Table Of Contents
Cisco ASDM Release Notes Version 6.1
Introduction
New Features
ASDM Client PC Operating System and Browser Requirements
Supported Platforms and Feature Licenses
ASDM and SSM Compatibility
Upgrading ASDM and ASA
Getting Started with ASDM
Before You Begin
Downloading the ASDM Launcher
Starting ASDM from the ASDM Launcher
Using ASDM in Demo Mode
Starting ASDM from a Web Browser
Using the Startup Wizard
Using the IPsec VPN Wizard
Printing from ASDM
ASDM Limitations
Unsupported Commands
Effects of Unsupported Commands
Ignored and View-Only Commands
Discontinuous Subnet Masks Not Supported
Interactive User Commands Not Supported in ASDM CLI Tool
Miscellaneous Limitations
Caveats
Open Caveats - Version 6.1(1)
End-User License Agreement
Related Documentation
Obtaining Documentation and Submitting a Service Request
Cisco ASDM Release Notes Version 6.1
March 2008
This document contains release information for Cisco ASDM Version 6.1 on Cisco ASA 5500 Adaptive Series Security Appliances. It includes the following sections:
•
Introduction
•New Features
•Supported Platforms and Feature Licenses
•ASDM and SSM Compatibility
•Upgrading ASDM and ASA
•Getting Started with ASDM
•ASDM Limitations
•Caveats
•End-User License Agreement
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
Introduction
Cisco Adaptive Security Device Manager (ASDM) delivers world-class security management and monitoring services for Cisco ASA 5500 series adaptive security appliances through an intuitive, easy-to-use, web-based management interface. Bundled with supported security appliances, the device manager accelerates security appliance deployment with intelligent wizards, robust administration tools, and versatile monitoring services that complement the advanced security and networking features offered by Cisco ASA 5500 series adaptive security appliance software Version8.1. Its secure, web-based design enables anytime, anywhere access to security appliances.
Note ASDM 6.1 is compatible with Cisco ASA 5500 Adaptive Series Security Appliance versions 8.0 and 8.1, and Cisco PIX 500 Series Security Appliances version 8.0, but not earlier versions. The Cisco ASA 5580 Adaptive Series Security Appliance is only compatible with ASDM 6.1 and ASA version 8.1 software. For more information on platform support, see ASDM Version 6.1 Support by Platform.
New Features
Released: March 1, 2008
Table 1 lists the new features for ASA Version 8.1(1)/ASDM Version 6.1(1). This ASA software version is only supported on the ASA 5580.
Table 1 New Features for ASA Version 8.1(1)/ASDM Version 6.1(1)
Feature
|
Description
|
Introduction of the Cisco ASA 5580
|
The Cisco ASA 5580 comes in two models:
•The ASA 5580-20 delivers 5 Gigabits per second of TCP traffic and UDP performance is even greater. Many features in the system have been made multi-core capable to achieve this high throughput. In addition the system delivers greater than 60,000 TCP connections per second and supports up to 1 million connections.
•The ASA 5580-40 will deliver 10 Gigabits per second of TCP traffic and similar to ASA 5580-20 the UDP performance will be even greater. The ASA 5580-40 delivers greater than 120,000 TCP connections per second and up to 2 million connections in total.
In ASDM, see Home > System Resource Status and Home > Device Information > Environment Status.
|
NetFlow
|
The new NetFlow feature enhances the ASA logging capabilities by logging flow-based events through the NetFlow protocol. For detailed information about this feature and the new CLI commands, see the Cisco ASA 5580 Adaptive Security Appliance Command Line Configuration Guide.
In ASDM, see Configuration > Device Management > Logging > Netflow.
|
Jumbo frame support
|
The Cisco ASA 5580 supports jumbo frames when you enter the jumbo-frame reservation command. A jumbo frame is an Ethernet packet larger than the standard maximun of 1518 bytes (including Layer 2 header and FCS), up to 9216 bytes. You can enable support for jumbo frames for all interfaces by increasing the amount of memory to process Ethernet frames. Assigning more memory for jumbo frames might limit the the maximum use of other features, such as access lists.
In ASDM, see Configuration > Device Setup > Interfaces > Add/Edit Interface > Advanced.
|
Timeout for SIP Provisional Media
|
You can now configure the timeout for SIP provisional media using the timeout sip-provisional-media command.
In ASDM, see Configuration > Firewall > Advanced > Global Timeouts.
|
Details about the activation key
|
You can now view the permanent and temporary activation keys with their enabled features, including all previously installed temporary keys and their expiration dates using the show activation key detail command.
In ASDM in single context mode, see Configuration > Device Management > System Image/Configuration > Activation Key. In ASDM in multiple context mode, see System > Configuration > Device Management > Activation Key.
|
New ASDM online help engine
|
ASDM now supports a new look for the online help. The online help now maintains the topic-based selection of the user from the left bookmark pane while browsing through the right pane subject matter.
|
ASDM CPU Core Usage Graph
|
In single or multiple mode, the CPU core usage graph allows you to display the core CPU utilization status from the ASDM Home page.
|
Intelligent platform management interface (IPMI) for ASDM
|
Added support for intelligent platform management interface (IPMI), which provides the user with information on the status of the power supply, cooling fans, and temperature of the processors and chassis from the ASDM Home page.
|
ASDM Assistant
|
The ASDM Assistant is now available from View Menu, instead of the Tools Menu. The GUI has been changed to simplify the Search mechanism.
|
ASDM Backup and Restore Enhancement
|
The backup and restore enhancement allows you to back up configurations to the local machine and then restore them back on the server as necessary. Additionally, this feature backs up SSL VPN-related files. This feature is found in Tools > Backup Configuration, and Tools > Restore Configuration.
Also supported for Version 8.0.
|
ASDM Log Viewer
|
The Log viewer enhancement displays the source and destination port information parsed from the syslog messages. This information is displayed on the Monitoring > Logging > Real-Time Log Viewer, and Log Buffer page.
Also supported for Version 8.0.
|
Enhanced VPN Search in ASDM
|
Added a CLI command-based Search facility that offers intelligent hints while you are typing in keywords or a command. This search enhancement only exists on User Accounts, Connection Profiles, and Group Policies pages.
Also supported for Version 8.0.
|
ASDM Client PC Operating System and Browser Requirements
Table 2 lists the supported and recommended PC operating systems and browsers for ASDM Version 6.1.
Table 2 Operating System and Browser Requirements
Operating System
|
Version
|
Browser
|
Microsoft Windows1
|
Windows Vista
Windows 2003 Server
Windows XP
Windows 2000 (Service Pack 4 or higher)
|
Internet Explorer 6.0 or higher with Sun Java (JRE)2 1.4.2, 5.0 (1.5), or 6.0
Firefox 1.5 or higher with Sun Java (JRE) 1.4.2, 5.0 (1.5), or 6.0
|
Apple Macintosh®
|
Apple Macintosh OS X
|
Firefox 1.5 or higher or Safari 2.0 or higher withSun Java (JRE) 5.0 (1.5).
|
Linux
|
Red Hat Linux, Red Hat Enterprise Linux WS version 4 running GNOME or KDE
|
Firefox 1.5 or higher with Sun Java (JRE) 1.4.2, 5.0 (1.5), or 6.0
|
Supported Platforms and Feature Licenses
The following table lists the supported platforms specifically for ASDM 6.1:
Table 3 ASDM Version 6.1 Support by Platform
Hardware Platform
|
ASA Software Version
|
ASA 5580 Series
|
ASA 8.11
|
ASA 5500 Series2
|
ASA 8.1
ASA 8.0
|
PIX 5003 Series
|
PIX 8.0
|
For information on supported platforms and feature licenses, see:
http://www.cisco.com/en/US/docs/security/asa/asa81/release/notes/asarn81.html
ASDM and SSM Compatibility
Note SSMs are not supported on the ASA 5580 Adaptive Series Security Appliance.
Upgrading ASDM and ASA
This section describes how to upgrade ASDM and ASA to a new ASDM release. If you have a Cisco.com login, you can obtain ASDM from the following website:
http://www.cisco.com/public/sw-center/index.shtml
If you have a previous release of ASDM on your security appliance and want to upgrade to the latest release, you can do so from within ASDM. We recommend that you upgrade the ASDM image before the platform image. ASDM is backwards compatible, so you can upgrade the platform image using the new ASDM; you cannot use an old ASDM with a new platform image.
Note ASDM 6.1 is compatible with Cisco ASA 5500 Adaptive Series Security Appliance versions 8.0 and 8.1, and Cisco PIX 500 Series Security Appliances version 8.0, but not earlier versions. The Cisco ASA 5580 Adaptive Series Security Appliance is only compatible with ASDM 6.1 and ASA version 8.1 software. For more information on platform support, see ASDM Version 6.1 Support by Platform.
To upgrade ASDM, perform the following steps:
Step 1 Download the new ASDM image to your PC.
Optionally, you can download a new platform image to your PC if the installed image is earlier than 8.0.
Step 2 Launch ASDM.
Step 3 From the Tools menu:
a. In ASDM 5.0 and 5.1, click Tools > Upload Image from Local PC.
b. In ASDM 5.2, click Tools > Upgrade Software.
c. In ASDM 6.0, click Tools > Upload Software from Local Computer.
Step 4 With ASDM selected, click Browse Local to select the new ASDM image.
Step 5 To specify the location in Flash memory where you want to install the new image, enter the directory path in the field or click Browse Flash.
If your security appliance does not have enough memory to hold two ASDM images, overwrite the old image with the new one by specifying the same destination filename. You can rename the image after it was uploaded using the Tools > File Management tool.
If you have enough memory for both versions, you can specify a different name for the new version. If you need to revert to the old version, it is still in your Flash memory.
Step 6 Click Upload Image.
When ASDM is finished uploading, the following message appears:
"ASDM Image is Uploaded to Flash Successfully."
Step 7 For Version 5.x only: If the new ASDM image has a different name than the old image, then you must configure the security appliance to load the new image. Use the Configuration > Properties > Device Administration > Boot System/Configuration panel.
Step 8 If installing a new platform image, download the new platform image using the Tools > Upgrade Software tool with ASA or PIX selected.
If your security appliance does not have enough memory to hold two ASDM images, overwrite the old image with the new one by specifying the same destination filename. You can rename the image after it was uploaded using the Tools > File Management tool.
Step 9 If installing a new image, select ASA as the new image, and reload the security appliance using the
Tools > System Reload tool.
Make sure to choose "Save the running configuration at time of reload".
Step 10 To run the new ASDM image, exit ASDM and reconnect.
Getting Started with ASDM
This section describes how to connect to ASDM and start your configuration. If you are using the security appliance for the first time, your security appliance might include a default configuration. You can connect to a default IP address with ASDM so that you can immediately start to configure the security appliance from ASDM. If your platform does not support a default configuration, you can log in to the CLI and run the setup command to establish connectivity. See Before You Begin for more detailed information about networking.
This section includes the following topics:
•Before You Begin
•Downloading the ASDM Launcher
•Starting ASDM from the ASDM Launcher
•Using ASDM in Demo Mode
•Starting ASDM from a Web Browser
•Using the Startup Wizard
•Using the IPsec VPN Wizard
•Printing from ASDM
Before You Begin
If your security appliance includes a factory default configuration, you can connect to the default management address of 192.168.1.1 with ASDM. On the ASA 5500 series Adaptive Security Appliance, the interface to which you connect with ASDM is Management 0/0. To restore the default configuration, enter the configure factory-default command at the security appliance CLI.
It is also recommended that you install the recommended version of Java before you begin the installation.
Make sure the PC is on the same network as the security appliance. You can use DHCP on the client to obtain an IP address from the security appliance, or you can set the IP address to a 192.168.1.0/24 network address.
If your platform does not support the factory default configuration, or you want to add to an existing configuration to make it accessible for ASDM, access the security appliance CLI according to the Cisco Security Appliance Command Line Configuration Guide, and enter the setup command.
Note If your platform does not support the factory default configuration, running the setup command may remove any existing configuration.
You must have an inside interface already configured to use the setup command. Before using the setup command, enter the interface gigabitethernet slot/port command, and then the nameif inside command. The slot for interfaces that are built in to the chassis is 0. For example, enter interface gigabitethernet 0/1.
The ASA 5510 Adaptive Security Appliance has an Ethernet-type interface. When using the using the setup command, remember that the interface ID is dependent upon the platform. For example, on PIX 500 series, enter the interface ethernet slot/port. On ASA, enter interface gigabitethernet slot/port command.
Downloading the ASDM Launcher
The ASDM Launcher is for Windows only. The ASDM Launcher is an improvement over running ASDM in a browser. The ASDM Launcher avoids double authentication and certificate dialog boxes, launches faster, and caches previously-entered IP addresses and usernames.
To download the ASDM Launcher, perform the following steps:
Step 1 From a supported web browser on the security appliance network, enter the following URL:
https://interface_ip_address/admin
In transparent firewall mode, enter the management IP address.
Note Be sure to enter https, not http.
Step 2 Click OK or Yes to all prompts, including the name and password prompt. By default, leave the name and password blank.
A page displays with the following buttons:
•Download ASDM Launcher and Start ASDM
•Run ASDM in a browser
Step 3 Click Download ASDM Launcher and Start ASDM.
The installer downloads to your PC.
Step 4 Run the installer to install the ASDM Launcher.
Starting ASDM from the ASDM Launcher
The ASDM Launcher is for Windows only.
To start ASDM from the ASDM Launcher, perform the following steps:
Step 1 Double-click the Cisco ASDM Launcher shortcut on your desktop, or start it from the Start menu.
Step 2 Enter the security appliance IP address or hostname, your username, and your password, and then click OK.
If there is a new version of ASDM on the security appliance, the ASDM Launcher automatically downloads it before starting ASDM.
Using ASDM in Demo Mode
ASDM Demo Mode is available as a separately installed application running under Windows. It makes use of the ASDM Launcher and pre-packaged configuration files to let you run ASDM without having a live device available. ASDM Demo Mode lets you:
•Demonstrate ASDM or security appliance features using the ASDM interface.
•Perform configuration and select monitoring tasks via ASDM as though you were interacting with a real device.
ASDM Demo Mode provides simulated monitoring data, including real-time system log messages. The data shown is randomly generated, but the experience is identical to what you would see when connecting to a real device.
ASDM Demo Mode has the following limitations:
•Changes made to the configuration will appear in the GUI but are not applied to the configuration file. That is, when you click the Refresh button, it will revert back to the original configuration. The changes are never saved to the configuration file.
•File/Disk operations are not supported.
•Monitoring and logging data are simulated. Historical monitoring data is not available.
•You can only log in as an admin user; you cannot log in as a monitor-only or read-only user.
•Demo Mode does not support the following features:
–File menu:
Reset Device to the Factory Default Configuration
Save Running Configuration to Flash
Save Running Configuration to TFTP Server
Save Running Configuration to Standby Unit
Save Internal Log Buffer to Flash
Clear Internal Log Buffer
–Tools menu:
Command Line Interface
Ping
Traceroute
File Management
Upgrade Software from Local Computer
Upgrade Software from Cisco.com
Backup Configurations
Restore Configurations
System Reload
Administrator's Alert to Clientless SSL VPN Users
–Toolbar/Status bar > Save
–Configuration > Interface > Edit Interface > Renew DHCP Lease
–Failover—Configuring a standby device
•These operations cause a reread of the configuration and therefore will revert the configuration back to the original settings.
–Switching contexts
–Making changes in the Interface panel
–NAT panel changes
–Clock panel changes
To run ASDM in Demo Mode, perform the following steps:
Step 1 If you have not yet installed the Demo Mode application, perform the following steps:
a. Download the ASDM Demo Mode installer from the following website:
http://www.cisco.com/cisco/software/navigator.html
The filename is asdm-demo-611.msi.
b. Double-click the installer to install the software.
Step 2 Double-click the Cisco ASDM Launcher shortcut on your desktop, or start it from the Start menu.
Step 3 Check Run in Demo Mode.
Step 4 To set the platform, context and firewall modes, and ASDM Version, click Demo and make your selections from the Demo Mode area.
Step 5 To use new ASDM images as they come out, you can either download the latest installer, or you can download the normal ASDM images and install them for Demo Mode:
a. Download the image from the download page (see Step 1).
The filename is asdm-version.bin.
b. In the Demo Mode area, click Install ASDM Image.
A file browser appears. Find the ASDM image file in the browser.
Step 6 Click OK to launch ASDM Demo Mode.
You see a Demo Mode label in the title bar of the window.
Starting ASDM from a Web Browser
To start ASDM from a web browser, perform the following steps:
Step 1 From a supported web browser on the security appliance network, enter the following URL:
https://interface_ip_address/admin
In transparent firewall mode, enter the management IP address.
Note Be sure to enter https, not http.
Step 2 Click OK or Yes to all browser prompts, including the name and password prompt. By default, leave the name and password blank.
A page displays with the following buttons:
•Install ASDM Launcher and Run ASDM
Step 3 Click Run ASDM.
Step 4 Click OK or Yes to all Java prompts, including the name and password prompt. By default, leave the name and password blank.
Using the Startup Wizard
The Startup Wizard helps you easily configure a single mode security appliance or a context in multiple context mode.
To use the Startup Wizard to configure the basic setup of the security appliance, perform the following steps:
Step 1 Launch the wizard according to the steps for the correct security context mode.
•In single context mode, click Wizards > Startup Wizard.
•In multiple context mode, for each new context, perform the following steps:
a. Create a new context using the System > Configuration > Security Context pane.
b. Be sure to allocate interfaces to the context.
c. When you apply the changes, ASDM prompts you to use the Startup Wizard.
d. Click the System/Contexts icon on the toolbar, and choose the context name.
e. Click Wizards > Startup Wizard.
Step 2 Click Next as you proceed through the Startup Wizard screens, filling in the appropriate information in each screen, such as device name, domain name, passwords, interface names, IP addresses, basic server configuration, and access permissions.
Step 3 Click Finish on the last pane to transmit the configuration to the security appliance. Reconnect to ASDM using the new IP address, if the IP address of the connection changes.
Step 4 Enter other configuration details on the Configuration panes.
Using the IPsec VPN Wizard
The IPsec VPN Wizard configures basic VPN access for LAN-to-LAN or remote client access. The VPN Wizard is available only for security appliances running in single context mode and routed (not transparent) firewall mode.
To use the VPN Wizard to configure VPN, perform the following steps:
Step 1 Click Wizards > VPN Wizard.
Step 2 Supply information on each wizard pane. Click Next to move through the VPN Wizard panes. You may use the default IPSec and IKE policies. Click Help for more information about each field.
Step 3 After you complete the VPN Wizard information, click Finish on the last pane to transmit the configuration to the security appliance.
Printing from ASDM
Note Printing is supported only for Microsoft Windows 2000 or XP in this release.
ASDM supports printing for the following features:
•The Configuration > Interfaces table
•All Configuration > Security Policy tables
•All Configuration > NAT tables
•The Configuration > VPN > IPSec > IPSec Rules table
•Monitoring > Connection Graphs and its related table
ASDM Limitations
This section describes ASDM limitations, and includes the following topics:
•Unsupported Commands
•Interactive User Commands Not Supported in ASDM CLI Tool
•Miscellaneous Limitations
Unsupported Commands
ASDM does not support the complete command set of the CLI. For any CLI configuration that ASDM does not support, the commands remain unchanged in the configuration.
Effects of Unsupported Commands
•If ASDM loads an existing running configuration and finds IPv6-related commands, ASDM displays a dialog box informing you that it does not support IPv6. You cannot configure any IPv6 commands in ASDM, but all other configuration is available.
•If ASDM loads an existing running configuration and finds other unsupported commands, ASDM operation is unaffected. To view the unsupported commands, choose Tools > Show Commands Ignored by ASDM on Device.
•If ASDM loads an existing running configuration and finds the alias command, it enters Monitor-only mode.
Monitor-only mode allows access to the following functions:
–The Monitoring area
–The CLI tool (Tools > Command Line Interface), which lets you use the CLI commands
To exit Monitor-only mode, use the CLI tool or access the security appliance console, and remove the alias command. You can use outside NAT instead of the alias command. See the Cisco Security Appliance Command Reference for more information.
Note You might also be in Monitor-only mode because your user account privilege level, indicated in the status bar at the bottom of the main ASDM window, was set up as less than or equal to three by your system administrator, which allows Monitor-only mode. For more information, choose Configuration > > Device Management > Users/AAA > User Accounts and
Configuration > Device Management > Users/AAA > AAA Access.
Ignored and View-Only Commands
The following table lists commands that ASDM supports in the configuration when you add them through the CLI, but that you cannot add or edit in ASDM. If ASDM ignores the command, it does not appear in the ASDM GUI at all. If the command is view-only, then it appears in the GUI, but you cannot edit it.
Unsupported Commands
|
ASDM Behavior
|
access-list
|
Ignored if not used, except for use in VPN group policy screens
|
established
|
Ignored
|
failover timeout
|
Ignored
|
icmp unreachable rate-limit
|
Ignored
|
ignore-ipsec-keyusage
|
Ignored; under the "crypto ca trustpoint <tp-name>" mode.
|
ignore-ssl-keyusage
|
Ignored; under the "crypto ca trustpoint <tp-name>" mode.
|
ipv6, any IPv6 addresses
|
Ignored
|
pager
|
Ignored
|
pim accept-register route-map
|
Ignored. You can only configure the list option using ASDM.
|
prefix-list
|
Ignored if not used in an OSPF area
|
route-map
|
Ignored
|
service-policy global
|
Ignored if it uses a match access-list class. For example:
access-list myacl line 1 extended permit ip
any any
service-policy mypm global
|
sysopt nodnsalias
|
Ignored
|
sysopt uauth allow-http-cache
|
Ignored
|
system internal and all subcommands
|
Ignored
|
terminal
|
Ignored
|
Discontinuous Subnet Masks Not Supported
ASDM does not support discontinuous subnet masks such as 255.255.0.255. For example, you cannot use the following:
ip address inside 192.168.2.1 255.255.0.255
Interactive User Commands Not Supported in ASDM CLI Tool
The ASDM CLI tool does not support interactive user commands. If you enter a CLI command that requires interactive confirmation, ASDM prompts you to enter "[yes/no]" but does not recognize your input. ASDM then times out waiting for your response.
For example:
1. From the ASDM Tools menu, click Command Line Interface.
2. Enter the command: crypto key generate rsa
ASDM generates the default 1024-bit RSA key.
3. Enter the command again: crypto key generate rsa
Instead of regenerating the RSA keys by overwriting the previous one, ASDM displays the following error:
Do you really want to replace them? [yes/no]:WARNING: You already have RSA
ke0000000000000$A key
Input line must be less than 16 characters in length.
%Please answer 'yes' or 'no'.
Do you really want to replace them [yes/no]:
%ERROR: Timed out waiting for a response.
ERROR: Failed to create new RSA keys names <Default-RSA-key>
Workaround:
•You can configure most commands that require user interaction by means of the ASDM panes.
•For CLI commands that have a noconfirm option, use this option when entering the CLI command. For example:
crypto key generate rsa noconfirm
Miscellaneous Limitations
•Configuration > Remote Access VPN > Secure Desktop Manager is not supported.
•Dynamic Access Policies, located in Configuration > Remote Access VPN > Network (Client) Access and Configuration > Remote Access VPN > Clientless SSL VPN Access, have limited support because it depends on Secure Desktop Manager which is not supported.
Caveats
The following sections describes the open caveats for Version 6.1(1).
Note If you are a registered cisco.com user, view Bug Toolkit on cisco.com at the following website:
http://tools.cisco.com/Support/BugToolKit/
To become a registered cisco.com user, go to the following website:
http://tools.cisco.com/RPF/register/register.do
Open Caveats - Version 6.1(1)
The following list shows caveats that are opened for Version 6.1(1):
Table 4 Open ASDM Caveats
ID Number
|
Software Version 6.1(1)
|
Corrected
|
Caveat Title
|
CSCsk41460
|
|
Need to validate different GE/10GE interfaces to one redundant interface.
|
CSCsk49384
|
|
Deleted interfaces still shows in user context.
|
CSCsl50642
|
|
Add/Del Interface through CLI not shown in ASDM home page.
|
CSCsm66235
|
|
ACL manager in ASDM 6.0(3) does not display standard ACLs.
|
CSCsm85034
|
|
ASDM refresh errors after failover - no response for 60 secs warning.
|
CSCsm85594
|
|
ntp: add server without interface, then edit, shows first interface.
|
CSCsm91240
|
|
Boot image config empty after switch from multiple to single context mode.
|
CSCsm92154
|
|
ASDM: Java Exception when non-numerical entered into CRL port field.
|
CSCsm92524
|
|
HT:Exception generated when accessing Real-time Log Viewer in context.
|
CSCsm95257
|
|
ASDM: ACL with trailing remark causes ASDM to add bogus remarks to ACL.
|
End-User License Agreement
For infromation on the end-user license agreement, go to:
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
Related Documentation
For additional information on ASDM or its platforms, see the ASDM online Help or the following documentation found on Cisco.com:
•Cisco ASA 5500 Series Hardware Installation Guide
•Cisco ASA 5500 Series Getting Started Guide
•Cisco ASA 5500 Series Release Notes
•Migrating to ASA for VPN 3000 Series Concentrator Administrators
•Cisco Security Appliance Command Line Configuration Guide
•Cisco Security Appliance Command Reference
•Release Notes for Cisco Intrusion Prevention System 5.0
•Installing and Using Cisco Intrusion Prevention System Device Manager 5.0
•Release Notes for Cisco Intrusion Prevention System 5.1
•Installing and Using Cisco Intrusion Prevention System Device Manager 5.1
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
© 2007 Cisco Systems, Inc.
All rights reserved.
Feedback
