)	S Commands
EEM	event manager applet command	E Commands
	event command
	event manager policy command
	event manager environment command
	description command	D Commands
	show event manager policy command	Show Commands
	show event manager environment command
	action cli command	A Commands
	action counter command
	action event-default command
	action exception log command
	action forceshut command
	action overbudgetshut command
	action policy-defaultcommand
	action reload command
	action snmp-trap commnd
	action syslog command
	Added SME Commands
SME	scaling batch enable command	S Commands
New and Changed Commands for Cisco NX-OS Release 4.1(1b)
Call Home	switch-priority command (Added usage guidelines)	S Commands
	system delayed-traps timer command
	system delayed-traps enable mode command
system health	system health clear-errors command	S Commands
Port-monitor	show port-monitor status command	Show Commands
	show port-monitor active command
SNMP	show system internal snmp lc command
Scheduler	scheduler command (Added a Note)	S Commands
SSM	ssm upgrade delay command	S Commands
SANTap	show isapi tech-support santap file command (Added usage guidelines)	Show Commands
	show santap module dvt command
	show santap module dvtlun command
	show santap vttbl dvt command
	show santap vttbl dvt host command
SDV	show sdv command (Changed the command output)	Show Commands
	attribute failover auto command	A Commands
General Configuration	feature command	F Commands
DPVM	clear dpvm merge statistics command	C Commands
	show dpvm merge statistics command	Show Commands
	show dpvm merge status command
	dpvm overwrite-duplicate-pwwn command	D Commands
Generation 3 Modules	do command (Added the command output for extended receive bbcredit interface) (Added a Note)	D Commands
	show interface command (Added the command output for bbcredit information for a switch port) (Added the command output for interface capabilities on a 48 port line card)	Show Commands
	show module command (Added the command output for a module resource on a 24 port line card with all ports in shared mode) (Added the command output for a module resource on a 24 port line card with few ports in shared mode and few port in dedicated mode) (Added the command output for a module resource on a 12 port line card with all ports in dedicated mode) (Added the command output for a module resource on a 12 port line card with all ports in dedicated mode and extended feature enabled)	Show Commands
Hardware	show hardware fabric-mode command	Show Commands
	show version command (Changed the command output from SAN-OS to NX-OS)	Show Commands
	show hardware command (Changed the command output from SAN-OS to NX-OS)
	show copyright command (Changed the command output from SAN-OS to NX-OS)
Deprecated Commands (see the feature command for replacement commands)
	crypto ike enable command	C Commands
	dpvm enable command	D Commands
	fabric-binding enable command	F Commands
	fcip enable command
	fcsp enable command
	ficon enable command
	ivr enable command	I Commands
	port-security enable command	P Commands
	sdv enable command	S Commands
	tacacs+ enable command	T Commands
	Added DMM Commands
DMM	dmm module job command (Added the set-vi and modify rate keywords)	D Commands
	show dmm module command (Added the syntax description and the command output)	Show Commands
	Added SME Commands
SME	cluster command (Cluster command is replaced by the feature command)	C Commands
	show tech-support sme command (Added the command output)	Show Commands
	show role command (Added the command output)
	show sme cluster (Added the syntax description)
	show sme transport command (Added the syntax description)
	show debug command (Added the syntax description)
	delete command (Added the syntax description)	D Commands