 Feedback
|
Table Of Contents
Release Notes for Cisco CRS-1 and Cisco CRS-3 for Cisco IOS XR Software Release 4.1
Determining Your Software Version
Cisco CRS-1 show version Output
Cisco CRS-3 show version Output
New Cisco CRS Router Software Features
Online Diagnostics Enhancements
FabSRCC Test on Cisco CRS-3 Line Cards
New Hardware Features for the Cisco CRS Router
New DWDM Configuration Requirement
Summary of Important DWDM Changes in Cisco IOS XR Software Release 3.9.0 and Later Releases
Configuration Examples in Cisco IOS XR Software Release 3.9.0 and Later Releases
Minimum Flash Disk Requirements When Upgrading to Release 4.1
Caveats Specific to the Cisco CRS-1 Router
Caveats Specific to the Cisco CRS-3 Router
Upgrading Cisco IOS XR Software
Migrating Cisco CRS-1 to Cisco CRS-3
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco CRS-1 and Cisco CRS-3 for Cisco IOS XR Software Release 4.1
March 15, 2013
Cisco IOS XR Software Release 4.1
Text Part Number OL-24745-04
These release notes describe the features provided in the Cisco IOS XR Software Release 4.1 for the Cisco CRS Router and are updated as needed.
Note
For information on the Cisco CRS Router running Cisco IOS XR Software Release 4.1, see the "Important Notes" section.
You can find the most current Cisco IOS XR software documentation at
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
These electronic documents may contain updates and modifications. For more information on obtaining Cisco documentation, see the "Obtaining Documentation and Submitting a Service Request".
For a list of software caveats that apply to Cisco IOS XR Software Release 4.1, see the "Caveats" section. The caveats are updated for every release and are described at www.cisco.com.
We recommend that you view the field notices for this release located at the following URL to see if your software or hardware platforms are affected:
http://www.cisco.com/public/support/tac/fn_index.html
Contents
These release notes contain the following sections:
•
•
•
•
•
•
Introduction
Cisco IOS XRsoftware is a distributed operating system designed for continuous system operation combined with service flexibility and high performance.
Cisco IOS XR software running on the Cisco CRS Router provides the following features and benefits:
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
For more information about new features provided on the Cisco CRS Router for Cisco IOS XR Software Release 4.1, see the "New Cisco CRS Router Software Features" section in this document.
System Requirements
This section describes the system requirements for Cisco IOS XR Software Release 4.1 supported on the Cisco CRS Router. The system requirements include the following information:
•
To determine the software versions or levels of your current system, see the "Determining Your Software Version" section.
Cisco CRS-1 Feature Set Table
Cisco IOS XR software is packaged in feature sets (also called software images). Each feature set contains a specific set of Cisco IOS XR Software Release 4.1 features.
Table 1 lists the Cisco IOS XR software feature set matrix (PIE files) and associated filenames available for the Cisco IOS XR Software Release 4.1 supported on the Cisco CRS-1 Series Router.
Table 1 Cisco CRS-1 Supported Feature Sets
(Cisco IOS XR Software Release 4.1 PIE Files)Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-p-4.1.0
Contains the required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-p.vm-4.1.0
Contains the required core packages including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR Manageability Package
hfr-mgbl-p.pie-4.1.0
Cisco IOS XR MPLS Package
hfr-mpls-p.pie-4.1.0
MPLS-TE,4 LDP,5 MPLS Forwarding, MPLS OAM,6 LMP,7 OUNI,8 RSVP,9 and Layer-2 VPN and Layer-3 VPN.
Cisco IOS XR Multicast Package
hfr-mcast-p.pie-4.1.0
Multicast Routing Protocols (PIM, MSDP,10 IGMP,11 Auto-RP), Tools (SAP, MTrace), and Infrastructure (MRIB,12 MURIB13 , MFWD14 ), and BIDIR-PIM.15
Cisco IOS XR Security Package
hfr-k9sec-p.pie-4.1.0
Support for Encryption, Decryption, IPSec,16 SSH,17 SSL,18 and PKI19 (Software based IPSec support—maximum of 500 tunnels)
Cisco IOS XR FPD Package
hfr-fpd-p.pie-4.1.0
Firmware for Fixed PLIM20 and SPA21 modules as well as ROMMON22 images for Cisco CRS chassis.
Cisco IOS XR Diagnostic Package
hfr-diags-p.pie-4.1.0
Diagnostic utilities for Cisco IOS XR routers.
Cisco IOS XR Documentation Package
hfr-doc-p.pie-4.1.0
.man pages for Cisco IOS XR software on the Cisco CRS chassis.
Cisco IOS XR Carrier Grade NAT Package
hfr-cgn-p.pie-4.1.0
Support for Carrier Grade NAT on Cisco CRS routers.
1 Packages are installed individually
2 Common Object Request Broker Architecture
3 Extensible Markup Language
4 MPLS Traffic Engineering
5 Label Distribution Protocol
6 Operations, Administration, and Maintenance
7 Link Manager Protocol
8 Optical User Network Interface
9 Resource Reservation Protocol
10 Multicast Source Discovery Protocol
11 Internet Group Management Protocol
12 Multicast Routing Information Base
13 Multicast-Unicast RIB
14 Multicast forwarding
15 Bidirectional Protocol Independent Multicast
16 IP Security
17 Secure Shell
18 Secure Socket Layer
19 Public-key infrastructure
20 Physical layer interface module
21 Shared port adapters
22 ROM monitor
Table 2 lists the Cisco CRS-1 Router TAR files.
Cisco CRS-3 Feature Set Table
Table 3 lists the Cisco IOS XR software feature set matrix (PIE files) and associated filenames available for the Cisco IOS XR Software Release 4.1 supported on the Cisco CRS-3 Router.
Table 3 Cisco CRS-3 Supported Feature Sets
(Cisco IOS XR Software Release 4.1 PIE Files)Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-px-4.1.0
Contains the required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR IP Unicast Routing Core Bundle
hfr-mini-px.vm-4.1.0
Contains the required core packages including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, and Alarm Correlation.
Cisco IOS XR Manageability Package
hfr-mgbl-px.pie-4.1.0
Cisco IOS XR MPLS Package
hfr-mpls-px.pie-4.1.0
MPLS-TE,4 LDP,5 MPLS Forwarding, MPLS OAM,6 LMP,7 OUNI,8 RSVP,9 and Layer-2 VPN and Layer-3 VPN.
Cisco IOS XR Multicast Package
hfr-mcast-px.pie-4.1.0
Multicast Routing Protocols (PIM, MSDP,10 IGMP,11 Auto-RP), Tools (SAP, MTrace), and Infrastructure (MRIB,12 MURIB13 , MFWD14 ), and BIDIR-PIM.15
Cisco IOS XR Security Package
hfr-k9sec-px.pie-4.1.0
Support for Encryption, Decryption, IPSec,16 SSH,17 SSL,18 and PKI19 (Software based IPSec support—maximum of 500 tunnels)
Cisco IOS XR FPD Package
hfr-fpd-px.pie-4.1.0
Firmware for Fixed PLIM20 and SPA21 modules as well as ROMMON22 images for Cisco CRS chassis.
Cisco IOS XR Diagnostic Package
hfr-diags-px.pie-4.1.0
Diagnostic utilities for Cisco IOS XR routers.
Cisco IOS XR Documentation Package
hfr-doc-px.pie-4.1.0
.man pages for Cisco IOS XR software on the Cisco CRS chassis.
Cisco IOS XR Carrier Grade NAT Package
hfr-cgn-px.pie-4.1.0
Support for Carrier Grade NAT on Cisco CRS routers.
1 Packages are installed individually
2 Common Object Request Broker Architecture
3 Extensible Markup Language
4 MPLS Traffic Engineering
5 Label Distribution Protocol
6 Operations, Administration, and Maintenance
7 Link Manager Protocol
8 Optical User Network Interface
9 Resource Reservation Protocol
10 Multicast Source Discovery Protocol
11 Internet Group Management Protocol
12 Multicast Routing Information Base
13 Multicast-Unicast RIB
14 Multicast forwarding
15 Bidirectional Protocol Independent Multicast
16 IP Security
17 Secure Shell
18 Secure Socket Layer
19 Public-key infrastructure
20 Physical layer interface module
21 Shared port adapters
22 ROM monitor
Table 4 lists the Cisco CRS-3 Router TAR files.
Memory Requirements
Caution
The minimum memory requirements for a Cisco CRS running Cisco IOS XR Software Release 4.1 consist of the following:
•
•
•
•
•
Hardware Supported
All hardware features are supported on Cisco IOS XR software, subject to the memory requirements specified in the "Memory Requirements" section.
Table 5 lists the supported hardware components on the Cisco CRS and the minimum required software versions. For more information, see the "Other Firmware Support" section.
Note
Hardware Not Supported
The following hardware is not supported in Cisco IOS XR Release 4.1:
RP-B with CRS-3 is not supported for Multichassis systems; only PRP is supported for such systems. Cisco highly recommends PRP for all CRS-1, CRS-3 Single chassis and Multichassis configurations, due to its significant advantages in improving boot time, performance, and scale. For information on End-of-Sale and End-of-Life Announcement for the Cisco CRS 8-Slot and 16-slot Line Card Chassis Route Processors:
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5763/end_of_life_notice_c51-695816.html
http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5763/end_of_life_notice_c51-695817.html
Note
CRS FP-140 Licenses
The following licenses apply to the CRS FP-140:
Software Compatibility
Cisco IOS XR Software Release 4.1 is compatible with the following Cisco CRS-1 systems:
•
•
•
•
Cisco IOS XR Software Release 4.1 is compatible with the following Cisco CRS-3 systems:
•
•
•
Other Firmware Support
The Cisco CRS supports the following firmware code:
•
http://www.cisco.com/en/US/products/ps5763/products_installation_and_configuration_guides_list.html•
•
•
Check the firmware needed by running the show fpd package command in admin mode.
Cisco CRS-1 show fpd package Output
15:25:27 PDT Thu Apr 07 2011=============================== ================================================Field Programmable Device Package================================================SW Min Req Min ReqCard Type FPD Description Type Subtype Version SW Ver HW Vers==================== ========================== ==== ======= =========== ======== ========S2 FPGA 4.02 lc fpga2 4.02 0.0 0.0FPGA 5.00 lc fpga3 5.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------140G-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Fabric HS123 Superst FPGA 4.00 lc fpga2 4.00 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------140G-4-S1S2S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------140G-S1S3 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------140G-S1S2S3-2 FPGA 4.01 lc fpga2 4.01 0.0 0.0FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------140G-MSC FPGA Linecard 0.35 lc fpga2 0.35 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.03 kensho lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 kensho lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------FP-140G FPGA Linecard 0.35 lc fpga2 0.35 0.0 0.0FPGA CPU 0.8 lc fpga1 0.08 0.0 0.0ROMMONA swv2.03 kensho lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 kensho lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------1OC768-ITU/C OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DWDM-L OPTICS FIRMWARE 110B10 lc fpga2 110.10 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-O OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------1OC768-DPSK/C-E OPTICS FIRMWARE 110B14 lc fpga2 110.14 0.0 0.0------------------------------------------------------------------------------------------20-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------12-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------1-100GBE PLIM FPGA 19.0 lc fpga3 19.00 0.0 0.0RX MAC FPGA 49.0 lc fpga4 49.00 0.0 0.0TX MAC FPGA 34.0 lc fpga5 34.00 0.0 0.0------------------------------------------------------------------------------------------14-10GBE PLIM FPGA 42.0 lc fpga3 42.00 0.0 0.0------------------------------------------------------------------------------------------DRP_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------MSC_B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------FP40 FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------CRS1-SIP-800 JACKET FPGA swv6.0 lc fpga1 6.00 5.0 0.0FPGA swv6.0 hwv80 lc fpga1 6.00 5.0 0.80------------------------------------------------------------------------------------------8-10GBE FPGA swvA.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------OC48-POS-16-ED FPGA PLIM_OC48 9.0 lc fpga1 9.00 0.0 0.0------------------------------------------------------------------------------------------4-10GBE FPGA sw_4p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------8-10GBE FPGA sw_8p_v15.0 lc fpga1 15.00 0.0 0.0------------------------------------------------------------------------------------------4-10GE SQUIRREL FPGA 10.0 lc fpga1 10.00 0.0 0.0------------------------------------------------------------------------------------------42-1GE FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------20-1GE-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------2-10GE-WL-FLEX FPGA swv6.0 lc fpga1 6.00 0.0 0.0FPGA swv6.0 hwv0.80 lc fpga1 6.00 0.0 0.80------------------------------------------------------------------------------------------CRS-16-LCC-F-CT-B FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------CRS-FCC-LED FPGA 6.04 spb lc fpga1 6.04 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 spb lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 spb lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Route Processor ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------SC ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Shelf Controller GE ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------RP ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Shelf Controller GE2 ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------DRP ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------S1S2S3 ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------S1S3 ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------S2 ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Fabric HS123 ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------Fabric QQS123 ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------LED ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------40G-MSC ROMMONA swv2.03 asmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 dsmp lc rommonA 2.01 0.0 0.0ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 asmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 dsmp lc rommon 2.03 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------CRS-16-ALARM ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------CRS-16-ALARM-C ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------CRS-16-LCC-FAN-CT ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------FC Fan Controller ROMMONA swv2.03 sp lc rommonA 2.01 0.0 0.0ROMMONB swv2.03 sp lc rommon 2.03 0.0 0.0------------------------------------------------------------------------------------------SPA-4XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-2XT3/E3 SPA E3 Subrate FPGA spa fpga2 1.04 0.0 0.0SPA T3 Subrate FPGA spa fpga3 1.04 0.0 0.0SPA I/O FPGA spa fpga1 1.00 0.0 0.0SPA ROMMON spa rommon 2.12 0.0 0.0------------------------------------------------------------------------------------------SPA-OC192POS SPA FPGA swv1.3 spa fpga1 1.03 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC3-POS SPA FPGA swv3.4 spa fpga1 3.04 0.0 0.0------------------------------------------------------------------------------------------SPA-OC192POS-XFP SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE SPA FPGA swv1.8 spa fpga1 1.08 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC48POS/RPR SPA FPGA swv1.2 spa fpga1 1.02 0.0 0.0------------------------------------------------------------------------------------------SPA-8XOC3-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-2XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-4XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-10X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-8X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-5X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.0 0.0------------------------------------------------------------------------------------------SPA-1X10GE-L-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-4XOC3-POS-V2 SPA FPGA swv1.0 spa fpga1 1.00 0.0 0.5------------------------------------------------------------------------------------------SPA-1X10GE-WL-V2 SPA FPGA swv1.11 spa fpga1 1.11 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-2XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-3XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------SPA-1XOC12-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.0 0.0------------------------------------------------------------------------------------------Cisco CRS-3 show fpd package Output
07:54:35 PDT Fri Apr 08 2011===================================== ==========================================Existing Field Programmable Devices==========================================HW Current SW Upg/Location Card Type Version Type Subtype Inst Version Dng?============ ======================== ======= ==== ======= ==== =========== ====0/0/CPU0 CRS1-SIP-800 0.104 lc fpga1 0 6.00 Nolc rommonA 0 2.03 Nolc rommon 0 2.03 No------------------------------------------------------------------------------------------0/0/1 SPA-4XOC48POS/RPR 1.0 spa fpga1 1 1.00 No------------------------------------------------------------------------------------------0/0/2 SPA-4XOC48POS/RPR 1.0 spa fpga1 2 1.00 No------------------------------------------------------------------------------------------0/0/4 SPA-8X1GE 2.2 spa fpga1 4 1.08 No------------------------------------------------------------------------------------------0/1/CPU0 CRS1-SIP-800 0.104 lc fpga1 0 6.00 Nolc rommonA 0 2.03 Nolc rommon 0 2.03 No------------------------------------------------------------------------------------------0/1/0 SPA-1X10GE-WL-V2 1.0 spa fpga1 0 1.11 No------------------------------------------------------------------------------------------0/1/3 SPA-1X10GE-L-V2 1.2 spa fpga1 3 1.11 No------------------------------------------------------------------------------------------0/1/4 SPA-4XOC3-POS 1.0 spa fpga1 4 3.04 No------------------------------------------------------------------------------------------0/1/5 SPA-1X10GE-WL-V2 1.0 spa fpga1 5 1.11 No------------------------------------------------------------------------------------------0/RP0/CPU0 RP 0.1 lc rommonA 0 2.03 Nolc rommon 0 2.03 No------------------------------------------------------------------------------------------Minimum Firmware Requirement
•
http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/SoftwareFirmwareCompatibilityMatrix.pdf
•
http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html
Here's the link to the Cisco Systems IOS XR Firmware Upgrade Guide For CRS-1 and XR12000:
http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/IOSXRFirmwareUpgradeGuide.pdf
•
Determining Your Software Version
To determine the version of Cisco IOS XR software running on your router, log into the router and enter the show version command:
Cisco CRS-1 show version Output
Step 1
Step 2
Wed Apr 27 16:58:34.178 UTCCisco IOS XR Software, Version 4.1.0[Default]Copyright (c) 2011 by Cisco Systems, Inc.ROM: System Bootstrap, Version 2.03(20110128:194139) [CRS ROMMON],L2VPN-UPE1-CE1 uptime is 1 day, 18 hours, 51 minutesSystem image file is "bootflash:disk0/hfr-os-mbi-4.1.0/mbihfr-rp.vm"cisco CRS-4/S (7457) processor with 4194304K bytes of memory.7457 processor at 1197Mhz, Revision 1.2Cisco CRS Series 4 Slots Line Card Chassis2 Management Ethernet28 GigabitEthernet1 TenGigE4 SONET/SDH4 Packet over SONET/SDH1019k bytes of non-volatile configuration memory.22892M bytes of hard disk.3525052k bytes of disk0: (Sector size 512 bytes).Boot device on node 0/1/SP is bootflash:Package active on node 0/1/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/1/CPU0 is mem:Package active on node 0/1/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 18:27:18 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/2/SP is bootflash:Package active on node 0/2/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/2/CPU0 is mem:Package active on node 0/2/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 18:27:18 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieConfiguration register on node 0/RP0/CPU0 is 0x2Boot device on node 0/RP0/CPU0 is disk0:Package active on node 0/RP0/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-doc-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.0Built on Sun Apr 24 18:49:14 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-security, V 4.1.0[00], Cisco Systems, at disk0:iosxr-security-4.1.0Built on Sun Apr 24 18:48:00 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 18:27:18 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mgbl, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.0Built on Sun Apr 24 18:27:03 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-k9sec-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.0Built on Sun Apr 24 18:48:00 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mgbl-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.0Built on Sun Apr 24 18:27:03 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieConfiguration register on node 0/RP1/CPU0 is 0x2Boot device on node 0/RP1/CPU0 is disk0:Package active on node 0/RP1/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-doc-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.0Built on Sun Apr 24 18:49:14 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-security, V 4.1.0[00], Cisco Systems, at disk0:iosxr-security-4.1.0Built on Sun Apr 24 18:48:00 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 18:27:18 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mgbl, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.0Built on Sun Apr 24 18:27:03 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 18:27:57 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-k9sec-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.0Built on Sun Apr 24 18:48:00 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mgbl-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.0Built on Sun Apr 24 18:27:03 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 18:27:33 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/SM0/SP is bootflash:Package active on node 0/SM0/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/SM1/SP is bootflash:Package active on node 0/SM1/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/SM2/SP is bootflash:Package active on node 0/SM2/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/SM3/SP is bootflash:Package active on node 0/SM3/SP:iosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 18:48:55 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 18:48:12 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 18:27:54 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 18:29:50 UTC 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pie
Cisco CRS-3 show version Output
Step 1
Step 2
Wed Apr 27 10:49:30.919 PDTCisco IOS XR Software, Version 4.1.0[Default]Copyright (c) 2011 by Cisco Systems, Inc.ROM: System Bootstrap, Version 2.03(20110128:194139) [CRS ROMMON],CSC-CE1 uptime is 31 minutesSystem image file is "bootflash:disk0/hfr-os-mbi-4.1.0/mbihfr-rp.vm"cisco CRS-4/S (7457) processor with 4194304K bytes of memory.7457 processor at 1197Mhz, Revision 1.1Cisco CRS Series 4 Slots Line Card Chassis1 Management Ethernet2 WANPHY controller(s)3 TenGigE12 SONET/SDH12 Packet over SONET/SDH8 GigabitEthernet1019k bytes of non-volatile configuration memory.38079M bytes of hard disk.3607548k bytes of disk0: (Sector size 512 bytes).3607548k bytes of disk1: (Sector size 512 bytes).Boot device on node 0/0/CPU0 is mem:Package active on node 0/0/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fit, V 4.1.0[00], Cisco Systems, at disk0:hfr-fit-4.1.0Built on Sun Apr 24 11:49:11 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 11:27:18 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 11:48:55 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 11:48:12 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 11:29:50 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieBoot device on node 0/1/CPU0 is mem:Package active on node 0/1/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fit, V 4.1.0[00], Cisco Systems, at disk0:hfr-fit-4.1.0Built on Sun Apr 24 11:49:11 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 11:27:18 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 11:48:55 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 11:48:12 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 11:29:50 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieConfiguration register on node 0/RP0/CPU0 is 0x2Boot device on node 0/RP0/CPU0 is disk0:Package active on node 0/RP0/CPU0:iosxr-ce, V 4.1.0[00], Cisco Systems, at disk0:iosxr-ce-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fit, V 4.1.0[00], Cisco Systems, at disk0:hfr-fit-4.1.0Built on Sun Apr 24 11:49:11 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-doc-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-doc-supp-4.1.0Built on Sun Apr 24 11:49:14 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-ce, V 4.1.0[00], Cisco Systems, at disk0:hfr-ce-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-security, V 4.1.0[00], Cisco Systems, at disk0:iosxr-security-4.1.0Built on Sun Apr 24 11:48:00 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mpls, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mpls-4.1.0Built on Sun Apr 24 11:27:18 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mgbl, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mgbl-4.1.0Built on Sun Apr 24 11:27:03 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-mcast, V 4.1.0[00], Cisco Systems, at disk0:iosxr-mcast-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-routing, V 4.1.0[00], Cisco Systems, at disk0:iosxr-routing-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-infra, V 4.1.0[00], Cisco Systems, at disk0:iosxr-infra-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fwding, V 4.1.0[00], Cisco Systems, at disk0:hfr-fwding-4.1.0Built on Sun Apr 24 11:27:57 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-fwding, V 4.1.0[00], Cisco Systems, at disk0:iosxr-fwding-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pieiosxr-diags, V 4.1.0[00], Cisco Systems, at disk0:iosxr-diags-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-fpd, V 4.1.0[00], Cisco Systems, at disk0:hfr-fpd-4.1.0Built on Sun Apr 24 11:48:55 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-diags-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-diags-supp-4.1.0Built on Sun Apr 24 11:48:12 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-k9sec-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-k9sec-supp-4.1.0Built on Sun Apr 24 11:48:00 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mgbl-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mgbl-supp-4.1.0Built on Sun Apr 24 11:27:03 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-mcast-supp, V 4.1.0[00], Cisco Systems, at disk0:hfr-mcast-supp-4.1.0Built on Sun Apr 24 11:27:33 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-base, V 4.1.0[00], Cisco Systems, at disk0:hfr-base-4.1.0Built on Sun Apr 24 11:27:54 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for piehfr-os-mbi, V 4.1.0[00], Cisco Systems, at disk0:hfr-os-mbi-4.1.0Built on Sun Apr 24 11:29:50 PDT 2011By sjc-lds-511 in /auto/srcarchive5/production/4.1.0/hfr/workspace for pie
New Cisco CRS Router Software Features
The following new software features were introduced in Cisco IOS XR Software Release 4.1 on the Cisco CRS platform:
•
For more information, refer to the Cisco IOS XR System Security Configuration Guide for the Cisco CRS Router.
•
For licensing information, see the "CRS FP-140 Licenses" section of these notes.
•
For more information, refer to the Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR Modular Quality of Service Configuration Guide for the Cisco CRS Router and the Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR IP Addresses and Services Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR Modular Quality of Service Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router.
•
For more information, refer to the Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router.
•
–
–
–
For more information, refer to the Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router and the Cisco IOS XR MPLS Command Reference for the Cisco CRS Router.
•
Note
Online Diagnostics Enhancements
Cisco IOS XR Software Release 4.1 includes the following enhancements to online diagnostics:
•
FabricUcastMcast Test
The FabricUcastMcast diagnostic test was introduced in Cisco IOS XR Software Release 4.1. This test combines the unicast test, FabricDiagnosisTest, and the multicast test, FabricMcastTest and replaces them as the test that is enabled in the health monitoring by default. The FabricDiagnosisTest and FabricMcastTest are no longer turned on by default as part of the health monitoring, however they are still available.
The default interval for invoking FabricUcastMcastTest as part of the health monitoring is set to 1 min. In previous releases, the interval of FabricDiagnosisTest and FabricMcastTest was set to 2 mins.
By default, the FabricUcastMcastTest is enabled on the DSC standby RP. If the standby RP is not available the test runs from the active RP.
FabricUcastMcastTest includes the automatic plane disabling (APD) feature, in which a request is made to take the faulty fabric plane out-of-service. The APD rules for making the plane out-of-service (OOS) request by the online-diags require either one of the following to be true for the tested plane:
•
•
The request to take a faulty fabric plane out-of-service is fulfilled when the fabric capacity threshold is met. The default threshold setting is 7. However, you can configure the fabric capacity threshold by using the following command:
RP/0/RP0/CPU0:router(admin-config)#controllers fabric capacity threshold <2-8>The threshold parameter is in the range 2 through 8.
Use the show diagnostic result command in admin exec mode to view the results of the FabricUcastMcast Test. See the following example:
RP/1/RP0/CPU0:router(admin)#show diagnostic result location 0/rp1/cpu0 test FabricUcastMcastTest detailFri Mar 4 11:21:01.153 UTCCurrent bootup diagnostic level for RP 0/RP1/CPU0: bypassTest results: (. = Pass, F = Fail, U = Untested)___________________________________________________________________________13 ) FabricUcastMcastTest ------------> .Error code ------------------> 0 (DIAG_SUCCESS)Total run count -------------> 17Last test execution time ----> Fri Mar 4 11:20:54 2011First test failure time -----> Fri Mar 4 11:19:47 2011Last test failure time ------> Fri Mar 4 11:19:47 2011Last test pass time ---------> Fri Mar 4 11:20:54 2011Total failure count ---------> 1Consecutive failure count ---> 0Unicast Resultsdest: (all nodes) session_id: 48ret_code: 0 (No error)rx_ret_code: 0 (No error)tx_ret_code: 0 (No error)min_rtt_ms: 2 max_rtt_ms: 63ping_mode_mask: 0x00000099 fplane_bitmap: 0x000000ffinter_packet_delay: 0 max_timeout_ms: 1500late_timeout_ms: 1500 priority: 0flags: 0x00000000 pkt_cnt: 10pkt_size: 1000 num_nodes: 15tx_start_ts: 11:20:54.488 UTC Fri Mar 04 2011modes: 0 - LP/fabricq0, 3 - LP/fabricq1, 4 - HP/fabricq0, 7 - HP/fabricq1node[mode] req'ed rx_good tx_good tx_unrea tx_err rx_unexp rx_corr============== ======== ======== ======== ======== ======== ======== ========0/0/CPU0[0] 10 10 10 0 0 0 00/0/CPU0[3] 10 10 10 0 0 0 00/0/CPU0[4] 10 10 10 0 0 0 00/0/CPU0[7] 10 10 10 0 0 0 00/4/CPU0[0] 10 10 10 0 0 0 00/4/CPU0[3] 10 10 10 0 0 0 00/4/CPU0[4] 10 10 10 0 0 0 00/4/CPU0[7] 10 10 10 0 0 0 00/5/CPU0[0] 10 10 10 0 0 0 00/5/CPU0[3] 10 10 10 0 0 0 00/5/CPU0[4] 10 10 10 0 0 0 00/5/CPU0[7] 10 10 10 0 0 0 00/6/CPU0[0] 10 10 10 0 0 0 00/6/CPU0[3] 10 10 10 0 0 0 00/6/CPU0[4] 10 10 10 0 0 0 00/6/CPU0[7] 10 10 10 0 0 0 00/8/CPU0[0] 10 10 10 0 0 0 00/8/CPU0[4] 10 10 10 0 0 0 00/RP0/CPU0[0] 10 10 10 0 0 0 00/RP0/CPU0[4] 10 10 10 0 0 0 00/RP1/CPU0[0] 10 10 10 0 0 0 00/RP1/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[0] 10 10 10 0 0 0 01/3/CPU0[3] 10 10 10 0 0 0 01/3/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[7] 10 10 10 0 0 0 01/4/CPU0[0] 10 10 10 0 0 0 01/4/CPU0[3] 10 10 10 0 0 0 01/4/CPU0[4] 10 10 10 0 0 0 01/4/CPU0[7] 10 10 10 0 0 0 01/7/CPU0[0] 10 10 10 0 0 0 01/7/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[0] 10 10 10 0 0 0 01/9/CPU0[3] 10 10 10 0 0 0 01/9/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[7] 10 10 10 0 0 0 01/14/CPU0[0] 10 10 10 0 0 0 01/14/CPU0[3] 10 10 10 0 0 0 01/14/CPU0[4] 10 10 10 0 0 0 01/14/CPU0[7] 10 10 10 0 0 0 01/15/CPU0[0] 10 10 10 0 0 0 01/15/CPU0[4] 10 10 10 0 0 0 01/RP0/CPU0[0] 10 10 10 0 0 0 01/RP0/CPU0[4] 10 10 10 0 0 0 01/RP1/CPU0[0] 10 10 10 0 0 0 01/RP1/CPU0[4] 10 10 10 0 0 0 0============== ======== ======== ======== ======== ======== ======== ========Global 460 460 460 0 0 0 0Unicast Results (Last Failure)dest: (all nodes) session_id: 30ret_code: 606182912 ('FAB_SVR' detected the 'informational' condition 'Timed outwaiting for all ping replies.')rx_ret_code: 0 (No error)tx_ret_code: 0 (No error)min_rtt_ms: 2 max_rtt_ms: 61ping_mode_mask: 0x00000099 fplane_bitmap: 0x000000ffinter_packet_delay: 0 max_timeout_ms: 1500late_timeout_ms: 1500 priority: 0flags: 0x00000000 pkt_cnt: 10pkt_size: 1000 num_nodes: 15tx_start_ts: 11:19:47.167 UTC Fri Mar 04 2011modes: 0 - LP/fabricq0, 3 - LP/fabricq1, 4 - HP/fabricq0, 7 - HP/fabricq1node[mode] req'ed rx_good tx_good tx_unrea tx_err rx_unexp rx_corr============== ======== ======== ======== ======== ======== ======== ========0/0/CPU0[0] 10 0 10 0 0 0 00/0/CPU0[3] 10 0 10 0 0 0 00/0/CPU0[4] 10 0 10 0 0 0 00/0/CPU0[7] 10 0 10 0 0 0 00/4/CPU0[0] 10 10 10 0 0 0 00/4/CPU0[3] 10 10 10 0 0 0 00/4/CPU0[4] 10 10 10 0 0 0 00/4/CPU0[7] 10 10 10 0 0 0 00/5/CPU0[0] 10 10 10 0 0 0 00/5/CPU0[3] 10 10 10 0 0 0 00/5/CPU0[4] 10 10 10 0 0 0 00/5/CPU0[7] 10 10 10 0 0 0 00/6/CPU0[0] 10 10 10 0 0 0 00/6/CPU0[3] 10 10 10 0 0 0 00/6/CPU0[4] 10 10 10 0 0 0 00/6/CPU0[7] 10 10 10 0 0 0 00/8/CPU0[0] 10 10 10 0 0 0 00/8/CPU0[4] 10 10 10 0 0 0 00/RP0/CPU0[0] 10 10 10 0 0 0 00/RP0/CPU0[4] 10 10 10 0 0 0 00/RP1/CPU0[0] 10 10 10 0 0 0 00/RP1/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[0] 10 10 10 0 0 0 01/3/CPU0[3] 10 10 10 0 0 0 01/3/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[7] 10 10 10 0 0 0 01/4/CPU0[0] 10 10 10 0 0 0 01/4/CPU0[3] 10 10 10 0 0 0 01/4/CPU0[4] 10 10 10 0 0 0 01/4/CPU0[7] 10 10 10 0 0 0 01/7/CPU0[0] 10 10 10 0 0 0 01/7/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[0] 10 10 10 0 0 0 01/9/CPU0[3] 10 10 10 0 0 0 01/9/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[7] 10 10 10 0 0 0 01/14/CPU0[0] 10 10 10 0 0 0 01/14/CPU0[3] 10 10 10 0 0 0 01/14/CPU0[4] 10 10 10 0 0 0 01/14/CPU0[7] 10 10 10 0 0 0 01/15/CPU0[0] 10 10 10 0 0 0 01/15/CPU0[4] 10 10 10 0 0 0 01/RP0/CPU0[0] 10 10 10 0 0 0 01/RP0/CPU0[4] 10 10 10 0 0 0 01/RP1/CPU0[0] 10 10 10 0 0 0 01/RP1/CPU0[4] 10 10 10 0 0 0 0============== ======== ======== ======== ======== ======== ======== ========Global 460 420 460 0 0 0 0Multicast Resultsdest: FGID 1023 session_id: 49ret_code: 0 (No error)rx_ret_code: 0 (No error)tx_ret_code: 0 (No error)min_rtt_ms: 13 max_rtt_ms: 58ping_mode_mask: 0x00000011 fplane_bitmap: 0x000000ffinter_packet_delay: 0 max_timeout_ms: 1500late_timeout_ms: 1500 priority: 0flags: 0x00000000 pkt_cnt: 10pkt_size: 1000 num_nodes: 15tx_start_ts: 11:20:54.492 UTC Fri Mar 04 2011modes: 0 - LP/fabricq0, 4 - HP/fabricq0node[mode] req'ed rx_good tx_good tx_unrea tx_err rx_unexp rx_corr============== ======== ======== ======== ======== ======== ======== ========0/0/CPU0[0] 10 10 10 0 0 0 00/0/CPU0[4] 10 10 10 0 0 0 00/4/CPU0[0] 10 10 10 0 0 0 00/4/CPU0[4] 10 10 10 0 0 0 00/5/CPU0[0] 10 10 10 0 0 0 00/5/CPU0[4] 10 10 10 0 0 0 00/6/CPU0[0] 10 10 10 0 0 0 00/6/CPU0[4] 10 10 10 0 0 0 00/8/CPU0[0] 10 10 10 0 0 0 00/8/CPU0[4] 10 10 10 0 0 0 00/RP0/CPU0[0] 10 10 10 0 0 0 00/RP0/CPU0[4] 10 10 10 0 0 0 00/RP1/CPU0[0] 10 10 10 0 0 0 00/RP1/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[0] 10 10 10 0 0 0 01/3/CPU0[4] 10 10 10 0 0 0 01/4/CPU0[0] 10 10 10 0 0 0 01/4/CPU0[4] 10 10 10 0 0 0 01/7/CPU0[0] 10 10 10 0 0 0 01/7/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[0] 10 10 10 0 0 0 01/9/CPU0[4] 10 10 10 0 0 0 01/14/CPU0[0] 10 10 10 0 0 0 01/14/CPU0[4] 10 10 10 0 0 0 01/15/CPU0[0] 10 10 10 0 0 0 01/15/CPU0[4] 10 10 10 0 0 0 01/RP0/CPU0[0] 10 10 10 0 0 0 01/RP0/CPU0[4] 10 10 10 0 0 0 01/RP1/CPU0[0] 10 10 10 0 0 0 01/RP1/CPU0[4] 10 10 10 0 0 0 0============== ======== ======== ======== ======== ======== ======== ========Global 300 300 300 0 0 0 0Multicast Results (Last Failure)dest: FGID 1023 session_id: 31ret_code: 0 (No error)rx_ret_code: 0 (No error)tx_ret_code: 0 (No error)min_rtt_ms: 14 max_rtt_ms: 58ping_mode_mask: 0x00000011 fplane_bitmap: 0x000000ffinter_packet_delay: 0 max_timeout_ms: 1500late_timeout_ms: 1500 priority: 0flags: 0x00000000 pkt_cnt: 10pkt_size: 1000 num_nodes: 15tx_start_ts: 11:19:47.171 UTC Fri Mar 04 2011modes: 0 - LP/fabricq0, 4 - HP/fabricq0node[mode] req'ed rx_good tx_good tx_unrea tx_err rx_unexp rx_corr============== ======== ======== ======== ======== ======== ======== ========0/0/CPU0[0] 10 10 10 0 0 0 00/0/CPU0[4] 10 10 10 0 0 0 00/4/CPU0[0] 10 10 10 0 0 0 00/4/CPU0[4] 10 10 10 0 0 0 00/5/CPU0[0] 10 10 10 0 0 0 00/5/CPU0[4] 10 10 10 0 0 0 00/6/CPU0[0] 10 10 10 0 0 0 00/6/CPU0[4] 10 10 10 0 0 0 00/8/CPU0[0] 10 10 10 0 0 0 00/8/CPU0[4] 10 10 10 0 0 0 00/RP0/CPU0[0] 10 10 10 0 0 0 00/RP0/CPU0[4] 10 10 10 0 0 0 00/RP1/CPU0[0] 10 10 10 0 0 0 00/RP1/CPU0[4] 10 10 10 0 0 0 01/3/CPU0[0] 10 10 10 0 0 0 01/3/CPU0[4] 10 10 10 0 0 0 01/4/CPU0[0] 10 10 10 0 0 0 01/4/CPU0[4] 10 10 10 0 0 0 01/7/CPU0[0] 10 10 10 0 0 0 01/7/CPU0[4] 10 10 10 0 0 0 01/9/CPU0[0] 10 10 10 0 0 0 01/9/CPU0[4] 10 10 10 0 0 0 01/14/CPU0[0] 10 10 10 0 0 0 01/14/CPU0[4] 10 10 10 0 0 0 01/15/CPU0[0] 10 10 10 0 0 0 01/15/CPU0[4] 10 10 10 0 0 0 01/RP0/CPU0[0] 10 10 10 0 0 0 01/RP0/CPU0[4] 10 10 10 0 0 0 01/RP1/CPU0[0] 10 10 10 0 0 0 01/RP1/CPU0[4] 10 10 10 0 0 0 0============== ======== ======== ======== ======== ======== ======== ========Global 300 300 300 0 0 0 0The show diagnostic content location command has been modified to support the new FabricUcastMcast Test. See the following example:
RP/0/RP0/CPU0:router(admin)#show diagnostic content location 0/0/CPU0Thu Mar 3 13:45:26.115 PSTDRP 0/0/CPU0:Diagnostics test suite attributes:M/C/* - Minimal bootup level test / Complete bootup level test / NAB/* - Basic ondemand test / NAP/V/* - Per port test / Per device test / NAD/N/* - Disruptive test / Non-disruptive test / NAS/* - Only applicable to standby unit / NAX/* - Not a health monitoring test / NAF/* - Fixed monitoring interval test / NAE/* - Always enabled monitoring test / NAA/I - Monitoring is active / Monitoring is inactiveTest Interval Thre-ID Test Name Attributes (day hh:mm:ss.ms shold)==== ================================== ============ ================= =====1) ControlEthernetPingTest ---------> *B*N*X**I 001 00:00:00.000 12) SelfPingOverFabric --------------> *B*N*X**I 001 00:00:00.000 13) FabricPingTest ------------------> *B*N*X**I 001 00:00:00.000 14) ControlEthernetInactiveLinkTest -> *B*NS***I 001 00:00:00.000 15) RommonRevision ------------------> *B*N*X**I 001 00:00:00.000 16) FabricDiagnosisTest ------------> *B*NS***I 000 00:02:00.000 17) FilesystemBasicDisk0 ------------> *B*N****I 003 00:00:00.000 18) FilesystemBasicDisk1 ------------> *B*N****I 003 00:00:00.000 19) FilesystemBasicHarddisk ---------> *B*N****I 003 00:00:00.000 110) ScratchRegisterTest -------------> CBVN****I 001 00:00:00.000 111) FabricMcastTest -----------------> *B*NS***A 000 00:02:00.000 112) ControlEthernetIntraSwitchTest --> ***N****I 000 00:00:02.000 313) FabricUcastMcastTest ------------> *B*N****A 000 00:01:00.000 1The FabricUcastMcastTest diagnostic test is used to periodically verify the fabric connectivity to all fabric destinations (RP, LC, DRP nodes) in a single or multi-chassis system.
Automatic reload and shutdown as a result of a single -node failure is disabled by default. To enable this feature, set the parameters of the FabricUcastMcast test by setting one or more of the optional parameters of the diagnostic test-parameters FabricUcastMcastTest command.
diagnostic test-parameters FabricUcastMcastTest [single-DRP-node-failure | single-LC-node-failure | single-RP-node-failure] <failure-type| reload threshold | shutdown threshold>
Syntax Description
Command Default
None.
Command Modes
Admin-config FabricUcastMcastTest
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator.
Task ID
Examples
The following example shows how to set a node for automatic reload and shutdown when the FabricUcastMcastTest results return single node failure as a result of line card failures for only multicast traffic:
RP/0/RP0/CPU0:router# adminRP/0/RP0/CPU0:router(admin)# configurationRP/0/RP0/CPU0:router(admin-config)# diagnostic test-parametersRP/0/RP0/CPU0:router(admin-config-diag-test-params)#FabricUcastMcastTestRP/0/RP0/CPU0:router(admin-config-FabricUcastMcastTest)#single-LC-node-failureRP/0/RP0/CPU0:router(admin-config-FabricUcastMcastTest-LC)failure-type multicast-onlyRP/0/RP0/CPU0:router(admin-config-FabricUcastMcastTest-LC)reload threshold 5RP/0/RP0/CPU0:router(admin-config-FabricUcastMcastTest-LC)shutdown threshold 6RP/0/RP0/CPU0:router(admin-config-FabricUcastMcastTest-LC)commitWhen a single-node failure is detected, the following syslog messages are logged:
RP/0/RP1/CPU0:Jan 27 07:58:58.364 : online_diag_rp[276]: %DIAG-XR_DIAG-3-ERROR : (U) Fabric Ping Failure, 1 of 3 nodes failed(L): 0/3/CPU0RP/0/RP1/CPU0:Jan 27 07:58:58.802 : online_diag_rp[276]: %DIAG-XR_DIAG-3-ERROR : (U) FIM: single-node failure detected - 0/3/CPU0consecutive ucast/mcast failures: 15/0When the reload threshold is reached, the following syslog message is logged prior to the reload:
RP/0/RP1/CPU0:Jan 27 07:58:58.803 : online_diag_rp[276]: %DIAG-XR_DIAG-6-INFO :reload threshold 15 crossed, reloading 0/3/CPU0When the shutdown threshold is reached, the following syslog messages are logged:
RP/0/RP1/CPU0:Jan 27 08:11:02.104 : online_diag_rp[276]: %DIAG-XR_DIAG-6-INFO : shutdown threshold 10 crossed, shutting down 0/3/CPU0RP/0/RP1/CPU0:Jan 27 08:11:02.137 : online_diag_rp[276]: %PLATFORM-SHELFMGR-6-BRINGDOWN_REQUEST_LIB : Requesting node 0/3/CPU0 to be shutdown. reason: [diag fabric ping failure]RP/0/RP0/CPU0:Jan 27 08:11:02.136 : shelfmgr[306]: %PLATFORM-SHELFMGR-6-BRINGDOWN_REQUEST : process online_diag_rp running on node0_RP1_CPU0 requested node 0/3/CPU0 to be shutdown. reason: [diag fabric ping failure]FabSRCC Test on Cisco CRS-3 Line Cards
The FabSRCC diagnostic test was introduced in Cisco IOS XR Software Release 4.1 on the Cisco CRS-3 line cards. This test supports CRS-3 nodes that send and receive statically routed control cells (SRCC).
Use the following command to start the SRCC Test
diagnostic start location <location> test FabSRCCTest
The <location> parameter is one of the nodes in the Run state that supports SRCC functionality.
By default the FabSRCC test is run on demand, but you can configure it to run as a health monitor test by using the following command:.
diagnostic monitor <location> test FabSRCCTest
To stop the SRCC test to run as a health monitor test, use the following command:
no diagnostic monitor <location> test FabSRCCTest
If you run the SRCC test as a health monitor, you can configure the interval by using the following command:
diagnostic monitor interval <location> test FabSRCCTest number-of-days hour:minutes:seconds. milliseconds
The default interval is 2 minutes.
The following show command has been modified to support the new FabricUcastMcast test:
•
RP/0/RP0/CPU0:router(admin)#show diagnostic content location 0/0/CPU0RP/0/RP0/CPU0:router(admin)#show diagnostic content location 0/4/CPU0Tue Jun 1 20:59:42.924 UTCMSC-140G 0/4/CPU0:Diagnostics test suite attributes:M/C/* - Minimal bootup level test / Complete bootup level test / NAB/* - Basic ondemand test / NAP/V/* - Per port test / Per device test / NAD/N/* - Disruptive test / Non-disruptive test / NAS/* - Only applicable to standby unit / NAX/* - Not a health monitoring test / NAF/* - Fixed monitoring interval test / NAE/* - Always enabled monitoring test / NAA/I - Monitoring is active / Monitoring is inactiveTest Interval Thre-ID Test Name Attributes (day hh:mm:ss.ms shold)==== ================================== ============ ================= =====1) ControlEthernetPingTest ---------> *B*N*X**I 001 00:00:00.000 12) SelfPingOverFabric --------------> *B*N*X**I 001 00:00:00.000 13) RommonRevision ------------------> *B*N*X**I 001 00:00:00.000 14) ScratchRegisterTest -------------> CBVN****I 001 00:00:00.000 15) PSEMemoryBISTTest ---------------> **VD*X**I 001 00:00:00.000 16) FabricqMemoryBISTTest -----------> **VD*X**I 001 00:00:00.000 17) EgressqMemoryBISTTest -----------> **VD*X**I 001 00:00:00.000 18) IngressqMemoryBISTTest ----------> **VD*X**I 001 00:00:00.000 19) FabSRCCTest --------------------> *B*N*X**I 000 00:02:00.000 1To display detailed diagnostic test results for the FabSRCC Test, use the following command:
show diagnostic result <location> test FabSRCCTest detail
RP/0/RP0/CPU0:router(admin)#show diagnostic result location 0/4/cpu0 test FabSRCCTest detailTue Jun 1 21:07:38.974 UTCCurrent bootup diagnostic level for MSC-140G 0/4/CPU0: bypassTest results: (. = Pass, F = Fail, U = Untested)___________________________________________________________________________9 ) FabSRCCTest -------------------> .Error code ------------------> 0 (DIAG_SUCCESS)Total run count -------------> 1Last test execution time ----> Tue Jun 1 21:05:00 2010First test failure time -----> n/aLast test failure time ------> n/aLast test pass time ---------> Tue Jun 1 21:05:00 2010Total failure count ---------> 0Consecutive failure count ---> 0___________________________________________________________________________New Hardware Features for the Cisco CRS Router
The following new hardware features were introduced in Cisco IOS XR Software Release 4.1 on the Cisco CRS Router:
•
•
•
•
•
–
–
–
Cisco CRS-3 SW Features
Note
The following features are now supported on the Cisco CRS-3 Router in Cisco IOS XR Software Release 4.1:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note
Important Notes
•
•
Configuration prior to Cisco IOS XR Software Release 3.6.0:
Policy-map wred_exampleClass class-defaultrandom-detect exp 0 384 packets 484 packetsrandom-detect exp 1 384 packets 484 packetsrandom-detect exp 2 384 packets 484 packetsrandom-detect exp 3 484 packets 584 packetsrandom-detect exp 4 484 packets 584 packetsrandom-detect discard-class 0 384 packets 484 packetsrandom-detect discard-class 1 384 packets 484 packetsrandom-detect discard-class 2 484 packets 584 packetsbandwidth remaining percent 20Cisco IOS XR Software Release 3.6.0 and later releases:
policy-map wred_exampleclass class-defaultrandom-detect exp 0,1,2 384 packets 484 packetsrandom-detect exp 3,4 484 packets 584 packetsrandom-detect discard-class 0,1 384 packets 484 packetsrandom-detect discard-class 2 484 packets 584 packetsbandwidth remaining percent 20!end-policy-map!endIn Cisco IOS XR Software Release 3.6.0 and later releases, the implicitly assigned QoS class class-default must have at least 1 percent bandwidth made available to it. This can be done either by assigning at least 1 percent explicitly (bandwidth remaining percent 1) or by ensuring that the total bandwidth assigned to all other classes in the policy is a maximum of 99 percent, leaving 1 percent available for the class-default. A QoS policy that does not have any bandwidth for class-default is rejected when upgrading to Cisco IOS XR Software Release 3.6.0 or later releases.
•
•
•
•
•
–
–
–
–
•
–
RP/0/RP0/CPU0:router(config)#bfdRP/0/RP0/CPU0:router(config-bfd)#ipv6 checksum disableRP/0/RP0/CPU0:router(config-bfd)#end–
RP/0/RP0/CPU0:router(config)#bfdRP/0/RP0/CPU0:router(config-bfd)#no ipv6 checksum disableRP/0/RP0/CPU0:router(config-bfd)#end•
•
•
LDP session hold time <= (Hello hold time - Hello interval) * 3
This means that for default values of 15/5 seconds respectively for the link Hello hold time and the Hello interval, the LDP session hold time should be set to 30 seconds or less.
For more information, refer to the "Implementing MPLS Label Distribution Protocol on Cisco IOS XR Software" section of the Cisco IOS XR MPLS Configuration Guide, Release 4.0.
•
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
•
–
–
–
–
–
–
–
–
–
For information about these commands, refer to the Commands section of the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Upgrade Guide:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
•
•
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Reference caveat, CSCtk96820. Please contact your Cisco representative for more information on dates by which this will be available.
•
New DWDM Configuration Requirement
Note
Cisco IOS XR Software Release 3.9.0 introduced new commands in addition to an important change to the default laser state for all of the DWDM physical layer interface modules (PLIMs) supported on the Cisco CRS-1 router, which impacts the required configuration to support those cards.
This change affects all models of the following hardware on the Cisco CRS-1 router:
•
•
Summary of Important DWDM Changes in Cisco IOS XR Software Release 3.9.0 and Later Releases
•
•
Configuration Examples in Cisco IOS XR Software Release 3.9.0 and Later Releases
This section provides configuration examples for turning on and off the laser on a DWDM PLIM.
Turning On the Laser: Example
Note
The following example shows how to turn on the laser and place a DWDM port in In Service (IS) state:
RP/0/RP0/CPU0:router# configureRP/0/RP0/CPU0:router(config)# controller dwdm 0/1/0/1RP/0/RP0/CPU0:router(config-dwdm)# admin-state in-serviceRP/0/RP0/CPU0:router(config-dwdm)# commitTurning Off the Laser: Example
Note
The following example shows how to turn off the laser, stop all traffic and place a DWDM port in Out of Service (OOS) state:
RP/0/RP0/CPU0:router# configureRP/0/RP0/CPU0:router(config)# controller dwdm 0/1/0/1RP/0/RP0/CPU0:router(config-dwdm)# admin-state out-of-serviceRP/0/RP0/CPU0:router(config-dwdm)# commitMinimum Flash Disk Requirements When Upgrading to Release 4.1
Cisco IOS XR Software Release 4.1 requires a 2-GB Flash Disk as a minimum. If your Cisco CRS currently uses a 1-GB Flash Disk, you must upgrade it to 2-GB before upgrading to Cisco IOS XR Software Release 4.1. The PCMCIA 1-GB Flash Disk was the default size for the Cisco CRS running Cisco IOS XR Software Release 3.6 and earlier.
In Cisco IOS XR Software Release 3.6 and later releases, disk partitioning is supported. Partitioning of a 2-GB disk is possible but not required. Partitioning of a 4-GB disk is required.
A 4-GB Flash Disk can be installed instead of the 2-GB for greater disk storage.
To upgrade from a 1-GB flash disk to a 2-GB or greater flash disk, refer to the Flash Disk Upgrade Tasks link on the following Cisco CRS Router Installation and Upgrade URL: http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
Additional upgrade instructions for the Cisco CRS router are available from http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/ReplacingPCMCIACardOnCRS-1.pdf
Caveats
Caveats describe unexpected behavior in Cisco IOS XR software releases. Severity-1 caveats are the most serious caveats; severity-2 caveats are less serious.
This section contains caveats that are generic to the Cisco IOS XR Release 4.1 software and those specific to the Cisco CRS-1 Router and the Cisco CRS-3 Router.
Cisco IOS XR Caveats
The following open caveats apply to Cisco IOS XR Software Release 4.1 and are not platform specific:
•
Basic Description:
IPv6 svd role shown as "Standard" even without any ip config on ints.
Symptom:
This occurs when there is an incorrect role calculation for IPv6 AFI. A typical occurrence would be enabling IPv6 ACL on the interface which is being used only for IPv4 forwarding. This causes SVD infra to assume that IPv6 forwarding is also intended on the interface and the SVD card role would change to Core/Customer/Standard based on the usual role calculation rules. Incorrect role calculation could cause more VRFs/prefixes to be downloaded on the card as an impact. There should not be any forwarding impact due to this caveat.
Conditions:
IPv6 Features (for example, IPv6 ACL, IPv6 MTU, and so forth) are enabled on the interface without assigning it an IPv6 address (Global or LinkLocal) via ipv6 address or ipv6 enable command.
RP/0/5/CPU0:ios#show running-config interface GigabitEthernet0/1/2/3interface GigabitEthernet0/1/2/3:ipv6 access-group test ingressipv6 bgp policy accounting input source-accounting destination-accountingipv6 mtu 1300ipv6 verify unicast source reachable-via rx:RP/0/5/CPU0:ios#show im database interface GigabitEthernet 0/0/0/0View: OWN - Owner, L3P - Local 3rd Party, G3P - Global 3rd Party,LDP - Local Data Plane, GDP - Global Data Plane, RED - RedundancyNode 0/0/CPU0 (0x821)Interface GigabitEthernet0/1/2/3, ifh 0x04000080 (down, 1514)Interface flags: 0x000000000010059f (IFCONNECTOR|IFINDEX|SUP_NAMED_SUB|BROADCAST|CONFIG|HW|VIS|DATA|CONTROL)Encapsulation: etherInterface type: IFT_GETHERNETControl parent: NoneData parent: NoneViews: GDP|LDP|L3P|OWNProtocol Caps (state, mtu)-------- -----------------None ether (down, 1514)arp arp (down, 1500)ipv4 ipv4 (down, 1500)mpls mpls (down, 1500)ipv6 ipv6_preswitch (down, 1500)ipv6 ipv6 (down, 1300)ether_sock ether_sock (down, 1500)Workaround:
None.
Recovery:
Remove the IPv6 features from the interfaces which are not being used for IPv6 forwarding. If an interface on which IPv6 features were enabled and then VRF was configured on the interface, the process restart rsi_agent on the node where the interface is hosted is also required.
For the interfaces not being used for IPv6:
RP/0/5/CPU0:ios(config)#interface GigabitEthernet 0/1/2/3RP/0/5/CPU0:ios(config-if)#no ipv6 access-group test egressRP/0/5/CPU0:ios(config-if)#no ipv6 mtu::RP/0/5/CPU0:ios#process restart rsi_agent location 0/0/CPU0•
Basic Description:
4-10GE-ITU/C and 16OC48-POS/DPT have hierarchy issue in entity mib.
Symptom:
In the ENTITY-MIBs entPhysicalTable, some of the 'portslot' entities for a PLIM only show up when polled via community-strings or usernames with the SystemOwner configuration attribute.
–
–
–
Conditions:
This issue occurs when the PLIM with entPhysicalName equals "Cisco CRS-1 4 port 10GE (C-band) DWDM PLIM" entPhysicalVendorType = "cevModuleCrs14x10GeCDwdmPlim"
Workaround:
Poll with community-strings or usernames with the SystemOwner configuration.
An alternative workaround is to restart the mibd_entity process prior to initial entPhysicalTable discovery after reload
Recovery:
Restart the mibd_entity process.
•
Basic Description:
Ping process crashed with parallel pings.
Symptom:
Ping process crashes.
Conditions:
This issue is seen when parallel pings are performed on multiple vty sessions.
Workaround:
None.
Recovery:
None.
•
Basic Description:
PE not sending route-refresh request after reconfiguring VRF.
Symptom:
PE is not sending route-refresh request to RR on reconfiguring VRF. This is visible in the show bgp neighbor CLI output where the sent counter for refresh requests does not increment on VRF RT config changes.
As a result, the updated VRF config is not in effect.
Conditions:
This issue occurs after configuring and unconfiguring RT SAFI between PE and RR, with the RR side still having the RT SAFI configured for the PE neighbor. When a new vrf is configured on PE, the PE is not sending route-refresh request to the RR.
Workaround:
The workaround is to remove the RT SAFI config under the RR for the PE nbr.
Recovery
To recover, you can manually issue router fresh via clear bgp vpnv4 unicast soft in.
•
Basic Description:
RR sending full vpn table to PE though no route-refresh from PE.
Symptom:
RR sends a full vpn table although RT Constraint is configured between RR and PE.
On the RR, the "show bgp neighbor" counters for advertised prefixes increment correspondingly to reflect a large number of prefixes advertised to PE.
Conditions:
This issue occurs when a VRF on the PE is unconfigured and reconfigured within a short interval.
Workaround:
Have a interval of approximately one minute before reconfiguring a VRF after unconfiguring it.
Recovery:
No recovery is necessary if the workaround is used.
•
Basic Description:
P2MP perm traffic loss on the tail doing 'clear pim topology.'
Symptom:
This issue occurs with permanent P2MP multicast traffic loss.
Conditions:
This condition occurs when doing a 'clear pim topology' on the tail node.
Workaround:
Restart the PIM process (process restart) instead of doing "clear pim topology".
Alternatively, remove the IGMP/PIM Join on the decap and rejoin.
Recovery:
Restart the PIM process (process restart).
or
Remove/add multicast-routing config related to P2MP.
or
Remove S,G IGMP/PIM. Join on decap, and rejoin the S,G.
•
Basic Description:
Harmless sysdb_mc timeout messages periodically pops up in the console
Symptom:
Harmless sysdb_mc timeout messages periodically pops up in the console, for example:
RP/0/RSP1/CPU0:Apr 27 00:41:58.486 : sysdb_mc[380]: %SYSDB-SMC-7-TIMEOUT :Message #0x2004bd2e state:0x13fe5326, gid(1011),destined for shared plane,timed out having received 0 of 1 expected responses: returning error to clientUnknown. Check for potential transport issues within the system, or deadlockedSysDB processes.Conditions:
This issue occurs with an RSP switchover.
Workaround:
None. However, these messages are level-7 messages and are not functionally impacting.
Recovery:
Issue a RSP switchover.
•
Basic Description:
SNMP bulk config, or load from saved config, or rollback shows error.
Symptom:
SNMP bulk configuration, or load from saved configuration, or rollback (which include multiple SNMP commands) can cause following messages to print on console.
RP/0/RSP0/CPU0:Apr 27 19:26:59.446 : snmpd[1112]: %SNMP-SNMP-4-VIEWOID_NOT_FOUND : The command "snmp view li-view ifMIB included" could not be applied at this time because the oid "ifMIB" does not belong to a known MIB module.RP/0/RSP0/CPU0:Apr 27 19:26:59.481 : snmpd[1112]: %SNMP-SNMP-4-VIEWOID_NOT_FOUND : The command "snmp view li-view ciscoTap2MIB included" could not be applied at this time because the oid "ciscoTap2MIB" does not belong to a known MIB module.RP/0/RSP0/CPU0:Apr 27 19:26:59.495 : snmpd[1112]: %SNMP-SNMP-4-VIEWOID_NOT_FOUND : The command "snmp view li-view ciscoIpTapMIB included" could not be applied at this time because the oid "ciscoIpTapMIB" does not belong to a known MIB module.Conditions:
SNMP bulk configuration, or load from saved configuration, or rollback (which include multiple SNMP commands) can cause the error messages.
This behavior is observed since the MIB is not loaded and the OID translation is not in place. After few seconds, this gets resolved, and you can query the MIB successfully.
Workaround:
None. When this behavior is observed during SNMP configuration for lawful intercept, it still allows adding taps. Lawful intercept functionality does not impact in any manner.
Recovery:
None. These are harmless messages and do not impact any functionality.
•
Basic Description:
mibd_interfaces crash while polling cIpMRouteNextHopTable.
Symptom:
In Cisco IOS-XR a crash of process mibd_interface might be observed when the mroute mib is polled.
Conditions:
Multicast is configured. The OID cIpMRouteNextHopTable of mroute mib is polled.
Workaround:
Not available.
Recovery:
The process is restarted automatically.
•
Basic Description:
Not able to modify RPL and delete prefix-set in a single commit.
Symptom:
When a policy that is attached directly or indirectly to an attach point needs to be modified, a single commit operation cannot be performed when:
–
–
Workaround:
The commit must be performed in two steps:
1.
2.
Caveats Specific to the Cisco CRS-1 Router
The following open caveats are specific to the Cisco CRS-1 platform:
•
Basic Description:
Auto FPD upgrade is not triggered in some conditions.
Symptom:
On a Cisco CRS-1 or Cisco CRS-3 router, FPD auto-upgrade is configured. During an IOS-XR upgrade, the fpd auto-upgrade is not triggered. The output of the "admin" mode CLI command "show hw-module fpd location all" still displays nodes with a fpga or rommon down revision.
Conditions:
FPD auto-upgrade is only triggered if the new IOS-XR version contains a newer FPD PIE that has newer firmware versions as in the previous release.
RommonA is not upgraded by FPD auto-upgrade. FPD auto-upgrade is not triggered at software downgrades.
Workaround:
Not applicable.
Recovery:
User should manually perform the upgrade using the upgrade hw-module fpd CLI from the admin mode. This ensures that the rommon/fpga versions for that node are compatible with the current image and are in sync with the FPD package that is currently active on the router. Subsequently, auto-fpd upgrade should work for such a node whenever there is a change in the FPD package between the From and To images.
•
Basic Description:
Fabric plane mcast down after rack reload on Cisco CRS Multishelf.
Symptom:
On a Cisco CRS Multishelf system, the "Oper State" of a fabric plane might be "MCAST_DOWN" after a Line Card Chassis (LCC) reload.
Conditions:
An LCC is reloaded on a CRS Multishelf system. The problem is not consistently reproducible.
Workaround:
None available.
Recovery:
Shut/no shut down the affected fabric plane in admin config mode.
See the following example:
(admin-config)#controllers fabric plane 2 shutdown(admin-config)#commit(admin-config)#no controllers fabric plane 2 shutdown(admin-config)#commit•
Basic Description:
Multiple processes blocked on sysdb_svr_local on LC after reload
Symptom:
After a reload of a Cisco CRS-1, the following error message might be observed from sfe_drvr process on all fabric SMs:
SP/0/SM4/SP:Mar 8 23:06:16.601 : sfe_drvr[120]: %FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_SLOW : SEA ASIC: s3/0/SM4/SP/3, MC NQ Err: HP Err Dest Bitmap: 0x10000000 HP Enabled Queues: 0xc3333333 LP Err Dest Bitmap: 0x0 LP Enabled Queues: 0xc3333333.Conditions:
The NQ Errors of the above message are observed for destinations on a particular LC. In parallel the interface configurations of the affected LC appears in the preconfigure mode. Many processes on the LC are blocked on sysdb_svr_local.
Workaround:
None available.
Recovery:
Restart of SLD process should recover the issue.
•
Basic Description:
Harddisk Disk Mirroring failed after rack OIR.
Symptom:
On a Cisco CRS-1 or Cisco CRS-3, harddisk mirroring may fail sync with resource busy error after RP reload.
Conditions:
1.
2.
3.
The problem also applies to Cisco IOS XR Release 4.0.1.
Workaround:
None available.
Recovery:
Disable harddisk mirroring in admin config mode.
Caveats Specific to the Cisco CRS-3 Router
The following open caveats are specific to the Cisco CRS-3 platform:
•
Basic Description:
EDM request Timeouts from online_diag_lc for Cisco CRS-3 LCs in steady state.
Symptom:
In Cisco IOS-XR, SYSDB-SYSDB-6-TIMEOUT_EDM syslog messages might be displayed steadily.
Conditions:
A syslog message like the following example might be displayed steadily:
RP/0/RP0/CPU0:Mar 29 10:20:05.152 : sysdb_svr_admin[346]: %SYSDB-SYSDB-6-TIMEOUT_EDM : EDM request for 'admin/oper/fabric/rack/2/lport/s1tx/' from 'online_diag_lc' (jid 227, node 2/3/CPU0). No response from 'fsdb_server' (jid 211, node 2/RP1/CPU0) within the timeout period (100 seconds).It indicates that certain EDM requests are rejected by the sysdb. The reason is that the sysdb is not able to allocate memory for replies because of memory fragmentation. The probability of hitting this problem is low.
Workaround:
Not available.
Recovery:
Restart the sysdb_svr_admin process: process restart sysdb_svr_admin
•
Basic Description:
show controllers fabric plane statistics shows garbage values sometimes.
Symptom:
The output of the admin CLI command, show controllers fabric plane all statistics, might display large garbage values in the "Cell" columns.
Conditions:
The problem might be observed when the above command is executed several times very fast in a row.
Workaround:
If the command is issued serially, allow a couple of seconds time between each execution.
Recovery:
Rerun the command if the problem is present after some time.
Upgrading Cisco IOS XR Software
Cisco IOS XR software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes. Software packages can be upgraded or downgraded on all supported card types, or on a single card (node).
Software packages are installed from package installation envelope (PIE) files that contain one or more software components.
The following URL contains links to information about how to upgrade Cisco IOS XR software:
http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html
Migrating Cisco CRS-1 to Cisco CRS-3
For information about migrating from a Cisco CRS-1 to a Cisco CRS-3 chassis, refer to the Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide at the following URL:
http://www.cisco.com/en/US/products/ps5763/prod_installation_guides_list.html
Troubleshooting
For information on troubleshooting Cisco IOS XR software, refer to the Cisco IOS XR Troubleshooting Guide for the Cisco CRS Router and the Cisco IOS XR Getting Started Guide for the Cisco CRS Router.
Related Documentation
The most current Cisco CRS Router hardware documentation is located at the following URL:
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
The Cisco IOS XR software documentation set includes the Cisco IOS XR software configuration guides and command references, as well as a getting started guide.
The most current Cisco CRS Router software documentation is located at the following URL:
http://www.cisco.com/en/US/products/ps5763/tsd_products_support_series_home.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2011 Cisco Systems, Inc. All rights reserved.
