Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference, Release 15.0(2)SE and Later - Preface [Cisco Blade Switches for Dell]

Table Of Contents

Preface

Audience

Purpose

Conventions

Related Publications

Obtaining Documentation and Submitting a Service Request

Preface

Audience

This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to manage the standalone Cisco Catalyst Blade Switch 3130 for Dell or blade switch stack, referred to as the switch. Before using this guide, you should have experience working with the Cisco IOS commands and the switch software features. Before using this guide, you should have experience working with the concepts and terminology of Ethernet and local area networking.

You install the switch in the Dell M1000e blade server chassis, referred to as the enclosure.

Purpose

This guide provides the information that you need about the Layer 2 and Layer 3 commands that have been created or changed for use with the switches. For information about the standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page by selecting Technical Support & Documentation > Cisco IOS Software.

This guide does not provide procedures for configuring your switch. For detailed configuration procedures, see the software configuration guide for this release.

This guide does not describe system messages you might encounter. For more information, see the system message guide for this release.

For documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

•Commands and keywords are in boldface text.

•Arguments for which you supply values are in italic.

•Square brackets ([ ]) means optional elements.

•Braces ({}) group required choices, and vertical bars ( | ) separate the alternative elements.

•Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element.

Interactive examples use these conventions:

•Terminal sessions and system displays are in screen font.

•Information you enter is in boldface screen font.

•Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes, cautions, and warnings use these conventions and symbols:

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Publications

These documents provide complete information about the switch and are available from this Cisco.com site:

http://www.cisco.com/en/US/products/ps8742/tsd_products_support_series_home.html

Note Before installing, configuring, or upgrading the switch, see these documents:

•For initial configuration information, see the "Configuring the Switch Module" section in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide.

•For device manager requirements, see the "System Requirements" section in the release notes.

•For Network Assistant requirements, see the Getting Started with Cisco Network Assistant.

•For upgrade information, see the "Downloading Software" section in the release notes.

•Release Notes for the Cisco Catalyst Blade Switch 3130 for Dell

•Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide

•Cisco Catalyst Blade Switch 3130 for Dell Command Reference

•Cisco Catalyst Blade Switch 3130 for Dell System Message Guide (not orderable but available on Cisco.com)

•Cisco Software Activation Document for Dell

•Device manager online help (available on the switch)

•Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide

•Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide

•Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3000 Series for Dell

•Device manager online help (available on the switch)

•Getting Started with Cisco Network Assistant

•Release Notes for Cisco Network Assistant

•Installation Note for the Cisco TwinGig Converter Module

•Cisco Small Form-Factor Pluggable Modules Installation Notes

•These compatibility matrix documents are available from this Cisco.com site:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.
html

–Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix

–Cisco 100-Megabit Ethernet SFP Modules Compatibility Matrix

–Cisco Small Form-Factor Pluggable Modules Compatibility Matrix

–Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules

•For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

	Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference, Release 15.0(2)SE and Later
	Preface
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference, Release 15.0(2)SE and Later Index Preface Using the Command-Line Interface Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Cisco IOS Commands - aaa accounting through reserved-only Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Cisco IOS Commands - rmon collection through show vtp Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Cisco IOS Commands - shutdown through vtp Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Boot Loader Commands Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Debug Commands Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Show Platform Commands Acknowledgments for Open-Source Software	Download this chapter Preface Download the complete book Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference, Release 15.0(2)SE and Later (PDF - 4 MB) Feedback Table Of Contents Preface Audience Purpose Conventions Related Publications Obtaining Documentation and Submitting a Service Request Preface Audience This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to manage the standalone Cisco Catalyst Blade Switch 3130 for Dell or blade switch stack, referred to as the switch. Before using this guide, you should have experience working with the Cisco IOS commands and the switch software features. Before using this guide, you should have experience working with the concepts and terminology of Ethernet and local area networking. You install the switch in the Dell M1000e blade server chassis, referred to as the enclosure. Purpose This guide provides the information that you need about the Layer 2 and Layer 3 commands that have been created or changed for use with the switches. For information about the standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page by selecting Technical Support & Documentation > Cisco IOS Software. This guide does not provide procedures for configuring your switch. For detailed configuration procedures, see the software configuration guide for this release. This guide does not describe system messages you might encounter. For more information, see the system message guide for this release. For documentation updates, see the release notes for this release. Conventions This publication uses these conventions to convey instructions and information: Command descriptions use these conventions: •Commands and keywords are in boldface text. •Arguments for which you supply values are in italic. •Square brackets ([ ]) means optional elements. •Braces ({}) group required choices, and vertical bars ( \| ) separate the alternative elements. •Braces and vertical bars within square brackets ([{ \| }]) mean a required choice within an optional element. Interactive examples use these conventions: •Terminal sessions and system displays are in `screen` font. •Information you enter is in boldface screen font. •Nonprinting characters, such as passwords or tabs, are in angle brackets (< >). Notes, cautions, and warnings use these conventions and symbols: Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Related Publications These documents provide complete information about the switch and are available from this Cisco.com site: http://www.cisco.com/en/US/products/ps8742/tsd_products_support_series_home.html Note Before installing, configuring, or upgrading the switch, see these documents: •For initial configuration information, see the "Configuring the Switch Module" section in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide. •For device manager requirements, see the "System Requirements" section in the release notes. •For Network Assistant requirements, see the Getting Started with Cisco Network Assistant. •For upgrade information, see the "Downloading Software" section in the release notes. •Release Notes for the Cisco Catalyst Blade Switch 3130 for Dell •Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide •Cisco Catalyst Blade Switch 3130 for Dell Command Reference •Cisco Catalyst Blade Switch 3130 for Dell System Message Guide (not orderable but available on Cisco.com) •Cisco Software Activation Document for Dell •Device manager online help (available on the switch) •Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide •Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide •Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3000 Series for Dell •Device manager online help (available on the switch) •Getting Started with Cisco Network Assistant •Release Notes for Cisco Network Assistant •Installation Note for the Cisco TwinGig Converter Module •Cisco Small Form-Factor Pluggable Modules Installation Notes •These compatibility matrix documents are available from this Cisco.com site: http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list. html –Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix –Cisco 100-Megabit Ethernet SFP Modules Compatibility Matrix –Cisco Small Form-Factor Pluggable Modules Compatibility Matrix –Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules •For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks