Feedback
Onboard Failure Logging Commands
Related Documents
This module describes the Cisco IOS XR software commands used to configure onboard failure logging (OBFL) for system monitoring on the router. OBFL gathers boot, environmental, and critical hardware failure data for field-replaceable units (FRUs), and stores the information in the nonvolatile memory of the FRU. This information is used for troubleshooting, testing, and diagnosis if a failure or other error occurs.
Because OBFL is on by default, data is collected and stored as soon as the card is installed. If a problem occurs, the data can provide information about historical environmental conditions, uptime, downtime, errors, and other operating conditions.
Caution
OBFL is activated by default in all cards and should not be deactivated. OBFL is used to diagnose problems in FRUs and to display a history of FRU data.
For detailed information about OBFL concepts, configuration tasks, and examples, see the Onboard Failure Logging Services module in the System Monitoring Configuration Guide for Cisco NCS 6000 Series Routers.
For detailed information about logging concepts, configuration tasks, and examples, see the Implementing Logging Services module in the System Monitoring Configuration Guide for Cisco NCS 6000 Series Routers.
For alarm management and logging correlation commands, see the Alarm Management and Logging Correlation Commands module in the System Monitoring Command Reference for Cisco NCS 6000 Series Routers.
For detailed information about alarm and logging correlation concepts, configuration tasks, and examples, see the Implementing Alarm Logs and Logging Correlation module in the System Monitoring Configuration Guide for Cisco NCS 6000 Series Routers.
show logging onboard
To display the onboard failure logging (OBFL) messages, use the show logging onboard command in or System Admin EXEC mode.
show logging onboard { fpd | inventory | temperature | uptime | voltage } [ location node-id ] [verbose]
Syntax Description
fpd
Displays the OBFL FPD data information.
inventory
Displays the OBFL inventory data information.
temperature
Displays temperature information.
uptime
Displays the OBFL uptime.
voltage
Displays voltage information.
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the show logging onboard command to display all logging messages for OBFL.
To narrow the output of the command, enter the show logging onboard command with one of the optional keywords.
Use the location node-id keyword and argument to display OBFL messages for a specific node.
Task ID
Examples
This example displays uptime information from the OBFL feature:
sysadmin-vm:0_RP0# show logging onboard uptime detail location 0/7/cpu0 ------------------------------------------------------------------------------- UPTIME CONTINUOUS DETAIL INFORMATION (Node: node0_7_CPU0) ------------------------------------------------------------------------------- The first record : 01/05/2007 00:58:41 The last record : 01/17/2007 16:07:13 Number of records : 478 File size : 15288 bytes Current reset reason : 0x00 Current uptime : 0 years 0 weeks 0 days 3 hours 0 minutes ------------------------------------------------------------------------------- Time Stamp | MM/DD/YYYY HH:MM:SS | Users operation ------------------------------------------------------------------------------- 01/05/2007 01:44:35 File cleared by user request. -------------------------------------------------------------------------------This example displays continuous information about the temperature:
sysadmin-vm:0_RP0# show logging onboard temperature continuous RP/0/RSP1/CPU0:ios(admin)#show logging onboard temperature continuous Fri Dec 11 02:22:16.247 UTC ------------------------------------------------------------------------------- TEMPERATURE CONTINUOUS INFORMATION (Node: node0_RSP0_CPU0) ------------------------------------------------------------------------------- Sensor | ID | ------------------------------------------------------------------------------- Inlet0 0x1 Hotspot0 0x2 ------------------------------------------------------------------------------- Time Stamp |Sensor Temperature C MM/DD/YYYY HH:MM:SS | 1 2 3 4 5 6 7 8 9 10 ------------------------------------------------------------------------------- 11/24/2009 20:55:28 23 36 11/24/2009 21:08:47 22 36 +32 minutes 22 37 +32 minutes 22 37This example displays raw information about the temperature:
sysadmin-vm:0_RP0# show logging onboard temperature raw Feature: Temperature node: node0_2_CPU0, file name: nvram:/temp_cont, file size: 47525 00000000: 00 29 01 02 45 79 d8 a8 00 00 00 00 00 00 ba 37 .)..Ey.........7 00000010: aa 0d 00 00 45 79 d8 a8 1c 18 2b 2c 2f 1d 28 27 ....Ey....+,/.(' 00000020: 1b 26 2a 20 27 00 00 fa fa 00 1f 01 02 45 79 da .&* '........Ey. 00000030: 2b 00 00 00 00 00 00 ba 38 ca 0d 00 06 00 00 00 +.......8....... 00000040: 0f 00 00 00 00 00 fa fa 00 1f 01 02 45 79 db ae ............Ey.. 00000050: 00 00 00 00 00 00 ba 39 ca 0d 00 06 00 00 00 00 .......9........ 00000060: 00 f0 00 00 00 fa fa 00 1f 01 02 45 79 dd 32 00 ...........Ey.2. 00000070: 00 00 00 00 00 ba 3a ca 0d 00 06 00 00 00 00 00 ......:......... 00000080: 00 00 00 00 fa fa 00 1f 01 02 45 79 de b8 00 00 ..........Ey.... 00000090: 00 00 00 00 ba 3b ca 0d 00 06 00 00 00 00 00 10 .....;.......... 000000a0: 00 00 00 fa fa 00 1f 01 02 45 79 e0 3c 00 00 00 .........Ey.<... 000000b0: 00 00 00 ba 3c ca 0d 00 06 00 00 01 00 00 00 00 ....<........... 000000c0: 00 00 fa fa 00 1f 01 02 45 79 e1 be 00 00 00 00 ........Ey...... 000000d0: 00 00 ba 3d ca 0d 00 06 11 00 00 00 00 00 00 00 ...=............ 000000e0: 00 fa fa 00 1f 01 02 45 79 e3 43 00 00 00 00 00 .......Ey.C..... 000000f0: 00 ba 3e ca 0d 00 06 ff 00 0f 00 00 00 00 00 00 ..>............. 00000100: fa fa 00 1f 01 02 45 79 e4 c6 00 00 00 00 00 00 ......Ey........ 00000110: ba 3f ca 0d 00 06 00 00 00 00 00 00 00 00 00 fa .?.............. 00000120: fa 00 1f 01 02 45 79 e6 49 00 00 00 00 00 00 ba .....Ey.I....... 00000130: 40 ca 0d 00 06 00 00 00 00 00 00 00 00 00 fa fa @............... 00000140: 00 1f 01 02 45 79 e7 cc 00 00 00 00 00 00 ba 41 ....Ey.........A 00000150: ca 0d 00 06 00 00 00 10 00 f0 00 00 00 fa fa 00 ................ 00000160: 1f 01 02 45 79 e9 4f 00 00 00 00 00 00 ba 42 ca ...Ey.O.......B. 00000170: 0d 00 06 00 00 00 f0 00 10 00 00 00 fa fa 00 1f ................ 00000180: 01 02 45 79 ea d2 00 00 00 00 00 00 ba 43 ca 0d ..Ey.........C.. 00000190: 00 06 00 00 01 01 00 00 00 00 00 fa fa 00 1f 01 ................ 000001a0: 02 45 79 ec 55 00 00 00 00 00 00 ba 44 ca 0d 00 .Ey.U.......D... 000001b0: 06 01 00 00 10 00 00 00 00 00 fa fa 00 1f 01 02 ................ 000001c0: 45 79 ed d8 00 00 00 00 00 00 ba 45 ca 0d 00 06 Ey.........E.... 000001d0: 0f 00 0f ff 00 00 00 00 00 fa fa 00 1f 01 02 45 ...............E
